ESPHome Device Builder
1047 lines
35 KiB
YAML
1047 lines
35 KiB
YAML
#:########################################################################################:#
|
|
# TITLE: MASTER BEDROOM BEDSIDE LAMP BULB
|
|
# zorruno.com layout v1.1 2026
|
|
#:########################################################################################:#
|
|
# REPO:
|
|
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-bedrm1arlecbulb.yaml
|
|
#:########################################################################################:#
|
|
# VERSIONS:
|
|
# v1.3 2026-07-20 Simplified local MQTT command and status topics to the device root
|
|
# v1.2 2026-02-25 Updated yaml to zorruno layout V1.1
|
|
# v1.1 2026-02-21 Add "Jump Fade Up/Down" switch + configurable Jump Fade (%)
|
|
# v1.0 2026-02-21 Initial version (ported from Athom bulb YAML to Arlec GLD120HA)
|
|
#:########################################################################################:#
|
|
# HARDWARE:
|
|
# - Arlec Grid Connect Smart LED Globe RGB (GLD120HA) - B22
|
|
# - ESP8266 (PWM, 5x channels) RGB + Warm White + Cold White (RGBWW)
|
|
# - PWM channels:
|
|
# - Red GPIO4
|
|
# - Green GPIO12
|
|
# - Blue GPIO14
|
|
# - Warm White GPIO13
|
|
# - Cold White GPIO5
|
|
#:########################################################################################:#
|
|
# OPERATION NOTES:
|
|
# - Keeps the "preferred control" ramping / min-max / watchdog / restore logic.
|
|
# - All ramping and "Output Set (0-100)" controls FORCE the bulb into Warm White endpoint
|
|
# (everyday dimming uses Warm White channel only, not mixed CT).
|
|
# - Full RGB and CT control is still available from HA using the normal light entity.
|
|
# - Max On watchdog turns the whole bulb OFF at the time limit (all channels).
|
|
# - Jump Fade switch behavior:
|
|
# - ON: jump to (jump% of max cap), then fade up to full (normal fade-up).
|
|
# - OFF: jump down to (current - current*jump%), then fade down to OFF (normal fade-down).
|
|
#:########################################################################################:#
|
|
# OFFLINE NOTES:
|
|
# a) Home Assistant OFFLINE, but Network and MQTT ONLINE
|
|
# - Bulb continues local operation and restores per configured restart action.
|
|
# - MQTT state publishing may not be visible in HA until HA returns.
|
|
# b) MQTT OFFLINE (or broker unreachable)
|
|
# - Bulb still operates via HA API (if available) and local logic.
|
|
# - MQTT local command topics will not work while MQTT is down.
|
|
# c) Entire WiFi/Network OFFLINE
|
|
# - Bulb still operates locally (last state/restore behavior as configured).
|
|
# - Accurate time is NOT needed (SNTP not needed).
|
|
#:########################################################################################:#
|
|
|
|
#:########################################################################################:#
|
|
# SUBSTITUTIONS: Specific device variable substitutions
|
|
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
|
#:########################################################################################:#
|
|
substitutions:
|
|
# Device Naming
|
|
device_name: "esp-bedrm1arlecbulb" # yaml file should be device_name.yaml
|
|
friendly_name: "Master Bedroom Bedside Lamp Arlec Bulb"
|
|
description_comment: "Bedside lightbulb using gridconnect Arlec RGB bulb (Layout V1.1)"
|
|
device_area: "Master Bedroom"
|
|
|
|
# Project Naming
|
|
project_name: "Grid Connect GLD120HA RGBWW.Arlec"
|
|
project_version: "v1.3"
|
|
|
|
# Passwords & Secrets (Unfortunately, you can't use substitutions inside secret names)
|
|
# Re-using your existing bulb flasher secrets (adjust if you prefer per-device secrets)
|
|
api_key: !secret esp-api_key
|
|
ota_pass: !secret esp-ota_pass
|
|
static_ip_address: !secret esp-bedrm1arlecbulb_ip
|
|
|
|
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
|
|
# Don't forget to switch it back when changed.
|
|
current_ip_address: ${static_ip_address}
|
|
|
|
# MQTT LOCAL Controls (optional local control method)
|
|
mqtt_local_device_name: "bed1-bedsidelamp"
|
|
mqtt_local_command_main_topic: !secret mqtt_command_main_topic
|
|
mqtt_local_status_main_topic: !secret mqtt_status_main_topic
|
|
mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_local_device_name}"
|
|
mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_local_device_name}"
|
|
mqtt_local_device_command_ON: "ON"
|
|
mqtt_local_device_command_OFF: "OFF"
|
|
|
|
# Device Specific Settings
|
|
log_level: "NONE" # NONE, ERROR, WARN, INFO, DEBUG, VERBOSE, VERY_VERBOSE
|
|
update_interval: "20s"
|
|
led_gamma: "2.8"
|
|
minimum_led_output: "1" # % If at this value or below, we'll switch it completely off
|
|
maximum_led_output: "80" # % Hard cap
|
|
max_on_default_hours: "24" # 0 = no automatic turn-off
|
|
pwm_frequency: "1000" # Hz
|
|
|
|
# Warm/cold endpoints (reported range around 3000K-5700K)
|
|
bulb_warm_kelvin: "3000 K"
|
|
bulb_cold_kelvin: "5700 K"
|
|
|
|
# Arlec GLD120HA GPIO mapping (PWM)
|
|
bulb_red_pin: GPIO4
|
|
bulb_green_pin: GPIO12
|
|
bulb_blue_pin: GPIO14
|
|
bulb_warm_white_pin: GPIO13
|
|
bulb_cold_white_pin: GPIO5
|
|
|
|
#:########################################################################################:#
|
|
# PACKAGES: Included Common Packages
|
|
# https://esphome.io/components/packages.html
|
|
#:########################################################################################:#
|
|
packages:
|
|
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
|
|
common_wifi: !include
|
|
file: common/network_common.yaml
|
|
vars:
|
|
local_device_name: "${device_name}"
|
|
local_static_ip_address: "${static_ip_address}"
|
|
local_ota_pass: "${ota_pass}"
|
|
local_current_ip_address: "${current_ip_address}"
|
|
|
|
#### HOME ASSISTANT API ####
|
|
common_api: !include
|
|
file: common/api_common.yaml
|
|
vars:
|
|
local_api_key: "${api_key}"
|
|
|
|
#### MQTT ####
|
|
common_mqtt: !include
|
|
file: common/mqtt_common.yaml
|
|
vars:
|
|
local_device_name: "${device_name}"
|
|
|
|
#### DIAGNOSTICS Sensors ####
|
|
diag_basic: !include common/include_basic_diag_sensors.yaml
|
|
diag_more: !include common/include_more_diag_sensors.yaml
|
|
#diag_debug: !include common/include_debug_diag_sensors.yaml
|
|
|
|
#:########################################################################################:#
|
|
# ESPHOME CORE CONFIGURATION
|
|
# https://esphome.io/components/esphome.html
|
|
#:########################################################################################:#
|
|
esphome:
|
|
name: "${device_name}"
|
|
friendly_name: "${friendly_name}"
|
|
comment: "${description_comment}"
|
|
area: "${device_area}"
|
|
project:
|
|
name: "${project_name}"
|
|
version: "${project_version}"
|
|
|
|
on_boot:
|
|
# Run later so everything is initialised before we touch states.
|
|
priority: 200
|
|
then:
|
|
# Keep the HA dropdown in sync with the stored mode
|
|
- lambda: |-
|
|
switch (id(restart_mode)) {
|
|
case 0: id(restart_action).publish_state("Fade up to full"); break;
|
|
case 1: id(restart_action).publish_state("Restore Brightness"); break;
|
|
case 2: default: id(restart_action).publish_state("Remain Off"); break;
|
|
}
|
|
|
|
# Mode 0: Fade up to full (obeys fade settings; forces Warm endpoint)
|
|
- if:
|
|
condition:
|
|
lambda: "return id(restart_mode) == 0;"
|
|
then:
|
|
- lambda: "id(ramp_switch_target_on) = true;"
|
|
- script.execute: ramp_on_script
|
|
|
|
# Mode 1: Restore Brightness (deferred; forces Warm endpoint)
|
|
- if:
|
|
condition:
|
|
lambda: "return id(restart_mode) == 1;"
|
|
then:
|
|
- script.execute: deferred_restore_brightness
|
|
|
|
# Mode 2: Remain Off
|
|
- if:
|
|
condition:
|
|
lambda: "return id(restart_mode) == 2;"
|
|
then:
|
|
- script.stop: ramp_on_script
|
|
- script.stop: ramp_off_script
|
|
- lambda: "id(ramp_switch_target_on) = false;"
|
|
- light.turn_off:
|
|
id: bulb_light
|
|
transition_length: 0s
|
|
|
|
# Boot complete: allow OFF handlers again
|
|
- lambda: "id(booting) = false;"
|
|
|
|
#:########################################################################################:#
|
|
# ESP PLATFORM AND FRAMEWORK
|
|
# https://esphome.io/components/esp8266.html
|
|
#:########################################################################################:#
|
|
esp8266:
|
|
board: esp01_1m
|
|
restore_from_flash: true
|
|
|
|
mdns:
|
|
disabled: true
|
|
|
|
preferences:
|
|
flash_write_interval: 1min
|
|
|
|
#:########################################################################################:#
|
|
# GLOBAL VARIABLES
|
|
# https://esphome.io/components/globals.html
|
|
#:########################################################################################:#
|
|
globals:
|
|
- id: min_brightness_pct
|
|
type: int
|
|
restore_value: true
|
|
initial_value: "${minimum_led_output}"
|
|
|
|
- id: max_brightness_pct
|
|
type: int
|
|
restore_value: false
|
|
initial_value: "${maximum_led_output}"
|
|
|
|
- id: max_on_hours
|
|
type: int
|
|
restore_value: true
|
|
initial_value: "${max_on_default_hours}"
|
|
|
|
- id: led_gamma_f
|
|
type: float
|
|
restore_value: false
|
|
initial_value: ${led_gamma}
|
|
|
|
- id: ramp_up_ms
|
|
type: int
|
|
restore_value: true
|
|
initial_value: "5000"
|
|
|
|
- id: ramp_down_ms
|
|
type: int
|
|
restore_value: true
|
|
initial_value: "20000"
|
|
|
|
- id: restart_mode
|
|
type: int
|
|
restore_value: true
|
|
initial_value: "0" # 0=Fade full, 1=Restore brightness, 2=Remain off
|
|
|
|
- id: ramp_switch_target_on
|
|
type: bool
|
|
restore_value: true
|
|
initial_value: "false"
|
|
|
|
- id: suppress_slider_sync
|
|
type: bool
|
|
restore_value: false
|
|
initial_value: "false"
|
|
|
|
- id: last_brightness_pct
|
|
type: float
|
|
restore_value: true
|
|
initial_value: "0.0"
|
|
|
|
- id: last_set_pos
|
|
type: int
|
|
restore_value: false
|
|
initial_value: "-1"
|
|
|
|
- id: last_ramp_ms
|
|
type: int
|
|
restore_value: false
|
|
initial_value: "0"
|
|
|
|
- id: restore_target_pct
|
|
type: float
|
|
restore_value: false
|
|
initial_value: "0.0"
|
|
|
|
- id: is_ramping
|
|
type: bool
|
|
restore_value: false
|
|
initial_value: "false"
|
|
|
|
- id: booting
|
|
type: bool
|
|
restore_value: false
|
|
initial_value: "true"
|
|
|
|
- id: ramping_for_off
|
|
type: bool
|
|
restore_value: false
|
|
initial_value: "false"
|
|
|
|
# Jump Fade percentage
|
|
- id: jump_fade_pct
|
|
type: int
|
|
restore_value: true
|
|
initial_value: "15"
|
|
|
|
#:########################################################################################:#
|
|
# LOGGING
|
|
# https://esphome.io/components/logger.html
|
|
#:########################################################################################:#
|
|
logger:
|
|
level: "${log_level}"
|
|
baud_rate: 0
|
|
|
|
#:########################################################################################:#
|
|
# MQTT COMMANDS (adds device-specific triggers to common MQTT)
|
|
#:########################################################################################:#
|
|
mqtt:
|
|
on_message:
|
|
- topic: "${mqtt_local_command_topic}"
|
|
payload: "${mqtt_local_device_command_ON}"
|
|
then:
|
|
- switch.turn_on: bulb_ramp_switch
|
|
|
|
- topic: "${mqtt_local_command_topic}"
|
|
payload: "${mqtt_local_device_command_OFF}"
|
|
then:
|
|
- switch.turn_off: bulb_ramp_switch
|
|
|
|
#:########################################################################################:#
|
|
# SWITCH
|
|
# https://esphome.io/components/switch/
|
|
#:########################################################################################:#
|
|
switch:
|
|
- platform: template
|
|
id: bulb_ramp_switch
|
|
name: "${friendly_name} Fade Up-Down"
|
|
icon: mdi:lightbulb-on-outline
|
|
lambda: |-
|
|
return id(ramp_switch_target_on);
|
|
turn_on_action:
|
|
- lambda: |-
|
|
id(ramp_switch_target_on) = true;
|
|
- script.stop: ramp_off_script
|
|
- script.execute: ramp_on_script
|
|
turn_off_action:
|
|
- lambda: |-
|
|
id(ramp_switch_target_on) = false;
|
|
- script.stop: ramp_on_script
|
|
- script.execute: ramp_off_script
|
|
|
|
- platform: template
|
|
id: bulb_jump_ramp_switch
|
|
name: "${friendly_name} Jump Fade Up-Down"
|
|
icon: mdi:lightbulb-auto
|
|
lambda: |-
|
|
return id(ramp_switch_target_on);
|
|
turn_on_action:
|
|
- lambda: |-
|
|
id(ramp_switch_target_on) = true;
|
|
- script.execute: jump_ramp_on_script
|
|
turn_off_action:
|
|
- lambda: |-
|
|
id(ramp_switch_target_on) = false;
|
|
- script.execute: jump_ramp_off_script
|
|
|
|
#:########################################################################################:#
|
|
# BUTTON
|
|
# https://esphome.io/components/button/index.html
|
|
#:########################################################################################:#
|
|
button:
|
|
- platform: template
|
|
id: fade_up_button
|
|
name: "${friendly_name} Fade Up"
|
|
icon: mdi:arrow-up-bold
|
|
on_press:
|
|
- lambda: |-
|
|
id(ramp_switch_target_on) = true;
|
|
id(bulb_ramp_switch).publish_state(true);
|
|
- script.stop: ramp_off_script
|
|
- script.execute: ramp_on_script
|
|
|
|
- platform: template
|
|
id: fade_down_button
|
|
name: "${friendly_name} Fade Down"
|
|
icon: mdi:arrow-down-bold
|
|
on_press:
|
|
- lambda: |-
|
|
id(ramp_switch_target_on) = false;
|
|
id(bulb_ramp_switch).publish_state(false);
|
|
- script.stop: ramp_on_script
|
|
- script.execute: ramp_off_script
|
|
|
|
- platform: template
|
|
id: fade_stop_button
|
|
name: "${friendly_name} Fade Stop"
|
|
icon: mdi:pause
|
|
on_press:
|
|
- script.stop: ramp_on_script
|
|
- script.stop: ramp_off_script
|
|
- lambda: |-
|
|
id(ramping_for_off) = false;
|
|
id(is_ramping) = false;
|
|
|
|
const auto &cv = id(bulb_light).current_values;
|
|
if (cv.is_on()) {
|
|
auto call = id(bulb_light).make_call();
|
|
call.set_state(true);
|
|
call.set_brightness(cv.get_brightness());
|
|
call.set_transition_length(0);
|
|
call.perform();
|
|
}
|
|
|
|
if (cv.is_on()) {
|
|
float pct = cv.get_brightness() * 100.0f;
|
|
id(last_brightness_pct) = pct;
|
|
}
|
|
|
|
#:########################################################################################:#
|
|
# SELECT
|
|
# https://esphome.io/components/select/index.html
|
|
#:########################################################################################:#
|
|
select:
|
|
- platform: template
|
|
id: restart_action
|
|
name: "${friendly_name} Restart Action"
|
|
icon: mdi:restart
|
|
optimistic: true
|
|
options:
|
|
- "Fade up to full"
|
|
- "Restore Brightness"
|
|
- "Remain Off"
|
|
initial_option: "Restore Brightness"
|
|
set_action:
|
|
- lambda: |-
|
|
if (x == "Fade up to full") {
|
|
id(restart_mode) = 0;
|
|
} else if (x == "Restore Brightness") {
|
|
id(restart_mode) = 1;
|
|
} else {
|
|
id(restart_mode) = 2;
|
|
}
|
|
|
|
#:########################################################################################:#
|
|
# SENSORS
|
|
# https://esphome.io/components/sensor/
|
|
#:########################################################################################:#
|
|
sensor:
|
|
- platform: template
|
|
id: bulb_output_pct
|
|
name: "${friendly_name} Output (%)"
|
|
unit_of_measurement: "%"
|
|
icon: mdi:percent
|
|
accuracy_decimals: 0
|
|
update_interval: 2s
|
|
lambda: |-
|
|
const auto &cv = id(bulb_light).current_values;
|
|
return cv.is_on() ? (float) (int)(cv.get_brightness() * 100.0f + 0.5f) : 0.0f;
|
|
|
|
on_value:
|
|
then:
|
|
- lambda: |-
|
|
if (!id(suppress_slider_sync)) {
|
|
float actual = x;
|
|
float minp = (float) id(min_brightness_pct);
|
|
float maxp = (float) id(max_brightness_pct);
|
|
if (maxp <= minp) maxp = minp + 1.0f;
|
|
|
|
float pos = (actual <= 0.0f) ? 0.0f : ((actual - minp) * 100.0f / (maxp - minp));
|
|
if (pos < 0.0f) pos = 0.0f;
|
|
if (pos > 100.0f) pos = 100.0f;
|
|
int pos_i = (int) floorf(pos + 0.5f);
|
|
|
|
if (pos_i != id(last_set_pos)) {
|
|
id(last_set_pos) = pos_i;
|
|
id(led_output_set_pct).publish_state(pos_i);
|
|
}
|
|
}
|
|
|
|
- platform: template
|
|
id: bulb_output_pwm_pct
|
|
name: "${friendly_name} Output PWM (%)"
|
|
unit_of_measurement: "%"
|
|
icon: mdi:square-wave
|
|
accuracy_decimals: 1
|
|
update_interval: 2s
|
|
lambda: |-
|
|
const auto &cv = id(bulb_light).current_values;
|
|
if (!cv.is_on()) return 0.0f;
|
|
const float lin = cv.get_brightness();
|
|
float pwm = powf(lin, id(led_gamma_f));
|
|
if (pwm < 0.0f) pwm = 0.0f;
|
|
if (pwm > 1.0f) pwm = 1.0f;
|
|
return pwm * 100.0f;
|
|
|
|
#:########################################################################################:#
|
|
# OUTPUTS: 5 x PWM channels for the Arlec GLD120HA RGBWW bulb
|
|
# https://esphome.io/components/output/
|
|
#:########################################################################################:#
|
|
output:
|
|
- platform: esp8266_pwm
|
|
id: output_red
|
|
pin: ${bulb_red_pin}
|
|
frequency: ${pwm_frequency}
|
|
|
|
- platform: esp8266_pwm
|
|
id: output_green
|
|
pin: ${bulb_green_pin}
|
|
frequency: ${pwm_frequency}
|
|
|
|
- platform: esp8266_pwm
|
|
id: output_blue
|
|
pin: ${bulb_blue_pin}
|
|
frequency: ${pwm_frequency}
|
|
|
|
- platform: esp8266_pwm
|
|
id: output_warm_white
|
|
pin: ${bulb_warm_white_pin}
|
|
frequency: ${pwm_frequency}
|
|
|
|
- platform: esp8266_pwm
|
|
id: output_cold_white
|
|
pin: ${bulb_cold_white_pin}
|
|
frequency: ${pwm_frequency}
|
|
|
|
#:########################################################################################:#
|
|
# LIGHT: RGBWW (correct for this bulb)
|
|
# https://esphome.io/components/light/
|
|
#:########################################################################################:#
|
|
light:
|
|
- platform: rgbww
|
|
id: bulb_light
|
|
name: "${friendly_name}"
|
|
icon: mdi:lightbulb
|
|
|
|
red: output_red
|
|
green: output_green
|
|
blue: output_blue
|
|
warm_white: output_warm_white
|
|
cold_white: output_cold_white
|
|
|
|
warm_white_color_temperature: ${bulb_warm_kelvin}
|
|
cold_white_color_temperature: ${bulb_cold_kelvin}
|
|
|
|
color_interlock: true
|
|
|
|
# Keep OFF at boot to avoid instant restore flashes; boot script handles behavior.
|
|
restore_mode: ALWAYS_OFF
|
|
|
|
default_transition_length: 2s
|
|
gamma_correct: "${led_gamma}"
|
|
|
|
on_turn_on:
|
|
- mqtt.publish:
|
|
topic: "${mqtt_local_status_topic}"
|
|
payload: "${mqtt_local_device_command_ON}"
|
|
retain: true
|
|
- lambda: |-
|
|
if (!id(ramping_for_off)) {
|
|
id(ramp_switch_target_on) = true;
|
|
}
|
|
- script.stop: max_on_watchdog
|
|
- if:
|
|
condition:
|
|
lambda: "return id(max_on_hours) > 0;"
|
|
then:
|
|
- script.execute: max_on_watchdog
|
|
|
|
on_turn_off:
|
|
- if:
|
|
condition:
|
|
lambda: "return !id(booting);"
|
|
then:
|
|
- mqtt.publish:
|
|
topic: "${mqtt_local_status_topic}"
|
|
payload: "${mqtt_local_device_command_OFF}"
|
|
retain: true
|
|
- lambda: "id(ramp_switch_target_on) = false;"
|
|
- script.stop: max_on_watchdog
|
|
- lambda: |-
|
|
id(last_brightness_pct) = 0.0f;
|
|
id(last_set_pos) = 0;
|
|
id(led_output_set_pct).publish_state(0);
|
|
|
|
on_state:
|
|
- lambda: |-
|
|
const float cap = id(max_brightness_pct) / 100.0f;
|
|
const auto &cv = id(bulb_light).current_values;
|
|
if (!cv.is_on()) return;
|
|
const float b = cv.get_brightness();
|
|
if (b <= cap + 0.001f) return;
|
|
|
|
auto call = id(bulb_light).make_call();
|
|
call.set_state(true);
|
|
call.set_brightness(cap);
|
|
call.set_transition_length(0);
|
|
call.perform();
|
|
|
|
#:########################################################################################:#
|
|
# NUMBER
|
|
# https://esphome.io/components/number/
|
|
#:########################################################################################:#
|
|
number:
|
|
- platform: template
|
|
id: cfg_ramp_up_s
|
|
name: "${friendly_name} Fade Up Time (s)"
|
|
entity_category: config
|
|
unit_of_measurement: s
|
|
icon: mdi:timer-sand
|
|
mode: slider
|
|
min_value: 0
|
|
max_value: 60
|
|
step: 1
|
|
lambda: |-
|
|
return (float) id(ramp_up_ms) / 1000.0f;
|
|
set_action:
|
|
- lambda: |-
|
|
int secs = (int) floorf(x + 0.5f);
|
|
if (secs < 0) secs = 0;
|
|
if (secs > 60) secs = 60;
|
|
id(ramp_up_ms) = secs * 1000;
|
|
id(cfg_ramp_up_s).publish_state((float) secs);
|
|
|
|
- platform: template
|
|
id: cfg_ramp_down_s
|
|
name: "${friendly_name} Fade Down Time (s)"
|
|
entity_category: config
|
|
unit_of_measurement: s
|
|
icon: mdi:timer-sand-complete
|
|
mode: slider
|
|
min_value: 0
|
|
max_value: 60
|
|
step: 1
|
|
lambda: |-
|
|
return (float) id(ramp_down_ms) / 1000.0f;
|
|
set_action:
|
|
- lambda: |-
|
|
int secs = (int) floorf(x + 0.5f);
|
|
if (secs < 0) secs = 0;
|
|
if (secs > 60) secs = 60;
|
|
id(ramp_down_ms) = secs * 1000;
|
|
id(cfg_ramp_down_s).publish_state((float) secs);
|
|
|
|
- platform: template
|
|
id: cfg_jump_fade_pct
|
|
name: "${friendly_name} Jump Fade (%)"
|
|
entity_category: config
|
|
unit_of_measurement: "%"
|
|
icon: mdi:percent
|
|
mode: slider
|
|
min_value: 0
|
|
max_value: 100
|
|
step: 1
|
|
lambda: |-
|
|
return (float) id(jump_fade_pct);
|
|
set_action:
|
|
- lambda: |-
|
|
int v = (int) floorf(x + 0.5f);
|
|
if (v < 0) v = 0;
|
|
if (v > 100) v = 100;
|
|
id(jump_fade_pct) = v;
|
|
id(cfg_jump_fade_pct).publish_state((float) v);
|
|
|
|
- platform: template
|
|
id: led_output_set_pct
|
|
name: "${friendly_name} Output Set (0-100)"
|
|
icon: mdi:tune
|
|
mode: slider
|
|
min_value: 0
|
|
max_value: 100
|
|
step: 1
|
|
lambda: |-
|
|
const auto &cv = id(bulb_light).current_values;
|
|
float actual = cv.is_on() ? (cv.get_brightness() * 100.0f) : 0.0f;
|
|
float minp = (float) id(min_brightness_pct);
|
|
float maxp = (float) id(max_brightness_pct);
|
|
if (maxp <= minp) maxp = minp + 1.0f;
|
|
if (actual <= 0.0f) return 0.0f;
|
|
float pos = (actual - minp) * 100.0f / (maxp - minp);
|
|
if (pos < 0.0f) pos = 0.0f;
|
|
if (pos > 100.0f) pos = 100.0f;
|
|
return floorf(pos + 0.5f);
|
|
set_action:
|
|
- if:
|
|
condition:
|
|
lambda: "return x <= 0.0f;"
|
|
then:
|
|
- lambda: "id(suppress_slider_sync) = true;"
|
|
- script.stop: ramp_on_script
|
|
- script.stop: ramp_off_script
|
|
- light.turn_off:
|
|
id: bulb_light
|
|
transition_length: 200ms
|
|
- lambda: |-
|
|
id(ramp_switch_target_on) = false;
|
|
id(led_output_set_pct).publish_state(0);
|
|
id(last_brightness_pct) = 0.0f;
|
|
id(last_set_pos) = 0;
|
|
- delay: 400ms
|
|
- lambda: "id(suppress_slider_sync) = false;"
|
|
else:
|
|
- lambda: |-
|
|
id(suppress_slider_sync) = true;
|
|
float pos = x;
|
|
if (pos < 1.0f) pos = 1.0f;
|
|
if (pos > 100.0f) pos = 100.0f;
|
|
id(led_output_set_pct).publish_state((int) floorf(pos + 0.5f));
|
|
- script.stop: ramp_off_script
|
|
- script.stop: ramp_on_script
|
|
- light.turn_on:
|
|
id: bulb_light
|
|
color_temperature: "${bulb_warm_kelvin}"
|
|
brightness: !lambda |-
|
|
float pos = id(led_output_set_pct).state;
|
|
float minp = (float) id(min_brightness_pct);
|
|
float maxp = (float) id(max_brightness_pct);
|
|
if (maxp <= minp) maxp = minp + 1.0f;
|
|
float out_pct = minp + (pos * (maxp - minp) / 100.0f);
|
|
if (out_pct > maxp) out_pct = maxp;
|
|
return out_pct / 100.0f;
|
|
transition_length: 250ms
|
|
- lambda: |-
|
|
id(ramp_switch_target_on) = true;
|
|
float pos = id(led_output_set_pct).state;
|
|
float minp = (float) id(min_brightness_pct);
|
|
float maxp = (float) id(max_brightness_pct);
|
|
if (maxp <= minp) maxp = minp + 1.0f;
|
|
float out_pct = minp + (pos * (maxp - minp) / 100.0f);
|
|
if (out_pct > maxp) out_pct = maxp;
|
|
id(last_brightness_pct) = out_pct;
|
|
- delay: 400ms
|
|
- lambda: "id(suppress_slider_sync) = false;"
|
|
|
|
- platform: template
|
|
id: cfg_max_on_hours
|
|
name: "${friendly_name} Max On (h)"
|
|
entity_category: config
|
|
unit_of_measurement: h
|
|
icon: mdi:timer-cog
|
|
mode: slider
|
|
min_value: 0
|
|
max_value: 48
|
|
step: 1
|
|
lambda: |-
|
|
return (float) id(max_on_hours);
|
|
set_action:
|
|
- lambda: |-
|
|
int hrs = (int) x;
|
|
if (hrs < 0) hrs = 0;
|
|
if (hrs > 48) hrs = 48;
|
|
id(max_on_hours) = hrs;
|
|
id(cfg_max_on_hours).publish_state((float) hrs);
|
|
- if:
|
|
condition:
|
|
lambda: "return id(bulb_light).current_values.is_on();"
|
|
then:
|
|
- script.stop: max_on_watchdog
|
|
- if:
|
|
condition:
|
|
lambda: "return id(max_on_hours) > 0;"
|
|
then:
|
|
- script.execute: max_on_watchdog
|
|
|
|
#:########################################################################################:#
|
|
# SCRIPTS
|
|
# https://esphome.io/components/script.html
|
|
#:########################################################################################:#
|
|
script:
|
|
- id: ramp_on_script
|
|
mode: restart
|
|
then:
|
|
- lambda: "id(is_ramping) = true;"
|
|
- script.stop: ramp_off_script
|
|
|
|
- if:
|
|
condition:
|
|
lambda: |-
|
|
const auto &cv = id(bulb_light).current_values;
|
|
const float floor = id(min_brightness_pct) / 100.0f;
|
|
return (!cv.is_on()) || (cv.get_brightness() + 0.0005f < floor);
|
|
then:
|
|
- light.turn_on:
|
|
id: bulb_light
|
|
color_temperature: "${bulb_warm_kelvin}"
|
|
brightness: !lambda "return id(min_brightness_pct) / 100.0f;"
|
|
transition_length: 80ms
|
|
|
|
- light.turn_on:
|
|
id: bulb_light
|
|
color_temperature: "${bulb_warm_kelvin}"
|
|
brightness: !lambda "return id(max_brightness_pct) / 100.0f;"
|
|
transition_length: !lambda |-
|
|
const auto &cv = id(bulb_light).current_values;
|
|
const float floor = id(min_brightness_pct) / 100.0f;
|
|
const float cap = id(max_brightness_pct) / 100.0f;
|
|
if (cap <= floor + 0.0005f) { id(last_ramp_ms) = 0; return (uint32_t) 0; }
|
|
|
|
float curr = cv.is_on() ? cv.get_brightness() : 0.0f;
|
|
|
|
if (curr + 0.0005f < floor) {
|
|
id(last_ramp_ms) = id(ramp_up_ms);
|
|
return (uint32_t) id(last_ramp_ms);
|
|
}
|
|
if (curr > cap) curr = cap;
|
|
if (curr < floor) curr = floor;
|
|
|
|
float frac = (cap - curr) / (cap - floor);
|
|
if (frac < 0.0f) frac = 0.0f;
|
|
if (frac > 1.0f) frac = 1.0f;
|
|
|
|
id(last_ramp_ms) = (int) (id(ramp_up_ms) * frac);
|
|
return (uint32_t) id(last_ramp_ms);
|
|
|
|
- delay: !lambda "return (uint32_t) id(last_ramp_ms);"
|
|
- lambda: |-
|
|
id(is_ramping) = false;
|
|
const auto &cv = id(bulb_light).current_values;
|
|
if (cv.is_on()) {
|
|
float pct = cv.get_brightness() * 100.0f;
|
|
id(last_brightness_pct) = pct;
|
|
}
|
|
|
|
- id: ramp_to_target_script
|
|
mode: restart
|
|
then:
|
|
- lambda: "id(is_ramping) = true;"
|
|
- script.stop: ramp_off_script
|
|
|
|
- if:
|
|
condition:
|
|
lambda: |-
|
|
const auto &cv = id(bulb_light).current_values;
|
|
const float floor = id(min_brightness_pct) / 100.0f;
|
|
return (!cv.is_on()) || (cv.get_brightness() + 0.0005f < floor);
|
|
then:
|
|
- light.turn_on:
|
|
id: bulb_light
|
|
color_temperature: "${bulb_warm_kelvin}"
|
|
brightness: !lambda "return id(min_brightness_pct) / 100.0f;"
|
|
transition_length: 80ms
|
|
|
|
- light.turn_on:
|
|
id: bulb_light
|
|
color_temperature: "${bulb_warm_kelvin}"
|
|
brightness: !lambda |-
|
|
float cap_pct = id(restore_target_pct);
|
|
float maxp = (float) id(max_brightness_pct);
|
|
if (cap_pct > maxp) cap_pct = maxp;
|
|
return cap_pct / 100.0f;
|
|
transition_length: !lambda |-
|
|
const auto &cv = id(bulb_light).current_values;
|
|
const float floor = id(min_brightness_pct) / 100.0f;
|
|
|
|
float cap = id(restore_target_pct) / 100.0f;
|
|
const float maxp = id(max_brightness_pct) / 100.0f;
|
|
if (cap > maxp) cap = maxp;
|
|
|
|
if (cap <= floor + 0.0005f) { id(last_ramp_ms) = 0; return (uint32_t) 0; }
|
|
|
|
float curr = cv.is_on() ? cv.get_brightness() : 0.0f;
|
|
|
|
if (curr + 0.0005f < floor) {
|
|
id(last_ramp_ms) = id(ramp_up_ms);
|
|
return (uint32_t) id(last_ramp_ms);
|
|
}
|
|
|
|
if (curr > cap) curr = cap;
|
|
if (curr < floor) curr = floor;
|
|
|
|
float frac = (cap - curr) / (cap - floor);
|
|
if (frac < 0.0f) frac = 0.0f;
|
|
if (frac > 1.0f) frac = 1.0f;
|
|
|
|
id(last_ramp_ms) = (int) (id(ramp_up_ms) * frac);
|
|
return (uint32_t) id(last_ramp_ms);
|
|
|
|
- delay: !lambda "return (uint32_t) id(last_ramp_ms);"
|
|
- lambda: |-
|
|
id(is_ramping) = false;
|
|
const auto &cv = id(bulb_light).current_values;
|
|
if (cv.is_on()) {
|
|
float pct = cv.get_brightness() * 100.0f;
|
|
id(last_brightness_pct) = pct;
|
|
}
|
|
|
|
- id: ramp_off_script
|
|
mode: restart
|
|
then:
|
|
- lambda: |-
|
|
id(is_ramping) = true;
|
|
id(ramping_for_off) = true;
|
|
- script.stop: ramp_on_script
|
|
|
|
- light.turn_on:
|
|
id: bulb_light
|
|
color_temperature: "${bulb_warm_kelvin}"
|
|
brightness: !lambda "return id(min_brightness_pct) / 100.0f;"
|
|
transition_length: !lambda |-
|
|
const auto &cv = id(bulb_light).current_values;
|
|
const float floor = id(min_brightness_pct) / 100.0f;
|
|
float curr = cv.get_brightness();
|
|
if (curr < floor) curr = floor;
|
|
|
|
const float denom = (1.0f - floor);
|
|
if (denom <= 0.0005f) { id(last_ramp_ms) = 0; return (uint32_t) 0; }
|
|
|
|
float frac = (curr - floor) / denom;
|
|
if (frac < 0.0f) frac = 0.0f;
|
|
if (frac > 1.0f) frac = 1.0f;
|
|
|
|
id(last_ramp_ms) = (int) (id(ramp_down_ms) * frac);
|
|
return (uint32_t) id(last_ramp_ms);
|
|
|
|
- delay: !lambda "return (uint32_t) id(last_ramp_ms);"
|
|
- light.turn_off:
|
|
id: bulb_light
|
|
transition_length: 150ms
|
|
- delay: 150ms
|
|
|
|
- lambda: |-
|
|
id(is_ramping) = false;
|
|
id(ramping_for_off) = false;
|
|
id(last_brightness_pct) = 0.0f;
|
|
id(last_set_pos) = 0;
|
|
id(led_output_set_pct).publish_state(0);
|
|
|
|
- id: max_on_watchdog
|
|
mode: restart
|
|
then:
|
|
- if:
|
|
condition:
|
|
lambda: "return id(max_on_hours) > 0;"
|
|
then:
|
|
- delay: !lambda "return (uint32_t) (id(max_on_hours) * 3600000UL);"
|
|
- if:
|
|
condition:
|
|
lambda: "return id(bulb_light).current_values.is_on();"
|
|
then:
|
|
- lambda: |-
|
|
id(ramp_switch_target_on) = false;
|
|
id(bulb_ramp_switch).publish_state(false);
|
|
- script.stop: ramp_on_script
|
|
- script.execute: ramp_off_script
|
|
|
|
- id: deferred_restore_brightness
|
|
mode: restart
|
|
then:
|
|
- delay: 5s
|
|
- lambda: |-
|
|
float target = id(last_brightness_pct);
|
|
|
|
float minp = (float) id(min_brightness_pct);
|
|
float maxp = (float) id(max_brightness_pct);
|
|
if (target > 0.0f && target < minp) target = minp;
|
|
if (target > maxp) target = maxp;
|
|
|
|
id(restore_target_pct) = target;
|
|
|
|
- if:
|
|
condition:
|
|
lambda: "return id(restore_target_pct) > 0.5f;"
|
|
then:
|
|
- lambda: |-
|
|
id(ramp_switch_target_on) = true;
|
|
id(suppress_slider_sync) = true;
|
|
- script.stop: ramp_off_script
|
|
- script.execute: ramp_to_target_script
|
|
- delay: !lambda "return (uint32_t) id(last_ramp_ms);"
|
|
- lambda: "id(suppress_slider_sync) = false;"
|
|
else:
|
|
- lambda: "id(ramp_switch_target_on) = false;"
|
|
- light.turn_off:
|
|
id: bulb_light
|
|
transition_length: 0s
|
|
|
|
# Jump Fade: ON = jump to (jump% of max cap) then normal fade up to full
|
|
- id: jump_ramp_on_script
|
|
mode: restart
|
|
then:
|
|
- script.stop: ramp_off_script
|
|
|
|
- if:
|
|
condition:
|
|
lambda: |-
|
|
const auto &cv = id(bulb_light).current_values;
|
|
|
|
float maxp = (float) id(max_brightness_pct);
|
|
float minp = (float) id(min_brightness_pct);
|
|
if (maxp <= minp) maxp = minp + 1.0f;
|
|
|
|
float jp = (float) id(jump_fade_pct);
|
|
if (jp < 0.0f) jp = 0.0f;
|
|
if (jp > 100.0f) jp = 100.0f;
|
|
|
|
float target_pct = maxp * (jp / 100.0f);
|
|
if (jp > 0.0f && target_pct < minp) target_pct = minp;
|
|
if (target_pct > maxp) target_pct = maxp;
|
|
|
|
float curr_pct = cv.is_on() ? (cv.get_brightness() * 100.0f) : 0.0f;
|
|
|
|
return (!cv.is_on()) || (curr_pct + 0.1f < target_pct);
|
|
then:
|
|
- light.turn_on:
|
|
id: bulb_light
|
|
color_temperature: "${bulb_warm_kelvin}"
|
|
brightness: !lambda |-
|
|
float maxp = (float) id(max_brightness_pct);
|
|
float minp = (float) id(min_brightness_pct);
|
|
if (maxp <= minp) maxp = minp + 1.0f;
|
|
|
|
float jp = (float) id(jump_fade_pct);
|
|
if (jp < 0.0f) jp = 0.0f;
|
|
if (jp > 100.0f) jp = 100.0f;
|
|
|
|
float target_pct = maxp * (jp / 100.0f);
|
|
if (jp > 0.0f && target_pct < minp) target_pct = minp;
|
|
if (target_pct > maxp) target_pct = maxp;
|
|
|
|
return target_pct / 100.0f;
|
|
transition_length: 0s
|
|
|
|
- script.execute: ramp_on_script
|
|
|
|
# Jump Fade: OFF = jump down to (current - current*jump%) then normal fade down to OFF
|
|
- id: jump_ramp_off_script
|
|
mode: restart
|
|
then:
|
|
- script.stop: ramp_on_script
|
|
|
|
- if:
|
|
condition:
|
|
lambda: "return id(bulb_light).current_values.is_on();"
|
|
then:
|
|
- light.turn_on:
|
|
id: bulb_light
|
|
color_temperature: "${bulb_warm_kelvin}"
|
|
brightness: !lambda |-
|
|
const auto &cv = id(bulb_light).current_values;
|
|
float curr_pct = cv.get_brightness() * 100.0f;
|
|
|
|
float jp = (float) id(jump_fade_pct);
|
|
if (jp < 0.0f) jp = 0.0f;
|
|
if (jp > 100.0f) jp = 100.0f;
|
|
|
|
float factor = (100.0f - jp) / 100.0f;
|
|
float target_pct = curr_pct * factor;
|
|
|
|
float minp = (float) id(min_brightness_pct);
|
|
float maxp = (float) id(max_brightness_pct);
|
|
if (maxp <= minp) maxp = minp + 1.0f;
|
|
|
|
if (target_pct < minp) target_pct = minp;
|
|
if (target_pct > maxp) target_pct = maxp;
|
|
|
|
return target_pct / 100.0f;
|
|
transition_length: 0s
|
|
|
|
- script.execute: ramp_off_script
|
|
else:
|
|
- light.turn_off:
|
|
id: bulb_light
|
|
transition_length: 0s
|