zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
ae00e821baddc42032bf65b27ee1471d75e5dcb9
zorruno-homeassistant/esphome/esp-mainhallwaynightlights.yaml
T
root 51bff34d2e hallway esphome devices and fixes
2026-04-04 22:36:00 +13:00

257 lines
10 KiB
YAML
Raw Blame History

#:########################################################################################:#
# TITLE: MAIN HALLWAY LIGHTSWITCH 2 (BK7231N)
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-mainhallwaylights2.yaml
#:########################################################################################:#
# VERSIONS:
# V1.1 2026-04-03 Updated yaml to zorruno layout V1.1; corrected KS-811 single naming and operation notes; updated BK7231N single-switch pin mapping
# V1.0 2026-04-03 Initial
#:########################################################################################:#
# HARDWARE:
# - Zemismart KS-811 Single push button
# - BK7231N based switch
# - BK72XX board: generic-bk7231n-qfn32-tuya
# - BK7231N single-switch pin mapping checked against KS-811 BK references
#:########################################################################################:#
# OPERATION NOTES:
# - Main hallway nightlight switch with 1 output:
# 1) Main Hallway Nightlights
# - A single press of the physical button toggles Relay 1 ON/OFF
# - Status LED uses P22
#:########################################################################################:#
# MQTT COMMANDS:
# - None
#:########################################################################################:#
# OFFLINE NOTES:
# - a) Home Assistant offline (network and MQTT online):
# - Device remains on WiFi and MQTT
# - Physical button still toggles relay locally
# - b) MQTT offline (or Home Assistant and MQTT offline):
# - Physical button still toggles relay locally
# - Remote control/state sync is unavailable until MQTT returns
# - c) Entire WiFi/network offline:
# - Physical button still toggles relay locally
# - Accurate time is not needed; SNTP is not used
#:########################################################################################:#
#:########################################################################################:#
# SUBSTITUTIONS: Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
# Device Naming
device_name: "esp-mainhallwaynightlights"
friendly_name: "Main Hallway Nightlights (1)"
description_comment: "BK7231N - Main Hallway Nightlights using a Zemismart KS-811 Single Push Button. Main Hallway Nightlights (1) (Layout V1.1)"
device_area: "Main Hallway" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "Zemismart Technologies.KS-811 Single BK7231N" # Project Details
project_version: "v1.1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
# Passwords
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
static_ip_address: !secret esp-mainhallwaynightlights_ip
mqtt_command_main_topic: !secret mqtt_command_main_topic
mqtt_status_main_topic: !secret mqtt_status_main_topic
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
# Don't forget to switch it back when changed.
current_ip_address: ${static_ip_address}
# Device Settings
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for for general sensors etc
# MQTT REMOTE Controls
mqtt_this_device_function1: "mainhallway-nightlights"
mqtt_this_device_command_topic1: "${mqtt_command_main_topic}/${mqtt_this_device_function1}"
mqtt_this_device_status_topic1: "${mqtt_status_main_topic}/${mqtt_this_device_function1}"
mqtt_command_on: "On"
mqtt_command_off: "Off"
# Default relay restore mode
# Options: RESTORE_DEFAULT_OFF, RESTORE_DEFAULT_ON, ALWAYS_ON, ALWAYS_OFF
relay_restore_mode: "RESTORE_DEFAULT_OFF"
# Switch/Relay/Button Naming & Icons
switch_1_name: "Main Hallway Nightlights"
#:########################################################################################:#
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
local_current_ip_address: "${current_ip_address}"
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
common_api: !include
file: common/api_common.yaml
#file: common/api_common_noencryption.yaml
vars:
local_api_key: "${api_key}"
#### MQTT ####
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
#### WEB PORTAL ####
#common_webportal: !include common/webportal_common.yaml
#### SNTP (Only use if you want/need accurate timeclocks) ####
#common_sntp: !include common/sntp_common.yaml
#### DIAGNOSTICS Sensors ####
diag_basic: !include common/include_basic_diag_sensors.yaml
#diag_more: !include common/include_more_diag_sensors.yaml
#diag_debug: !include common/include_debug_diag_sensors.yaml
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
#:########################################################################################:#
# PACKAGE ITEM REMOVALS / OVERRIDES:
#:########################################################################################:#
wifi:
min_auth_mode: !remove # The WPA2 only works on esp32/8266
reboot_timeout: 15min # override the selection from the common package
fast_connect: false # optional; force off in case package vars change
#mqtt:
# keepalive: 15s # overriding the value from the common package
#:########################################################################################:#
# ESPHOME:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}" # Appears on the esphome page in HA
area: "${device_area}"
project:
name: "${project_name}"
version: "${project_version}"
#:########################################################################################:#
# BUILD FOR BK CHIPSET:
# bk72xx
# https://devices.esphome.io/board/bk72xx/
#:########################################################################################:#
bk72xx:
board: generic-bk7231n-qfn32-tuya
#:########################################################################################:#
# LOGGER:
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
level: "${log_level}" # INFO Level suggested, or DEBUG for testing
baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
id: logger_id
#:########################################################################################:#
# MQTT: Device-specific MQTT command triggers
# This adds device-specific MQTT command triggers to the common MQTT configuration.
#:########################################################################################:#
mqtt:
on_connect:
- mqtt.publish:
topic: "${mqtt_this_device_status_topic1}"
payload: !lambda |-
return id(Relay_1).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
retain: true
on_message:
- topic: "${mqtt_this_device_command_topic1}"
payload: "${mqtt_command_on}"
then:
- delay: 50ms
- if:
condition:
lambda: 'return !id(Relay_1).state;'
then:
- switch.turn_on: Relay_1
- topic: "${mqtt_this_device_command_topic1}"
payload: "${mqtt_command_off}"
then:
- delay: 50ms
- if:
condition:
lambda: 'return id(Relay_1).state;'
then:
- switch.turn_off: Relay_1
#:########################################################################################:#
# STATUS LED:
# https://esphome.io/components/status_led.html
#:########################################################################################:#
status_led:
pin:
number: P22 # GPIO22
inverted: true
#:########################################################################################:#
# BINARY SENSORS:
# https://esphome.io/components/binary_sensor/
#:########################################################################################:#
binary_sensor:
- platform: gpio
id: button_1
internal: true
pin:
number: P24
mode:
input: true
pullup: true
inverted: true
name: "Button 1: ${switch_1_name}"
filters:
- delayed_on: 10ms
- delayed_off: 10ms
on_press:
- if:
condition:
switch.is_on: Relay_1
then:
- switch.turn_off: Relay_1
- mqtt.publish:
topic: "${mqtt_this_device_command_topic1}"
payload: "${mqtt_command_off}"
else:
- switch.turn_on: Relay_1
- mqtt.publish:
topic: "${mqtt_this_device_command_topic1}"
payload: "${mqtt_command_on}"
#:########################################################################################:#
# SWITCH COMPONENT:
# https://esphome.io/components/switch/
#:########################################################################################:#
switch:
- platform: gpio
name: "Relay 1: ${switch_1_name}"
pin: P16
id: Relay_1
restore_mode: ${relay_restore_mode}
on_turn_on:
- mqtt.publish:
topic: "${mqtt_this_device_status_topic1}"
payload: "${mqtt_command_on}"
retain: true
on_turn_off:
- mqtt.publish:
topic: "${mqtt_this_device_status_topic1}"
payload: "${mqtt_command_off}"
retain: true
Reference in New Issue View Git Blame Copy Permalink