zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
19ba5a0c8c433ced6134e73df0b56641f04cd9be
zorruno-homeassistant/esphome/esp-laundrydrypow.yaml
T
ESPHome Device Builder 706844e6e8 Edit esp-laundrydrypow.yaml
2026-07-12 12:12:18 +12:00

383 lines
13 KiB
YAML
Raw Blame History

#:########################################################################################:#
# TITLE: LAUNDRY DRYER MACHINE POWER
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-laundrydrypow.yaml
#:########################################################################################:#
# VERSIONS:
# V1.2 2026-07-12 Added cumulative Load Energy integration sensor
# Added seven-day maximum power sensor
# Maximum power resets after 168 powered hours
# V1.1 2026-03-11 Updated yaml to zorruno layout V1.1
# V1.0 2025-05-28 Initial Version
#:########################################################################################:#
# HARDWARE:
# - Sonoff POW R1
# - ESP8266 based
# - HLW8012 power monitoring
# - Single relay output
# - Blue status LED on GPIO15
# - Local push button on GPIO0
# - Relay output on GPIO12
# - Reference: https://devices.esphome.io/devices/Sonoff-POW-R1
#:########################################################################################:#
# OPERATION NOTES:
# - Monitors dryer load current, voltage, power, and cumulative energy
# - Load Energy integrates measured power over time and reports kWh
# - Load Energy resets to zero if the ESPHome device reboots
# - Home Assistant handles the reset because the sensor uses total_increasing
# - Load Maximum Power 7 Days records the highest measured power
# - Maximum power resets after 168 powered hours
# - The maximum power value and elapsed-hour counter are retained across reboots
# - The elapsed-hour counter is saved every six hours to reduce flash writes
# - An unexpected power loss may extend the reset period by up to approximately six hours
# - No accurate clock or SNTP connection is required for the seven-day reset
# - Provides a virtual relay switch that controls the physical relay and LED together
# - Local button toggles the virtual relay switch
# - On boot, the virtual relay is turned ON
# - "Load Running" turns ON when measured power is above 4 W
# - "Load Running" uses delayed_off: 15s to avoid rapid state changes
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant offline (network and MQTT online):
# - Device continues running normally
# - Local button still works
# - Power, energy, running state, and maximum power continue operating locally
# - MQTT remains available if the common MQTT package is enabled and broker is reachable
#
# b) MQTT offline (or HA/MQTT offline):
# - Device continues running locally
# - Local button, relay control, LED control, and power monitoring still work
# - Energy integration and maximum power monitoring continue locally
#
# c) Entire WiFi/Network offline:
# - Device continues running locally
# - Local button, relay control, LED control, and power monitoring still work
# - Energy integration and maximum power monitoring continue locally
# - Accurate time is not needed; SNTP is not required for operation
#:########################################################################################:#
#:########################################################################################:#
# SUBSTITUTIONS:
# Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
# Device Naming
device_name: "esp-laundrydrypow"
friendly_name: "Laundry Dryer Power"
description_comment: "Laundry Dryer Power using a Sonoff Pow R1. (Layout V1.1)"
device_area: "Laundry"
# Project Naming
project_name: "Sonoff Technologies.POW R1"
project_version: "v1.2"
# Entity Naming
entity_prefix: "Load"
# Passwords and Secrets
api_key: !secret esp-laundrydrypow_api_key
ota_pass: !secret esp-laundrydrypow_ota_pass
static_ip_address: !secret esp-laundrydrypow_ip
current_ip_address: ${static_ip_address}
# Device Settings
log_level: "INFO"
update_interval: "60s"
#:########################################################################################:#
# PACKAGES:
# Included common packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_current_ip_address: "${current_ip_address}"
local_ota_pass: "${ota_pass}"
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
common_api: !include
file: common/api_common.yaml
# file: common/api_common_noencryption.yaml
vars:
local_api_key: "${api_key}"
#### MQTT ####
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
#### WEB PORTAL ####
# common_webportal: !include common/webportal_common.yaml
#### SNTP (Only use if you want/need accurate timeclocks) ####
# common_sntp: !include common/sntp_common.yaml
#### DIAGNOSTICS Sensors ####
diag_basic: !include common/include_basic_diag_sensors.yaml
diag_more: !include common/include_more_diag_sensors.yaml
# diag_debug: !include common/include_debug_diag_sensors.yaml
# diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
#:########################################################################################:#
# ESPHOME:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}"
area: "${device_area}"
# Limit parallel compiler processes to reduce host RAM usage.
compile_process_limit: 1
project:
name: "${project_name}"
version: "${project_version}"
on_boot:
priority: 200
then:
- switch.turn_on: virtual_button
#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK:
# https://esphome.io/components/esp8266.html
#:########################################################################################:#
esp8266:
board: esp01_1m
early_pin_init: false
board_flash_mode: dout
#:########################################################################################:#
# LOGGER:
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
level: "${log_level}"
# baud_rate: 0
# esp8266_store_log_strings_in_flash: false
# tx_buffer_size: 64
#:########################################################################################:#
# STATUS LED:
# https://esphome.io/components/status_led.html
#:########################################################################################:#
# status_led:
# pin:
# number: GPIO2
# inverted: true
#:########################################################################################:#
# GLOBALS:
# Retained maximum power and elapsed-hour counter
# https://esphome.io/components/globals.html
#:########################################################################################:#
globals:
# Highest measured power during the current seven-day period.
# The value is checked for changes every five minutes before being saved.
- id: max_power_7d
type: float
restore_value: true
initial_value: '0.0'
update_interval: 5min
# Number of powered hours elapsed in the current seven-day period.
# Saved every six hours to reduce ESP8266 flash writes.
- id: max_power_hours_elapsed
type: uint16_t
restore_value: true
initial_value: '0'
update_interval: 6h
#:########################################################################################:#
# BINARY SENSORS:
# https://esphome.io/components/binary_sensor/
#:########################################################################################:#
binary_sensor:
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
inverted: true
name: "Button"
on_press:
- switch.toggle: virtual_button
- platform: template
name: "${entity_prefix} Running"
filters:
- delayed_off: 15s
lambda: |-
if (isnan(id(power).state)) {
return {};
} else if (id(power).state > 4.0f) {
return true;
} else {
return false;
}
#:########################################################################################:#
# SENSORS:
# https://esphome.io/components/sensor/
#:########################################################################################:#
sensor:
- platform: hlw8012
sel_pin: GPIO5
cf_pin: GPIO14
cf1_pin: GPIO13
update_interval: 2s
current:
name: "${entity_prefix} Current"
device_class: current
state_class: measurement
unit_of_measurement: "A"
accuracy_decimals: 2
voltage:
name: "${entity_prefix} Voltage"
device_class: voltage
state_class: measurement
unit_of_measurement: "V"
accuracy_decimals: 1
power:
name: "${entity_prefix} Power"
id: power
device_class: power
state_class: measurement
unit_of_measurement: "W"
accuracy_decimals: 1
# Update the seven-day maximum whenever a new peak is measured.
on_value:
then:
- lambda: |-
if (!isnan(x) && x > id(max_power_7d)) {
id(max_power_7d) = x;
id(max_power_7d_sensor).publish_state(x);
ESP_LOGI(
"max_power",
"New seven-day maximum power: %.1f W",
x
);
}
# on_value_range:
# - above: 4.0
# then:
# - light.turn_on: led
# - below: 3.0
# then:
# - light.turn_off: led
# Integrates instantaneous watts over time.
# Watts integrated over hours produces Wh, then multiply converts Wh to kWh.
- platform: integration
name: "${entity_prefix} Energy"
id: energy
sensor: power
time_unit: h
integration_method: trapezoid
restore: false
unit_of_measurement: "kWh"
device_class: energy
state_class: total_increasing
accuracy_decimals: 3
filters:
- multiply: 0.001
# Highest power reading recorded during the current 168 powered-hour period.
- platform: template
name: "${entity_prefix} Maximum Power 7 Days"
id: max_power_7d_sensor
unit_of_measurement: "W"
device_class: power
state_class: measurement
accuracy_decimals: 1
update_interval: 60s
lambda: |-
return id(max_power_7d);
#:########################################################################################:#
# INTERVAL:
# Seven-day maximum power reset
# https://esphome.io/components/interval.html
#:########################################################################################:#
interval:
# Count one powered hour at a time.
# 168 hours equals seven days.
- interval: 1h
then:
- lambda: |-
id(max_power_hours_elapsed) += 1;
ESP_LOGD(
"max_power",
"Seven-day maximum power period: %u of 168 powered hours elapsed",
id(max_power_hours_elapsed)
);
if (id(max_power_hours_elapsed) >= 168) {
id(max_power_hours_elapsed) = 0;
id(max_power_7d) = 0.0f;
id(max_power_7d_sensor).publish_state(0.0f);
ESP_LOGI(
"max_power",
"Seven-day maximum power value has been reset"
);
}
#:########################################################################################:#
# SWITCH:
# https://esphome.io/components/switch/
#:########################################################################################:#
switch:
- platform: template
name: "Relay"
id: virtual_button
optimistic: true
turn_on_action:
- switch.turn_on: relay
- light.turn_on: led
turn_off_action:
- switch.turn_off: relay
- light.turn_off: led
- platform: gpio
id: relay
pin: GPIO12
# restore_mode: ALWAYS_ON
#:########################################################################################:#
# OUTPUT:
# https://esphome.io/components/output/
#:########################################################################################:#
output:
- platform: esp8266_pwm
id: pow_blue_led
pin:
number: GPIO15
inverted: true
#:########################################################################################:#
# LIGHT:
# https://esphome.io/components/light/
#:########################################################################################:#
light:
- platform: monochromatic
name: "Status LED"
output: pow_blue_led
id: led
Reference in New Issue View Git Blame Copy Permalink