#:########################################################################################:# # TITLE: ROCK TUMBLER POWER MONITOR # zorruno.com layout v1.1 2026 #:########################################################################################:# # REPO: # https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-rocktumbler.yaml #:########################################################################################:# # VERSIONS: # V1.4 2026-02-25 Updated yaml to zorruno layout V1.1 # V1.3 2025-08-27 Changed to Athom V2 # V1.2 2025-06-15 Changed to Athom V1 # V1.1 2025-06-12 Tidyups and packages added #:########################################################################################:# # HARDWARE: # - Athom Smart Plug V2 (ESP8285) with power monitoring + relay # - Reference config: github://athom-tech/athom-configs/athom-smart-plug.yaml #:########################################################################################:# # OPERATION NOTES: # - This device provides power monitoring (via common Athom V2 package) and a controllable relay. # - "Power On State" select controls what the relay does after reboot: # - Always Off # - Always On # - Restore Previous State # - Power monitoring sensor update interval is set via substitutions. #:########################################################################################:# # MQTT COMMANDS: # - None device-specific in this YAML (uses common_mqtt package for standard device MQTT support). #:########################################################################################:# # OFFLINE NOTES: # a) Home Assistant OFFLINE, but Network and MQTT ONLINE # - Device continues operating and can be controlled via MQTT (if your common_mqtt exposes it). # - Power monitoring continues locally and publishes via MQTT if configured. # b) MQTT OFFLINE (but WiFi/Network and HA API ONLINE) # - Device remains controllable via Home Assistant API. # - MQTT publishing/commands will fail while MQTT is down. # c) Entire WiFi/Network OFFLINE # - Device continues operating locally (relay + power monitoring). # - SNTP is not needed (no timeclocks used in this YAML). #:########################################################################################:# #:########################################################################################:# # SUBSTITUTIONS: Specific device variable substitutions # If NOT using a secrets file, just replace these with the passwords etc (in quotes) #:########################################################################################:# substitutions: # Device Naming device_name: "esp-rocktumbler" friendly_name: "Rock Tumbler Power" description_comment: "Rock Tumbler Power :: Athom Smart Plug Power V2 (Layout V1.1)" device_area: "Laundry" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant. # Project Naming project_name: "Athom Technology.Smart Plug V2" project_version: "v1.4" # Updated yaml to zorruno layout V1.1 # Passwords (unfortunately you cannot use substitutions inside secrets names) api_key: !secret esp-api_key ota_pass: !secret esp-ota_pass static_ip_address: !secret esp-rocktumbler_ip # If we are changing IP addresses, you must update the current IP address here, otherwise it remains # Don't forget to switch it back when changed. current_ip_address: ${static_ip_address} # Device General Settings log_level: "NONE" # NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE update_interval: "60s" # update time for for general sensors etc # Device Specific Settings (Athom Power Monitor Plug V2) relay_icon: "mdi:power-socket-au" current_limit: "10" # Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16. sensor_update_interval: "10s" relay_restore_mode: RESTORE_DEFAULT_ON hide_energy_sensor: "true" #:########################################################################################:# # PACKAGES: Included Common Packages # https://esphome.io/components/packages.html #:########################################################################################:# packages: #### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode #### common_wifi: !include file: common/network_common.yaml vars: local_device_name: "${device_name}" local_static_ip_address: "${static_ip_address}" local_ota_pass: "${ota_pass}" local_current_ip_address: "${current_ip_address}" #### HOME ASSISTANT API (choose encryption or no encryption options) #### common_api: !include file: common/api_common.yaml #file: common/api_common_noencryption.yaml vars: local_api_key: "${api_key}" #### MQTT #### common_mqtt: !include file: common/mqtt_common.yaml vars: local_device_name: "${device_name}" #### WEB PORTAL #### #common_webportal: !include common/webportal_common.yaml #### SNTP (Only use if you want/need accurate timeclocks) #### common_sntp: !include common/sntp_common.yaml #### DIAGNOSTICS Sensors #### diag_basic: !include common/include_basic_diag_sensors.yaml diag_more: !include common/include_more_diag_sensors.yaml #diag_debug: !include common/include_debug_diag_sensors.yaml #diag_resetcount: !include common/include_resetcount_diag_sensors.yaml #### Device Specific included packages: Athom Power Monitor Plug V2 #### common_athompowermonV2: !include file: common/athompowermonv2_common.yaml vars: local_friendly_name: "${friendly_name}" local_current_limit: "${current_limit}" sensor_update_interval: "${sensor_update_interval}" relay_restore_mode: "${relay_restore_mode}" power_plug_type: "${relay_icon}" hide_energy_sensor: "${hide_energy_sensor}" #:########################################################################################:# # ESPHOME: # https://esphome.io/components/esphome.html #:########################################################################################:# esphome: name: "${device_name}" friendly_name: "${friendly_name}" comment: "${description_comment}" # Appears on the esphome page in HA area: "${device_area}" name_add_mac_suffix: false min_version: 2024.6.0 project: name: "${project_name}" version: "${project_version}" on_boot: priority: 600 then: - select.set_index: id: power_mode index: !lambda |- return id(restore_mode) - 1; - lambda: |- switch (id(restore_mode)) { case 1: { id(relay).turn_off(); break; } case 2: { id(relay).turn_on(); break; } default: { break; } } #:########################################################################################:# # ESP PLATFORM AND FRAMEWORK: # https://esphome.io/components/esp8266/ #:########################################################################################:# esp8266: board: esp8285 restore_from_flash: true # mainly for calculating cumulative energy, but not that important here early_pin_init: true preferences: flash_write_interval: 5min mdns: disabled: false #:########################################################################################:# # LOGGING: ESPHome Logging Enable # https://esphome.io/components/logger.html #:########################################################################################:# logger: level: "${log_level}" baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM) #:########################################################################################:# # GLOBAL VARIABLES: # https://esphome.io/guides/automations.html#global-variables #:########################################################################################:# globals: # 0 = Always_Off, 1 = Restore_Power_Off, 2 = Always_On - id: restore_mode type: int restore_value: yes initial_value: "2" #:########################################################################################:# # SELECT COMPONENT: # https://esphome.io/components/select/index.html #:########################################################################################:# select: - platform: template name: "Power On State" id: power_mode optimistic: true icon: mdi:electric-switch options: - "Always Off" - "Always On" - "Restore Previous State" on_value: then: - lambda: |- id(restore_mode) = i + 1;