zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
f7bfa78835fac47165b85f46fa3fdcdbd95cbe5b
zorruno-homeassistant/esphome/esp-officeduallights.yaml
T
root f7bfa78835 more esphome devices and fixes
2026-04-03 21:34:23 +13:00

344 lines
11 KiB
YAML
Raw Blame History

#:########################################################################################:#
# TITLE: OFFICE DUAL LIGHT CONTROL
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-officeduallights.yaml
#:########################################################################################:#
# VERSIONS:
# V2.5 2026-03-11 Updated yaml to zorruno layout V1.1
# V2.4 2025-06-30 Tidied up MQTT direct relay control (esps can control each other via MQTT)
# V2.3 2025-06-18 Added MQTT direct relay control
#:########################################################################################:#
# HARDWARE:
# - Sonoff Dual R1
# - ESP8266 based
# - 2 x relay outputs
# - 2 x local push buttons
# - Relay control via UART serial commands
# - Status LED on GPIO13
#:########################################################################################:#
# OPERATION NOTES:
# - Controls 2 office light circuits:
# - Overhead cool white lights
# - Right hand warm bunker light
# - Local button 1 toggles relay/light 1
# - Local button 2 toggles relay/light 2
# - Relay state changes are sent out via MQTT status topics
# - Template binary lights drive the template relay switches
# - Sonoff Dual R1 requires UART serial packets to operate the physical relays
#
# MQTT COMMANDS:
# - Command relay 1:
# - ${mqtt_local_command_topic}/relay1/set ON or OFF
# - Command relay 2:
# - ${mqtt_local_command_topic}/relay2/set ON or OFF
# - Relay 1 status publishes to:
# - ${mqtt_local_status_topic}/relay1/state
# - Relay 2 status publishes to:
# - ${mqtt_local_status_topic}/relay2/state
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant offline (network and MQTT still online):
# - Device continues to operate from local buttons
# - Device can still be controlled directly by MQTT
# - Relay status still publishes by MQTT if broker is available
#
# b) MQTT offline (or HA and MQTT both offline):
# - Device continues to operate from local buttons only
# - No direct inter-ESP MQTT control available
# - No MQTT state feedback available
#
# c) Entire WiFi / Network offline:
# - Device continues to operate from local buttons only
# - No HA control or MQTT control/status available
# - Accurate time is not needed; SNTP is not required for operation
#:########################################################################################:#
#:########################################################################################:#
# SUBSTITUTIONS:
# Specific device variable substitutions
#:########################################################################################:#
substitutions:
# Device Naming
device_name: "esp-officeduallights"
friendly_name: "Office Dual Lights"
description_comment: "Dual Office Lights (Overhead and right hand Bunker) :: Sonoff Dual R1 (Layout V1.1)"
device_area: "Office"
# Project Naming
project_name: "Sonoff Technologies.Sonoff Dual R1"
project_version: "v2.5"
# Passwords and Secrets
api_key: !secret esp-api_key
ota_pass: !secret esp-ota_pass
static_ip_address: !secret esp-officeduallights_ip
current_ip_address: ${static_ip_address}
mqtt_local_command_main_topic: !secret mqtt_command_main_topic
mqtt_local_status_main_topic: !secret mqtt_status_main_topic
# Device Settings
relay_icon: "mdi:lightbulb-group"
log_level: "NONE"
update_interval: "60s"
# MQTT Controls
mqtt_device_name: "office-dual-lights"
mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}"
mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}"
# Switch Naming
switch_1_name: "Dual L1 Relay"
relay_1_icon: "mdi:lightbulb"
light_1_name: "Light 1 (Right Hand Bunker Light)"
switch_2_name: "Dual L2 Relay"
relay_2_icon: "mdi:lightbulb"
light_2_name: "Light 2 (Cool White Overhead Lights)"
#:########################################################################################:#
# PACKAGES:
# Included common packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_current_ip_address: "${current_ip_address}"
local_ota_pass: "${ota_pass}"
common_api: !include
file: common/api_common.yaml
# file: common/api_common_noencryption.yaml
vars:
local_api_key: "${api_key}"
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
# common_webportal: !include common/webportal_common.yaml
# common_sntp: !include common/sntp_common.yaml
diag_basic: !include common/include_basic_diag_sensors.yaml
diag_more: !include common/include_more_diag_sensors.yaml
# diag_debug: !include common/include_debug_diag_sensors.yaml
# diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
#:########################################################################################:#
# ESPHOME:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}"
area: "${device_area}"
#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK:
# https://esphome.io/components/esp8266.html
#:########################################################################################:#
esp8266:
board: esp01_1m
restore_from_flash: false
preferences:
flash_write_interval: 5min
mdns:
disabled: true
#:########################################################################################:#
# LOGGER:
# Sonoff Dual cannot use UART logging because UART is required for relay control
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
level: "${log_level}"
baud_rate: 0
#:########################################################################################:#
# UART BUS:
# https://esphome.io/components/uart.html
#:########################################################################################:#
uart:
tx_pin: GPIO01
rx_pin: GPIO03
baud_rate: 19200
#:########################################################################################:#
# MQTT:
# Device-specific MQTT command triggers
#:########################################################################################:#
mqtt:
on_message:
- topic: "${mqtt_local_command_topic}/relay1/set"
payload: "ON"
then:
- switch.turn_on: relay_1
- light.turn_on: light_1
- topic: "${mqtt_local_command_topic}/relay1/set"
payload: "OFF"
then:
- switch.turn_off: relay_1
- light.turn_off: light_1
- topic: "${mqtt_local_command_topic}/relay2/set"
payload: "ON"
then:
- switch.turn_on: relay_2
- light.turn_on: light_2
- topic: "${mqtt_local_command_topic}/relay2/set"
payload: "OFF"
then:
- switch.turn_off: relay_2
- light.turn_off: light_2
#:########################################################################################:#
# STATUS LED:
# Sonoff Dual LED is on GPIO13
# https://esphome.io/components/status_led.html
#:########################################################################################:#
status_led:
pin:
number: GPIO13
inverted: true
#:########################################################################################:#
# BINARY SENSORS:
# Sonoff Dual R1 buttons are GPIO04 and GPIO14
# https://esphome.io/components/binary_sensor/
#:########################################################################################:#
binary_sensor:
- platform: gpio
pin:
number: GPIO4
mode: INPUT_PULLUP
inverted: true
id: button_1
on_press:
- switch.toggle: relay_1
- platform: gpio
pin:
number: GPIO14
mode: INPUT_PULLUP
inverted: true
id: button_2
on_press:
- switch.toggle: relay_2
#:########################################################################################:#
# SWITCH:
# Sonoff Dual R1 requires serial data packets to switch the relays
# https://esphome.io/components/switch/
#:########################################################################################:#
switch:
- platform: template
name: "${switch_1_name}"
id: relay_1
optimistic: true
icon: "${relay_1_icon}"
internal: true
turn_on_action:
- mqtt.publish:
topic: "${mqtt_local_status_topic}/relay1/state"
payload: "ON"
- if:
condition:
switch.is_off: relay_2
then:
- uart.write: [0xA0, 0x04, 0x01, 0xA1]
else:
- uart.write: [0xA0, 0x04, 0x03, 0xA1]
turn_off_action:
- mqtt.publish:
topic: "${mqtt_local_status_topic}/relay1/state"
payload: "OFF"
- if:
condition:
switch.is_off: relay_2
then:
- uart.write: [0xA0, 0x04, 0x00, 0xA1]
else:
- uart.write: [0xA0, 0x04, 0x02, 0xA1]
- platform: template
name: "${switch_2_name}"
id: relay_2
optimistic: true
icon: "${relay_2_icon}"
internal: true
turn_on_action:
- mqtt.publish:
topic: "${mqtt_local_status_topic}/relay2/state"
payload: "ON"
- if:
condition:
switch.is_off: relay_1
then:
- uart.write: [0xA0, 0x04, 0x02, 0xA1]
else:
- uart.write: [0xA0, 0x04, 0x03, 0xA1]
turn_off_action:
- mqtt.publish:
topic: "${mqtt_local_status_topic}/relay2/state"
payload: "OFF"
- if:
condition:
switch.is_off: relay_1
then:
- uart.write: [0xA0, 0x04, 0x00, 0xA1]
else:
- uart.write: [0xA0, 0x04, 0x01, 0xA1]
#:########################################################################################:#
# OUTPUTS:
# Template outputs drive the relay template switches when the light state changes
# https://esphome.io/components/output/
#:########################################################################################:#
output:
- platform: template
id: light_output_1
type: binary
write_action:
- lambda: |-
if (state) {
id(relay_1).turn_on();
} else {
id(relay_1).turn_off();
}
- platform: template
id: light_output_2
type: binary
write_action:
- lambda: |-
if (state) {
id(relay_2).turn_on();
} else {
id(relay_2).turn_off();
}
#:########################################################################################:#
# LIGHT:
# https://esphome.io/components/light/
#:########################################################################################:#
light:
- platform: binary
name: "${light_1_name}"
id: light_1
output: light_output_1
- platform: binary
name: "${light_2_name}"
id: light_2
output: light_output_2
Reference in New Issue View Git Blame Copy Permalink