zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
4bc8c308a623840599fd745a2738a03b9c281e30
zorruno-homeassistant/esphome/esp-mainbathroomlights.yaml
T
root f7bfa78835 more esphome devices and fixes
2026-04-03 21:34:23 +13:00

326 lines
13 KiB
YAML
Raw Blame History

#:########################################################################################:#
# TITLE: MAIN BATHROOM LIGHTSWITCH 2 (OBK Converted, BK7231N)
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-mainbathroomlights.yaml
#:########################################################################################:#
# VERSIONS:
# V2.2 2026-03-11 Updated yaml to zorruno layout V1.1
# V2.1 2026-02-23 Button 3 multi-click publishes MQTT commands to bathroom fan (1x/2x/3x)
# V2.0 2026-02-04 Reflash into new switch (old switch electrical failure, now a BK)
# V1.0 2025-11-23 Initial
#:########################################################################################:#
# HARDWARE:
# - Zemismart KS-811 Triple push button
# - BK7231N based switch
# - BK72XX board: generic-bk7231n-qfn32-tuya
# - pinout/schematic:
# https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
#:########################################################################################:#
# OPERATION NOTES:
# - Main bathroom switch with 3 outputs:
# 1) Main Lights
# 2) Shower Lights
# 3) Cabinet Lights
# - Button 1 toggles Relay_2 (as currently coded in the source yaml)
# - Button 2 toggles Relay_2
# - Button 3 immediate press action turns OFF Relay_2 and Relay_3
# - Button 3 also sends MQTT commands to the bathroom fan based on click count:
# - 1 click -> command 1
# - 2 clicks -> command 2
# - 3 clicks -> command 3
# - Relay 1 turn_on action also turns ON Relay_2 and Relay_3
# - Virtual group switch "All Main Bathroom Lights" allows grouped control in Home Assistant
#:########################################################################################:#
# MQTT COMMANDS:
# - Remote device command topic:
# - ${mqtt_remote_device1_command_topic}
# - Button 3 single click publishes:
# - ${mqtt_remote_device1_command1}
# - Button 3 double click publishes:
# - ${mqtt_remote_device1_command2}
# - Button 3 triple click publishes:
# - ${mqtt_remote_device1_command3}
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant offline (network and MQTT online):
# - Local button control continues to operate the relays.
# - Button 3 MQTT fan commands can still publish if MQTT broker is online.
# - Virtual group switch in HA will be unavailable until HA returns.
# b) MQTT offline (or HA/MQTT offline):
# - Local button control continues to operate the relays.
# - Button 3 fan MQTT commands will not be sent.
# c) Entire WiFi/Network offline:
# - Local button control continues to operate the relays.
# - No MQTT control or status is available.
# - Accurate time is not needed; SNTP is not required for operation.
#:########################################################################################:#
#:########################################################################################:#
# SUBSTITUTIONS: Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
# Device Naming
device_name: "esp-mainbathroomlights"
friendly_name: "Main Bathroom Lightswitch (3)"
description_comment: "BK7231N - Main Bathroom Lightswitch using a Zemismart KS-811 Triple Push Button. Main Lights (1), Shower Lights (2), Cabinet Lights (3) (Layout V1.1)"
device_area: "Main Bathroom" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "Zemismart Technologies.KS-811 Triple BK7231N" # Project Details
project_version: "v2.2" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
# Passwords
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
static_ip_address: !secret esp-mainbathroomlights_ip
mqtt_command_main_topic: !secret mqtt_command_main_topic
#mqtt_status_main_topic: !secret mqtt_status_main_topic
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
# Don't forget to switch it back when changed.
current_ip_address: ${static_ip_address}
# Device Settings
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for for general sensors etc
# Default relay restore mode
# Options: RESTORE_DEFAULT_OFF, RESTORE_DEFAULT_ON, ALWAYS_ON, ALWAYS_OFF
relay_restore_mode: "RESTORE_DEFAULT_OFF"
# Switch Naming
switch_1_name: "Main Lights" # Only one light (Garage Side) actually connected to this relay
switch_2_name: "Shower Lights" # Output for pario string hanging lights
switch_3_name: "Cabinet Lights" # This is virtual only, no power connected to 3rd relay
# MQTT LOCAL Controls
#mqtt_local_device_name: "masterbath-lights"
#mqtt_local_command_topic: "${mqtt_command_main_topic}/${mqtt_local_device_name}" # Topic we will use to command this locally without HA
#mqtt_local_status_topic: "${mqtt_status_main_topic}/${mqtt_local_device_name}" # Topic we will use to view status locally without HA
# MQTT REMOTE Controls
mqtt_remote_device1_name: "masterbath-fan"
mqtt_remote_device1_command_topic: "${mqtt_command_main_topic}/${mqtt_remote_device1_name}"
mqtt_remote_device1_command1: "10"
mqtt_remote_device1_command2: "20"
mqtt_remote_device1_command3: "30"
#:########################################################################################:#
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
local_current_ip_address: "${current_ip_address}"
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
common_api: !include
file: common/api_common.yaml
#file: common/api_common_noencryption.yaml
vars:
local_api_key: "${api_key}"
#### MQTT ####
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
#### WEB PORTAL ####
#common_webportal: !include common/webportal_common.yaml
#### SNTP (Only use if you want/need accurate timeclocks) ####
#common_sntp: !include common/sntp_common.yaml
#### DIAGNOSTICS Sensors ####
diag_basic: !include common/include_basic_diag_sensors.yaml
#diag_more: !include common/include_more_diag_sensors.yaml
#diag_debug: !include common/include_debug_diag_sensors.yaml
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
#:########################################################################################:#
# PACKAGE ITEM REMOVALS / OVERRIDES:
#:########################################################################################:#
wifi:
min_auth_mode: !remove # The WPA2 only works on esp32/8266
reboot_timeout: 15min # override the selection from the common package
fast_connect: false # optional; force off in case package vars change
mqtt:
keepalive: 15s # overriding the value from the common package
#:########################################################################################:#
# ESPHOME:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}" # Appears on the esphome page in HA
area: "${device_area}"
project:
name: "${project_name}"
version: "${project_version}"
# on_boot:
# priority: 200
# then:
# - switch.turn_on: Relay_3
#:########################################################################################:#
# BUILD FOR BK CHIPSET:
# bk72xx
# https://devices.esphome.io/board/bk72xx/
#:########################################################################################:#
bk72xx:
board: generic-bk7231n-qfn32-tuya
#:########################################################################################:#
# LOGGER:
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
level: "${log_level}" # INFO Level suggested, or DEBUG for testing
baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
id: logger_id
#:########################################################################################:#
# STATUS LED:
# https://esphome.io/components/status_led.html
#:########################################################################################:#
status_led:
pin:
number: P22 #GPIO22
inverted: true
#:########################################################################################:#
# BINARY SENSORS:
# https://esphome.io/components/binary_sensor/
#:########################################################################################:#
binary_sensor:
- platform: gpio
pin:
number: P17
mode:
input: true
pullup: true
inverted: true
name: "Button 1: ${switch_1_name}"
on_press:
- delay: 50ms
- switch.toggle: Relay_2 #(FIX shoud be relay 1)
- platform: gpio
pin:
number: P26
mode:
input: true
pullup: true
inverted: true
name: "Button 2: ${switch_2_name}"
on_press:
- delay: 50ms
- switch.toggle: Relay_2
- platform: gpio
pin:
number: P24
mode:
input: true
pullup: true
inverted: true
name: "Button 3: ${switch_3_name}"
# Keep existing actions for ANY press (immediate OFF behavior)
on_press:
- delay: 50ms
#- switch.turn_off: Relay_1
- switch.turn_off: Relay_2
- switch.turn_off: Relay_3
# Also publish MQTT commands depending on 1x/2x/3x press count
on_multi_click:
# -- Single click: one quick press & release --
- timing:
- ON for at most 400ms
- OFF for at least 200ms
then:
- mqtt.publish:
topic: "${mqtt_remote_device1_command_topic}"
payload: "${mqtt_remote_device1_command1}"
# -- Double click: two quick presses/releases --
- timing:
- ON for at most 400ms
- OFF for at most 400ms
- ON for at most 400ms
- OFF for at least 200ms
then:
- mqtt.publish:
topic: "${mqtt_remote_device1_command_topic}"
payload: "${mqtt_remote_device1_command2}"
# -- Triple click: three quick presses/releases --
- timing:
- ON for at most 400ms
- OFF for at most 400ms
- ON for at most 400ms
- OFF for at most 400ms
- ON for at most 400ms
- OFF for at least 200ms
then:
- mqtt.publish:
topic: "${mqtt_remote_device1_command_topic}"
payload: "${mqtt_remote_device1_command3}"
#:########################################################################################:#
# SWITCH COMPONENT:
# https://esphome.io/components/switch/
#:########################################################################################:#
switch:
- platform: gpio
name: "Relay 1: ${switch_1_name}"
pin: P14 #GPIO14
id: Relay_1
restore_mode: ${relay_restore_mode}
on_turn_on:
- switch.turn_on: Relay_2
- switch.turn_on: Relay_3
- platform: gpio
name: "Relay 2: ${switch_2_name}"
pin: P16 #GPIO16
id: Relay_2
restore_mode: ${relay_restore_mode}
- platform: gpio
name: "Relay 3: ${switch_3_name}"
pin: P15 #GPIO15
id: Relay_3
restore_mode: ${relay_restore_mode}
#:########################################################################################:#
# TEMPLATE COMPONENT:
# Virtual group switch for Home Assistant
#:########################################################################################:#
- platform: template
name: "All Main Bathroom Lights"
id: all_main_bathroom_lights
optimistic: false
restore_mode: RESTORE_DEFAULT_OFF
lambda: |-
return id(Relay_1).state || id(Relay_2).state || id(Relay_3).state;
turn_on_action:
- switch.turn_on: Relay_2
turn_off_action:
#- switch.turn_off: Relay_1
- switch.turn_off: Relay_2
- switch.turn_off: Relay_3
Reference in New Issue View Git Blame Copy Permalink