zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
90e1222a2f09cda93ed2da04de4fde848839fdd5
zorruno-homeassistant/esphome/esp-loungemiddleswitch.yaml.old
T
root 7eb81efd93 additional esphome devices and fixes
2026-05-23 23:53:04 +12:00

507 lines
20 KiB
Plaintext
Raw Blame History

#:########################################################################################:#
# TITLE: LOUNGE MIDDLE LIGHTSWITCH
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-loungemiddleswitch.yaml
#:########################################################################################:#
# VERSIONS:
# V3.6 2026-03-11 Updated yaml to zorruno layout V1.1
# V3.5 2025-07-28 YAML tidyups
#:########################################################################################:#
# HARDWARE:
# - Zemismart KS-811 Triple push button
# - ESP8266 based
# - pinout/schematic:
# https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
# - Relay 1 output on GPIO13
# - Relay 2 output on GPIO12
# - Relay 3 output on GPIO14
# - Button 1 input on GPIO16
# - Button 2 input on GPIO5
# - Button 3 input on GPIO4
# - Status LED on GPIO2
#:########################################################################################:#
# OPERATION NOTES:
# - Button 1:
# - Online with HA Loss manual override ON and HA Loss Test OFF:
# - Uses Home Assistant last-scene logic
# - If last scene is not "All Off", set "All Off"
# - If last scene is "All Off", set "Bright"
# - Offline/test with HA Loss manual override ON:
# - Toggles Relay_1 locally
# - Button 2:
# - Online with HA Loss manual override ON and HA Loss Test OFF:
# - Sets Home Assistant scene "Movie"
# - Offline/test with HA Loss manual override ON:
# - Toggles Relay_2 locally
# - Button 3:
# - Online with HA Loss manual override ON and HA Loss Test OFF:
# - Sets Home Assistant scene "Reading On/Off"
# - Offline/test with HA Loss manual override ON:
# - Toggles Relay_3 locally
# - On API connect:
# - If HA Loss Test is OFF, Relay_1 and Relay_2 follow HA Loss manual override state
# - If HA Loss Test is ON, relay override is not applied
# - HA Loss manual override defaults ON and persists across restarts
# - HA Loss Test defaults OFF and can force offline/test behaviour even when HA is connected
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant offline (network online):
# - Device switches to manual/offline behaviour
# - Buttons still operate local relays if HA Loss manual override is ON
# - Home Assistant scene calls are unavailable
# b) MQTT offline (or HA/MQTT offline):
# - This yaml does not depend on MQTT for its button logic
# - If Home Assistant/API is offline, device falls back to manual/offline behaviour
# - Buttons still operate local relays if HA Loss manual override is ON
# c) Entire WiFi/Network offline:
# - Device operates in local manual/offline behaviour only
# - Buttons still operate local relays if HA Loss manual override is ON
# - Accurate time is not needed; SNTP is not required for operation
#:########################################################################################:#
#:########################################################################################:#
# SUBSTITUTIONS:
# Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
# Device Naming
device_name: "esp-loungemiddleswitch"
friendly_name: "Lounge Middle Lightswitch (3)"
description_comment: "Lounge Main Lightswitch using a Zemismart KS-811 Triple Push Button. Downlights South (1), Downlights Middle (2), Downlights North (3) (Layout V1.1)"
device_area: "Lounge" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "Zemismart Technologies.KS-811 Triple" # Project Details
project_version: "v3.6" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
# Passwords & Secrets
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
static_ip_address: !secret esp-loungemiddleswitch_ip
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
# Don't forget to switch it back when changed.
current_ip_address: ${static_ip_address}
# Device Settings
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for for general sensors etc
# MQTT LOCAL Controls
#mqtt_device_name: "lounge-main-lights"
#mqtt_local_command_topic: "${mqtt_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
#mqtt_local_status_topic: "${mqtt_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
# MQTT REMOTE Controls
# Switch/Relay/Button Naming & Icons
#relay_icon: "mdi:lightbulb-group"
switch_1_name: "Downlights South" # Lights are connected via DMX dimmer (another esphome controller) (4 Downlights)
switch_2_name: "Downlights Middle" # Lights are connected via DMX dimmer (another esphome controller) (6 Downlights)
switch_3_name: "Downlights North" # Lights are directly connected (2 downlights)
#:########################################################################################:#
# PACKAGES:
# Included Common Packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_current_ip_address: "${current_ip_address}"
local_ota_pass: "${ota_pass}"
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
common_api: !include
file: common/api_common.yaml
#file: common/api_common_noencryption.yaml
vars:
local_api_key: "${api_key}"
#### MQTT ####
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
#### WEB PORTAL ####
#common_webportal: !include common/webportal_common.yaml
#### SNTP (Only use if you want/need accurate timeclocks) ####
#common_sntp: !include common/sntp_common.yaml
#### DIAGNOSTICS Sensors ####
diag_basic: !include common/include_basic_diag_sensors.yaml
diag_more: !include common/include_more_diag_sensors.yaml
#diag_debug: !include common/include_debug_diag_sensors.yaml
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
#:########################################################################################:#
# ESPHOME:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}" # Appears on the esphome page in HA
area: "${device_area}"
project:
name: "${project_name}"
version: "${project_version}"
#:########################################################################################:#
# HOME ASSISTANT API:
#:########################################################################################:#
api:
on_client_connected:
then:
- logger.log:
level: INFO
format: "API connected: override=%s, ha_loss_test=%s"
args:
- 'id(ha_loss_override).state ? "true" : "false"'
- 'id(ha_loss_test).state ? "true" : "false"'
- if:
condition:
switch.is_on: ha_loss_test
then:
- logger.log:
level: WARN
format: "HA Loss Test is ON: not applying relay override on connect"
else:
- if:
condition:
switch.is_on: ha_loss_override
then:
- switch.turn_on: Relay_1
- switch.turn_on: Relay_2
else:
- switch.turn_off: Relay_1
- switch.turn_off: Relay_2
on_client_disconnected:
then:
- logger.log:
level: WARN
format: "API disconnected: switching to manual/offline behavior"
#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK:
# https://esphome.io/components/esp8266.html
#:########################################################################################:#
esp8266:
board: esp01_1m
early_pin_init: false # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
board_flash_mode: dout # Default is dout
#:########################################################################################:#
# LOGGER:
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
level: "${log_level}" # INFO Level suggested, or DEBUG for testing
#baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
#esp8266_store_log_strings_in_flash: false
#tx_buffer_size: 64
#:########################################################################################:#
# STATUS LED:
# https://esphome.io/components/status_led.html
#:########################################################################################:#
status_led:
pin:
number: GPIO2
inverted: true
#:########################################################################################:#
# BINARY SENSORS:
# https://esphome.io/components/binary_sensor/
#:########################################################################################:#
binary_sensor:
# GPIO16 for KS-811 first button UNLESS
# it is a single button KS-811 in which case it is GPIO00
- platform: gpio
pin:
number: GPIO16
mode: INPUT
inverted: true
use_interrupt: false # This pin doesn't support interrupts so use polling. Only suppresses a warning.
name: "Button 1: ${switch_1_name}"
on_multi_click:
# --- Single short click ---
# Online (and override ON, and NOT test mode): use HA's last scene to decide.
# Offline (override ON): toggle physical Relay_1
# Test mode (override ON): behave like offline even if HA is connected
- timing:
- ON for at most 0.5s
- OFF for at least 0.5s
then:
- if:
condition:
and:
- switch.is_on: ha_loss_override
- api.connected:
- not:
switch.is_on: ha_loss_test
then:
- if:
condition:
lambda: |-
// Defensive: treat empty/unknown as "not All Off" so we go to a safe "All Off".
auto s = id(ha_last_scene).state;
if (s.empty() || s == "unknown" || s == "unavailable") return true;
return s != "All Off";
then:
- homeassistant.service:
service: script.lounge_set_scene
data:
scene_name: "All Off"
- logger.log:
level: INFO
format: "BTN1: Single click (online) -> Last scene was not 'All Off' -> Set 'All Off'"
else:
- homeassistant.service:
service: script.lounge_set_scene
data:
scene_name: "Bright"
- logger.log:
level: INFO
format: "BTN1: Single click (online) -> Last scene was 'All Off' -> Set 'Bright'"
else:
- if:
condition:
and:
- switch.is_on: ha_loss_override
- or:
- not:
api.connected:
- switch.is_on: ha_loss_test
then:
- if:
condition:
lambda: |-
return id(Relay_1).state;
then:
- switch.turn_off: Relay_1
- logger.log:
level: INFO
format: "BTN1: Single click (offline/test) -> Relay_1 OFF"
else:
- switch.turn_on: Relay_1
- logger.log:
level: INFO
format: "BTN1: Single click (offline/test) -> Relay_1 ON"
else:
- logger.log:
level: INFO
format: "BTN1: Single click ignored (override OFF)"
# GPIO05 for second button (only for KS-811-2 Double or -3 Triple)
- platform: gpio
pin:
number: GPIO5
mode: INPUT
inverted: true
name: "Button 2: ${switch_2_name}"
on_multi_click:
# --- Single short click ---
# Online (override ON, NOT test mode): set scene
# Offline/test (override ON): toggle Relay_2
- timing:
- ON for at most 0.5s
- OFF for at least 0.5s
then:
- if:
condition:
and:
- switch.is_on: ha_loss_override
- api.connected:
- not:
switch.is_on: ha_loss_test
then:
- homeassistant.service:
service: script.lounge_set_scene
data:
scene_name: "Movie"
- logger.log:
level: INFO
format: "BTN2: Single click (online) -> Set 'Movie' Scene"
else:
- if:
condition:
and:
- switch.is_on: ha_loss_override
- or:
- not:
api.connected:
- switch.is_on: ha_loss_test
then:
- if:
condition:
lambda: |-
return id(Relay_2).state;
then:
- switch.turn_off: Relay_2
- logger.log:
level: INFO
format: "BTN2: Single click (offline/test) -> Relay_2 OFF"
else:
- switch.turn_on: Relay_2
- logger.log:
level: INFO
format: "BTN2: Single click (offline/test) -> Relay_2 ON"
else:
- logger.log:
level: INFO
format: "BTN2: Single click ignored (override OFF)"
# GPIO04 for third button (only for KS-811-3 Triple)
- platform: gpio
pin:
number: GPIO4
mode: INPUT
inverted: true
name: "Button 3: ${switch_3_name}"
on_multi_click:
# --- Single short click ---
# Online (override ON, NOT test mode): set scene
# Offline/test (override ON): toggle Relay_3
- timing:
- ON for at most 0.5s
- OFF for at least 0.5s
then:
- if:
condition:
and:
- switch.is_on: ha_loss_override
- api.connected:
- not:
switch.is_on: ha_loss_test
then:
- homeassistant.service:
service: script.lounge_set_scene
data:
scene_name: "Reading On/Off"
- logger.log:
level: INFO
format: "BTN3: Single click (online) -> Set 'Reading On/Off' Scene"
else:
- if:
condition:
and:
- switch.is_on: ha_loss_override
- or:
- not:
api.connected:
- switch.is_on: ha_loss_test
then:
- if:
condition:
lambda: |-
return id(Relay_3).state;
then:
- switch.turn_off: Relay_3
- logger.log:
level: INFO
format: "BTN3: Single click (offline/test) -> Relay_3 OFF"
else:
- switch.turn_on: Relay_3
- logger.log:
level: INFO
format: "BTN3: Single click (offline/test) -> Relay_3 ON"
else:
- logger.log:
level: INFO
format: "BTN3: Single click ignored (override OFF)"
#:########################################################################################:#
# TEXT SENSOR COMPONENT:
# https://esphome.io/components/text_sensor/
#:########################################################################################:#
text_sensor:
- platform: homeassistant
id: ha_last_scene
entity_id: input_text.lounge_last_scene
on_value:
- logger.log:
level: DEBUG
format: "HA last scene now: %s"
args: ["x.c_str()"]
#:########################################################################################:#
# SWITCH COMPONENT:
# https://esphome.io/components/switch/
#:########################################################################################:#
switch:
# GPIO13 for KS-811 first button UNLESS it is KS-811-1 then it is GPIO12
- platform: gpio
name: "Relay 1: ${switch_1_name}"
pin: GPIO13
id: Relay_1
restore_mode: RESTORE_DEFAULT_ON
# GPIO12 for second relay (only for KS-811-2 Double or -3 Triple)
- platform: gpio
name: "Relay 2: ${switch_2_name}"
pin: GPIO12
id: Relay_2
restore_mode: RESTORE_DEFAULT_ON
# GPIO14 for third relay (only for KS-811-3 Triple)
- platform: gpio
name: "Relay 3: ${switch_3_name}"
pin: GPIO14
id: Relay_3
# HA Loss manual override (default ON; persists across restarts)
- platform: template
name: "HA Loss manual override"
id: ha_loss_override
optimistic: true
restore_mode: ALWAYS_ON
# HA Loss Test (default OFF): when ON, force "offline behavior" even if HA is connected
- platform: template
name: "HA Loss Test"
id: ha_loss_test
optimistic: true
restore_mode: ALWAYS_OFF
on_turn_on:
- logger.log:
level: WARN
format: "HA Loss Test turned ON: forcing offline/test behavior for buttons"
on_turn_off:
- logger.log:
level: INFO
format: "HA Loss Test turned OFF: forcing Relay_1 and Relay_2 ON, then restoring last scene in 30s"
- switch.turn_on: Relay_1
- switch.turn_on: Relay_2
- delay: 30s
- if:
condition:
and:
- api.connected:
- lambda: |-
auto s = id(ha_last_scene).state;
return !(s.empty() || s == "unknown" || s == "unavailable");
then:
- homeassistant.service:
service: script.lounge_set_scene
data:
scene_name: !lambda |-
return id(ha_last_scene).state;
- logger.log:
level: INFO
format: "HA Loss Test OFF: restored last scene: %s"
args: ['id(ha_last_scene).state.c_str()']
else:
- logger.log:
level: WARN
format: "HA Loss Test OFF: cannot restore scene (API not connected or last scene unknown)"
Reference in New Issue View Git Blame Copy Permalink