289 lines
9.7 KiB
YAML
289 lines
9.7 KiB
YAML
#############################################
|
||
#############################################
|
||
# Mi Smart LED Desk Lamp 1S
|
||
# ESP32, LED Strip with variable white colour temp, rotary encoder
|
||
# https://www.mi.com/global/product/mi-led-desk-lamp-1s/
|
||
#############################################
|
||
#############################################
|
||
|
||
#############################################
|
||
# SECRETS
|
||
# Secrets file is usually at config/secrets.yaml
|
||
# or config/esphome/secrets.yaml
|
||
# depending on your setup with HA
|
||
#############################################
|
||
# SECRETS FILE needs these specific secrets:
|
||
# esp-midesklamp1s_api_key
|
||
# esp-midesklamp1s_ota_pass
|
||
# esp-midesklamp1s_static_ip (Optional)
|
||
# esp-midesklamp1s_gateway (Optional)
|
||
# esp-midesklamp1s_subnet (Optional)
|
||
#
|
||
# SECRETS FILE needs these generic Secrets:
|
||
# wifi_ssid
|
||
# wifi_password
|
||
# fallback_ap_password
|
||
# mqtt_server
|
||
# mqtt_username
|
||
# mqtt_password
|
||
# web_server_username (Optional)
|
||
# web_server_password (Optional)
|
||
#############################################
|
||
|
||
|
||
#############################################
|
||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||
# If NOT using a secrets file, just replace
|
||
# these with the passwords etc (in quotes)
|
||
#############################################
|
||
substitutions:
|
||
device_name: esp-midesklamp1s
|
||
friendly_name: "Mi 1S Lamp Office"
|
||
description_comment: "Office Desk Lamp with variable white colour temp and rotary encoder for brightness"
|
||
api_key: !secret esp-midesklamp1s_api_key # unfortunately you can't use substitutions in secrets names
|
||
ota_pass: !secret esp-midesklamp1s_ota_pass # unfortunately you can't use substitutions in secrets names
|
||
static_ip_address: !secret esp-midesklamp1s_ip
|
||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||
update_interval: "60s" # update time for for general sensors etc
|
||
room: "Office" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||
|
||
##########################################################################################
|
||
# PACKAGES: Included Common Packages
|
||
# https://esphome.io/components/packages.html
|
||
##########################################################################################
|
||
packages:
|
||
common_wifi: !include
|
||
file: common/network_common.yaml
|
||
vars:
|
||
local_device_name: "${device_name}"
|
||
local_static_ip_address: "${static_ip_address}"
|
||
local_ota_pass: "${ota_pass}"
|
||
common_api: !include
|
||
file: common/api_common.yaml
|
||
vars:
|
||
local_api_key: "${api_key}"
|
||
#common_webportal: !include
|
||
# file: common/webportal_common.yaml
|
||
common_mqtt: !include
|
||
file: common/mqtt_common.yaml
|
||
vars:
|
||
local_device_name: "${device_name}"
|
||
common_sntp: !include
|
||
file: common/sntp_common.yaml
|
||
common_general_sensors: !include
|
||
file: common/sensors_common.yaml
|
||
vars:
|
||
local_friendly_name: "${friendly_name}"
|
||
local_update_interval: "${update_interval}"
|
||
|
||
#############################################
|
||
# ESPHome
|
||
# https://esphome.io/components/esphome.html
|
||
#############################################
|
||
esphome:
|
||
name: ${device_name}
|
||
friendly_name: ${friendly_name} # appears as main name on the esphome page in HA
|
||
comment: ${description_comment} # appears as comment on the esphome page in HA
|
||
area: ${room}
|
||
#min_version: 2024.6.0
|
||
|
||
#############################################
|
||
# ESP Platform and Framework
|
||
# https://esphome.io/components/esp32.html
|
||
#############################################
|
||
esp32:
|
||
board: esp32doit-devkit-v1
|
||
framework:
|
||
type: esp-idf # Suggest using the ESP-IDF Framework. Changing from 'arduino' to 'esp-idf' needs a cabled flash to correct partitions
|
||
version: recommended # recommended, latest or dev
|
||
|
||
# these just for the esp32doit-devkit-v1 and Mi S Lamp
|
||
sdkconfig_options:
|
||
CONFIG_FREERTOS_UNICORE: y
|
||
advanced:
|
||
ignore_efuse_mac_crc: true
|
||
ignore_efuse_custom_mac: true
|
||
|
||
#############################################
|
||
# ESPHome Logging Enabl
|
||
# https://esphome.io/components/logger.html
|
||
#############################################
|
||
logger:
|
||
level: ${log_level} # INFO Level suggested, or DEBUG for testing
|
||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||
#esp8266_store_log_strings_in_flash: false
|
||
#tx_buffer_size: 64
|
||
|
||
#############################################
|
||
# Time Component
|
||
# https://esphome.io/components/time/index.html#time-component
|
||
# Sync with HA Time. Probably not really necessary.
|
||
#############################################
|
||
#time:
|
||
# - platform: homeassistant
|
||
# id: homeassistant_time
|
||
|
||
#############################################
|
||
# General Sensors
|
||
# https://esphome.io/components/sensor/index.html
|
||
#############################################
|
||
sensor:
|
||
# Mi Desk Lamp 1S Configuration
|
||
- platform: rotary_encoder
|
||
id: rotation
|
||
pin_a: GPIO27
|
||
pin_b: GPIO26
|
||
resolution: 2
|
||
on_value:
|
||
then:
|
||
- if:
|
||
condition:
|
||
# Check if Button is pressed while rotating
|
||
lambda: "return id(pushbutton).state;"
|
||
then:
|
||
# If Button is pressed, change CW/WW
|
||
- lambda: |-
|
||
auto min_temp = id(light1).get_traits().get_min_mireds();
|
||
auto max_temp = id(light1).get_traits().get_max_mireds();
|
||
auto cur_temp = id(light1).current_values.get_color_temperature();
|
||
auto new_temp = max(min_temp, min(max_temp, cur_temp + (x*10)));
|
||
auto call = id(light1).turn_on();
|
||
call.set_color_temperature(new_temp);
|
||
call.perform();
|
||
else:
|
||
# If Button is not pressed, change brightness
|
||
- light.dim_relative:
|
||
id: light1
|
||
relative_brightness: !lambda |-
|
||
return x / 25.0;
|
||
# Reset Rotation to 0
|
||
- sensor.rotary_encoder.set_value:
|
||
id: rotation
|
||
value: 0
|
||
|
||
#############################################
|
||
# Binary Sensors
|
||
# https://esphome.io/components/binary_sensor/index.html
|
||
#############################################
|
||
binary_sensor:
|
||
- platform: gpio
|
||
id: pushbutton
|
||
pin:
|
||
number: GPIO33
|
||
inverted: True
|
||
mode: INPUT_PULLDOWN
|
||
on_click:
|
||
then:
|
||
- light.toggle:
|
||
id: light1
|
||
transition_length: 0.2s
|
||
|
||
#############################################
|
||
# Base Output Component
|
||
# https://esphome.io/components/output/index.html#base-output-configuration
|
||
#############################################
|
||
output:
|
||
- platform: ledc # Cool White LED PWM
|
||
pin: GPIO2
|
||
id: output_cw
|
||
frequency: 40000Hz
|
||
power_supply: power
|
||
- platform: ledc
|
||
pin: GPIO4 # Warm White LED PWM
|
||
id: output_ww
|
||
power_supply: power
|
||
frequency: 40000Hz
|
||
|
||
#############################################
|
||
# Power Supply Component
|
||
# https://esphome.io/components/power_supply.html#power-supply-component
|
||
#############################################
|
||
power_supply:
|
||
- id: power
|
||
pin: GPIO12
|
||
enable_time: 0s
|
||
keep_on_time: 0s
|
||
|
||
#############################################
|
||
# Light Component
|
||
# https://esphome.io/components/light/index.html#light-component
|
||
#############################################
|
||
light:
|
||
- platform: cwww # https://esphome.io/components/light/cwww.html#cold-white-warm-white-light
|
||
id: light1
|
||
default_transition_length: 0s
|
||
constant_brightness: true
|
||
name: "${friendly_name} Light"
|
||
cold_white: output_cw
|
||
warm_white: output_ww
|
||
cold_white_color_temperature: 4800 K
|
||
warm_white_color_temperature: 2500 K # 2500k is the original value of the lamp. To correct binning for 2700k to look more like 2700k use 2650k instead
|
||
restore_mode: ALWAYS_OFF
|
||
gamma_correct: 0
|
||
|
||
|
||
|
||
|
||
#globals:
|
||
# - id: fade_brightness
|
||
# type: float
|
||
# initial_value: '0.0'
|
||
# - id: fade_step
|
||
# type: float
|
||
# initial_value: '0.0'
|
||
|
||
|
||
# This script fades the light ON to full brightness over 20 seconds.
|
||
#script:
|
||
# - id: fade_on
|
||
# then:
|
||
# # First, capture the current brightness.
|
||
# - lambda: |-
|
||
# // If the light is off, current brightness will be 0.0.
|
||
# float current = id(light1).current_values.get_brightness();
|
||
# id(fade_brightness) = current;
|
||
# // Compute the step size so that after 100 steps (200ms each) we reach full brightness.
|
||
# id(fade_step) = (1.0 - current) / 100.0;
|
||
# - repeat:
|
||
# count: 100
|
||
# then:
|
||
# - lambda: |-
|
||
# id(fade_brightness) += id(fade_step);
|
||
# if (id(fade_brightness) > 1.0) {
|
||
# id(fade_brightness) = 1.0;
|
||
# }
|
||
# // Update the light’s brightness.
|
||
# id(light1).turn_on({ brightness: id(fade_brightness) });
|
||
# - delay: 200ms
|
||
|
||
# This script fades the light OFF over 20 seconds.
|
||
# - id: fade_off
|
||
# then:
|
||
# - lambda: |-
|
||
# // Capture current brightness (if the light is on).
|
||
# float current = id(light1).current_values.get_brightness();
|
||
# id(fade_brightness) = current;
|
||
# // Compute step size so that after 100 steps we reach 0.
|
||
# id(fade_step) = current / 100.0;
|
||
# - repeat:
|
||
# count: 100
|
||
# then:
|
||
# - lambda: |-
|
||
# id(fade_brightness) -= id(fade_step);
|
||
# if (id(fade_brightness) < 0.0) {
|
||
# id(fade_brightness) = 0.0;
|
||
# }
|
||
# id(light1).turn_on({ brightness: id(fade_brightness) });
|
||
# - delay: 200ms
|
||
# # Finally, ensure the light is turned off.
|
||
# - lambda: |-
|
||
# id(light1).turn_off();
|
||
|
||
#switch:
|
||
# - platform: template
|
||
# name: "Fade on and off"
|
||
# id: virtual_switch
|
||
# turn_on_action:
|
||
# - script.execute: fade_on
|
||
# turn_off_action:
|
||
# - script.execute: fade_off |