zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
23abe209a5db7992438a2253fddf2c9a1c768a9f
zorruno-homeassistant/esphome/esp-officeduallights.yaml

299 lines
10 KiB
YAML
Raw Blame History

#############################################
#############################################
# OFFICE DUAL LIGHT CONTROL
# - Overhead cool white lights
# - Right hand warm bunker light
#
# Controlled by a Sonoff Dual R1
# A sonoff dual uses serial data to turn the relays on/off
#
# V2.3 - 2025-06-18 Added MQTT direct relay control
#
# NOTES:
# Command the lights on with MQTT
# ${mqtt_command_topic}/relay2/set ON or OFF
# ${mqtt_command_topic}/relay2/set ON or OFF
#
##########################################################################################
##########################################################################################
##########################################################################################
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
##########################################################################################
substitutions:
# Device Naming
device_name: "esp-officeduallights"
friendly_name: "Office Dual Lights"
description_comment: "Dual Office Lights (Overhead and right hand Bunker) :: Sonoff Dual R1"
device_area: "Office" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
mqtt_device_name: "office-dual-lights"
# Project Naming
project_name: "Sonoff Technologies.Sonoff Dual R1" # Project Details
project_version: "v2.3" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
# Passwords
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
static_ip_address: !secret esp-officeduallights_ip
mqtt_main_command_topic: !secret mqtt_main_command_topic
# Device Settings
relay_icon: "mdi:lightbulb-group"
log_level: "NONE" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for for general sensors etc
# MQTT Controls
mqtt_topic: "${mqtt_main_command_topic}/${mqtt_device_name}" # Topic we will use to command stuff from external withougt HA
#mqtt_status_topic: "${mqtt_main_status_topic}/esphome/${device_name}" # Topic we will use to read stuff from external withougt HA
#mqtt_main_status_topic: !secret mqtt_main_status_topic
#mqtt_remote_device1_command_topic: "${mqtt_main_command_topic}/masterbath-towelrail/operation"
#mqtt_remote_device1_command1: "BOOST"
##########################################################################################
# PACKAGES: Included Common Packages
# https://esphome.io/components/esphome.html
##########################################################################################
packages:
common_wifi: !include
file: common/network_common.yaml
vars:
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
common_api: !include
file: common/api_common.yaml
vars:
local_api_key: "${api_key}"
# common_webportal: !include
# file: common/webportal_common.yaml
common_mqtt: !include
file: common/mqtt_common.yaml
common_sntp: !include
file: common/sntp_common.yaml
common_general_sensors: !include
file: common/sensors_common.yaml
vars:
local_friendly_name: "${friendly_name}"
local_update_interval: "${update_interval}"
##########################################################################################
# ESPHome
# https://esphome.io/components/esphome.html
##########################################################################################
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}" # Appears on the esphome page in HA
area: "${device_area}"
platformio_options:
build_flags:
- "-Os" # optimize for size
- "-Wl,--gc-sections" # drop unused code/data
- "-fno-exceptions" # strip C++ exceptaions
- "-fno-rtti" # strip C++ RTTI
##########################################################################################
# ESP Platform and Framework
# https://esphome.io/components/esp32.html
##########################################################################################
esp8266:
board: esp01_1m # The original sonoff basic
restore_from_flash: False # restore some values on reboot
preferences:
flash_write_interval: 5min
mdns:
disabled: True
##########################################################################################
# ESPHome Logging Enable
# https://esphome.io/components/logger.html
##########################################################################################
# NOTE: Sonoff Dual CANNOT send serial data to log
###############################################
logger:
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM, Serial control)
#esp8266_store_log_strings_in_flash: false
#tx_buffer_size: 64
##########################################################################################
# UART Bus
# https://esphome.io/components/uart.html
##########################################################################################
uart:
tx_pin: GPIO01
rx_pin: GPIO03
baud_rate: 19200
#data_bits: 8
#stop_bits: 1
#parity: EVEN
##########################################################################################
# MQTT COMMANDS
# This adds device-specific MQTT command triggers to the common MQTT configuration.
##########################################################################################
mqtt:
# Direct MQTT control for relays via serial commands
on_message:
# Relay 1 control
- topic: "${mqtt_topic}/relay1/set"
payload: "ON"
then:
- switch.turn_on: relay_1
- light.turn_on: light_1
- topic: "${mqtt_topic}/relay1/set"
payload: "OFF"
then:
- switch.turn_off: relay_1
- light.turn_off: light_1
# Relay 2 control
- topic: "${mqtt_topic}/relay2/set"
payload: "ON"
then:
- switch.turn_on: relay_2
- light.turn_on: light_2
- topic: "${mqtt_topic}/relay2/set"
payload: "OFF"
then:
- switch.turn_off: relay_2
- light.turn_off: light_2
##########################################################################################
# STATUS LED
# https://esphome.io/components/status_led.html
##########################################################################################
# Sonoff Dual LED is GPIO13
#############################################
status_led:
pin:
number: GPIO13
inverted: yes
##########################################################################################
# BINARY SENSORS
# https://esphome.io/components/binary_sensor/
##########################################################################################
# Sonoff Dual R1 buttons are GPIO04, GPIO14
#############################################
binary_sensor:
- platform: gpio
pin:
number: GPIO4
mode: INPUT_PULLUP
inverted: true
id: button_1
on_press:
- switch.toggle: relay_1
- platform: gpio
pin:
number: GPIO14
mode: INPUT_PULLUP
inverted: true
id: button_2
on_press:
- switch.toggle: relay_2
##########################################################################################
# SWITCH COMPONENT
# https://esphome.io/components/switch/
##########################################################################################
# Sonoff Dual R1 requires serial data to switch
#############################################
switch:
- platform: template
name: "Dual L1 Relay"
id: relay_1
optimistic: true
icon: "${relay_icon}"
internal: true
turn_on_action:
- mqtt.publish:
topic: "${mqtt_topic}/relay1/state"
payload: "ON"
- if:
condition:
switch.is_off: relay_2
then:
- uart.write: [0xA0, 0x04, 0x01, 0xA1]
else:
- uart.write: [0xA0, 0x04, 0x03, 0xA1]
turn_off_action:
- mqtt.publish:
topic: "${mqtt_topic}/relay1/state"
payload: "OFF"
- if:
condition:
switch.is_off: relay_2
then:
- uart.write: [0xA0, 0x04, 0x00, 0xA1]
else:
- uart.write: [0xA0, 0x04, 0x02, 0xA1]
- platform: template
name: "Dual L2 Relay"
id: relay_2
optimistic: true
icon: "${relay_icon}"
internal: true
turn_on_action:
- mqtt.publish:
topic: "${mqtt_topic}/relay2/state"
payload: "ON"
- if:
condition:
switch.is_off: relay_1
then:
- uart.write: [0xA0, 0x04, 0x02, 0xA1]
else:
- uart.write: [0xA0, 0x04, 0x03, 0xA1]
turn_off_action:
- mqtt.publish:
topic: "${mqtt_topic}/relay2/state"
payload: "OFF"
- if:
condition:
switch.is_off: relay_1
then:
- uart.write: [0xA0, 0x04, 0x00, 0xA1]
else:
- uart.write: [0xA0, 0x04, 0x01, 0xA1]
################################################################################
# TEMPLATE OUTPUTS: drive the real relays when the light state changes
################################################################################
output:
- platform: template
id: light_output_1
type: binary
write_action:
- lambda: |-
if (state) id(relay_1).turn_on();
else id(relay_1).turn_off();
- platform: template
id: light_output_2
type: binary
write_action:
- lambda: |-
if (state) id(relay_2).turn_on();
else id(relay_2).turn_off();
##########################################################################################
# LIGHT COMPONENT
# https://esphome.io/components/light/
##########################################################################################
light:
- platform: binary
name: "Light 1 (Right Hand Bunker Light)"
id: light_1
output: light_output_1
- platform: binary
name: "Light 2 (Cool White Overhead Lights)"
id: light_2
output: light_output_2
Reference in New Issue View Git Blame Copy Permalink