zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
5c5256caa92647df6868855622d5bfaf04dd5923
zorruno-homeassistant/esphome/esp-entrancebathrmlights.yaml
T
ESPHome Device Builder 15e9903b91 Edit esp-entrancebathrmlights.yaml
2026-06-28 00:02:28 +12:00

334 lines
13 KiB
YAML
Raw Blame History

#:########################################################################################:#
# TITLE: ENTRANCE BATHROOM LIGHTSWITCH
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-entrancebathrmlights.yaml
#:########################################################################################:#
# VERSIONS:
# V4.1 2026-06-27 Changed fan timer back to MM:SS with 1 second countdown and 00:00 when fan is off
# V4.0 2026-06-27 Added extract fan timer enable switch and countdown sensor
# V3.9 2026-03-11 Updated yaml to zorruno layout V1.1
# V3.8 2026-02-25 Updated yaml to zorruno layout V1.1
# V3.7 2025-09-34 Upload to this bathroom (as noted in original header)
# V3.5 2025-07-24 YAML tidyups
#:########################################################################################:#
# HARDWARE:
# - Zemismart KS-811 Double push button (ESP8266)
# - ESP8266 board: esp01_1m
# - Pinout/schematic:
# https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
#:########################################################################################:#
# OPERATION NOTES:
# - Entrance bathroom switch with 2 outputs:
# 1) Main Lights
# 2) Extract Fan
#
# - Optional extract fan timer:
# - Controlled by the "Fan Timer Enabled" switch.
# - When enabled, if the light is OFF and the fan is ON, the fan will run for the
# configured fan_timer_duration_minutes, then turn OFF.
# - Countdown starts when the light turns OFF while the fan is ON.
# - Countdown also starts when the fan turns ON while the light is already OFF.
# - Countdown is cancelled/reset if the light turns ON or the fan turns OFF manually.
# - The timer remaining sensor shows MM:SS while counting down.
# - When the fan is OFF, the timer remaining sensor shows 00:00.
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant OFFLINE, but Network and MQTT ONLINE
# - Local button control continues to toggle relays.
# - Fan timer logic continues locally on the ESP device.
# - MQTT/API publishing to HA may not be available until HA returns.
# b) MQTT OFFLINE (or broker unreachable)
# - Local button control continues to toggle relays.
# - Fan timer logic continues locally on the ESP device.
# - MQTT state updates (if any) will not publish.
# c) Entire WiFi/Network OFFLINE
# - Local button control continues to toggle relays.
# - Fan timer logic continues locally on the ESP device.
# - Accurate time is NOT needed (SNTP not needed).
#:########################################################################################:#
#:########################################################################################:#
# SUBSTITUTIONS: Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
# Device Naming
device_name: "esp-entrancebathrmlights"
friendly_name: "Entrance Bathroom Lightswitch (2)"
description_comment: "Entrance bathroom lightswitch using a Zemismart KS-811 Double Push Button. Main Lights (1), Extract Fan (2), Fan Timer (Layout V1.1)"
device_area: "Entranceway" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "Zemismart Technologies.KS-811 Double"
project_version: "v4.1"
# Passwords & Secrets
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
static_ip_address: !secret esp-entrancebathrmlights_ip
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
# Don't forget to switch it back when changed.
current_ip_address: ${static_ip_address}
# Device Settings
log_level: "INFO" # NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for general sensors etc
# Switch Naming
switch_1_name: "Main Lights"
switch_2_name: "Extract Fan"
# Fan Timer Settings
fan_timer_duration_minutes: "10"
#:########################################################################################:#
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
local_current_ip_address: "${current_ip_address}"
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
common_api: !include
file: common/api_common.yaml
#file: common/api_common_noencryption.yaml
vars:
local_api_key: "${api_key}"
#### MQTT ####
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
#### WEB PORTAL ####
#common_webportal: !include common/webportal_common.yaml
#### SNTP (Only use if you want/need accurate timeclocks) ####
#common_sntp: !include common/sntp_common.yaml
#### DIAGNOSTICS Sensors ####
diag_basic: !include common/include_basic_diag_sensors.yaml
diag_more: !include common/include_more_diag_sensors.yaml
#diag_debug: !include common/include_debug_diag_sensors.yaml
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
#:########################################################################################:#
# ESPHOME
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}" # Appears on the esphome page in HA
area: "${device_area}"
project:
name: "${project_name}"
version: "${project_version}"
#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK
# https://esphome.io/components/esp8266.html
#:########################################################################################:#
esp8266:
board: esp01_1m
early_pin_init: false # Initialise pins early to known values. Recommended false where switches are involved. Defaults to true.
board_flash_mode: dout # Default is dout
#:########################################################################################:#
# LOGGING
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
level: "${log_level}"
#baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
#esp8266_store_log_strings_in_flash: false
#tx_buffer_size: 64
#:########################################################################################:#
# STATUS LED
# https://esphome.io/components/status_led.html
#:########################################################################################:#
status_led:
pin:
number: GPIO2
inverted: true
#:########################################################################################:#
# GLOBALS
# https://esphome.io/components/globals.html
#:########################################################################################:#
globals:
- id: fan_timer_counting_down
type: bool
restore_value: false
initial_value: "false"
- id: fan_timer_remaining_seconds
type: int
restore_value: false
initial_value: "0"
#:########################################################################################:#
# BINARY SENSORS
# https://esphome.io/components/binary_sensor/
#:########################################################################################:#
binary_sensor:
- platform: gpio
pin:
number: GPIO16
mode: INPUT
inverted: true
use_interrupt: false # GPIO16 pin doesn't support interrupts so use polling. Only suppresses a warning.
name: "Button 1: ${switch_1_name}"
on_press:
- switch.toggle: Relay_1
- platform: gpio
pin:
number: GPIO5
mode: INPUT
inverted: true
name: "Button 2: ${switch_2_name}"
on_press:
- switch.toggle: Relay_2
#:########################################################################################:#
# SWITCH
# https://esphome.io/components/switch/
#:########################################################################################:#
switch:
- platform: template
name: "Fan Timer Enabled"
id: fan_timer_enabled
icon: "mdi:fan-clock"
optimistic: true
restore_mode: RESTORE_DEFAULT_ON
entity_category: config
turn_on_action:
- script.execute: fan_timer_evaluate
turn_off_action:
- script.execute: fan_timer_cancel
- platform: gpio
name: "Relay 1: ${switch_1_name}"
pin: GPIO13
id: Relay_1
on_turn_on:
- script.execute: fan_timer_evaluate
on_turn_off:
- script.execute: fan_timer_evaluate
- platform: gpio
name: "Relay 2: ${switch_2_name}"
pin: GPIO12
id: Relay_2
on_turn_on:
- script.execute: fan_timer_evaluate
on_turn_off:
- script.execute: fan_timer_evaluate
#:########################################################################################:#
# TEXT SENSORS
# https://esphome.io/components/text_sensor/
#:########################################################################################:#
text_sensor:
- platform: template
name: "Fan Timer Remaining"
id: fan_timer_remaining_text
icon: "mdi:timer-outline"
update_interval: 1s
lambda: |-
int seconds = 0;
// Only show the countdown while the timer is actually operating.
// If the timer is not operating, always show 00:00.
if (id(fan_timer_counting_down)) {
seconds = id(fan_timer_remaining_seconds);
}
if (seconds < 0) {
seconds = 0;
}
int mins = seconds / 60;
int secs = seconds % 60;
char buffer[8];
snprintf(buffer, sizeof(buffer), "%02d:%02d", mins, secs);
return std::string(buffer);
#:########################################################################################:#
# SCRIPTS
# https://esphome.io/components/script.html
#:########################################################################################:#
script:
- id: fan_timer_cancel
mode: restart
then:
- lambda: |-
id(fan_timer_counting_down) = false;
id(fan_timer_remaining_seconds) = 0;
- component.update: fan_timer_remaining_text
- id: fan_timer_evaluate
mode: restart
then:
- if:
condition:
lambda: |-
return id(fan_timer_enabled).state && !id(Relay_1).state && id(Relay_2).state;
then:
- lambda: |-
id(fan_timer_remaining_seconds) = ${fan_timer_duration_minutes} * 60;
id(fan_timer_counting_down) = true;
- component.update: fan_timer_remaining_text
else:
- script.execute: fan_timer_cancel
#:########################################################################################:#
# INTERVALS
# https://esphome.io/components/interval.html
#:########################################################################################:#
interval:
- interval: 1s
then:
- if:
condition:
lambda: |-
return id(fan_timer_counting_down);
then:
- if:
condition:
lambda: |-
return id(fan_timer_enabled).state && !id(Relay_1).state && id(Relay_2).state;
then:
- lambda: |-
if (id(fan_timer_remaining_seconds) > 0) {
id(fan_timer_remaining_seconds) -= 1;
}
- component.update: fan_timer_remaining_text
- if:
condition:
lambda: |-
return id(fan_timer_remaining_seconds) <= 0;
then:
- lambda: |-
id(fan_timer_counting_down) = false;
id(fan_timer_remaining_seconds) = 0;
- component.update: fan_timer_remaining_text
- switch.turn_off: Relay_2
else:
- script.execute: fan_timer_cancel
Reference in New Issue View Git Blame Copy Permalink