#############################################
#############################################
# ESP32
# Bluetooth Proxy
#############################################
#############################################

#############################################
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#############################################
substitutions:
  devicename: "esp-entbtproxy"
  friendly_name: "Outside Entrance Bluetooth Proxy"
  description_comment: "D1 Mini ESP32 outside entranceway with BT Proxy"
  api_key: !secret esp-entbtproxy_api_key #unfortunately you can't use substitutions in secrets names
  ota_pass: !secret esp-entbtproxy_ota_pass #unfortunately you can't use substitutions in secrets names
  static_ip_address: !secret esp-entbtproxy_ip
  log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
  update_interval: "60s" # update time for for general sensors etc
  room: "Entranceway"  # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.  

  #############################################
  # SPECIFIC PROJECT VARIABLE SUBSTITUTIONS
  #############################################
  #
  #

#############################################
# Included Common Packages
# https://esphome.io/components/esphome.html
#############################################
packages:
  common_wifi: !include
    file: common/network_common.yaml
    vars:
      local_static_ip_address: ${static_ip_address}
      local_ota_pass: ${ota_pass}
  common_api: !include
    file: common/api_common.yaml
    vars:
      local_api_key: ${api_key}
#  common_webportal: !include
#    file: common/webportal_common.yaml
  common_mqtt: !include
    file: common/mqtt_common.yaml
  common_sntp: !include
    file: common/sntp_common.yaml
  common_general_sensors: !include
    file: common/sensors_common.yaml
    vars:
      local_friendly_name: ${friendly_name}
      local_update_interval: ${update_interval}
  
#############################################
# ESPHome
# https://esphome.io/components/esphome.html
#############################################
esphome:
  name: ${devicename}
  friendly_name: ${friendly_name}
  comment: ${description_comment} #appears on the esphome page in HA
  min_version: 2024.6.0  #

#############################################
# ESP Platform and Framework
# https://esphome.io/components/esp32.html
#############################################
esp32:
  board: esp32dev
  framework:
    #type: arduino
    type: esp-idf  #Suggested Use ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang. 
    version: recommended #recommended, latest or dev

#############################################    
# ESPHome Logging Enable
# https://esphome.io/components/logger.html
############################################# 
logger:
  level: ${log_level}  #INFO Level suggested, or DEBUG for testing
  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
  #esp8266_store_log_strings_in_flash: false
  #tx_buffer_size: 64

#############################################    
# Bluetooth
# https://esphome.io/components/bluetooth_proxy.html
# https://esphome.io/components/esp32_ble_tracker.html
# Remember that this takes a LOT of processing. On the 
# ESP32, enable the  IDF framework, and disable the 
# Web server component.  Changing to the IDF framework 
# needs to be via cable not OTA to change the
# partition setup.
#############################################  
bluetooth_proxy:
  active: true

esp32_ble_tracker:
  scan_parameters:
    # We currently use the defaults to ensure Bluetooth
    # can co-exist with WiFi In the future we may be able to
    # enable the built-in coexistence logic in ESP-IDF
    active: true