zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
892c7c4577631bde4871a22641136d3764467629
zorruno-homeassistant/esphome/esp-breakfastbarleds.yaml
T
root a8d2927274 yaml layout updates to v1.x
2026-02-25 21:05:21 +13:00

984 lines
38 KiB
YAML
Raw Blame History

#:########################################################################################:#
# TITLE: BREAKFAST BAR LEDS (LOUNGE)
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-breakfastbarleds.yaml
#:########################################################################################:#
# VERSIONS:
# V2.0 2025-09-15 A bunch of fixes and made it more standard across my devices
# V1.0 2025-08-17 First setup (and replacement of Tasmota)
#:########################################################################################:#
# HARDWARE:
# Magishome LED controller single channel (ESP8266, NOT the later ones with BL602)
# https://devices.esphome.io/devices/MagicHome-ZJ-WFMN-C-Single-Color
#
# DEVICE GPIO (Magichome ESP8266)
# - GPIO02 Blue LED (used for ESPHome status) - I think... can't see the board
# - GPIO12 MOSFET output (0 V when switched)
#:########################################################################################:#
# OPERATION NOTES:
# 1. General-purpose LED controller.
# 2. Designed for the Sinilink XY-WFMS board with a MOSFET output (claimed 5A, 5-36 V DC), but will suit similar mosfet boards.
# 3. (SUBSTITUTIONS) setting for MAX % output to extend LED life (e.g. ensure it is only ever 95%)
# 4. (SUBSTITUTIONS) Minimum output setting; switches fully OFF at/below the minimum to avoid low-PWM flicker.
# 5. (SUBSTITUTIONS) PWM frequency is set to 1kHz by default. You can increase it, but higher values caused
# resets on Sinilink device. On ESP32 you can run much higher (~40 kHz).
# 6. Min/Max output settings are not exposed in Home Assistant/MQTT by default, but could be.
# With a 1 MB flash, space is tight and only minimal optimisation has been done so far.
# 7. (PACKAGES) include common items: network settings, diagnostic entities, MQTT, and SNTP (optional).
# 8. Default behaviours, for recovery from lost power or reset:
# - "Fade up to full": fade from floor to max on boot.
# - "Restore Brightness": fade from floor to the last brightness on boot (should be no on/off blip/flash).
# - "Remain Off": stays off on boot.
# 9. The green LED flashes while fading (different patterns for up/down). The red LED follows the
# output (it shares the MOSFET GPIO). (Obviously this depends on hardware)
# 10. Fade timing scales with the configured values (proportionally when starting mid-brightness).
# 11. Exposed in Home Assistant/MQTT:
# - Startup action (On,Off,Restore)
# - Fade Up / Fade Down / Fade Stop buttons
# - Fade Up/Down toggle switch (keeps fading up to full, or down to off unless stopped)
# - Normal On/Off switch (quick ramp up/down, up to the level of previous brightness)
# - Fade up/down times (0-60s)
# - Output % (pre-gamma) and PWM % (post-gamma)
# - Output Set (1-100, respects min/max). This also changes with other output so reflects value.
# - Many device diagnostics (from the included 'diagnostics' package)
# - Maximum 'on' time before automatic fade-down (1-48 h, 0 = no limit)
#:########################################################################################:#
# MQTT COMMANDS:
# Local MQTT light control:
# - ${mqtt_local_command_topic}/light/set -> ON,OFF
#
# Local MQTT light status:
# - ${mqtt_local_status_topic}/light/state -> ON,OFF
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant OFFLINE, but Network and MQTT ONLINE
# - Device remains controllable via MQTT local command topics
# - Status publishes to MQTT still occur (light state)
# - HA entities are unavailable until HA returns
# b) MQTT OFFLINE (but WiFi/Network and HA API ONLINE)
# - Device remains controllable from Home Assistant via API (light/switch/buttons/select/numbers)
# - MQTT local commands will not work and status publishes will fail while MQTT is down
# c) Entire WiFi/Network OFFLINE
# - No HA API and no MQTT control available
# - SNTP not needed (no timeclocks; loss of network does not affect timing)
# - If power remains on, the controller continues running at the last state (including any running scripts)
# - If the device reboots while offline, restart behavior depends on the stored restart_mode and restore globals
#:########################################################################################:#
#:########################################################################################:#
# SUBSTITUTIONS: Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
# Device Naming
device_name: "esp-breakfastbarleds" # yaml file should be device_name.yaml
friendly_name: "Breakfast Bar LEDs"
description_comment: "LED Strip under the breakfast bar, upstairs lounge :: Magichome ESP8266 (Layout V1.1)"
device_area: "Lounge" # Allows the ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "Magichome Single Colour V1.1 LED Controller.Generic ESP8266" # Manufacturer before the dot, device after the dot.
project_version: "v2.0" # Project version denotes release of the YAML file, allowing checking of deployed vs latest version
# Passwords & Secrets (Unfortunately, you can't use substitutions inside secret names)
api_key: !secret esp-api_key
ota_pass: !secret esp-ota_pass
static_ip_address: !secret esp-breakfastbarleds_ip
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
# Don't forget to switch it back when changed.
current_ip_address: ${static_ip_address}
# MQTT LOCAL Controls (This is just my local method of controlling via MQTT, I also use the built in method)
mqtt_local_device_name: "lounge-breakfastbarleds"
mqtt_local_command_main_topic: !secret mqtt_command_main_topic
mqtt_local_status_main_topic: !secret mqtt_status_main_topic
mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_local_device_name}" # Topic we will use to command this locally without HA
mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_local_device_name}" # Topic we will use to view status locally without HA
mqtt_local_device_command_ON: "ON"
mqtt_local_device_command_OFF: "OFF"
# Device Specific Settings
log_level: "NONE" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (default), VERBOSE, VERY_VERBOSE
update_interval: "20s" # Update time for general sensors, etc.
led_gamma: "1.2" # Gamma from 1.2-3 is sensible to normalise the LED fading vs PWM
minimum_led_output: "1" # % If at this value or below, we'll switch it completely off
maximum_led_output: "90" # % Maximum output; it is sometimes nice to limit the output for longevity or aesthetics
max_on_default_hours: "24" # The maximum time the LEDs will be on, in case they get left on. 0 = no automatic turn-off
pwm_frequency: "1000" # PWM output Frequency in Hz. High enough to avoid audible/visible artifacts
# Device Specific GPIO (so we can easily update for other devices)
device_status_led: GPIO02
device_mosfet_out: GPIO12
device_usr_button: GPIO04 # if no button, this is just a fake/safeish choice so it compiles with the generic yaml
device_fading_led: GPIO13 # if no LED, this is just a fake/safeish choice so it compiles with the generic yaml
#:########################################################################################:#
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
local_current_ip_address: "${current_ip_address}"
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
common_api: !include
#file: common/api_common.yaml
file: common/api_common_noencryption.yaml
vars:
local_api_key: "${api_key}"
#### MQTT ####
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
#### WEB PORTAL ####
#common_webportal: !include common/webportal_common.yaml
#### SNTP (Only use if you want/need accurate timeclocks) ####
#common_sntp: !include common/sntp_common.yaml
#### DIAGNOSTICS Sensors ####
diag_basic: !include common/include_basic_diag_sensors.yaml
diag_more: !include common/include_more_diag_sensors.yaml
#diag_debug: !include common/include_debug_diag_sensors.yaml
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
#:########################################################################################:#
# ESPHOME:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}"
area: "${device_area}"
on_boot:
# Run later so everything is initialised before we touch states.
priority: 200
then:
# Keep the HA dropdown in sync with the stored mode
- lambda: |-
switch (id(restart_mode)) {
case 0: id(restart_action).publish_state("Fade up to full"); break;
case 1: id(restart_action).publish_state("Restore Brightness"); break;
case 2: default: id(restart_action).publish_state("Remain Off"); break;
}
# Mode 0: Fade up to full (obeys fade settings; no on/off flicker)
- if:
condition:
lambda: 'return id(restart_mode) == 0;'
then:
- lambda: 'id(ramp_switch_target_on) = true;'
- script.execute: ramp_on_script
# Mode 1: Restore Brightness (deferred to avoid races)
- if:
condition:
lambda: 'return id(restart_mode) == 1;'
then:
- script.execute: deferred_restore_brightness
# Mode 2: Remain Off (no blip; stays off)
- if:
condition:
lambda: 'return id(restart_mode) == 2;'
then:
- script.stop: ramp_on_script
- script.stop: ramp_off_script
- lambda: 'id(ramp_switch_target_on) = false;'
- light.turn_off:
id: mosfet_leds
transition_length: 0s
# Boot complete: allow OFF handlers again
- lambda: 'id(booting) = false;'
#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK:
# https://esphome.io/components/esp8266.html
# https://esphome.io/components/esp32.html
#:########################################################################################:#
esp8266:
board: esp01_1m
restore_from_flash: true # restore some values on reboot
mdns:
disabled: true # Disabling will make the build file smaller (and device is still available via static IP)
preferences:
flash_write_interval: 2min # enough time to update values for reboots, but not enough to wear flash
#:########################################################################################:#
# GLOBAL VARIABLES:
# https://esphome.io/components/globals.html
#:########################################################################################:#
globals:
# Minimum Brightness % for LEDs (will switch off if <=)
- id: min_brightness_pct
type: int
restore_value: true
initial_value: "${minimum_led_output}"
# Maximum Brightness % for LEDs (should never go beyond this)
- id: max_brightness_pct
type: int
restore_value: false
initial_value: "${maximum_led_output}"
# The maximum time the lights will stay on, in hours. 0 = forever
- id: max_on_hours
type: int
restore_value: true
initial_value: "${max_on_default_hours}"
# Compile time Gamma
- id: led_gamma_f
type: float
restore_value: false
initial_value: ${led_gamma} # numeric at compile time
# Default Fading Up Time (Selectable and will be retained)
- id: ramp_up_ms
type: int
restore_value: true
initial_value: "5000" # 5 s
# Default Fading Down Time (Selectable and will be retained)
- id: ramp_down_ms
type: int
restore_value: true
initial_value: "10000" # 10 s
# Action on Restart. (0=Fade full, 1=Restore brightness, 2=Remain off)
- id: restart_mode
type: int
restore_value: true
initial_value: "0" # default = Fade Up to Full
# Determine last fade direction.
- id: ramp_switch_target_on
type: bool
restore_value: true
initial_value: "false"
# Prevent jitter when adjusting the slider
- id: suppress_slider_sync
type: bool
restore_value: false
initial_value: "false"
# Actual 0..100 seen last time, for restart
- id: last_brightness_pct
type: float
restore_value: true
initial_value: "0.0"
# Last published "Output Set (0-100)" integer
- id: last_set_pos
type: int
restore_value: false
initial_value: "-1"
# Helper to keep blink time == transition time
- id: last_ramp_ms
type: int
restore_value: false
initial_value: "0"
# Target for "Restore Brightness" scripted ramp
- id: restore_target_pct
type: float
restore_value: false
initial_value: "0.0"
# True while a scripted ramp is in progress (to limit flash writes)
- id: is_ramping
type: bool
restore_value: false
initial_value: "false"
# Guards OFF persistence during startup caused by restore_mode: RESTORE_DEFAULT_OFF
- id: booting
type: bool
restore_value: false
initial_value: "true"
# True only while we are performing a ramp-down that briefly turns the light ON to hit the floor
- id: ramping_for_off
type: bool
restore_value: false
initial_value: "false"
#:########################################################################################:#
# LOGGER COMPONENT:
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
level: "${log_level}"
baud_rate: 0 # set to 0 for no logging via UART
#:########################################################################################:#
# STATUS LED:
# https://esphome.io/components/status_led.html
#:########################################################################################:#
status_led:
pin:
number: ${device_status_led}
inverted: true
#:########################################################################################:#
# MQTT:
# This adds device-specific MQTT command triggers to the common MQTT configuration.
#:########################################################################################:#
mqtt:
on_message:
# Light control to ramp up
- topic: "${mqtt_local_command_topic}/light/set"
payload: "${mqtt_local_device_command_ON}"
then:
- switch.turn_on: mosfet_ramp_switch
# Light control to ramp down
- topic: "${mqtt_local_command_topic}/light/set"
payload: "${mqtt_local_device_command_OFF}"
then:
- switch.turn_off: mosfet_ramp_switch
#:########################################################################################:#
# SWITCH COMPONENT:
# https://esphome.io/components/switch/
#:########################################################################################:#
switch:
# Ramp-aware ON/OFF for HA (asymmetric, eased; no bounce)
- platform: template
id: mosfet_ramp_switch
name: "${friendly_name} Fade Up-Down"
icon: mdi:led-strip-variant
lambda: |-
return id(ramp_switch_target_on);
turn_on_action:
- lambda: |-
id(ramp_switch_target_on) = true;
- script.stop: ramp_off_script
- script.execute: ramp_on_script
turn_off_action:
- lambda: |-
id(ramp_switch_target_on) = false;
- script.stop: ramp_on_script
- script.execute: ramp_off_script
#:########################################################################################:#
# BUTTON COMPONENT:
# https://esphome.io/components/button/index.html
#:########################################################################################:#
button:
# Start ramping UP (from current level)
- platform: template
id: fade_up_button
name: "${friendly_name} Fade Up"
icon: mdi:arrow-up-bold
on_press:
- lambda: |-
id(ramp_switch_target_on) = true;
id(mosfet_ramp_switch).publish_state(true); // reflect in HA immediately
- script.stop: ramp_off_script
- script.execute: ramp_on_script
# Start ramping DOWN (from current level)
- platform: template
id: fade_down_button
name: "${friendly_name} Fade Down"
icon: mdi:arrow-down-bold
on_press:
- lambda: |-
id(ramp_switch_target_on) = false;
id(mosfet_ramp_switch).publish_state(false); // reflect in HA immediately
- script.stop: ramp_on_script
- script.execute: ramp_off_script
# STOP any ramping (hold current brightness)
- platform: template
id: fade_stop_button
name: "${friendly_name} Fade Stop"
icon: mdi:pause
on_press:
- script.stop: ramp_on_script
- script.stop: ramp_off_script
- lambda: |-
// We are no longer ramping (up or down)
id(ramping_for_off) = false;
id(is_ramping) = false;
// Freeze the light at its current level by overwriting the transition
const auto &cv = id(mosfet_leds).current_values;
if (cv.is_on()) {
auto call = id(mosfet_leds).make_call();
call.set_state(true);
call.set_brightness(cv.get_brightness());
call.set_transition_length(0);
call.perform();
}
// Persist the exact frozen level so restore survives a reboot
if (cv.is_on()) {
float pct = cv.get_brightness() * 100.0f;
id(last_brightness_pct) = pct;
}
#:########################################################################################:#
# SELECT COMPONENT:
# https://esphome.io/components/select/index.html
#:########################################################################################:#
select:
- platform: template
id: restart_action
name: "${friendly_name} Restart Action"
icon: mdi:restart
optimistic: true
options:
- "Fade up to full"
- "Restore Brightness"
- "Remain Off"
initial_option: "Restore Brightness"
set_action:
- lambda: |-
if (x == "Fade up to full") {
id(restart_mode) = 0;
} else if (x == "Restore Brightness") {
id(restart_mode) = 1;
} else {
id(restart_mode) = 2;
}
#:########################################################################################:#
# BINARY SENSORS:
# https://esphome.io/components/binary_sensor/
#:########################################################################################:#
binary_sensor:
- platform: gpio
id: btn_gpio12
name: "${friendly_name} Button"
pin:
number: ${device_usr_button}
mode:
input: true
pullup: true
inverted: true
filters:
- delayed_on: 30ms
- delayed_off: 30ms
on_press:
- if:
condition:
lambda: 'return id(ramp_switch_target_on);'
then:
# Target is currently ON -> press should go OFF (start ramp-down)
- lambda: |-
id(ramp_switch_target_on) = false;
id(mosfet_ramp_switch).publish_state(false); // reflect in HA immediately
- script.stop: ramp_on_script
- script.execute: ramp_off_script
else:
# Target is currently OFF -> press should go ON (start ramp-up)
- lambda: |-
id(ramp_switch_target_on) = true;
id(mosfet_ramp_switch).publish_state(true); // reflect in HA immediately
- script.stop: ramp_off_script
- script.execute: ramp_on_script
#:########################################################################################:#
# SENSOR COMPONENT:
# https://esphome.io/components/sensor/
#:########################################################################################:#
sensor:
- platform: template
id: mosfet_output_pct
name: "${friendly_name} Output (%)"
unit_of_measurement: "%"
icon: mdi:percent
accuracy_decimals: 0
update_interval: 2s
lambda: |-
const auto &cv = id(mosfet_leds).current_values;
return cv.is_on() ? (float) (int)(cv.get_brightness() * 100.0f + 0.5f) : 0.0f;
on_value:
then:
- lambda: |-
// If not suppressing sync, update the 0..100 slider only when its INT changes
if (!id(suppress_slider_sync)) {
float actual = x; // x is current Output (%)
float minp = (float) id(min_brightness_pct);
float maxp = (float) id(max_brightness_pct);
if (maxp <= minp) maxp = minp + 1.0f;
float pos = (actual <= 0.0f) ? 0.0f : ((actual - minp) * 100.0f / (maxp - minp));
if (pos < 0.0f) pos = 0.0f;
if (pos > 100.0f) pos = 100.0f;
int pos_i = (int) floorf(pos + 0.5f);
if (pos_i != id(last_set_pos)) {
id(last_set_pos) = pos_i;
id(led_output_set_pct).publish_state(pos_i);
}
}
- platform: template
id: mosfet_output_pwm_pct
name: "${friendly_name} Output PWM (%)"
unit_of_measurement: "%"
icon: mdi:square-wave
accuracy_decimals: 1
update_interval: 2s
lambda: |-
const auto &cv = id(mosfet_leds).current_values;
if (!cv.is_on()) return 0.0f;
const float lin = cv.get_brightness();
float pwm = powf(lin, id(led_gamma_f));
if (pwm < 0.0f) pwm = 0.0f;
if (pwm > 1.0f) pwm = 1.0f;
return pwm * 100.0f;
#:########################################################################################:#
# OUTPUT COMPONENT:
# https://esphome.io/components/output/
#:########################################################################################:#
output:
- platform: esp8266_pwm
id: mosfet_pwm
pin: ${device_mosfet_out}
frequency: ${pwm_frequency}
- platform: gpio
id: green_led_out # Green LED
pin:
number: ${device_fading_led}
inverted: false
#:########################################################################################:#
# LIGHT COMPONENT:
# https://esphome.io/components/light/
#:########################################################################################:#
light:
- platform: monochromatic
id: mosfet_leds
name: "${friendly_name}"
output: mosfet_pwm
restore_mode: RESTORE_DEFAULT_OFF
default_transition_length: 2s
icon: mdi:led-strip-variant
gamma_correct: "${led_gamma}"
# ON: publish state, track intent, arm watchdog if configured
on_turn_on:
- output.turn_on: green_led_out
- mqtt.publish:
topic: "${mqtt_local_status_topic}/light/state"
payload: "${mqtt_local_device_command_ON}"
retain: true
- lambda: |-
// Do not flip "intent to ON" when we're inside an OFF ramp's floor-kick
if (!id(ramping_for_off)) {
id(ramp_switch_target_on) = true;
}
- script.stop: max_on_watchdog
- if:
condition:
lambda: 'return id(max_on_hours) > 0;'
then:
- script.execute: max_on_watchdog
# OFF: publish state, track intent, clear watchdog, and persist OFF so Mode 1 will not restore
# Guarded by booting flag so the automatic OFF at boot from RESTORE_DEFAULT_OFF does not zero persistence.
on_turn_off:
- output.turn_off: green_led_out
- if:
condition:
lambda: 'return !id(booting);'
then:
- mqtt.publish:
topic: "${mqtt_local_status_topic}/light/state"
payload: "${mqtt_local_device_command_OFF}"
retain: true
- lambda: 'id(ramp_switch_target_on) = false;'
- script.stop: max_on_watchdog
- lambda: |-
id(last_brightness_pct) = 0.0f;
id(last_set_pos) = 0;
id(led_output_set_pct).publish_state(0);
# Cap brightness to max_brightness_pct without a visible step
on_state:
- lambda: |-
const float cap = id(max_brightness_pct) / 100.0f;
const auto &cv = id(mosfet_leds).current_values;
if (!cv.is_on()) return;
const float b = cv.get_brightness();
if (b <= cap + 0.001f) return;
auto call = id(mosfet_leds).make_call();
call.set_state(true);
call.set_brightness(cap);
call.set_transition_length(0);
call.perform();
#:########################################################################################:#
# NUMBER COMPONENT:
# https://esphome.io/components/number/
#:########################################################################################:#
number:
- platform: template
id: cfg_ramp_up_s
name: "${friendly_name} Fade Up Time (s)"
entity_category: config
unit_of_measurement: s
icon: mdi:timer-sand
mode: slider
min_value: 0
max_value: 60
step: 1
lambda: |-
return (float) id(ramp_up_ms) / 1000.0f;
set_action:
- lambda: |-
int secs = (int) floorf(x + 0.5f);
if (secs < 0) secs = 0;
if (secs > 60) secs = 60;
id(ramp_up_ms) = secs * 1000;
id(cfg_ramp_up_s).publish_state((float) secs);
- platform: template
id: cfg_ramp_down_s
name: "${friendly_name} Fade Down Time (s)"
entity_category: config
unit_of_measurement: s
icon: mdi:timer-sand-complete
mode: slider
min_value: 0
max_value: 60
step: 1
lambda: |-
return (float) id(ramp_down_ms) / 1000.0f;
set_action:
- lambda: |-
int secs = (int) floorf(x + 0.5f);
if (secs < 0) secs = 0;
if (secs > 60) secs = 60;
id(ramp_down_ms) = secs * 1000;
id(cfg_ramp_down_s).publish_state((float) secs);
- platform: template
id: led_output_set_pct
name: "${friendly_name} Output Set (0-100)"
icon: mdi:tune
mode: slider
min_value: 0
max_value: 100
step: 1
lambda: |-
const auto &cv = id(mosfet_leds).current_values;
float actual = cv.is_on() ? (cv.get_brightness() * 100.0f) : 0.0f;
float minp = (float) id(min_brightness_pct);
float maxp = (float) id(max_brightness_pct);
if (maxp <= minp) maxp = minp + 1.0f;
if (actual <= 0.0f) return 0.0f;
float pos = (actual - minp) * 100.0f / (maxp - minp);
if (pos < 0.0f) pos = 0.0f;
if (pos > 100.0f) pos = 100.0f;
return floorf(pos + 0.5f);
set_action:
- if:
condition:
lambda: 'return x <= 0.0f;'
then:
- lambda: 'id(suppress_slider_sync) = true;'
- script.stop: ramp_on_script
- script.stop: ramp_off_script
- light.turn_off:
id: mosfet_leds
transition_length: 200ms
- lambda: |-
id(ramp_switch_target_on) = false;
id(led_output_set_pct).publish_state(0);
id(last_brightness_pct) = 0.0f;
id(last_set_pos) = 0;
- delay: 400ms
- lambda: 'id(suppress_slider_sync) = false;'
else:
- lambda: |-
id(suppress_slider_sync) = true;
float pos = x;
if (pos < 1.0f) pos = 1.0f;
if (pos > 100.0f) pos = 100.0f;
id(led_output_set_pct).publish_state((int) floorf(pos + 0.5f));
- script.stop: ramp_off_script
- script.stop: ramp_on_script
- light.turn_on:
id: mosfet_leds
brightness: !lambda |-
float pos = id(led_output_set_pct).state;
float minp = (float) id(min_brightness_pct);
float maxp = (float) id(max_brightness_pct);
if (maxp <= minp) maxp = minp + 1.0f;
float out_pct = minp + (pos * (maxp - minp) / 100.0f);
if (out_pct > maxp) out_pct = maxp;
return out_pct / 100.0f;
transition_length: 250ms
- lambda: |-
id(ramp_switch_target_on) = true;
float pos = id(led_output_set_pct).state;
float minp = (float) id(min_brightness_pct);
float maxp = (float) id(max_brightness_pct);
if (maxp <= minp) maxp = minp + 1.0f;
float out_pct = minp + (pos * (maxp - minp) / 100.0f);
if (out_pct > maxp) out_pct = maxp;
id(last_brightness_pct) = out_pct;
- delay: 400ms
- lambda: 'id(suppress_slider_sync) = false;'
- platform: template
id: cfg_max_on_hours
name: "${friendly_name} Max On (h)"
entity_category: config
unit_of_measurement: h
icon: mdi:timer-cog
mode: slider
min_value: 0
max_value: 48
step: 1
lambda: |-
return (float) id(max_on_hours);
set_action:
- lambda: |-
int hrs = (int) x;
if (hrs < 0) hrs = 0;
if (hrs > 48) hrs = 48;
id(max_on_hours) = hrs;
id(cfg_max_on_hours).publish_state((float) hrs);
- if:
condition:
lambda: 'return id(mosfet_leds).current_values.is_on();'
then:
- script.stop: max_on_watchdog
- if:
condition:
lambda: 'return id(max_on_hours) > 0;'
then:
- script.execute: max_on_watchdog
#:########################################################################################:#
# SCRIPT COMPONENT:
# https://esphome.io/components/script.html
#:########################################################################################:#
script:
# Script: ramp up from current level. Obey global max.
- id: ramp_on_script
mode: restart
then:
- lambda: 'id(is_ramping) = true;'
- script.stop: ramp_off_script
# Ensure we start at at least the floor without a visible "pop".
- if:
condition:
lambda: |-
const auto &cv = id(mosfet_leds).current_values;
const float floor = id(min_brightness_pct) / 100.0f;
return (!cv.is_on()) || (cv.get_brightness() + 0.0005f < floor);
then:
- light.turn_on:
id: mosfet_leds
brightness: !lambda 'return id(min_brightness_pct) / 100.0f;'
transition_length: 80ms
# Ramp from current (>= floor) to cap over a fraction of ramp_up_ms.
- light.turn_on:
id: mosfet_leds
brightness: !lambda 'return id(max_brightness_pct) / 100.0f;'
transition_length: !lambda |-
const auto &cv = id(mosfet_leds).current_values;
const float floor = id(min_brightness_pct) / 100.0f;
const float cap = id(max_brightness_pct) / 100.0f;
if (cap <= floor + 0.0005f) { id(last_ramp_ms) = 0; return (uint32_t) 0; }
float curr = cv.is_on() ? cv.get_brightness() : 0.0f;
if (curr + 0.0005f < floor) {
id(last_ramp_ms) = id(ramp_up_ms);
return (uint32_t) id(last_ramp_ms);
}
if (curr > cap) curr = cap;
if (curr < floor) curr = floor;
float frac = (cap - curr) / (cap - floor);
if (frac < 0.0f) frac = 0.0f;
if (frac > 1.0f) frac = 1.0f;
id(last_ramp_ms) = (int) (id(ramp_up_ms) * frac);
return (uint32_t) id(last_ramp_ms);
- delay: !lambda 'return (uint32_t) id(last_ramp_ms);'
- lambda: |-
id(is_ramping) = false;
const auto &cv = id(mosfet_leds).current_values;
if (cv.is_on()) {
float pct = cv.get_brightness() * 100.0f;
id(last_brightness_pct) = pct;
}
# Script: ramp to a specific target (Restore Brightness path).
- id: ramp_to_target_script
mode: restart
then:
- lambda: 'id(is_ramping) = true;'
- script.stop: ramp_off_script
# Ensure we start at the floor cleanly.
- if:
condition:
lambda: |-
const auto &cv = id(mosfet_leds).current_values;
const float floor = id(min_brightness_pct) / 100.0f;
return (!cv.is_on()) || (cv.get_brightness() + 0.0005f < floor);
then:
- light.turn_on:
id: mosfet_leds
brightness: !lambda 'return id(min_brightness_pct) / 100.0f;'
transition_length: 80ms
# Ramp from current (>= floor) to restore_target_pct over a fraction of ramp_up_ms.
- light.turn_on:
id: mosfet_leds
brightness: !lambda |-
float cap_pct = id(restore_target_pct);
float maxp = (float) id(max_brightness_pct);
if (cap_pct > maxp) cap_pct = maxp;
return cap_pct / 100.0f;
transition_length: !lambda |-
const auto &cv = id(mosfet_leds).current_values;
const float floor = id(min_brightness_pct) / 100.0f;
float cap = id(restore_target_pct) / 100.0f;
const float maxp = id(max_brightness_pct) / 100.0f;
if (cap > maxp) cap = maxp;
if (cap <= floor + 0.0005f) { id(last_ramp_ms) = 0; return (uint32_t) 0; }
float curr = cv.is_on() ? cv.get_brightness() : 0.0f;
if (curr + 0.0005f < floor) {
id(last_ramp_ms) = id(ramp_up_ms);
return (uint32_t) id(last_ramp_ms);
}
if (curr > cap) curr = cap;
if (curr < floor) curr = floor;
float frac = (cap - curr) / (cap - floor);
if (frac < 0.0f) frac = 0.0f;
if (frac > 1.0f) frac = 1.0f;
id(last_ramp_ms) = (int) (id(ramp_up_ms) * frac);
return (uint32_t) id(last_ramp_ms);
- delay: !lambda 'return (uint32_t) id(last_ramp_ms);'
- lambda: |-
id(is_ramping) = false;
const auto &cv = id(mosfet_leds).current_values;
if (cv.is_on()) {
float pct = cv.get_brightness() * 100.0f;
id(last_brightness_pct) = pct;
}
# Script: ramp down from current level to floor, then cleanly cut to OFF.
- id: ramp_off_script
mode: restart
then:
- lambda: |-
id(is_ramping) = true;
id(ramping_for_off) = true;
- script.stop: ramp_on_script
- light.turn_on:
id: mosfet_leds
brightness: !lambda 'return id(min_brightness_pct) / 100.0f;'
transition_length: !lambda |-
const auto &cv = id(mosfet_leds).current_values;
const float floor = id(min_brightness_pct) / 100.0f;
float curr = cv.get_brightness();
if (curr < floor) curr = floor;
const float denom = (1.0f - floor);
if (denom <= 0.0005f) { id(last_ramp_ms) = 0; return (uint32_t) 0; }
float frac = (curr - floor) / denom;
if (frac < 0.0f) frac = 0.0f;
if (frac > 1.0f) frac = 1.0f;
id(last_ramp_ms) = (int) (id(ramp_down_ms) * frac);
return (uint32_t) id(last_ramp_ms);
- delay: !lambda 'return (uint32_t) id(last_ramp_ms);'
- light.turn_off:
id: mosfet_leds
transition_length: 150ms
- delay: 150ms
- lambda: |-
id(is_ramping) = false;
id(ramping_for_off) = false;
id(last_brightness_pct) = 0.0f;
id(last_set_pos) = 0;
id(led_output_set_pct).publish_state(0);
- id: max_on_watchdog
mode: restart
then:
- if:
condition:
lambda: 'return id(max_on_hours) > 0;'
then:
- delay: !lambda 'return (uint32_t) (id(max_on_hours) * 3600000UL);'
- if:
condition:
lambda: 'return id(mosfet_leds).current_values.is_on();'
then:
- lambda: |-
id(ramp_switch_target_on) = false;
id(mosfet_ramp_switch).publish_state(false);
- script.stop: ramp_on_script
- script.execute: ramp_off_script
# Deferred restore to avoid early-boot races and ensure we apply the last saved level
- id: deferred_restore_brightness
mode: restart
then:
- delay: 5s # let preferences/globals load and light settle
- lambda: |-
// Use ONLY the exact last saved brightness.
float target = id(last_brightness_pct);
// Clamp into [min..max] only if we are restoring a non-zero target
float minp = (float) id(min_brightness_pct);
float maxp = (float) id(max_brightness_pct);
if (target > 0.0f && target < minp) target = minp;
if (target > maxp) target = maxp;
id(restore_target_pct) = target;
- if:
condition:
lambda: 'return id(restore_target_pct) > 0.5f;'
then:
- lambda: |-
id(ramp_switch_target_on) = true;
id(suppress_slider_sync) = true;
- script.stop: ramp_off_script
- script.execute: ramp_to_target_script
- delay: !lambda 'return (uint32_t) id(last_ramp_ms);'
- lambda: 'id(suppress_slider_sync) = false;'
else:
# Exact last was 0 -> remain OFF
- lambda: 'id(ramp_switch_target_on) = false;'
- light.turn_off:
id: mosfet_leds
transition_length: 0s
Reference in New Issue View Git Blame Copy Permalink