zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
79597fb0216488142115ee1cf01145651199de53
zorruno-homeassistant/esphome/esp-loungesouthrightswitch.yaml
T
root f7bfa78835 more esphome devices and fixes
2026-04-03 21:34:23 +13:00

272 lines
10 KiB
YAML
Raw Blame History

#:########################################################################################:#
# TITLE: LOUNGE SOUTH RIGHT LIGHTSWITCH
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-loungesouthrightswitch.yaml
#:########################################################################################:#
# VERSIONS:
# V4.1 2026-03-11 Updated yaml to zorruno layout V1.1
# V4.0 2025-10-04 Copied from other device
#:########################################################################################:#
# HARDWARE:
# - Zemismart KS-811 Triple push button
# - ESP8266 based
# - pinout/schematic:
# https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
# - Relay 1 output on GPIO13
# - Relay 2 output on GPIO12
# - Relay 3 output on GPIO14
# - Button 1 input on GPIO16
# - Button 2 input on GPIO5
# - Button 3 input on GPIO4
# - Status LED on GPIO2
#:########################################################################################:#
# OPERATION NOTES:
# - Lounge South Right switch with 3 outputs:
# 1) Spare
# 2) Wall Washer Right
# 3) Breakfast Bar LEDs
# - Button 1 toggles Relay_1 locally
# - Button 2 toggles Relay_2 locally
# - Button 3 single click:
# - Offline and HA Loss manual override ON:
# - Toggles Relay_3 locally
# - Online:
# - No local action is taken
# - On API client connect:
# - Applies HA Loss manual override state to Relay_3
# - HA Loss manual override defaults ON and is restored after reboot
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant offline (network online):
# - API disconnects and device switches to manual/offline behavior
# - Button 1 and Button 2 continue to toggle relays locally
# - Button 3 can toggle Relay_3 locally when HA Loss manual override is ON
# b) MQTT offline (or HA/MQTT offline):
# - This yaml does not currently depend on MQTT for its switch logic
# - Local button control continues to work
# - Button 3 can toggle Relay_3 locally when HA Loss manual override is ON
# c) Entire WiFi/Network offline:
# - Device operates in local manual/offline behavior only
# - Local button control continues to work
# - Accurate time is not needed; SNTP is not required for operation
#:########################################################################################:#
#:########################################################################################:#
# SUBSTITUTIONS:
# Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
# Device Naming
device_name: "esp-loungesouthrightswitch"
friendly_name: "Lounge South Right Lightswitch (3)"
description_comment: "Lounge South Right Lightswitch using a Zemismart KS-811 Triple Push Button. Spare (1), Wall Washer Right (2), Breakfastbar LEDs (3) (Layout V1.1)"
device_area: "Lounge" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "Zemismart Technologies.KS-811 Triple" # Project Details
project_version: "v4.1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
# Passwords & Secrets
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
static_ip_address: !secret esp-loungesouthrightswitch_ip
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
# Don't forget to switch it back when changed.
current_ip_address: ${static_ip_address}
# Device Settings
#relay_icon: "mdi:lightbulb-group"
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for for general sensors etc
# MQTT LOCAL Controls
#mqtt_device_name: "bedroom2-lights"
#mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
#mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
# Switch Naming
switch_1_name: "Spare"
switch_2_name: "Wall Washer Right"
switch_3_name: "Breakfast Bar LEDs" # Connected to another esphome device at the breakfast bar LEDs
#:########################################################################################:#
# PACKAGES:
# Included Common Packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_current_ip_address: "${current_ip_address}"
local_ota_pass: "${ota_pass}"
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
common_api: !include
file: common/api_common.yaml
#file: common/api_common_noencryption.yaml
vars:
local_api_key: "${api_key}"
#### MQTT ####
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
#### WEB PORTAL ####
#common_webportal: !include common/webportal_common.yaml
#### SNTP (Only use if you want/need accurate timeclocks) ####
#common_sntp: !include common/sntp_common.yaml
#### DIAGNOSTICS Sensors ####
diag_basic: !include common/include_basic_diag_sensors.yaml
diag_more: !include common/include_more_diag_sensors.yaml
#diag_debug: !include common/include_debug_diag_sensors.yaml
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
#:########################################################################################:#
# ESPHOME:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}" # Appears on the esphome page in HA
area: "${device_area}"
project:
name: "${project_name}"
version: "${project_version}"
#:########################################################################################:#
# HOME ASSISTANT API:
#:########################################################################################:#
api:
on_client_connected:
then:
- logger.log:
level: INFO
format: "API connected: applying override (override=%s)"
args: ['id(ha_loss_override).state ? "true" : "false"']
- if:
condition:
switch.is_on: ha_loss_override
then:
- switch.turn_on: Relay_3
else:
- switch.turn_off: Relay_3
on_client_disconnected:
then:
- logger.log:
level: WARN
format: "API disconnected: switching to manual/offline behavior"
#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK:
# https://esphome.io/components/esp8266.html
#:########################################################################################:#
esp8266:
board: esp01_1m
early_pin_init: false # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
board_flash_mode: dout # Default is dout
#:########################################################################################:#
# LOGGER:
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
#esp8266_store_log_strings_in_flash: false
#tx_buffer_size: 64
#:########################################################################################:#
# STATUS LED:
# https://esphome.io/components/status_led.html
#:########################################################################################:#
status_led:
pin:
number: GPIO2
inverted: true
#:########################################################################################:#
# BINARY SENSORS:
# https://esphome.io/components/binary_sensor/
#:########################################################################################:#
binary_sensor:
- platform: gpio
pin:
number: GPIO16
mode: INPUT
inverted: true
use_interrupt: false # GPIO16 pin doesn't support interrupts so use polling. Only suppresses a warning.
name: "Button 1: ${switch_1_name}"
on_press:
- switch.toggle: Relay_1
- platform: gpio
pin:
number: GPIO5
mode: INPUT
inverted: true
name: "Button 2: ${switch_2_name}"
on_press:
- switch.toggle: Relay_2
- platform: gpio
pin:
number: GPIO4
mode: INPUT
inverted: true
name: "Button 3: ${switch_3_name}"
on_multi_click:
- timing:
- ON for at most 0.5s
- OFF for at least 0.5s
then:
- if:
condition:
and:
- not:
api.connected:
- switch.is_on: ha_loss_override
then:
- switch.toggle: Relay_3
else: []
#:########################################################################################:#
# SWITCH COMPONENT:
# https://esphome.io/components/switch/
#:########################################################################################:#
switch:
- platform: gpio
name: "Relay 1: ${switch_1_name}"
pin: GPIO13
id: Relay_1
- platform: gpio
name: "Relay 2: ${switch_2_name}"
pin: GPIO12
id: Relay_2
- platform: gpio
name: "Relay 3: ${switch_3_name}"
pin: GPIO14
id: Relay_3
restore_mode: RESTORE_DEFAULT_ON
# HA Loss manual override (default ON; persists across restarts)
- platform: template
name: "HA Loss manual override"
id: ha_loss_override
optimistic: true
restore_mode: RESTORE_DEFAULT_ON
Reference in New Issue View Git Blame Copy Permalink