ESPHome Device Builder
601 lines
23 KiB
YAML
601 lines
23 KiB
YAML
#:########################################################################################:#
|
|
# TITLE: OFFICE MAIN LIGHTSWITCH
|
|
# zorruno.com layout v1.1 2026
|
|
#:########################################################################################:#
|
|
# REPO:
|
|
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-officelights.yaml
|
|
#:########################################################################################:#
|
|
# VERSIONS:
|
|
# v3.0 2026-07-25 Refactored MQTT sync to use template HA switch actions; physical button and
|
|
# HA control now publish command topics to officeduallights; relay callbacks
|
|
# publish status only to prevent command ping-pong/chattering. 2-way sync with
|
|
# esp-officeduallights for offline HA-independent operation.
|
|
# v2.1 2026-02-25 Updated yaml to zorruno layout V1.1
|
|
# v2.0 2025-06-05 YAML Tidyups
|
|
# v1.0 2025-05-31 Initial Version
|
|
#:########################################################################################:#
|
|
# HARDWARE:
|
|
# - Zemismart KS-811 Triple push button (ESP8266)
|
|
# - Pinout/Schematic: https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
|
#:########################################################################################:#
|
|
# OPERATION NOTES:
|
|
# - Office 3-gang KS-811 (Triple) wall switch.
|
|
# - Button 1 (top) toggles Bunker Lights (both local Relay 1 physical bunker + remote dual light_1
|
|
# Right Bunker via MQTT). Local Relay 1 is a physical load; remote is the Sonoff Dual R1.
|
|
# - Button 2 (middle) toggles Overhead Lights (remote dual light_2 via MQTT). Local Relay 2 is
|
|
# a virtual mirror of the remote state only (no physical load connected).
|
|
# - Button 3 (bottom) is spare - no function assigned.
|
|
# - Home Assistant control of the exposed template switches also toggles the matching groups.
|
|
# - MQTT command topics request On/Off changes.
|
|
# - Relay state changes publish retained status only.
|
|
# - Relays never publish command topics directly. This prevents command ping-pong/chattering.
|
|
# - GPIO16 on ESP8266 does not support normal GPIO interrupts, so Button 1 uses polling mode.
|
|
#:########################################################################################:#
|
|
# MQTT COMMANDS:
|
|
# Bunker Lights (Button 1):
|
|
# - Command topic: ${mqtt_this_device_command_topic_bunker}
|
|
# Payloads: ${mqtt_command_on}, ${mqtt_command_off}, or 1 to 3600 (timer seconds)
|
|
# - Status topic: ${mqtt_this_device_status_topic_bunker}
|
|
# Payloads mirror the actual bunker relay state and are published retained.
|
|
#
|
|
# Overhead Lights (Button 2):
|
|
# - Command topic: ${mqtt_this_device_command_topic_overhead}
|
|
# Payloads: ${mqtt_command_on}, ${mqtt_command_off}, or 1 to 3600 (timer seconds)
|
|
# - Status topic: ${mqtt_this_device_status_topic_overhead}
|
|
# Payloads mirror the overhead virtual relay state and are published retained.
|
|
#
|
|
# This device subscribes to status topics from esp-officeduallights to mirror remote state.
|
|
# Timer values from esp-occupancyoffice are handled locally (countdown runs on this device).
|
|
# Physical button presses cancel any active timer before toggling.
|
|
#:########################################################################################:#
|
|
# OFFLINE NOTES:
|
|
# - a) Home Assistant offline (network and MQTT online):
|
|
# - Local button control continues for both bunker and overhead lights.
|
|
# - MQTT command/status operation continues for 2-way sync with esp-officeduallights.
|
|
# - HA entities are unavailable until HA returns.
|
|
# - b) MQTT offline (or Home Assistant and MQTT offline):
|
|
# - Local button control continues.
|
|
# - Bunker lights still toggle locally (physical relay).
|
|
# - Overhead lights cannot be toggled remotely (no MQTT transport).
|
|
# - If Home Assistant is online and connected by native ESPHome API, HA control can still
|
|
# change the local relays but remote MQTT sync is unavailable until MQTT returns.
|
|
# - c) Entire WiFi/network offline:
|
|
# - Local wall-switch button control continues for both buttons.
|
|
# - Bunker lights still toggle locally (physical relay).
|
|
# - Overhead lights cannot be controlled (no network transport).
|
|
# - Accurate time is not needed. SNTP is not used for this device.
|
|
#:########################################################################################:#
|
|
|
|
#:########################################################################################:#
|
|
# SUBSTITUTIONS: Specific device variable substitutions
|
|
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
|
#:########################################################################################:#
|
|
substitutions:
|
|
# Device Naming
|
|
device_name: "esp-officelights"
|
|
friendly_name: "Office Main Lightswitch (3)"
|
|
description_comment: "Office Main Lightswitch using a Zemismart KS-811 Triple Push Button. Bunker Lights (1), Overhead Lights (2), Spare (3) (Layout V1.1)"
|
|
device_area: "Office"
|
|
|
|
# Project Naming
|
|
project_name: "Zemismart Technologies.KS-811 Triple"
|
|
project_version: "v3.0"
|
|
|
|
# Passwords & Secrets
|
|
api_key: !secret esp-api_key
|
|
ota_pass: !secret esp-ota_pass
|
|
static_ip_address: !secret esp-officelights_ip
|
|
mqtt_command_main_topic: !secret mqtt_command_main_topic
|
|
mqtt_status_main_topic: !secret mqtt_status_main_topic
|
|
|
|
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
|
|
# Don't forget to switch it back when changed.
|
|
current_ip_address: ${static_ip_address}
|
|
|
|
# Device Settings
|
|
log_level: "INFO"
|
|
update_interval: "60s"
|
|
|
|
# Default relay restore mode
|
|
# Options: RESTORE_DEFAULT_OFF, RESTORE_DEFAULT_ON, ALWAYS_ON, ALWAYS_OFF
|
|
relay_restore_mode: "RESTORE_DEFAULT_OFF"
|
|
|
|
# MQTT LOCAL Controls - Bunker Lights
|
|
# Command topics: this device publishes here when Button 1 or HA toggles bunker.
|
|
# Status topics: this device publishes retained status here on relay state changes.
|
|
# esp-officeduallights subscribes to mirror remote bunker state.
|
|
mqtt_this_device_function_bunker: "office-main-lights-left"
|
|
mqtt_this_device_command_topic_bunker: "${mqtt_command_main_topic}/${mqtt_this_device_function_bunker}"
|
|
mqtt_this_device_status_topic_bunker: "${mqtt_status_main_topic}/${mqtt_this_device_function_bunker}"
|
|
|
|
# MQTT LOCAL Controls - Overhead Lights
|
|
# Command topics: this device publishes here when Button 2 or HA toggles overhead.
|
|
# Status topics: this device publishes retained status here on virtual relay state changes.
|
|
# esp-officeduallights subscribes to mirror remote overhead state.
|
|
mqtt_this_device_function_overhead: "office-main-lights-right"
|
|
mqtt_this_device_command_topic_overhead: "${mqtt_command_main_topic}/${mqtt_this_device_function_overhead}"
|
|
mqtt_this_device_status_topic_overhead: "${mqtt_status_main_topic}/${mqtt_this_device_function_overhead}"
|
|
|
|
# MQTT Status/Command payloads
|
|
mqtt_command_on: "On"
|
|
mqtt_command_off: "Off"
|
|
|
|
# MQTT Overhead Status - shared topic for overhead state sync
|
|
# Both this device and esp-officeduallights publish and subscribe to this topic so
|
|
# whichever device's timer finishes first keeps the other in sync.
|
|
mqtt_shared_overhead_status_function: "office-overhead-status"
|
|
mqtt_shared_overhead_status_topic: "${mqtt_status_main_topic}/${mqtt_shared_overhead_status_function}"
|
|
|
|
# Switch/Relay/Button Naming
|
|
switch_1_name: "Bunker Lights" # Physical relay (GPIO13) connected to bunker light load
|
|
switch_2_name: "Overhead Lights" # Virtual mirror of esp-officeduallights overhead state
|
|
switch_3_name: "Spare" # Virtual only, no function assigned
|
|
|
|
#:########################################################################################:#
|
|
# PACKAGES: Included Common Packages
|
|
# https://esphome.io/components/packages.html
|
|
#:########################################################################################:#
|
|
packages:
|
|
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
|
|
common_wifi: !include
|
|
file: common/network_common.yaml
|
|
vars:
|
|
local_device_name: "${device_name}"
|
|
local_static_ip_address: "${static_ip_address}"
|
|
local_ota_pass: "${ota_pass}"
|
|
local_current_ip_address: "${current_ip_address}"
|
|
|
|
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
|
|
common_api: !include
|
|
file: common/api_common.yaml
|
|
#file: common/api_common_noencryption.yaml
|
|
vars:
|
|
local_api_key: "${api_key}"
|
|
|
|
#### MQTT ####
|
|
common_mqtt: !include
|
|
file: common/mqtt_common.yaml
|
|
vars:
|
|
local_device_name: "${device_name}"
|
|
|
|
#### DIAGNOSTICS Sensors ####
|
|
diag_basic: !include common/include_basic_diag_sensors.yaml
|
|
diag_more: !include common/include_more_diag_sensors.yaml
|
|
#diag_debug: !include common/include_debug_diag_sensors.yaml
|
|
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
|
|
|
#:########################################################################################:#
|
|
# ESPHOME
|
|
# https://esphome.io/components/esphome.html
|
|
#:########################################################################################:#
|
|
esphome:
|
|
name: "${device_name}"
|
|
friendly_name: "${friendly_name}"
|
|
comment: "${description_comment}"
|
|
area: "${device_area}"
|
|
project:
|
|
name: "${project_name}"
|
|
version: "${project_version}"
|
|
|
|
#:########################################################################################:#
|
|
# ESP PLATFORM AND FRAMEWORK
|
|
# https://esphome.io/components/esp8266.html
|
|
#:########################################################################################:#
|
|
esp8266:
|
|
board: esp01_1m
|
|
early_pin_init: false # Recommended false where relays/switches are involved
|
|
board_flash_mode: dout
|
|
|
|
#:########################################################################################:#
|
|
# LOGGING
|
|
# https://esphome.io/components/logger.html
|
|
#:########################################################################################:#
|
|
logger:
|
|
level: "${log_level}"
|
|
#baud_rate: 0
|
|
id: logger_id
|
|
|
|
#:########################################################################################:#
|
|
# STATUS LED
|
|
# https://esphome.io/components/status_led.html
|
|
#:########################################################################################:#
|
|
status_led:
|
|
pin:
|
|
number: GPIO2
|
|
inverted: true
|
|
|
|
#:########################################################################################:#
|
|
# MQTT: Device-specific MQTT command triggers
|
|
# This extends the common MQTT package with local custom command/status topics.
|
|
#:########################################################################################:#
|
|
mqtt:
|
|
# Republish current relay states whenever MQTT reconnects so retained status stays accurate
|
|
# for subscribers that reconnect later.
|
|
on_connect:
|
|
- mqtt.publish:
|
|
topic: "${mqtt_this_device_status_topic_bunker}"
|
|
payload: !lambda |-
|
|
return id(Relay_1).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
|
|
retain: true
|
|
- mqtt.publish:
|
|
topic: "${mqtt_this_device_status_topic_overhead}"
|
|
payload: !lambda |-
|
|
return id(Relay_2).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
|
|
retain: true
|
|
- mqtt.publish:
|
|
topic: "${mqtt_shared_overhead_status_topic}"
|
|
payload: !lambda |-
|
|
return id(Relay_2).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
|
|
retain: true
|
|
|
|
on_message:
|
|
# Mirror remote overhead command onto virtual Relay_2, but only if a real state change
|
|
# is needed. Do not republish the command from here. Relay status is published by the
|
|
# relay callback below.
|
|
- topic: "${mqtt_this_device_command_topic_overhead}"
|
|
payload: "${mqtt_command_on}"
|
|
then:
|
|
- script.stop: overhead_timer_script
|
|
- if:
|
|
condition:
|
|
lambda: "return !id(Relay_2).state;"
|
|
then:
|
|
- switch.turn_on: Relay_2
|
|
|
|
- topic: "${mqtt_this_device_command_topic_overhead}"
|
|
payload: "${mqtt_command_off}"
|
|
then:
|
|
- script.stop: overhead_timer_script
|
|
- if:
|
|
condition:
|
|
lambda: "return id(Relay_2).state;"
|
|
then:
|
|
- switch.turn_off: Relay_2
|
|
|
|
- topic: "${mqtt_this_device_command_topic_overhead}"
|
|
then:
|
|
- lambda: |-
|
|
if (x.empty()) {
|
|
return;
|
|
}
|
|
|
|
bool numeric_payload = true;
|
|
for (char c : x) {
|
|
if (c < '0' || c > '9') {
|
|
numeric_payload = false;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!numeric_payload) {
|
|
return;
|
|
}
|
|
|
|
const int timer_seconds = atoi(x.c_str());
|
|
if (timer_seconds < 1 || timer_seconds > 3600) {
|
|
return;
|
|
}
|
|
|
|
id(overhead_timer_script)->execute(timer_seconds * 1000);
|
|
|
|
# Mirror shared overhead status from esp-officeduallights onto virtual Relay_2.
|
|
# This handles the case where the dual lights' overhead timer finishes and turns off
|
|
# the overhead — the main lightswitch mirrors the state so its virtual relay stays
|
|
# in sync. State guards prevent ping-pong with the command topic handlers above.
|
|
- topic: "${mqtt_shared_overhead_status_topic}"
|
|
payload: "${mqtt_command_on}"
|
|
then:
|
|
- if:
|
|
condition:
|
|
lambda: "return !id(Relay_2).state;"
|
|
then:
|
|
- switch.turn_on: Relay_2
|
|
|
|
- topic: "${mqtt_shared_overhead_status_topic}"
|
|
payload: "${mqtt_command_off}"
|
|
then:
|
|
- if:
|
|
condition:
|
|
lambda: "return id(Relay_2).state;"
|
|
then:
|
|
- switch.turn_off: Relay_2
|
|
|
|
# Mirror remote bunker command onto Relay_1, but only if a real state change is needed.
|
|
# This handles commands from esp-officeduallights when its local button toggles the
|
|
# physical bunker light and publishes status.
|
|
- topic: "${mqtt_this_device_status_topic_bunker}"
|
|
payload: "${mqtt_command_on}"
|
|
then:
|
|
- if:
|
|
condition:
|
|
lambda: "return !id(Relay_1).state;"
|
|
then:
|
|
- switch.turn_on: Relay_1
|
|
|
|
- topic: "${mqtt_this_device_status_topic_bunker}"
|
|
payload: "${mqtt_command_off}"
|
|
then:
|
|
- if:
|
|
condition:
|
|
lambda: "return id(Relay_1).state;"
|
|
then:
|
|
- switch.turn_off: Relay_1
|
|
|
|
# Bunker command from occupancy sensor or other MQTT publishers. Handles On, Off,
|
|
# and numeric timer values (1 to 3600 seconds).
|
|
- topic: "${mqtt_this_device_command_topic_bunker}"
|
|
payload: "${mqtt_command_on}"
|
|
then:
|
|
- script.stop: bunker_timer_script
|
|
- if:
|
|
condition:
|
|
lambda: "return !id(Relay_1).state;"
|
|
then:
|
|
- switch.turn_on: Relay_1
|
|
|
|
- topic: "${mqtt_this_device_command_topic_bunker}"
|
|
payload: "${mqtt_command_off}"
|
|
then:
|
|
- script.stop: bunker_timer_script
|
|
- if:
|
|
condition:
|
|
lambda: "return id(Relay_1).state;"
|
|
then:
|
|
- switch.turn_off: Relay_1
|
|
|
|
- topic: "${mqtt_this_device_command_topic_bunker}"
|
|
then:
|
|
- lambda: |-
|
|
if (x.empty()) {
|
|
return;
|
|
}
|
|
|
|
bool numeric_payload = true;
|
|
for (char c : x) {
|
|
if (c < '0' || c > '9') {
|
|
numeric_payload = false;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!numeric_payload) {
|
|
return;
|
|
}
|
|
|
|
const int timer_seconds = atoi(x.c_str());
|
|
if (timer_seconds < 1 || timer_seconds > 3600) {
|
|
return;
|
|
}
|
|
|
|
id(bunker_timer_script)->execute(timer_seconds * 1000);
|
|
|
|
#:########################################################################################:#
|
|
# SCRIPTS
|
|
# https://esphome.io/components/script.html
|
|
#:########################################################################################:#
|
|
script:
|
|
# Local/HA requested ON for Bunker Lights. Change the local relay immediately, then publish
|
|
# a non-retained command so esp-officeduallights follows.
|
|
- id: office_bunker_on
|
|
mode: restart
|
|
then:
|
|
- if:
|
|
condition:
|
|
lambda: "return !id(Relay_1).state;"
|
|
then:
|
|
- switch.turn_on: Relay_1
|
|
- mqtt.publish:
|
|
topic: "${mqtt_this_device_command_topic_bunker}"
|
|
payload: "${mqtt_command_on}"
|
|
retain: false
|
|
|
|
# Local/HA requested OFF for Bunker Lights.
|
|
- id: office_bunker_off
|
|
mode: restart
|
|
then:
|
|
- if:
|
|
condition:
|
|
lambda: "return id(Relay_1).state;"
|
|
then:
|
|
- switch.turn_off: Relay_1
|
|
- mqtt.publish:
|
|
topic: "${mqtt_this_device_command_topic_bunker}"
|
|
payload: "${mqtt_command_off}"
|
|
retain: false
|
|
|
|
# Physical Button 1 toggle logic for Bunker Lights. This is the only place that decides
|
|
# ON vs OFF for the bunker.
|
|
- id: office_bunker_toggle
|
|
mode: restart
|
|
then:
|
|
- if:
|
|
condition:
|
|
lambda: "return id(Relay_1).state;"
|
|
then:
|
|
- script.execute: office_bunker_off
|
|
else:
|
|
- script.execute: office_bunker_on
|
|
|
|
# Local/HA requested ON for Overhead Lights. Change the virtual mirror immediately, then
|
|
# publish a non-retained command so esp-officeduallights follows.
|
|
- id: office_overhead_on
|
|
mode: restart
|
|
then:
|
|
- if:
|
|
condition:
|
|
lambda: "return !id(Relay_2).state;"
|
|
then:
|
|
- switch.turn_on: Relay_2
|
|
- mqtt.publish:
|
|
topic: "${mqtt_this_device_command_topic_overhead}"
|
|
payload: "${mqtt_command_on}"
|
|
retain: false
|
|
|
|
# Local/HA requested OFF for Overhead Lights.
|
|
- id: office_overhead_off
|
|
mode: restart
|
|
then:
|
|
- if:
|
|
condition:
|
|
lambda: "return id(Relay_2).state;"
|
|
then:
|
|
- switch.turn_off: Relay_2
|
|
- mqtt.publish:
|
|
topic: "${mqtt_this_device_command_topic_overhead}"
|
|
payload: "${mqtt_command_off}"
|
|
retain: false
|
|
|
|
# Physical Button 2 toggle logic for Overhead Lights.
|
|
- id: office_overhead_toggle
|
|
mode: restart
|
|
then:
|
|
- if:
|
|
condition:
|
|
lambda: "return id(Relay_2).state;"
|
|
then:
|
|
- script.execute: office_overhead_off
|
|
else:
|
|
- script.execute: office_overhead_on
|
|
|
|
# Bunker timer script. Turns on immediately, waits for the duration, then turns off.
|
|
# mode: restart means a new valid timer value restarts the timer from zero.
|
|
- id: bunker_timer_script
|
|
mode: restart
|
|
parameters:
|
|
timer_duration_ms: int
|
|
then:
|
|
- switch.turn_on: Relay_1
|
|
- delay: !lambda "return timer_duration_ms;"
|
|
- switch.turn_off: Relay_1
|
|
|
|
# Overhead timer script. Turns on immediately, waits for the duration, then turns off.
|
|
- id: overhead_timer_script
|
|
mode: restart
|
|
parameters:
|
|
timer_duration_ms: int
|
|
then:
|
|
- switch.turn_on: Relay_2
|
|
- delay: !lambda "return timer_duration_ms;"
|
|
- switch.turn_off: Relay_2
|
|
|
|
#:########################################################################################:#
|
|
# BINARY SENSORS
|
|
# https://esphome.io/components/binary_sensor/
|
|
#:########################################################################################:#
|
|
binary_sensor:
|
|
# Button 1 (GPIO16) - polling (GPIO16 has no interrupts)
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO16
|
|
mode: INPUT
|
|
inverted: true
|
|
use_interrupt: false
|
|
name: "Button 1: ${switch_1_name}"
|
|
filters:
|
|
- delayed_on: 10ms
|
|
- delayed_off: 10ms
|
|
on_press:
|
|
- script.execute: office_bunker_toggle
|
|
|
|
# Button 2 (GPIO05)
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO05
|
|
mode: INPUT
|
|
inverted: true
|
|
name: "Button 2: ${switch_2_name}"
|
|
filters:
|
|
- delayed_on: 10ms
|
|
- delayed_off: 10ms
|
|
on_press:
|
|
- script.execute: office_overhead_toggle
|
|
|
|
# Button 3 (GPIO4) - Spare
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO4
|
|
mode: INPUT
|
|
inverted: true
|
|
name: "Button 3: ${switch_3_name}"
|
|
|
|
#:########################################################################################:#
|
|
# SWITCH
|
|
# https://esphome.io/components/switch/
|
|
#:########################################################################################:#
|
|
switch:
|
|
# Exposed Home Assistant control for Bunker Lights. This controls the local relay and
|
|
# publishes the matching command so esp-officeduallights follows.
|
|
- platform: template
|
|
name: "Relay 1: ${switch_1_name}"
|
|
id: Relay_1_HA
|
|
lambda: |-
|
|
return id(Relay_1).state;
|
|
turn_on_action:
|
|
- script.execute: office_bunker_on
|
|
turn_off_action:
|
|
- script.execute: office_bunker_off
|
|
|
|
# Exposed Home Assistant control for Overhead Lights. This publishes the matching command
|
|
# so esp-officeduallights follows. Local Relay_2 is a virtual mirror of remote state.
|
|
- platform: template
|
|
name: "Relay 2: ${switch_2_name}"
|
|
id: Relay_2_HA
|
|
lambda: |-
|
|
return id(Relay_2).state;
|
|
turn_on_action:
|
|
- script.execute: office_overhead_on
|
|
turn_off_action:
|
|
- script.execute: office_overhead_off
|
|
|
|
# Physical Relay 1 (Bunker Lights). Kept internal so HA uses the template switch above.
|
|
# Relay callbacks publish retained status only, not commands.
|
|
- platform: gpio
|
|
name: "Internal Relay 1: ${switch_1_name}"
|
|
internal: true
|
|
pin: GPIO13
|
|
id: Relay_1
|
|
restore_mode: ${relay_restore_mode}
|
|
on_turn_on:
|
|
- mqtt.publish:
|
|
topic: "${mqtt_this_device_status_topic_bunker}"
|
|
payload: "${mqtt_command_on}"
|
|
retain: true
|
|
on_turn_off:
|
|
- mqtt.publish:
|
|
topic: "${mqtt_this_device_status_topic_bunker}"
|
|
payload: "${mqtt_command_off}"
|
|
retain: true
|
|
|
|
# Virtual Relay 2 (Overhead Lights mirror). No physical load connected. Mirrors the state
|
|
# of esp-officeduallights overhead light via MQTT status subscription.
|
|
- platform: gpio
|
|
name: "Internal Relay 2: ${switch_2_name}"
|
|
internal: true
|
|
pin: GPIO12
|
|
id: Relay_2
|
|
restore_mode: ${relay_restore_mode}
|
|
on_turn_on:
|
|
- mqtt.publish:
|
|
topic: "${mqtt_this_device_status_topic_overhead}"
|
|
payload: "${mqtt_command_on}"
|
|
retain: true
|
|
- mqtt.publish:
|
|
topic: "${mqtt_shared_overhead_status_topic}"
|
|
payload: "${mqtt_command_on}"
|
|
retain: true
|
|
on_turn_off:
|
|
- mqtt.publish:
|
|
topic: "${mqtt_this_device_status_topic_overhead}"
|
|
payload: "${mqtt_command_off}"
|
|
retain: true
|
|
- mqtt.publish:
|
|
topic: "${mqtt_shared_overhead_status_topic}"
|
|
payload: "${mqtt_command_off}"
|
|
retain: true
|
|
|
|
# Relay 3 (Spare) - no function assigned
|
|
- platform: gpio
|
|
name: "Relay 3: ${switch_3_name}"
|
|
pin: GPIO14
|
|
id: Relay_3
|