168 lines
5.5 KiB
YAML
168 lines
5.5 KiB
YAML
#############################################
|
|
#############################################
|
|
# OFFICE MAIN LIGHTSWITCH
|
|
# V2.0 2025-06-05 YAML Tidyups
|
|
# V1.0 2025-05-31 Initial Version
|
|
#############################################
|
|
# Zemismart KS-811 Triple push button
|
|
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
|
#
|
|
# NOTES
|
|
# -
|
|
#
|
|
#############################################
|
|
#############################################
|
|
|
|
#############################################
|
|
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
|
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
|
#############################################
|
|
substitutions:
|
|
# Device Naming
|
|
device_name: "esp-officelights"
|
|
friendly_name: "Office Main Lightswitch (3)"
|
|
description_comment: "Office Main Lightswitch using a Zemismart KS-811 Triple Push Button. Bunker Light A (1), Spare A (2), Spare B (3)"
|
|
device_area: "Office" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
|
|
|
# Project Naming
|
|
project_name: "Zemismart Technologies.KS-811 Triple" # Project Details
|
|
project_version: "v2.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
|
|
|
# Passwords
|
|
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
|
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
|
static_ip_address: !secret esp-officelights_ip
|
|
|
|
# Device Settings
|
|
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
|
update_interval: "60s" # update time for for general sensors etc
|
|
|
|
# Switch Naming
|
|
switch_1_name: "Nighttime Lights" # Only one light (Bunker Light) actually connected to this relay
|
|
switch_2_name: "Daytime Lights" # This is virtual only, no power connected to 2nd relay
|
|
switch_3_name: "Spare" # This is virtual only, no power connected to 3rd relay
|
|
|
|
##########################################################################################
|
|
# PACKAGES: Included Common Packages
|
|
# https://esphome.io/components/packages.html
|
|
##########################################################################################
|
|
packages:
|
|
common_wifi: !include
|
|
file: common/network_common.yaml
|
|
vars:
|
|
local_device_name: "${device_name}"
|
|
local_static_ip_address: "${static_ip_address}"
|
|
local_ota_pass: "${ota_pass}"
|
|
common_api: !include
|
|
file: common/api_common.yaml
|
|
vars:
|
|
local_api_key: "${api_key}"
|
|
#common_webportal: !include
|
|
# file: common/webportal_common.yaml
|
|
common_mqtt: !include
|
|
file: common/mqtt_common.yaml
|
|
vars:
|
|
local_device_name: "${device_name}"
|
|
common_sntp: !include
|
|
file: common/sntp_common.yaml
|
|
common_general_sensors: !include
|
|
file: common/sensors_common.yaml
|
|
vars:
|
|
local_friendly_name: "${friendly_name}"
|
|
local_update_interval: "${update_interval}"
|
|
|
|
#############################################
|
|
# ESPHome
|
|
# https://esphome.io/components/esphome.html
|
|
#############################################
|
|
esphome:
|
|
name: "${device_name}"
|
|
friendly_name: "${friendly_name}"
|
|
comment: "${description_comment}" # Appears on the esphome page in HA
|
|
area: "${device_area}"
|
|
project:
|
|
name: "${project_name}"
|
|
version: "${project_version}"
|
|
# on_boot:
|
|
# priority: 200
|
|
# then:
|
|
# - switch.turn_on: Relay_3
|
|
|
|
#############################################
|
|
# ESP Platform and Framework
|
|
# https://esphome.io/components/esp32.html
|
|
#############################################
|
|
esp8266:
|
|
board: esp01_1m
|
|
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
|
board_flash_mode: dout # Default is dout
|
|
|
|
#############################################
|
|
# ESPHome Logging Enable
|
|
# https://esphome.io/components/logger.html
|
|
#############################################
|
|
logger:
|
|
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
|
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
|
#esp8266_store_log_strings_in_flash: false
|
|
#tx_buffer_size: 64
|
|
id: logger_id
|
|
|
|
#############################################
|
|
# STATUS LED
|
|
# https://esphome.io/components/status_led.html
|
|
#############################################
|
|
status_led:
|
|
pin:
|
|
number: GPIO2
|
|
inverted: yes
|
|
|
|
#############################################
|
|
# BINARY SENSORS
|
|
# https://esphome.io/components/binary_sensor/
|
|
#############################################
|
|
binary_sensor:
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO16
|
|
mode: INPUT
|
|
inverted: True
|
|
name: "Button 1: ${switch_1_name}"
|
|
on_press:
|
|
- switch.toggle: Relay_1
|
|
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO05
|
|
mode: INPUT
|
|
inverted: True
|
|
name: "Button 2: ${switch_2_name}"
|
|
on_press:
|
|
- switch.toggle: Relay_2
|
|
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO4
|
|
mode: INPUT
|
|
inverted: True
|
|
name: "Button 3: ${switch_3_name}"
|
|
on_press:
|
|
- switch.toggle: Relay_3
|
|
|
|
#############################################
|
|
# SWITCH COMPONENT
|
|
# https://esphome.io/components/switch/
|
|
#############################################
|
|
switch:
|
|
- platform: gpio
|
|
name: "Relay 1: ${switch_1_name}"
|
|
pin: GPIO13
|
|
id: Relay_1
|
|
- platform: gpio
|
|
name: "Relay 2: ${switch_2_name}"
|
|
pin: GPIO12
|
|
id: Relay_2
|
|
- platform: gpio
|
|
name: "Relay 3: ${switch_3_name}"
|
|
pin: GPIO14
|
|
id: Relay_3 |