265 lines
8.8 KiB
YAML
265 lines
8.8 KiB
YAML
#############################################
|
|
#############################################
|
|
# DOWNSTAIRS BATHROOM MAIN LIGHTSWITCH
|
|
# Zemismart KS-811 Triple push button
|
|
#
|
|
# V1.0 2025-02-14 Initial Version
|
|
#
|
|
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
|
#
|
|
# INSTRUCTIONS
|
|
# -
|
|
#
|
|
# MQTT Commands
|
|
# Values will be set in place on the update_interval time, not immediately
|
|
# Use 00:00 in 24hr format for time setting. Note there is no weekday/weekend setting
|
|
# mqtt_timer_topic/morning-on/06:00 : Time towel rail will go on
|
|
# mqtt_timer_topic/morning-off/08:00 : Time towel rail will go off
|
|
# mqtt_timer_topic/evening-on/09:00 : Time towel rail will go on
|
|
# mqtt_timer_topic/evening-off/00:00 : Time towel rail will go off
|
|
# mqtt_timer_topic/operation/ON : Towel rail permanently on
|
|
# mqtt_timer_topic/operation/OFF : Towel rail permanently off
|
|
# mqtt_timer_topic/operation/TIMER : Towel rail will obey timer settings
|
|
# mqtt_timer_topic/operation/STARTUP : Turn on for 2 hours then TIMER (also on startup)
|
|
#
|
|
#############################################
|
|
#############################################
|
|
|
|
substitutions:
|
|
|
|
#############################################
|
|
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
|
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
|
#############################################
|
|
devicename: "esp-downstbathswitch"
|
|
friendly_name: "Downstairs Bath Lightswitch"
|
|
description_comment: "Downstairs Bathroom Main Lightswitch using a Zemismart KS-811 Triple Push Button. Main Light (1), Cabinet Light (2), Extract Fan (3)"
|
|
|
|
api_key: !secret esp-downstbathswitch_api_key # unfortunately you can't use substitutions inside secrets names
|
|
ota_pass: !secret esp-downstbathswitch_ota_pass # unfortunately you can't use substitutions inside secrets names
|
|
static_ip_address: !secret esp-downstbathswitch_ip
|
|
|
|
#mqtt_timer_topic: "viewroad-commands/masterbath-towelrail" # Topics you will use to change stuff
|
|
#startup_duration: "120" # Minutes to stay ON in STARTUP mode before reverting to TIMER
|
|
#timezone: "Pacific/Auckland" # For setting clock with snmp
|
|
|
|
|
|
#############################################
|
|
# MY SYSTEM VARIABLE SUBSTITUTIONS
|
|
#############################################
|
|
wifi_ssid: !secret ha_wifi_ssid
|
|
wifi_password: !secret ha_wifi_password
|
|
fallback_ap_password: !secret fallback_ap_password
|
|
|
|
# Add these if we are giving it a static ip, or remove them in the Wifi section
|
|
static_ip_subnet: !secret ha_wifi_subnet
|
|
static_ip_gateway: !secret ha_wifi_gateway
|
|
|
|
mqtt_server: !secret ha_mqtt_server
|
|
mqtt_username: !secret ha_mqtt_username
|
|
mqtt_password: !secret ha_mqtt_password
|
|
mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
|
|
|
|
# Add these if we are using the internal web server (this is pretty processor intensive)
|
|
#web_server_username: !secret web_server_username
|
|
#web_server_password: !secret web_server_password
|
|
|
|
update_interval: 60s # update time for for general sensors etc
|
|
|
|
|
|
|
|
#############################################
|
|
# ESPHome
|
|
# https://esphome.io/components/esphome.html
|
|
#############################################
|
|
esphome:
|
|
name: ${devicename}
|
|
friendly_name: ${friendly_name}
|
|
comment: ${description_comment} #Appears on the esphome page in HA
|
|
|
|
|
|
#############################################
|
|
# ESP Platform and Framework
|
|
# https://esphome.io/components/esp32.html
|
|
#############################################
|
|
esp8266:
|
|
board: esp01_1m # The original sonoff basic
|
|
|
|
#############################################
|
|
# ESPHome Logging Enable
|
|
# https://esphome.io/components/logger.html
|
|
#############################################
|
|
logger:
|
|
level: INFO #INFO Level suggested, or DEBUG for testing
|
|
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
|
#esp8266_store_log_strings_in_flash: false
|
|
#tx_buffer_size: 64
|
|
|
|
#############################################
|
|
# Enable the Home Assistant API
|
|
# https://esphome.io/components/api.html
|
|
#############################################
|
|
api:
|
|
encryption:
|
|
key: ${api_key}
|
|
|
|
#############################################
|
|
# Enable Over the Air Update Capability
|
|
# https://esphome.io/components/ota.html?highlight=ota
|
|
#############################################
|
|
ota:
|
|
- platform: esphome
|
|
password: ${ota_pass}
|
|
|
|
#############################################
|
|
# Safe Mode
|
|
# Safe mode will detect boot loops
|
|
# https://esphome.io/components/safe_mode
|
|
#############################################
|
|
safe_mode:
|
|
|
|
#############################################
|
|
# Wifi Settings
|
|
# https://esphome.io/components/wifi.html
|
|
#
|
|
# Power Save mode (can reduce wifi reliability)
|
|
# NONE (least power saving, Default for ESP8266)
|
|
# LIGHT (Default for ESP32)
|
|
# HIGH (most power saving)
|
|
#############################################
|
|
wifi:
|
|
ssid: ${wifi_ssid}
|
|
password: ${wifi_password}
|
|
#power_save_mode: LIGHT # https://esphome.io/components/wifi.html#wifi-power-save-mode
|
|
manual_ip: # optional static IP address
|
|
static_ip: ${static_ip_address}
|
|
gateway: ${static_ip_gateway}
|
|
subnet: ${static_ip_subnet}
|
|
ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
|
ssid: ${devicename} AP
|
|
password: ${fallback_ap_password}
|
|
ap_timeout: 30min # Time until it brings up fallback AP. default is 1min
|
|
|
|
captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails
|
|
|
|
#############################################
|
|
# Real time clock time source for ESPHome
|
|
# If it's invalid, we fall back to an internal clock
|
|
# https://esphome.io/components/time/
|
|
# https://esphome.io/components/time/sntp
|
|
#############################################
|
|
time:
|
|
- platform: sntp
|
|
id: sntp_time
|
|
|
|
#############################################
|
|
# MQTT Monitoring
|
|
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
|
# MUST also have api enabled if you enable MQTT
|
|
#############################################
|
|
mqtt:
|
|
broker: ${mqtt_server}
|
|
topic_prefix: ${mqtt_topic}/${devicename}
|
|
username: ${mqtt_username}
|
|
password: ${mqtt_password}
|
|
#discovery: True # enable entity discovery (true is default)
|
|
#discover_ip: True # enable device discovery (true is default)
|
|
|
|
#############################################
|
|
# Global Variables for use in automations etc
|
|
# https://esphome.io/guides/automations.html?highlight=globals#global-variables
|
|
#############################################
|
|
#globals:
|
|
|
|
#############################################
|
|
# TEXT SENSORS
|
|
# https://esphome.io/components/text_sensor/
|
|
#############################################
|
|
text_sensor:
|
|
- platform: version
|
|
name: ${friendly_name} Version
|
|
- platform: wifi_info
|
|
ip_address:
|
|
name: ${friendly_name} IP Address
|
|
|
|
#############################################
|
|
# STATUS LED
|
|
# https://esphome.io/components/status_led.html
|
|
#############################################
|
|
status_led:
|
|
pin:
|
|
number: GPIO2
|
|
inverted: yes
|
|
|
|
#############################################
|
|
# BINARY SENSORS
|
|
# https://esphome.io/components/binary_sensor/
|
|
#############################################
|
|
binary_sensor:
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO16
|
|
mode: INPUT
|
|
inverted: True
|
|
name: "Light Switch 1 (Main)"
|
|
on_press:
|
|
- switch.toggle: Relay_1
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO05
|
|
mode: INPUT
|
|
inverted: True
|
|
name: "Light Switch 2 (Cabinet)"
|
|
on_press:
|
|
- switch.toggle: Relay_2
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO04
|
|
mode: INPUT
|
|
inverted: True
|
|
name: "Extract Fan"
|
|
on_press:
|
|
- switch.toggle: Relay_3
|
|
|
|
#############################################
|
|
# SWITCH COMPONENT
|
|
# https://esphome.io/components/switch/
|
|
#############################################
|
|
switch:
|
|
- platform: gpio
|
|
name: "Main Light"
|
|
pin: GPIO13
|
|
id: Relay_1
|
|
- platform: gpio
|
|
name: "Cabinet Light"
|
|
pin: GPIO12
|
|
id: Relay_2
|
|
- platform: gpio
|
|
name: "Extract Fan"
|
|
pin: GPIO14
|
|
id: Relay_3
|
|
|
|
#############################################
|
|
# GENERAL SENSORS
|
|
# https://esphome.io/components/sensor/
|
|
#############################################
|
|
sensor:
|
|
- platform: uptime # Uptime for this device
|
|
name: ${friendly_name} Uptime
|
|
update_interval: ${update_interval}
|
|
entity_category: "diagnostic"
|
|
- platform: wifi_signal # Wifi Strength
|
|
name: ${friendly_name} Wifi Signal dB
|
|
id: wifi_signal_db
|
|
update_interval: ${update_interval}
|
|
entity_category: "diagnostic"
|
|
- platform: copy # Reports the WiFi signal strength in %
|
|
source_id: wifi_signal_db
|
|
name: ${friendly_name} WiFi Signal Percent
|
|
filters:
|
|
- lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
|
|
unit_of_measurement: "Signal %"
|
|
entity_category: "diagnostic"
|
|
device_class: ""
|
|
|