zorruno
1206 lines
45 KiB
YAML
1206 lines
45 KiB
YAML
#:########################################################################################:#
|
|
# PACKAGE: OpenHASP Thermostat / Gas Heater Control
|
|
# VERSION: v1.5 (2026-06-22)
|
|
# NODE/TOPIC ROOT: hasp/openhasp_1/
|
|
#
|
|
# PAGE 1: Gas heater / lounge environment
|
|
# - p1b1 = gas heater setpoint large display
|
|
# - p1b2 = actual lounge room temperature display
|
|
# - p1b3 = gas heater setpoint down
|
|
# - p1b4 = gas heater setpoint up
|
|
# - p1b5 = gas heater status text
|
|
# - p1b6 = gas heater operation / flame button
|
|
# - p1b7 = humidity display
|
|
#
|
|
# PAGE 2: Lounge climate heating control
|
|
# - p2b1 = climate.lounge setpoint large display
|
|
# - p2b2 = actual lounge room temperature display
|
|
# - p2b3 = climate.lounge setpoint down 0.5°C
|
|
# - p2b4 = climate.lounge setpoint up 0.5°C
|
|
# - p2b5 = climate.lounge status text
|
|
# - p2b6 = climate.lounge heat mode / sun button
|
|
# - p2b7 = humidity display
|
|
#
|
|
# PAGE 3: Lounge climate cooling control
|
|
# - p3b1 = climate.lounge setpoint large display
|
|
# - p3b2 = actual lounge room temperature display
|
|
# - p3b3 = climate.lounge setpoint down 0.5°C
|
|
# - p3b4 = climate.lounge setpoint up 0.5°C
|
|
# - p3b5 = climate.lounge status text
|
|
# - p3b6 = climate.lounge cool mode / snowflake button
|
|
# - p3b7 = humidity display
|
|
#
|
|
# NOTES:
|
|
# - The large top display is the setpoint for that device/page.
|
|
# - The middle-left temperature display is always the actual lounge room temp.
|
|
# - p1b3/p1b4 are yellow.
|
|
# - p1b6 is grey when OFF/BYPASS, yellow in AUTO, and red flame when firing.
|
|
# - p2b3/p2b4 are pink.
|
|
# - p2b6 turns climate.lounge ON and sets HVAC mode to heat.
|
|
# - p2b6 is pink only when climate.lounge is in heat mode.
|
|
# - p3b3/p3b4 are light blue.
|
|
# - p3b6 toggles climate.lounge OFF if already cooling; otherwise sets COOL.
|
|
# - p3b6 is light blue only when climate.lounge is in cool mode.
|
|
#:########################################################################################:#
|
|
|
|
#:########################################################################################:#
|
|
# MQTT ENTITIES
|
|
#:########################################################################################:#
|
|
|
|
mqtt:
|
|
sensor:
|
|
- name: "Lounge Environment Humidity MQTT"
|
|
unique_id: "lounge_environment_humidity_mqtt"
|
|
state_topic: "viewroad-status/lounge-environment/humidity"
|
|
value_template: >
|
|
{% set raw = value | trim %}
|
|
{% if raw.startswith('{') %}
|
|
{% set j = raw | from_json %}
|
|
{{ j.humidity | default(j.value | default(raw)) }}
|
|
{% else %}
|
|
{{ raw | replace('%', '') | trim }}
|
|
{% endif %}
|
|
|
|
select:
|
|
- name: "OpenHASP Lounge Page"
|
|
unique_id: "openhasp_lounge_page"
|
|
icon: mdi:tablet-dashboard
|
|
state_topic: "hasp/openhasp_1/state/page"
|
|
command_topic: "hasp/openhasp_1/command/page"
|
|
options:
|
|
- "1"
|
|
- "2"
|
|
- "3"
|
|
value_template: >
|
|
{% set raw = value | trim %}
|
|
{% if raw.startswith('{') %}
|
|
{% set j = raw | from_json %}
|
|
{{ j.page | default(raw) }}
|
|
{% else %}
|
|
{{ raw }}
|
|
{% endif %}
|
|
|
|
#:########################################################################################:#
|
|
# AUTOMATIONS
|
|
#:########################################################################################:#
|
|
|
|
automation:
|
|
# -------------------------------------------------------------------------
|
|
# Actual lounge room temperature display on page 1, page 2, and page 3
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_lounge_temp_to_page_text
|
|
alias: "HASP: update lounge actual temperature displays"
|
|
mode: queued
|
|
trigger:
|
|
- platform: state
|
|
entity_id: sensor.lounge_environment_lounge_environment_temperature
|
|
action:
|
|
- service: script.hasp_publish_lounge_temp_displays
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Gas heater status text on page 1
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_heater_status_to_btn_text
|
|
alias: "HASP: update heater status (p1b5.text)"
|
|
mode: queued
|
|
trigger:
|
|
- platform: state
|
|
entity_id:
|
|
- sensor.rinnai_neo_gas_heater_rinnai_neo_gas_heater_status_text
|
|
- select.rinnai_neo_gas_heater_mode
|
|
- switch.rinnai_neo_gas_heater_heater_operation
|
|
- switch.rinnai_neo_gas_heater_rinnai_neo_gas_heater_activate_flame
|
|
action:
|
|
- service: script.hasp_publish_heater_status_text
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Gas heater setpoint large display on page 1
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_setpoint_to_btn_text
|
|
alias: "HASP: update gas heater setpoint (p1b1.text)"
|
|
mode: queued
|
|
trigger:
|
|
- platform: state
|
|
entity_id: sensor.rinnai_neo_gas_heater_setpoint_text
|
|
action:
|
|
- service: script.hasp_publish_heater_setpoint
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Humidity display on page 1, page 2, and page 3
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_humidity_to_btn_text
|
|
alias: "HASP: update humidity displays"
|
|
mode: queued
|
|
trigger:
|
|
- platform: state
|
|
entity_id: sensor.lounge_environment_humidity_mqtt
|
|
action:
|
|
- service: script.hasp_publish_humidity_displays
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Page 1 gas heater setpoint up/down buttons
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_btn_up_press
|
|
alias: "HASP: p1b4 up -> gas heater setpoint UP"
|
|
mode: queued
|
|
trigger:
|
|
- platform: mqtt
|
|
topic: "hasp/openhasp_1/state/p1b4"
|
|
condition:
|
|
- condition: template
|
|
value_template: "{{ trigger.payload_json.event | default('') == 'up' }}"
|
|
action:
|
|
- service: button.press
|
|
target:
|
|
entity_id: button.rinnai_neo_gas_heater_rinnai_neo_gas_heater_setpoint_up
|
|
|
|
- id: hasp_btn_down_press
|
|
alias: "HASP: p1b3 up -> gas heater setpoint DOWN"
|
|
mode: queued
|
|
trigger:
|
|
- platform: mqtt
|
|
topic: "hasp/openhasp_1/state/p1b3"
|
|
condition:
|
|
- condition: template
|
|
value_template: "{{ trigger.payload_json.event | default('') == 'up' }}"
|
|
action:
|
|
- service: button.press
|
|
target:
|
|
entity_id: button.rinnai_neo_gas_heater_rinnai_neo_gas_heater_setpoint_down
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Page 1 gas heater middle flame button
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_btn_heat_toggle
|
|
alias: "HASP: p1b6 up -> gas heater operation toggle"
|
|
mode: queued
|
|
trigger:
|
|
- platform: mqtt
|
|
topic: "hasp/openhasp_1/state/p1b6"
|
|
condition:
|
|
- condition: template
|
|
value_template: "{{ trigger.payload_json.event | default('') == 'up' }}"
|
|
action:
|
|
- service: switch.toggle
|
|
target:
|
|
entity_id: switch.rinnai_neo_gas_heater_heater_operation
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Page 1 gas heater middle button appearance
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_heat_button_state
|
|
alias: "HASP: update gas heat button state (p1b6)"
|
|
mode: restart
|
|
trigger:
|
|
- platform: state
|
|
entity_id:
|
|
- select.rinnai_neo_gas_heater_mode
|
|
- switch.rinnai_neo_gas_heater_heater_operation
|
|
- switch.rinnai_neo_gas_heater_rinnai_neo_gas_heater_activate_flame
|
|
action:
|
|
- service: script.hasp_apply_heat_button_state
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Page 2 and page 3 climate.lounge text and button state updates
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_lounge_climate_to_page2
|
|
alias: "HASP: update lounge climate pages 2 and 3"
|
|
mode: queued
|
|
trigger:
|
|
- platform: state
|
|
entity_id: climate.lounge
|
|
action:
|
|
- service: script.hasp_push_page2_climate_texts
|
|
- service: script.hasp_apply_climate_heat_button_state
|
|
- service: script.hasp_push_page3_climate_texts
|
|
- service: script.hasp_apply_climate_cool_button_state
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Page 2 climate.lounge setpoint down
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_page2_climate_down_press
|
|
alias: "HASP: p2b3 up -> lounge climate setpoint DOWN 0.5"
|
|
mode: queued
|
|
trigger:
|
|
- platform: mqtt
|
|
topic: "hasp/openhasp_1/state/p2b3"
|
|
condition:
|
|
- condition: template
|
|
value_template: "{{ trigger.payload_json.event | default('') == 'up' }}"
|
|
action:
|
|
- service: climate.set_temperature
|
|
target:
|
|
entity_id: climate.lounge
|
|
data:
|
|
temperature: >
|
|
{% set current = state_attr('climate.lounge', 'temperature') | float(20) %}
|
|
{{ (current - 0.5) | round(1) }}
|
|
- delay: "00:00:01"
|
|
- service: script.hasp_push_page2_climate_texts
|
|
- service: script.hasp_push_page3_climate_texts
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Page 2 climate.lounge setpoint up
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_page2_climate_up_press
|
|
alias: "HASP: p2b4 up -> lounge climate setpoint UP 0.5"
|
|
mode: queued
|
|
trigger:
|
|
- platform: mqtt
|
|
topic: "hasp/openhasp_1/state/p2b4"
|
|
condition:
|
|
- condition: template
|
|
value_template: "{{ trigger.payload_json.event | default('') == 'up' }}"
|
|
action:
|
|
- service: climate.set_temperature
|
|
target:
|
|
entity_id: climate.lounge
|
|
data:
|
|
temperature: >
|
|
{% set current = state_attr('climate.lounge', 'temperature') | float(20) %}
|
|
{{ (current + 0.5) | round(1) }}
|
|
- delay: "00:00:01"
|
|
- service: script.hasp_push_page2_climate_texts
|
|
- service: script.hasp_push_page3_climate_texts
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Page 2 climate.lounge heat mode button
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_page2_climate_heat_press
|
|
alias: "HASP: p2b6 up -> lounge climate heat mode"
|
|
mode: queued
|
|
trigger:
|
|
- platform: mqtt
|
|
topic: "hasp/openhasp_1/state/p2b6"
|
|
condition:
|
|
- condition: template
|
|
value_template: "{{ trigger.payload_json.event | default('') == 'up' }}"
|
|
action:
|
|
- service: climate.turn_on
|
|
target:
|
|
entity_id: climate.lounge
|
|
- service: climate.set_hvac_mode
|
|
target:
|
|
entity_id: climate.lounge
|
|
data:
|
|
hvac_mode: heat
|
|
- delay: "00:00:01"
|
|
- service: script.hasp_push_page2_climate_texts
|
|
- service: script.hasp_apply_climate_heat_button_state
|
|
- service: script.hasp_push_page3_climate_texts
|
|
- service: script.hasp_apply_climate_cool_button_state
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Page 3 climate.lounge setpoint down
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_page3_climate_down_press
|
|
alias: "HASP: p3b3 up -> lounge climate setpoint DOWN 0.5"
|
|
mode: queued
|
|
trigger:
|
|
- platform: mqtt
|
|
topic: "hasp/openhasp_1/state/p3b3"
|
|
condition:
|
|
- condition: template
|
|
value_template: "{{ trigger.payload_json.event | default('') == 'up' }}"
|
|
action:
|
|
- service: climate.set_temperature
|
|
target:
|
|
entity_id: climate.lounge
|
|
data:
|
|
temperature: >
|
|
{% set current = state_attr('climate.lounge', 'temperature') | float(20) %}
|
|
{{ (current - 0.5) | round(1) }}
|
|
- delay: "00:00:01"
|
|
- service: script.hasp_push_page2_climate_texts
|
|
- service: script.hasp_push_page3_climate_texts
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Page 3 climate.lounge setpoint up
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_page3_climate_up_press
|
|
alias: "HASP: p3b4 up -> lounge climate setpoint UP 0.5"
|
|
mode: queued
|
|
trigger:
|
|
- platform: mqtt
|
|
topic: "hasp/openhasp_1/state/p3b4"
|
|
condition:
|
|
- condition: template
|
|
value_template: "{{ trigger.payload_json.event | default('') == 'up' }}"
|
|
action:
|
|
- service: climate.set_temperature
|
|
target:
|
|
entity_id: climate.lounge
|
|
data:
|
|
temperature: >
|
|
{% set current = state_attr('climate.lounge', 'temperature') | float(20) %}
|
|
{{ (current + 0.5) | round(1) }}
|
|
- delay: "00:00:01"
|
|
- service: script.hasp_push_page2_climate_texts
|
|
- service: script.hasp_push_page3_climate_texts
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Page 3 climate.lounge cool mode button
|
|
# - If already cooling, turn OFF
|
|
# - Otherwise turn ON and set COOL
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_page3_climate_cool_press
|
|
alias: "HASP: p3b6 up -> lounge climate cool toggle"
|
|
mode: queued
|
|
trigger:
|
|
- platform: mqtt
|
|
topic: "hasp/openhasp_1/state/p3b6"
|
|
condition:
|
|
- condition: template
|
|
value_template: "{{ trigger.payload_json.event | default('') == 'up' }}"
|
|
action:
|
|
- choose:
|
|
- conditions:
|
|
- condition: state
|
|
entity_id: climate.lounge
|
|
state: "cool"
|
|
sequence:
|
|
- service: climate.turn_off
|
|
target:
|
|
entity_id: climate.lounge
|
|
|
|
default:
|
|
- service: climate.turn_on
|
|
target:
|
|
entity_id: climate.lounge
|
|
- service: climate.set_hvac_mode
|
|
target:
|
|
entity_id: climate.lounge
|
|
data:
|
|
hvac_mode: cool
|
|
|
|
- delay: "00:00:01"
|
|
- service: script.hasp_push_page2_climate_texts
|
|
- service: script.hasp_apply_climate_heat_button_state
|
|
- service: script.hasp_push_page3_climate_texts
|
|
- service: script.hasp_apply_climate_cool_button_state
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Push all screen state when Home Assistant starts
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_start_on_ha_start
|
|
alias: "HASP: start display loop on HA start"
|
|
trigger:
|
|
- platform: homeassistant
|
|
event: start
|
|
action:
|
|
- service: script.hasp_push_static_texts
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Push all screen state when the openHASP panel comes online
|
|
# -------------------------------------------------------------------------
|
|
- id: hasp_start_on_panel_online
|
|
alias: "HASP: start display loop when panel goes online"
|
|
trigger:
|
|
- platform: mqtt
|
|
topic: "hasp/openhasp_1/LWT"
|
|
condition:
|
|
- condition: template
|
|
value_template: "{{ trigger.payload == 'online' }}"
|
|
action:
|
|
- delay: "00:00:05"
|
|
- service: script.hasp_push_static_texts
|
|
|
|
#:########################################################################################:#
|
|
# SCRIPTS
|
|
#:########################################################################################:#
|
|
|
|
script:
|
|
# -------------------------------------------------------------------------
|
|
# Push all current values and colours to the panel
|
|
# -------------------------------------------------------------------------
|
|
hasp_push_static_texts:
|
|
alias: "HASP: push static texts"
|
|
mode: queued
|
|
sequence:
|
|
- service: script.hasp_style_center_info_buttons
|
|
- service: script.hasp_style_page1_control_buttons
|
|
- service: script.hasp_style_page2_control_buttons
|
|
- service: script.hasp_style_page3_control_buttons
|
|
- service: script.hasp_publish_lounge_temp_displays
|
|
- service: script.hasp_publish_heater_status_text
|
|
- service: script.hasp_publish_heater_setpoint
|
|
- service: script.hasp_publish_humidity_displays
|
|
- service: script.hasp_apply_heat_button_state
|
|
- service: script.hasp_push_page2_climate_texts
|
|
- service: script.hasp_apply_climate_heat_button_state
|
|
- service: script.hasp_push_page3_climate_texts
|
|
- service: script.hasp_apply_climate_cool_button_state
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Publish actual lounge room temperature to all middle-left displays
|
|
# p1b2 = actual room temperature
|
|
# p2b2 = actual room temperature
|
|
# p3b2 = actual room temperature
|
|
# -------------------------------------------------------------------------
|
|
hasp_publish_lounge_temp_displays:
|
|
alias: "HASP: publish lounge actual temperature displays"
|
|
mode: queued
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b2.text"
|
|
payload: >-
|
|
{% set raw = states('sensor.lounge_environment_lounge_environment_temperature') %}
|
|
{% set cleaned = raw
|
|
| replace('°C', '')
|
|
| replace('° C', '')
|
|
| replace('℃', '')
|
|
| replace('C', '')
|
|
| trim %}
|
|
{% if cleaned not in ['unknown', 'unavailable', '', 'none', 'None'] %}
|
|
{{ '\uE50F' }} {{ cleaned | float(0) | round(1) }}°C
|
|
{% else %}
|
|
{{ '\uE50F' }} --°C
|
|
{% endif %}
|
|
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b2.text"
|
|
payload: >-
|
|
{% set raw = states('sensor.lounge_environment_lounge_environment_temperature') %}
|
|
{% set cleaned = raw
|
|
| replace('°C', '')
|
|
| replace('° C', '')
|
|
| replace('℃', '')
|
|
| replace('C', '')
|
|
| trim %}
|
|
{% if cleaned not in ['unknown', 'unavailable', '', 'none', 'None'] %}
|
|
{{ '\uE50F' }} {{ cleaned | float(0) | round(1) }}°C
|
|
{% else %}
|
|
{{ '\uE50F' }} --°C
|
|
{% endif %}
|
|
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b2.text"
|
|
payload: >-
|
|
{% set raw = states('sensor.lounge_environment_lounge_environment_temperature') %}
|
|
{% set cleaned = raw
|
|
| replace('°C', '')
|
|
| replace('° C', '')
|
|
| replace('℃', '')
|
|
| replace('C', '')
|
|
| trim %}
|
|
{% if cleaned not in ['unknown', 'unavailable', '', 'none', 'None'] %}
|
|
{{ '\uE50F' }} {{ cleaned | float(0) | round(1) }}°C
|
|
{% else %}
|
|
{{ '\uE50F' }} --°C
|
|
{% endif %}
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Publish gas heater setpoint to page 1 large top display
|
|
# p1b1 = gas heater setpoint
|
|
# -------------------------------------------------------------------------
|
|
hasp_publish_heater_setpoint:
|
|
alias: "HASP: publish gas heater setpoint"
|
|
mode: queued
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b1.text"
|
|
payload: >-
|
|
{% set raw = states('sensor.rinnai_neo_gas_heater_setpoint_text') %}
|
|
{% set cleaned = raw
|
|
| replace('°C', '')
|
|
| replace('° C', '')
|
|
| replace('℃', '')
|
|
| replace('C', '')
|
|
| trim %}
|
|
{% if cleaned not in ['unknown', 'unavailable', '', 'none', 'None'] %}
|
|
{{ '\uE238' }}{{ cleaned | float(0) | round(1) }}°C
|
|
{% else %}
|
|
{{ '\uE238' }}--°C
|
|
{% endif %}
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Publish humidity to page 1, page 2, and page 3
|
|
# -------------------------------------------------------------------------
|
|
hasp_publish_humidity_displays:
|
|
alias: "HASP: publish humidity displays"
|
|
mode: queued
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b7.text"
|
|
payload: >-
|
|
{% set raw = states('sensor.lounge_environment_humidity_mqtt') %}
|
|
{% set cleaned = raw | replace('%', '') | trim %}
|
|
{% if cleaned in ['unknown', 'unavailable', '', 'none', 'None'] %}
|
|
{{ '\uE58C' }} --%
|
|
{% else %}
|
|
{{ '\uE58C' }} {{ cleaned }}%
|
|
{% endif %}
|
|
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b7.text"
|
|
payload: >-
|
|
{% set raw = states('sensor.lounge_environment_humidity_mqtt') %}
|
|
{% set cleaned = raw | replace('%', '') | trim %}
|
|
{% if cleaned in ['unknown', 'unavailable', '', 'none', 'None'] %}
|
|
{{ '\uE58C' }} --%
|
|
{% else %}
|
|
{{ '\uE58C' }} {{ cleaned }}%
|
|
{% endif %}
|
|
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b7.text"
|
|
payload: >-
|
|
{% set raw = states('sensor.lounge_environment_humidity_mqtt') %}
|
|
{% set cleaned = raw | replace('%', '') | trim %}
|
|
{% if cleaned in ['unknown', 'unavailable', '', 'none', 'None'] %}
|
|
{{ '\uE58C' }} --%
|
|
{% else %}
|
|
{{ '\uE58C' }} {{ cleaned }}%
|
|
{% endif %}
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Publish gas heater status text to page 1 bottom label
|
|
#
|
|
# Display behaviour:
|
|
# - OFF -> Off
|
|
# - BYPASS (Remote Only) -> Bypass (Remote Only)
|
|
# - Auto but flame OFF -> Auto (Up to Temp)
|
|
# - Auto while firing -> Auto (Level 1), Auto (Level 2), etc.
|
|
# -------------------------------------------------------------------------
|
|
hasp_publish_heater_status_text:
|
|
alias: "HASP: publish heater status text"
|
|
mode: queued
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b5.text"
|
|
payload: >-
|
|
{% set mode = states('select.rinnai_neo_gas_heater_mode') %}
|
|
{% set op = states('switch.rinnai_neo_gas_heater_heater_operation') %}
|
|
{% set flame_on = is_state('switch.rinnai_neo_gas_heater_rinnai_neo_gas_heater_activate_flame', 'on') %}
|
|
{% set s = states('sensor.rinnai_neo_gas_heater_rinnai_neo_gas_heater_status_text') %}
|
|
|
|
{% if mode == 'OFF' %}
|
|
Off
|
|
{% elif mode == 'BYPASS (Remote Only)' %}
|
|
Bypass (Remote Only)
|
|
{% elif op == 'on' and not flame_on %}
|
|
Auto (Up to Temp)
|
|
{% elif s not in ['unknown', 'unavailable', '', 'none', 'None'] %}
|
|
{{ s }}
|
|
{% elif mode not in ['unknown', 'unavailable', '', 'none', 'None'] %}
|
|
{{ mode }}
|
|
{% else %}
|
|
HEATER --
|
|
{% endif %}
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Apply page 1 gas heater middle flame button state
|
|
# -------------------------------------------------------------------------
|
|
hasp_apply_heat_button_state:
|
|
alias: "HASP: apply gas heat button state"
|
|
mode: queued
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.text"
|
|
payload: "\uE238"
|
|
|
|
- choose:
|
|
# BYPASS -> grey button, amber flame
|
|
- conditions:
|
|
- condition: state
|
|
entity_id: select.rinnai_neo_gas_heater_mode
|
|
state: "BYPASS (Remote Only)"
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.text_color"
|
|
payload: "#FFB000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.bg_color"
|
|
payload: "#2F3240"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.bg_grad_color"
|
|
payload: "#2F3240"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.border_color"
|
|
payload: "#2F3240"
|
|
|
|
# OFF -> grey button, light grey flame
|
|
- conditions:
|
|
- condition: state
|
|
entity_id: select.rinnai_neo_gas_heater_mode
|
|
state: "OFF"
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.text_color"
|
|
payload: "#C0C0C0"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.bg_color"
|
|
payload: "#2F3240"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.bg_grad_color"
|
|
payload: "#2F3240"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.border_color"
|
|
payload: "#2F3240"
|
|
|
|
# AUTO, flame ON -> yellow button, red flame
|
|
- conditions:
|
|
- condition: state
|
|
entity_id: switch.rinnai_neo_gas_heater_heater_operation
|
|
state: "on"
|
|
- condition: state
|
|
entity_id: switch.rinnai_neo_gas_heater_rinnai_neo_gas_heater_activate_flame
|
|
state: "on"
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.text_color"
|
|
payload: "#FF3030"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.bg_color"
|
|
payload: "#FFC107"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.bg_grad_color"
|
|
payload: "#FFD54F"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.border_color"
|
|
payload: "#FFC107"
|
|
|
|
# AUTO, flame OFF -> yellow button, black flame
|
|
- conditions:
|
|
- condition: state
|
|
entity_id: switch.rinnai_neo_gas_heater_heater_operation
|
|
state: "on"
|
|
- condition: state
|
|
entity_id: switch.rinnai_neo_gas_heater_rinnai_neo_gas_heater_activate_flame
|
|
state: "off"
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.text_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.bg_color"
|
|
payload: "#FFC107"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.bg_grad_color"
|
|
payload: "#FFD54F"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.border_color"
|
|
payload: "#FFC107"
|
|
|
|
default:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.text_color"
|
|
payload: "#C0C0C0"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.bg_color"
|
|
payload: "#2F3240"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.bg_grad_color"
|
|
payload: "#2F3240"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b6.border_color"
|
|
payload: "#2F3240"
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Push page 2 climate.lounge setpoint and status text
|
|
# -------------------------------------------------------------------------
|
|
hasp_push_page2_climate_texts:
|
|
alias: "HASP: push page 2 climate texts"
|
|
mode: queued
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b1.text"
|
|
payload: >-
|
|
{% set target = state_attr('climate.lounge', 'temperature') %}
|
|
{% if target is not none %}
|
|
{{ '\uE5A8' }}{{ target | float(0) | round(1) }}°C
|
|
{% else %}
|
|
{{ '\uE5A8' }}--°C
|
|
{% endif %}
|
|
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b5.text"
|
|
payload: >-
|
|
{% set mode = states('climate.lounge') %}
|
|
{% set mode_map = {
|
|
'off': 'Off',
|
|
'heat': 'Heating',
|
|
'cool': 'Cooling',
|
|
'heat_cool': 'Auto',
|
|
'auto': 'Auto',
|
|
'dry': 'Dry',
|
|
'fan_only': 'Fan'
|
|
} %}
|
|
{% set mode_text = mode_map.get(mode, mode | replace('_', ' ') | title) %}
|
|
|
|
{% set preset = state_attr('climate.lounge', 'preset_mode') | default('', true) | string | lower %}
|
|
{% set fan = state_attr('climate.lounge', 'fan_mode') | default('', true) | string | lower %}
|
|
{% set swing = state_attr('climate.lounge', 'swing_mode') | default('', true) | string | lower %}
|
|
|
|
{% set eco_attr = state_attr('climate.lounge', 'eco') | default('', true) | string | lower %}
|
|
{% set powerful_attr = state_attr('climate.lounge', 'powerful') | default('', true) | string | lower %}
|
|
{% set quiet_attr = state_attr('climate.lounge', 'quiet') | default('', true) | string | lower %}
|
|
{% set nanoe_attr = state_attr('climate.lounge', 'nanoe') | default('', true) | string | lower %}
|
|
{% set nanoe_x_attr = state_attr('climate.lounge', 'nanoe_x') | default('', true) | string | lower %}
|
|
|
|
{% set ns = namespace(extras=[]) %}
|
|
|
|
{% if 'eco' in preset or eco_attr in ['on', 'true', '1', 'yes'] %}
|
|
{% set ns.extras = ns.extras + ['Eco'] %}
|
|
{% endif %}
|
|
|
|
{% if 'powerful' in preset or 'boost' in preset or powerful_attr in ['on', 'true', '1', 'yes'] %}
|
|
{% set ns.extras = ns.extras + ['Powerful'] %}
|
|
{% endif %}
|
|
|
|
{% if 'quiet' in preset or 'quiet' in fan or quiet_attr in ['on', 'true', '1', 'yes'] %}
|
|
{% set ns.extras = ns.extras + ['Quiet'] %}
|
|
{% endif %}
|
|
|
|
{% if 'nanoe' in preset or 'nanoe' in swing or nanoe_attr in ['on', 'true', '1', 'yes'] or nanoe_x_attr in ['on', 'true', '1', 'yes'] %}
|
|
{% set ns.extras = ns.extras + ['nanoe-x'] %}
|
|
{% endif %}
|
|
|
|
{% if ns.extras | length > 0 %}
|
|
{{ mode_text }} ({{ ns.extras | join(', ') }})
|
|
{% else %}
|
|
{{ mode_text }}
|
|
{% endif %}
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Push page 3 climate.lounge setpoint and status text
|
|
# -------------------------------------------------------------------------
|
|
hasp_push_page3_climate_texts:
|
|
alias: "HASP: push page 3 climate texts"
|
|
mode: queued
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b1.text"
|
|
payload: >-
|
|
{% set target = state_attr('climate.lounge', 'temperature') %}
|
|
{% if target is not none %}
|
|
{{ '\uE717' }}{{ target | float(0) | round(1) }}°C
|
|
{% else %}
|
|
{{ '\uE717' }}--°C
|
|
{% endif %}
|
|
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b5.text"
|
|
payload: >-
|
|
{% set mode = states('climate.lounge') %}
|
|
{% set mode_map = {
|
|
'off': 'Off',
|
|
'heat': 'Heating',
|
|
'cool': 'Cooling',
|
|
'heat_cool': 'Auto',
|
|
'auto': 'Auto',
|
|
'dry': 'Dry',
|
|
'fan_only': 'Fan'
|
|
} %}
|
|
{% set mode_text = mode_map.get(mode, mode | replace('_', ' ') | title) %}
|
|
|
|
{% set preset = state_attr('climate.lounge', 'preset_mode') | default('', true) | string | lower %}
|
|
{% set fan = state_attr('climate.lounge', 'fan_mode') | default('', true) | string | lower %}
|
|
{% set swing = state_attr('climate.lounge', 'swing_mode') | default('', true) | string | lower %}
|
|
|
|
{% set eco_attr = state_attr('climate.lounge', 'eco') | default('', true) | string | lower %}
|
|
{% set powerful_attr = state_attr('climate.lounge', 'powerful') | default('', true) | string | lower %}
|
|
{% set quiet_attr = state_attr('climate.lounge', 'quiet') | default('', true) | string | lower %}
|
|
{% set nanoe_attr = state_attr('climate.lounge', 'nanoe') | default('', true) | string | lower %}
|
|
{% set nanoe_x_attr = state_attr('climate.lounge', 'nanoe_x') | default('', true) | string | lower %}
|
|
|
|
{% set ns = namespace(extras=[]) %}
|
|
|
|
{% if 'eco' in preset or eco_attr in ['on', 'true', '1', 'yes'] %}
|
|
{% set ns.extras = ns.extras + ['Eco'] %}
|
|
{% endif %}
|
|
|
|
{% if 'powerful' in preset or 'boost' in preset or powerful_attr in ['on', 'true', '1', 'yes'] %}
|
|
{% set ns.extras = ns.extras + ['Powerful'] %}
|
|
{% endif %}
|
|
|
|
{% if 'quiet' in preset or 'quiet' in fan or quiet_attr in ['on', 'true', '1', 'yes'] %}
|
|
{% set ns.extras = ns.extras + ['Quiet'] %}
|
|
{% endif %}
|
|
|
|
{% if 'nanoe' in preset or 'nanoe' in swing or nanoe_attr in ['on', 'true', '1', 'yes'] or nanoe_x_attr in ['on', 'true', '1', 'yes'] %}
|
|
{% set ns.extras = ns.extras + ['nanoe-x'] %}
|
|
{% endif %}
|
|
|
|
{% if ns.extras | length > 0 %}
|
|
{{ mode_text }} ({{ ns.extras | join(', ') }})
|
|
{% else %}
|
|
{{ mode_text }}
|
|
{% endif %}
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Apply page 2 climate.lounge heat button state
|
|
# -------------------------------------------------------------------------
|
|
hasp_apply_climate_heat_button_state:
|
|
alias: "HASP: apply lounge climate heat button state"
|
|
mode: queued
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b6.text"
|
|
payload: "\uE5A8"
|
|
|
|
- choose:
|
|
# climate.lounge is ON and in HEAT mode -> pink sun
|
|
- conditions:
|
|
- condition: state
|
|
entity_id: climate.lounge
|
|
state: "heat"
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b6.text_color"
|
|
payload: "#FFFFFF"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b6.bg_color"
|
|
payload: "#C2185B"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b6.bg_grad_color"
|
|
payload: "#E91E63"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b6.border_color"
|
|
payload: "#C2185B"
|
|
|
|
default:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b6.text_color"
|
|
payload: "#C0C0C0"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b6.bg_color"
|
|
payload: "#2F3240"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b6.bg_grad_color"
|
|
payload: "#2F3240"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b6.border_color"
|
|
payload: "#2F3240"
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Apply page 3 climate.lounge cool button state
|
|
# -------------------------------------------------------------------------
|
|
hasp_apply_climate_cool_button_state:
|
|
alias: "HASP: apply lounge climate cool button state"
|
|
mode: queued
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b6.text"
|
|
payload: "\uE717"
|
|
|
|
- choose:
|
|
# climate.lounge is ON and in COOL mode -> light blue snowflake
|
|
- conditions:
|
|
- condition: state
|
|
entity_id: climate.lounge
|
|
state: "cool"
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b6.text_color"
|
|
payload: "#FFFFFF"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b6.bg_color"
|
|
payload: "#0288D1"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b6.bg_grad_color"
|
|
payload: "#4FC3F7"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b6.border_color"
|
|
payload: "#0288D1"
|
|
|
|
default:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b6.text_color"
|
|
payload: "#C0C0C0"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b6.bg_color"
|
|
payload: "#2F3240"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b6.bg_grad_color"
|
|
payload: "#2F3240"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b6.border_color"
|
|
payload: "#2F3240"
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Style page 1, page 2, and page 3 actual temp/humidity displays
|
|
# -------------------------------------------------------------------------
|
|
hasp_style_center_info_buttons:
|
|
alias: "HASP: style centre info buttons"
|
|
mode: queued
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b2.text_color"
|
|
payload: "#FFFFFF"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b2.bg_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b2.bg_grad_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b2.border_color"
|
|
payload: "#000000"
|
|
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b7.text_color"
|
|
payload: "#FFFFFF"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b7.bg_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b7.bg_grad_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b7.border_color"
|
|
payload: "#000000"
|
|
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b2.text_color"
|
|
payload: "#FFFFFF"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b2.bg_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b2.bg_grad_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b2.border_color"
|
|
payload: "#000000"
|
|
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b7.text_color"
|
|
payload: "#FFFFFF"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b7.bg_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b7.bg_grad_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b7.border_color"
|
|
payload: "#000000"
|
|
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b2.text_color"
|
|
payload: "#FFFFFF"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b2.bg_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b2.bg_grad_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b2.border_color"
|
|
payload: "#000000"
|
|
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b7.text_color"
|
|
payload: "#FFFFFF"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b7.bg_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b7.bg_grad_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b7.border_color"
|
|
payload: "#000000"
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Style page 1 gas heater up/down buttons yellow
|
|
# p1b6 is state-driven by hasp_apply_heat_button_state.
|
|
# -------------------------------------------------------------------------
|
|
hasp_style_page1_control_buttons:
|
|
alias: "HASP: style page 1 control buttons"
|
|
mode: queued
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b3.text_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b3.bg_color"
|
|
payload: "#FFC107"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b3.bg_grad_color"
|
|
payload: "#FFD54F"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b3.border_color"
|
|
payload: "#FFC107"
|
|
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b4.text_color"
|
|
payload: "#000000"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b4.bg_color"
|
|
payload: "#FFC107"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b4.bg_grad_color"
|
|
payload: "#FFD54F"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p1b4.border_color"
|
|
payload: "#FFC107"
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Style page 2 climate up/down buttons pink
|
|
# p2b6 is state-driven by hasp_apply_climate_heat_button_state.
|
|
# -------------------------------------------------------------------------
|
|
hasp_style_page2_control_buttons:
|
|
alias: "HASP: style page 2 control buttons"
|
|
mode: queued
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b3.text_color"
|
|
payload: "#FFFFFF"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b3.bg_color"
|
|
payload: "#C2185B"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b3.bg_grad_color"
|
|
payload: "#E91E63"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b3.border_color"
|
|
payload: "#C2185B"
|
|
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b4.text_color"
|
|
payload: "#FFFFFF"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b4.bg_color"
|
|
payload: "#C2185B"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b4.bg_grad_color"
|
|
payload: "#E91E63"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p2b4.border_color"
|
|
payload: "#C2185B"
|
|
|
|
# -------------------------------------------------------------------------
|
|
# Style page 3 climate up/down buttons light blue
|
|
# p3b6 is state-driven by hasp_apply_climate_cool_button_state.
|
|
# -------------------------------------------------------------------------
|
|
hasp_style_page3_control_buttons:
|
|
alias: "HASP: style page 3 control buttons"
|
|
mode: queued
|
|
sequence:
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b3.text_color"
|
|
payload: "#FFFFFF"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b3.bg_color"
|
|
payload: "#0288D1"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b3.bg_grad_color"
|
|
payload: "#4FC3F7"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b3.border_color"
|
|
payload: "#0288D1"
|
|
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b4.text_color"
|
|
payload: "#FFFFFF"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b4.bg_color"
|
|
payload: "#0288D1"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b4.bg_grad_color"
|
|
payload: "#4FC3F7"
|
|
- service: mqtt.publish
|
|
data:
|
|
topic: "hasp/openhasp_1/command/p3b4.border_color"
|
|
payload: "#0288D1"
|