#:########################################################################################:#
# TITLE: MAIN ENTRANCE LIGHTSWITCH
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-entrancelightswitch.yaml
#:########################################################################################:#
# VERSIONS:
# V3.8 2026-02-25 Updated yaml to zorruno layout V1.1
# V3.7 2025-09-15 Upload to this lightswitch from copy
#:########################################################################################:#
# HARDWARE:
# - Zemismart KS-811 Double push button (ESP8266)
# - Status LED: GPIO2
# - Buttons: GPIO16 (Button 1), GPIO5 (Button 2)
# - Relays: GPIO13 (Relay 1), GPIO12 (Relay 2)
# - Pinout/schematic: https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
#:########################################################################################:#
# OPERATION NOTES:
# - Button 1 toggles Relay 1 (Entrance Lights).
# - Relay 2 is forced ON at boot (permanently on) to power an external light controller.
# - Button 2 is currently not assigned to any action (relay remains ON from boot).
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant OFFLINE, but Network and MQTT ONLINE
#    - Physical button control continues (Relay 1 toggles locally)
#    - Relay 2 remains ON (external controller stays powered)
# b) MQTT OFFLINE (but WiFi/Network and HA API ONLINE)
#    - Physical button control continues
#    - HA control continues via API
# c) Entire WiFi/Network OFFLINE
#    - Physical button control continues (local operation)
#    - Relay 2 remains ON (external controller stays powered)
#    - Accurate time is NOT needed (SNTP not needed)
#:########################################################################################:#

#:########################################################################################:#
# SUBSTITUTIONS: Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
  # Device Naming
  device_name: "esp-entrancelightswitch"
  friendly_name: "Main Entrance Lightswitch (2)"
  description_comment: "Main Entrance lightswitch using a Zemismart KS-811 Double Push Button. Main Lights (1), Bench Lights (2) (Layout V1.1)"
  device_area: "Kitchen" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.

  # Project Naming
  project_name: "Zemismart Technologies.KS-811 Double" # Project Details
  project_version: "v3.8" # Project version denotes release of yaml file, allowing checking of deployed vs latest version

  # Passwords & Secrets (unfortunately you can't use substitutions inside secrets names)
  api_key: !secret esp-api_key
  ota_pass: !secret esp-ota_pass
  static_ip_address: !secret esp-entrancelightswitch_ip
  #mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
  #mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic

  # If we are changing IP addresses, you must update the current IP address here, otherwise it remains
  # Don't forget to switch it back when changed.
  current_ip_address: ${static_ip_address}

  # Device Settings
  log_level: "INFO" # NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
  update_interval: "60s" # update time for general sensors etc

  # MQTT LOCAL Controls
  #mqtt_device_name: "bedroom2-lights"
  #mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}"
  #mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}"

  # Switch Naming
  switch_1_name: "Entrance Lights"
  switch_2_name: "External Light Controller" # permanently on, and pushbutton sends MQTT (not configured here)
  #switch_3_name: "Nil"

#:########################################################################################:#
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
  #### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
  common_wifi: !include
    file: common/network_common.yaml
    vars:
      local_device_name: "${device_name}"
      local_static_ip_address: "${static_ip_address}"
      local_ota_pass: "${ota_pass}"
      local_current_ip_address: "${current_ip_address}"

  #### HOME ASSISTANT API (choose encryption or no encryption options) ####
  common_api: !include
    file: common/api_common.yaml
    #file: common/api_common_noencryption.yaml
    vars:
      local_api_key: "${api_key}"

  #### MQTT ####
  common_mqtt: !include
    file: common/mqtt_common.yaml
    vars:
      local_device_name: "${device_name}"

  #### WEB PORTAL ####
  #common_webportal: !include common/webportal_common.yaml

  #### SNTP (Only use if you want/need accurate timeclocks) ####
  #common_sntp: !include common/sntp_common.yaml

  #### DIAGNOSTICS Sensors ####
  diag_basic: !include common/include_basic_diag_sensors.yaml
  diag_more: !include common/include_more_diag_sensors.yaml
  #diag_debug: !include common/include_debug_diag_sensors.yaml
  #diag_resetcount: !include common/include_resetcount_diag_sensors.yaml

#:########################################################################################:#
# ESPHOME:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
  name: "${device_name}"
  friendly_name: "${friendly_name}"
  comment: "${description_comment}" # Appears on the esphome page in HA
  area: "${device_area}"
  project:
    name: "${project_name}"
    version: "${project_version}"
  on_boot:
    priority: 200
    then:
      - switch.turn_on: Relay_2 # Permanently on

#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK:
# https://esphome.io/components/esp8266.html
#:########################################################################################:#
esp8266:
  board: esp01_1m
  early_pin_init: false # Recommended false where switches are involved. Defaults to true.
  board_flash_mode: dout # Default is dout

#:########################################################################################:#
# LOGGING:
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
  level: "${log_level}"
  #baud_rate: 0

#:########################################################################################:#
# STATUS LED:
# https://esphome.io/components/status_led.html
#:########################################################################################:#
status_led:
  pin:
    number: GPIO2
    inverted: true

#:########################################################################################:#
# BINARY SENSORS:
# https://esphome.io/components/binary_sensor/
#:########################################################################################:#
binary_sensor:
  - platform: gpio
    pin:
      number: GPIO16
      mode: INPUT
      inverted: true
    use_interrupt: false # GPIO16 pin doesn't support interrupts so use polling. Only suppresses a warning.
    name: "Button 1: ${switch_1_name}"
    on_press:
      - switch.toggle: Relay_1

  - platform: gpio
    pin:
      number: GPIO05
      mode: INPUT
      inverted: true
    name: "Button 2: ${switch_2_name}"
    #on_press:
    #  - switch.toggle: Relay_2

  # KS-811-2 is a double only
  #- platform: gpio
  #  pin:
  #    number: GPIO4
  #    mode: INPUT
  #    inverted: true
  #  name: "Button 3: ${switch_3_name}"
  #  on_press:
  #    - switch.toggle: Relay_3

#:########################################################################################:#
# SWITCH COMPONENT:
# https://esphome.io/components/switch/
#:########################################################################################:#
switch:
  - platform: gpio
    name: "Relay 1: ${switch_1_name}"
    pin: GPIO13
    id: Relay_1

  - platform: gpio
    name: "Relay 2: ${switch_2_name}"
    pin: GPIO12
    id: Relay_2

  # KS-811-2 is a double only
  #- platform: gpio
  #  name: "Relay 3: ${switch_3_name}"
  #  pin: GPIO14
  #  id: Relay_3