various esphome changes
This commit is contained in:
root
21
esphome/common/mqtt_common.yaml
Normal file
21
esphome/common/mqtt_common.yaml
Normal file
@@ -0,0 +1,21 @@
|
||||
#############################################
|
||||
# SYSTEM SPECIFIC VARIABLE SUBSTITUTIONS
|
||||
#############################################
|
||||
substitutions:
|
||||
mqtt_server: !secret ha_mqtt_server
|
||||
mqtt_username: !secret ha_mqtt_username
|
||||
mqtt_password: !secret ha_mqtt_password
|
||||
mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
|
||||
|
||||
#############################################
|
||||
# MQTT Monitoring
|
||||
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
||||
# MUST also have api enabled if you enable MQTT
|
||||
#############################################
|
||||
mqtt:
|
||||
broker: ${mqtt_server}
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
discovery: false # enable entity discovery (true is default, we don't want two HA Instances)
|
||||
id: mqtt_client
|
||||
77
esphome/common/multiclick_pushbutton_common.yaml
Normal file
77
esphome/common/multiclick_pushbutton_common.yaml
Normal file
@@ -0,0 +1,77 @@
|
||||
substitutions:
|
||||
local_gpioinvert: "True"
|
||||
local_singleclick_duration: "300000" # 5 minutes in ms
|
||||
# local_doubleclick_duration: "1800000" # 30 minutes in ms
|
||||
# local_tripleclick_duration: "7200000" # 2 hours in ms
|
||||
|
||||
#globals:
|
||||
# - id: single_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_singleclick_duration}
|
||||
# - id: double_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_doubleclick_duration}
|
||||
# - id: triple_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_tripleclick_duration}
|
||||
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: ${local_gpio}
|
||||
mode: INPUT
|
||||
inverted: ${local_gpioinvert}
|
||||
name: ${local_name}
|
||||
on_multi_click:
|
||||
# Single Click: one press (short press/release)
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
if (id(Relay_3).state) {
|
||||
ESP_LOGD("button3", "Single click: Relay_3 is on, turning it off.");
|
||||
id(Relay_3).turn_off();
|
||||
} else {
|
||||
ESP_LOGD("button3", "Single click: Relay_3 is off, turning it on for %d ms.", id(single_click_delay));
|
||||
id(Relay_3).turn_on();
|
||||
delay(id(single_click_delay));
|
||||
id(Relay_3).turn_off();
|
||||
}
|
||||
# # Double Click: two quick press/release cycles
|
||||
# - timing:
|
||||
# - ON for at most 1s
|
||||
## - OFF for at most 1s
|
||||
# - ON for at most 1s
|
||||
# - OFF for at least 0.5s
|
||||
# then:
|
||||
# - lambda: |-
|
||||
# ESP_LOGD(${local_gpio}, "Double click detected: turning ",${local_relay_id}," on for %d ms.", ${local_doubleclick_duration});
|
||||
## ${local_relay_id}->turn_on();
|
||||
# delay(${local_doubleclick_duration});
|
||||
# ${local_relay_id}->turn_off();
|
||||
# # Triple Click: three quick press/release cycles
|
||||
## - timing:
|
||||
# - ON for at most 1s
|
||||
## - OFF for at most 1s
|
||||
# - ON for at most 1s
|
||||
# - OFF for at most 1s
|
||||
# - ON for at most 1s
|
||||
# - OFF for at least 0.5s
|
||||
# then:
|
||||
# - lambda: |-
|
||||
# ESP_LOGD(${local_gpio}, "Triple click detected: turning ",${local_relay_id}," on for %d ms.", ${local_tripleclick_duration});
|
||||
# ${local_relay_id}->turn_on();
|
||||
# delay(${local_tripleclick_duration});
|
||||
# ${local_relay_id}->turn_off();
|
||||
# # Hold: button held for at least 4 seconds
|
||||
# - timing:
|
||||
# - ON for at least 4s
|
||||
|
||||
## then:
|
||||
# - lambda: |-
|
||||
# ESP_LOGD(${local_gpio}, "Hold detected: turning ",${local_relay_id}," on indefinitely.");
|
||||
# ${local_relay_id}->turn_on();
|
||||
75
esphome/common/network_common.yaml
Normal file
75
esphome/common/network_common.yaml
Normal file
@@ -0,0 +1,75 @@
|
||||
substitutions:
|
||||
##############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
wifi_ssid: !secret ha_wifi_ssid
|
||||
wifi_password: !secret ha_wifi_password
|
||||
fallback_ap_password: !secret fallback_ap_password
|
||||
|
||||
# Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
|
||||
wifi_fast_connect: "false"
|
||||
|
||||
# Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
|
||||
dns_domain: ".local"
|
||||
|
||||
# Automatically add the mac address to the name
|
||||
# eg so you can use a single firmware for all devices
|
||||
add_mac_suffix: "false"
|
||||
|
||||
# Add these if we are giving it a static ip, or remove them in the Wifi section
|
||||
static_ip_subnet: !secret ha_wifi_subnet
|
||||
static_ip_gateway: !secret ha_wifi_gateway
|
||||
static_ip_dns1: !secret ha_wifi_gateway
|
||||
|
||||
#############################################
|
||||
# Common Wifi Settings
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
# NONE (least power saving, Default for ESP8266)
|
||||
# LIGHT (Default for ESP32)
|
||||
# HIGH (most power saving)
|
||||
#############################################
|
||||
wifi:
|
||||
ssid: ${wifi_ssid}
|
||||
password: ${wifi_password}
|
||||
#power_save_mode: LIGHT # https://esphome.io/components/wifi.html#wifi-power-save-mode
|
||||
manual_ip: # optional static IP address
|
||||
static_ip: ${local_static_ip_address}
|
||||
gateway: ${static_ip_gateway}
|
||||
subnet: ${static_ip_subnet}
|
||||
dns1: ${static_ip_dns1}
|
||||
ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
ssid: ${devicename} AP
|
||||
password: ${fallback_ap_password}
|
||||
ap_timeout: 30min # Time until it brings up fallback AP. default is 1min
|
||||
# Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
|
||||
fast_connect: "${wifi_fast_connect}"
|
||||
# Define dns domain / suffix to add to hostname
|
||||
domain: "${dns_domain}"
|
||||
|
||||
captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails
|
||||
|
||||
#############################################
|
||||
# Enable the Home Assistant API
|
||||
# https://esphome.io/components/api.html
|
||||
#############################################
|
||||
api:
|
||||
encryption:
|
||||
key: ${local_api_key}
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
#############################################
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: ${local_ota_pass}
|
||||
|
||||
#############################################
|
||||
# Safe Mode
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
#############################################
|
||||
safe_mode:
|
||||
@@ -0,0 +1,76 @@
|
||||
#substitutions:
|
||||
# local_gpioinvert: "True"
|
||||
# local_singleclick_duration: "300000" # 5 minutes in ms
|
||||
# local_doubleclick_duration: "1800000" # 30 minutes in ms
|
||||
# local_tripleclick_duration: "7200000" # 2 hours in ms
|
||||
|
||||
#globals:
|
||||
# - id: single_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_singleclick_duration}
|
||||
# - id: double_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_doubleclick_duration}
|
||||
# - id: triple_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_tripleclick_duration}
|
||||
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: ${local_gpio}
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: ${local_name}
|
||||
on_multi_click:
|
||||
# Single Click: one press (short press/release)
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
if (id(local_relay_id).state) {
|
||||
ESP_LOGD(id(local_gpio},"Single click: ",id(local_relay_id)," is on, turning it off.");
|
||||
id(local_relay_id).turn_off();
|
||||
} else {
|
||||
ESP_LOGD(id(local_gpio), "Single click: ",id(local_relay_id)," is off, turning it on for %d ms.", id(local_singleclick_duraton));
|
||||
id(local_relay_id).turn_on();
|
||||
delay(id(local_singleclick_duration));
|
||||
id(local_relay_id).turn_off();
|
||||
}
|
||||
# Double Click: two quick press/release cycles
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD(id(local_gpio), "Double click detected: turning ",id(local_relay_id)," on for %d ms.", id(local_doubleclick_duration));
|
||||
id(local_relay_id).turn_on();
|
||||
delay(id(local_doubleclick_duration));
|
||||
id(local_relay_id).turn_off();
|
||||
# Triple Click: three quick press/release cycles
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD(id(local_gpio), "Triple click detected: turning ",id(local_relay_id)," on for %d ms.", id(local_tripleclick_duration));
|
||||
id(local_relay_id).turn_on();
|
||||
delay(id(local_tripleclick_duration));
|
||||
id(local_relay_id).turn_off();
|
||||
# Hold: button held for at least 4 seconds
|
||||
- timing:
|
||||
- ON for at least 4s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD(id(local_gpio), "Hold detected: turning ",id(local_relay_id)," on indefinitely.");
|
||||
id(local_relay_id).turn_on();
|
||||
@@ -0,0 +1,76 @@
|
||||
defaults:
|
||||
local_gpioinvert: "True"
|
||||
local_singleclick_duration: "300000" # 5 minutes in ms
|
||||
local_doubleclick_duration: "1800000" # 30 minutes in ms
|
||||
local_tripleclick_duration: "7200000" # 2 hours in ms
|
||||
|
||||
#globals:
|
||||
# - id: single_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_singleclick_duration}
|
||||
# - id: double_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_doubleclick_duration}
|
||||
# - id: triple_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_tripleclick_duration}
|
||||
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: ${local_gpio}
|
||||
mode: INPUT
|
||||
inverted: ${local_gpioinvert}
|
||||
name: ${local_name}
|
||||
on_multi_click:
|
||||
# Single Click: one press (short press/release)
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
if (id(${local_relay_id}).state) {
|
||||
ESP_LOGD("${local_gpio}", "Single click: ${local_relay_id} is on, turning it off.");
|
||||
id(${local_relay_id}).turn_off();
|
||||
} else {
|
||||
ESP_LOGD("${local_gpio}", "Single click: ${local_relay_id} is off, turning it on for %d ms.", id(single_click_delay));
|
||||
id(${local_relay_id}).turn_on();
|
||||
delay(id(single_click_delay));
|
||||
id(${local_relay_id}).turn_off();
|
||||
}
|
||||
# Double Click: two quick press/release cycles
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD(${local_gpio}, "Double click detected: turning ",${local_relay_id}," on for %d ms.", id(double_click_delay));
|
||||
id(${local_relay_id}).turn_on();
|
||||
delay(id(double_click_delay));
|
||||
id(${local_relay_id}).turn_off();
|
||||
# Triple Click: three quick press/release cycles
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD(${local_gpio}, "Triple click detected: turning ",${local_relay_id}," on for %d ms.", id(triple_click_delay));
|
||||
id(${local_relay_id}).turn_on();
|
||||
delay(id(triple_click_delay));
|
||||
id(${local_relay_id}).turn_off();
|
||||
# Hold: button held for at least 4 seconds
|
||||
- timing:
|
||||
- ON for at least 4s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD(${local_gpio}, "Hold detected (threshold %d ms): turning ",${local_relay_id}," on indefinitely.");
|
||||
id(${local_relay_id}).turn_on();
|
||||
1
esphome/common/secrets copy.yaml
Normal file
1
esphome/common/secrets copy.yaml
Normal file
@@ -0,0 +1 @@
|
||||
<<: !include ../secrets.yaml
|
||||
96
esphome/common/sensors_common.yaml
Normal file
96
esphome/common/sensors_common.yaml
Normal file
@@ -0,0 +1,96 @@
|
||||
#############################################
|
||||
# GENERAL COMMON SENSORS
|
||||
# https://esphome.io/components/sensor/
|
||||
#############################################
|
||||
sensor:
|
||||
- platform: uptime # Uptime for this device in seconds
|
||||
name: "Uptime (s): ${local_friendly_name}"
|
||||
update_interval: ${local_update_interval}
|
||||
id: uptime_sensor
|
||||
entity_category: "diagnostic"
|
||||
- platform: wifi_signal # Wifi Strength
|
||||
name: "Wifi dB: ${local_friendly_name}"
|
||||
id: wifi_signal_db
|
||||
update_interval: ${local_update_interval}
|
||||
entity_category: "diagnostic"
|
||||
- platform: copy # Reports the WiFi signal strength in %
|
||||
source_id: wifi_signal_db
|
||||
name: "WiFi Percent: ${local_friendly_name}"
|
||||
filters:
|
||||
- lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
|
||||
unit_of_measurement: "% Max"
|
||||
entity_category: "diagnostic"
|
||||
device_class: ""
|
||||
|
||||
#############################################
|
||||
# Text Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
#############################################
|
||||
text_sensor:
|
||||
######################################################
|
||||
# General ESPHome Info
|
||||
######################################################
|
||||
- platform: version
|
||||
name: "Version: ${local_friendly_name}"
|
||||
entity_category: "diagnostic"
|
||||
|
||||
- platform: wifi_info
|
||||
ip_address:
|
||||
name: "IP Address: ${local_friendly_name}"
|
||||
|
||||
- platform: uptime # Uptime for this device human readable
|
||||
name: "Uptime: ${local_friendly_name}"
|
||||
icon: mdi:clock-start
|
||||
update_interval: ${local_update_interval}
|
||||
entity_category: "diagnostic"
|
||||
|
||||
######################################################
|
||||
# Creates a sensor showing when the device was last restarted
|
||||
# Uptime template sensor, and SNTP are needed
|
||||
######################################################
|
||||
#- platform: template
|
||||
# name: ${local_friendly_name} Last Restart
|
||||
# id: device_last_restart
|
||||
# icon: mdi:clock
|
||||
# entity_category: diagnostic
|
||||
# #device_class: timestamp
|
||||
|
||||
######################################################
|
||||
# Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
|
||||
######################################################
|
||||
#- platform: template
|
||||
# name: "Uptime"
|
||||
# entity_category: diagnostic
|
||||
# lambda: |-
|
||||
# int seconds = (id(uptime_sensor).state);
|
||||
# int days = seconds / (24 * 3600);
|
||||
# seconds = seconds % (24 * 3600);
|
||||
# int hours = seconds / 3600;
|
||||
# seconds = seconds % 3600;
|
||||
# int minutes = seconds / 60;
|
||||
# seconds = seconds % 60;
|
||||
# if ( days > 3650 ) {
|
||||
# return { "Starting up" };
|
||||
# } else if ( days ) {
|
||||
# return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
|
||||
# } else if ( hours ) {
|
||||
# return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
|
||||
# } else if ( minutes ) {
|
||||
# return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
|
||||
# } else {
|
||||
# return { (String(seconds) +"s").c_str() };
|
||||
# }
|
||||
# icon: mdi:clock-start
|
||||
|
||||
button:
|
||||
- platform: safe_mode
|
||||
name: "Safe Mode Restart: ${local_friendly_name}"
|
||||
entity_category: "diagnostic"
|
||||
- platform: restart
|
||||
name: "Restart: ${local_friendly_name}"
|
||||
entity_category: "diagnostic"
|
||||
disabled_by_default: true
|
||||
- platform: factory_reset
|
||||
name: "FACTORY RESET: ${local_friendly_name}"
|
||||
entity_category: "diagnostic"
|
||||
disabled_by_default: true
|
||||
@@ -137,6 +137,7 @@ mqtt:
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
discovery: False # enable entity discovery (true is default, we don't want two HA Instances)
|
||||
|
||||
# Availability Topic
|
||||
birth_message:
|
||||
|
||||
509
esphome/esp-datapower-a.yaml
Normal file
509
esphome/esp-datapower-a.yaml
Normal file
@@ -0,0 +1,509 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# Data Cupboard Power Monitor A
|
||||
# Athom Smart Plug Power Monitor ESP32-C3
|
||||
#
|
||||
# V1.0 2025-03-13 Initial Version
|
||||
#
|
||||
# based on https://github.com/athom-tech/esp32-configs/blob/main/athom-smart-plug.yaml
|
||||
#
|
||||
# SUMMARY
|
||||
# Smart plug with power moniroting. It has limited ability to
|
||||
# accidentally turn it off as it powers equipment in a data cupboard.
|
||||
# It does have the ability to turn off and back on automatically
|
||||
# a short time later, just in case a remote system reset is needed.
|
||||
# Also, the button on the side can't be bumped, you have to hold
|
||||
# it down for a few seconds to power it off.
|
||||
# The yaml code also calculates various power use summaries.
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
substitutions:
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
devicename: "esp-datapower-a"
|
||||
friendly_name: "Data Cupboard Power Monitor A"
|
||||
description_comment: "Smart plug power Monitor A, Data Cupboard"
|
||||
room: "Data Cupboard" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
api_key: !secret esp-datapower-a_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-datapower-a_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-datapower-a_ip
|
||||
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
|
||||
update_interval: 10s # update time for for general sensors etc
|
||||
|
||||
# Project Details
|
||||
project_name: "Athom Technology.Smart Plug V3"
|
||||
project_version: "v1.0.7" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Restore the relay (GPO switch) upon reboot to state:
|
||||
relay_restore_mode: RESTORE_DEFAULT_ON
|
||||
|
||||
# Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
|
||||
current_limit : "10"
|
||||
|
||||
# Hide the ENERGY sensor that shows kWh consumed, but with no time period associated with it. Resets when device restarted and reflashed.
|
||||
hide_energy_sensor: "true"
|
||||
# Enable or disable the use of IPv6 networking on the device
|
||||
ipv6_enable: "false"
|
||||
# Power plug icon selection. Change to reflect the type/country of powr plug in use, this will update the power plug icon shown next to the switch
|
||||
power_plug_type: "power-socket-au" # Options: power-socket-au | power-socket-ch | power-socket-de | power-socket-eu | power-socket-fr | power-socket-it | power-socket-jp | power-socket-uk | power-socket-us |
|
||||
|
||||
#############################################
|
||||
# SYSTEM SPECIFIC VARIABLE SUBSTITUTIONS
|
||||
#############################################
|
||||
|
||||
timezone: "Pacific/Auckland"
|
||||
sntp_update_interval: 6h # Set the duration between the sntp service polling
|
||||
# Network time servers https://www.ntppool.org/zone/@
|
||||
sntp_server_1: !secret ntp_server_1
|
||||
sntp_server_2: !secret ntp_server_2
|
||||
sntp_server_3: !secret ntp_server_3
|
||||
|
||||
wifi_ssid: !secret ha_wifi_ssid
|
||||
wifi_password: !secret ha_wifi_password
|
||||
fallback_ap_password: !secret fallback_ap_password
|
||||
|
||||
# Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
|
||||
wifi_fast_connect: "false"
|
||||
|
||||
# Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
|
||||
dns_domain: ".local"
|
||||
|
||||
# Automatically add the mac address to the name
|
||||
# eg so you can use a single firmware for all devices
|
||||
add_mac_suffix: "false"
|
||||
|
||||
# Add these if we are giving it a static ip, or remove them in the Wifi section
|
||||
static_ip_subnet: !secret ha_wifi_subnet
|
||||
static_ip_gateway: !secret ha_wifi_gateway
|
||||
|
||||
mqtt_server: !secret ha_mqtt_server
|
||||
mqtt_username: !secret ha_mqtt_username
|
||||
mqtt_password: !secret ha_mqtt_password
|
||||
mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
|
||||
|
||||
# Add these if we are using the internal web server (this is pretty processor intensive)
|
||||
#web_server_username: !secret web_server_username
|
||||
#web_server_password: !secret web_server_password
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
packages:
|
||||
wifi: !include common/wifi_common.yaml
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #Appears on the esphome page in HA
|
||||
area: "${room}"
|
||||
name_add_mac_suffix: "${add_mac_suffix}"
|
||||
min_version: 2024.6.0
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
platformio_options:
|
||||
board_build.mcu: esp32c3
|
||||
board_build.variant: esp32c3
|
||||
board_build.flash_mode: dio
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
#esp8266:
|
||||
# board: esp01_1m # The original sonoff basic
|
||||
esp32:
|
||||
board: esp32-c3-devkitm-1
|
||||
flash_size: 4MB
|
||||
variant: ESP32C3
|
||||
framework:
|
||||
type: arduino
|
||||
version: recommended
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: ${log_level} #INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# Enable the Home Assistant API
|
||||
# https://esphome.io/components/api.html
|
||||
#############################################
|
||||
api:
|
||||
encryption:
|
||||
key: ${api_key}
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
#############################################
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: ${ota_pass}
|
||||
|
||||
#############################################
|
||||
# Safe Mode
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
#############################################
|
||||
safe_mode:
|
||||
|
||||
#############################################
|
||||
# Wifi Settings
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
# NONE (least power saving, Default for ESP8266)
|
||||
# LIGHT (Default for ESP32)
|
||||
# HIGH (most power saving)
|
||||
#############################################
|
||||
##ifi:
|
||||
# ssid: ${wifi_ssid}
|
||||
# password: ${wifi_password}
|
||||
#power_save_mode: LIGHT # https://esphome.io/components/wifi.html#wifi-power-save-mode
|
||||
# manual_ip: # optional static IP address
|
||||
# static_ip: ${static_ip_address}
|
||||
# gateway: ${static_ip_gateway}
|
||||
# subnet: ${static_ip_subnet}
|
||||
# ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
# ssid: ${devicename} AP
|
||||
# password: ${fallback_ap_password}
|
||||
# ap_timeout: 30min # Time until it brings up fallback AP. default is 1min
|
||||
# # Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
|
||||
# fast_connect: "${wifi_fast_connect}"
|
||||
# # Define dns domain / suffix to add to hostname
|
||||
# domain: "${dns_domain}"
|
||||
|
||||
#captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails
|
||||
|
||||
#############################################
|
||||
# Real time clock time source for ESPHome
|
||||
# If it's invalid, we fall back to an internal clock
|
||||
# https://esphome.io/components/time/index.html
|
||||
# https://esphome.io/components/time/sntp
|
||||
#############################################
|
||||
time:
|
||||
- platform: sntp
|
||||
id: sntp_time
|
||||
# Define the timezone of the device
|
||||
timezone: "${timezone}"
|
||||
# Change sync interval from default 5min to 6 hours (or as set in substitutions)
|
||||
update_interval: ${sntp_update_interval}
|
||||
# Set specific sntp servers to use
|
||||
servers:
|
||||
- "${sntp_server_1}"
|
||||
- "${sntp_server_2}"
|
||||
- "${sntp_server_3}"
|
||||
# Publish the time the device was last restarted
|
||||
on_time_sync:
|
||||
then:
|
||||
# Update last restart time, but only once.
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(device_last_restart).state == "";'
|
||||
then:
|
||||
- text_sensor.template.publish:
|
||||
id: device_last_restart
|
||||
state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
|
||||
|
||||
#############################################
|
||||
# MQTT Monitoring
|
||||
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
||||
# MUST also have api enabled if you enable MQTT
|
||||
#############################################
|
||||
mqtt:
|
||||
broker: ${mqtt_server}
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
discovery: false # enable entity discovery (true is default, we don't want two HA Instances)
|
||||
|
||||
#############################################
|
||||
# Web Portal for display and monitoring
|
||||
# Turning this off is maybe a good idea to save resources,
|
||||
# especially on an esp8266.
|
||||
# https://esphome.io/components/web_server.html
|
||||
#############################################
|
||||
#web_server:
|
||||
# port: 80
|
||||
# auth:
|
||||
# username: ${web_server_username} # probably a good idea to secure it
|
||||
# password: ${web_server_password}
|
||||
|
||||
|
||||
|
||||
|
||||
network:
|
||||
enable_ipv6: ${ipv6_enable}
|
||||
|
||||
esp32_improv:
|
||||
authorizer: none
|
||||
|
||||
dashboard_import:
|
||||
package_import_url: github://athom-tech/esp32-configs/athom-smart-plug.yaml
|
||||
|
||||
uart:
|
||||
rx_pin: GPIO20
|
||||
baud_rate: 4800
|
||||
data_bits: 8
|
||||
stop_bits: 1
|
||||
parity: EVEN
|
||||
|
||||
globals:
|
||||
- id: total_energy
|
||||
type: float
|
||||
restore_value: yes
|
||||
initial_value: '0.0'
|
||||
|
||||
# - id: restore_mode
|
||||
# type: int
|
||||
# restore_value: yes
|
||||
# initial_value: "2" # 0 = Always_Off. 1 = Restore_Power_Off. 2 = Always_On.
|
||||
|
||||
binary_sensor:
|
||||
- platform: status
|
||||
name: "Status"
|
||||
icon: mdi:check-network-outline
|
||||
entity_category: diagnostic
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO3
|
||||
mode: INPUT_PULLUP
|
||||
inverted: true
|
||||
name: "Power Button"
|
||||
id: power_button
|
||||
disabled_by_default: true
|
||||
on_multi_click:
|
||||
- timing:
|
||||
- ON for at most 10s
|
||||
- OFF for at least 2s
|
||||
then:
|
||||
- switch.toggle: relay
|
||||
# - timing:
|
||||
# - ON for at least 4s
|
||||
# then:
|
||||
# - button.press: Reset
|
||||
|
||||
- platform: template
|
||||
name: "Relay Status"
|
||||
lambda: |-
|
||||
return id(relay).state;
|
||||
|
||||
sensor:
|
||||
- platform: uptime
|
||||
name: "Uptime Sensor"
|
||||
id: uptime_sensor
|
||||
entity_category: diagnostic
|
||||
internal: true
|
||||
|
||||
- platform: wifi_signal
|
||||
name: "WiFi Signal dB"
|
||||
id: wifi_signal_db
|
||||
update_interval: 60s
|
||||
entity_category: "diagnostic"
|
||||
|
||||
- platform: copy
|
||||
source_id: wifi_signal_db
|
||||
name: "WiFi Signal Percent"
|
||||
filters:
|
||||
- lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
|
||||
unit_of_measurement: "Signal %"
|
||||
entity_category: "diagnostic"
|
||||
device_class: ""
|
||||
|
||||
- platform: cse7766
|
||||
id: athom_cse7766
|
||||
current:
|
||||
name: "Current"
|
||||
icon: mdi:current-ac
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
- lambda: if (x < 0.060) return 0.0; else return x; #For the chip will report less than 3w power when no load is connected
|
||||
on_value_range:
|
||||
- above: ${current_limit}
|
||||
then:
|
||||
- switch.turn_off: relay
|
||||
|
||||
voltage:
|
||||
name: "Voltage"
|
||||
icon: mdi:sine-wave
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
|
||||
power:
|
||||
name: "Power"
|
||||
id: power_sensor
|
||||
icon: mdi:power
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
- lambda: if (x < 3.0) return 0.0; else return x; #For the chip will report less than 3w power when no load is connected
|
||||
|
||||
energy:
|
||||
name: "Energy"
|
||||
id: energy
|
||||
icon: mdi:lightning-bolt
|
||||
unit_of_measurement: kWh
|
||||
filters:
|
||||
- throttle: ${update_interval}
|
||||
# Multiplication factor from W to kW is 0.001
|
||||
- multiply: 0.001
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
static float previous_energy_value = 0.0;
|
||||
float current_energy_value = id(energy).state;
|
||||
id(total_energy) += current_energy_value - previous_energy_value;
|
||||
previous_energy_value = current_energy_value;
|
||||
id(total_energy_sensor).update();
|
||||
|
||||
apparent_power:
|
||||
name: "Apparent Power"
|
||||
icon: mdi:power
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
|
||||
reactive_power:
|
||||
name: "Reactive Power"
|
||||
icon: mdi:flash
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
|
||||
power_factor:
|
||||
name: "Power Factor"
|
||||
icon: mdi:percent-outline
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
|
||||
- platform: template
|
||||
name: "Total Energy"
|
||||
id: total_energy_sensor
|
||||
unit_of_measurement: kWh
|
||||
device_class: "energy"
|
||||
state_class: "total_increasing"
|
||||
icon: mdi:lightning-bolt
|
||||
accuracy_decimals: 3
|
||||
lambda: |-
|
||||
return id(total_energy);
|
||||
update_interval: ${update_interval}
|
||||
|
||||
- platform: total_daily_energy
|
||||
name: "Total Daily Energy"
|
||||
restore: true
|
||||
power_id: power_sensor
|
||||
unit_of_measurement: kWh
|
||||
icon: mdi:hours-24
|
||||
accuracy_decimals: 3
|
||||
filters:
|
||||
- multiply: 0.001
|
||||
|
||||
button:
|
||||
# - platform: restart
|
||||
# name: "Restart"
|
||||
# entity_category: config
|
||||
|
||||
# - platform: factory_reset
|
||||
# name: "Factory Reset"
|
||||
# id: Reset
|
||||
# entity_category: config
|
||||
|
||||
# - platform: safe_mode
|
||||
# name: "Safe Mode"
|
||||
# internal: false
|
||||
# entity_category: config
|
||||
|
||||
- platform: template
|
||||
name: "Turn Off Relay Temporarily"
|
||||
on_press:
|
||||
then:
|
||||
- switch.turn_off: relay
|
||||
- delay: 5s
|
||||
- switch.turn_on: relay
|
||||
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Switch"
|
||||
pin: GPIO5
|
||||
id: relay
|
||||
restore_mode: ALWAYS_ON # Ensures the relay is on at boot
|
||||
internal: true # Hides the switch from Home Assistant
|
||||
#icon: mdi:${power_plug_type} # Don't need an icon if we can't see it...
|
||||
|
||||
light:
|
||||
- platform: status_led
|
||||
name: "Status LED"
|
||||
id: blue_led
|
||||
icon: mdi:lightbulb-outline
|
||||
disabled_by_default: false
|
||||
pin:
|
||||
inverted: true
|
||||
number: GPIO6
|
||||
|
||||
text_sensor:
|
||||
- platform: wifi_info
|
||||
ip_address:
|
||||
name: "IP Address"
|
||||
icon: mdi:ip-network
|
||||
entity_category: diagnostic
|
||||
ssid:
|
||||
name: "Connected SSID"
|
||||
icon: mdi:wifi-strength-2
|
||||
entity_category: diagnostic
|
||||
mac_address:
|
||||
name: "Mac Address"
|
||||
icon: mdi:network-pos
|
||||
entity_category: diagnostic
|
||||
|
||||
# Creates a sensor showing when the device was last restarted
|
||||
- platform: template
|
||||
name: 'Last Restart'
|
||||
id: device_last_restart
|
||||
icon: mdi:clock
|
||||
entity_category: diagnostic
|
||||
# device_class: timestamp
|
||||
|
||||
# Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
|
||||
- platform: template
|
||||
name: "Uptime"
|
||||
entity_category: diagnostic
|
||||
lambda: |-
|
||||
int seconds = (id(uptime_sensor).state);
|
||||
int days = seconds / (24 * 3600);
|
||||
seconds = seconds % (24 * 3600);
|
||||
int hours = seconds / 3600;
|
||||
seconds = seconds % 3600;
|
||||
int minutes = seconds / 60;
|
||||
seconds = seconds % 60;
|
||||
if ( days > 3650 ) {
|
||||
return { "Starting up" };
|
||||
} else if ( days ) {
|
||||
return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
|
||||
} else if ( hours ) {
|
||||
return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
|
||||
} else if ( minutes ) {
|
||||
return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
|
||||
} else {
|
||||
return { (String(seconds) +"s").c_str() };
|
||||
}
|
||||
icon: mdi:clock-start
|
||||
|
||||
504
esphome/esp-datapower-b.yaml
Normal file
504
esphome/esp-datapower-b.yaml
Normal file
@@ -0,0 +1,504 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# Data Cupboard Power Monitor B
|
||||
# Athom Smart Plug Power Monitor ESP32-C3
|
||||
#
|
||||
# V1.0 2025-03-13 Initial Version
|
||||
#
|
||||
# based on https://github.com/athom-tech/esp32-configs/blob/main/athom-smart-plug.yaml
|
||||
#
|
||||
# SUMMARY
|
||||
# Smart plug with power moniroting. It has limited ability to
|
||||
# accidentally turn it off as it powers equipment in a data cupboard.
|
||||
# It does have the ability to turn off and back on automatically
|
||||
# a short time later, just in case a remote system reset is needed.
|
||||
# Also, the button on the side can't be bumped, you have to hold
|
||||
# it down for a few seconds to power it off.
|
||||
# The yaml code also calculates various power use summaries.
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
substitutions:
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
devicename: "esp-datapower-b"
|
||||
friendly_name: "Data Cupboard Power Monitor B"
|
||||
description_comment: "Smart plug power Monitor B, Data Cupboard"
|
||||
room: "Data Cupboard" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
api_key: !secret esp-datapower-b_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-datapower-b_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-datapower-b_ip
|
||||
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
|
||||
update_interval: 10s # update time for for general sensors etc
|
||||
|
||||
# Project Details
|
||||
project_name: "Athom Technology.Smart Plug V3"
|
||||
project_version: "v1.0.7" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Restore the relay (GPO switch) upon reboot to state:
|
||||
relay_restore_mode: RESTORE_DEFAULT_ON
|
||||
|
||||
# Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
|
||||
current_limit : "10"
|
||||
|
||||
# Hide the ENERGY sensor that shows kWh consumed, but with no time period associated with it. Resets when device restarted and reflashed.
|
||||
hide_energy_sensor: "true"
|
||||
# Enable or disable the use of IPv6 networking on the device
|
||||
ipv6_enable: "false"
|
||||
# Power plug icon selection. Change to reflect the type/country of powr plug in use, this will update the power plug icon shown next to the switch
|
||||
power_plug_type: "power-socket-au" # Options: power-socket-au | power-socket-ch | power-socket-de | power-socket-eu | power-socket-fr | power-socket-it | power-socket-jp | power-socket-uk | power-socket-us |
|
||||
|
||||
|
||||
|
||||
#############################################
|
||||
# SYSTEM SPECIFIC VARIABLE SUBSTITUTIONS
|
||||
#############################################
|
||||
|
||||
timezone: "Pacific/Auckland"
|
||||
sntp_update_interval: 6h # Set the duration between the sntp service polling
|
||||
# Network time servers https://www.ntppool.org/zone/@
|
||||
sntp_server_1: !secret ntp_server_1
|
||||
sntp_server_2: !secret ntp_server_2
|
||||
sntp_server_3: !secret ntp_server_3
|
||||
|
||||
wifi_ssid: !secret ha_wifi_ssid
|
||||
wifi_password: !secret ha_wifi_password
|
||||
fallback_ap_password: !secret fallback_ap_password
|
||||
|
||||
# Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
|
||||
wifi_fast_connect: "false"
|
||||
|
||||
# Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
|
||||
dns_domain: ".local"
|
||||
|
||||
# Automatically add the mac address to the name
|
||||
# eg so you can use a single firmware for all devices
|
||||
add_mac_suffix: "false"
|
||||
|
||||
# Add these if we are giving it a static ip, or remove them in the Wifi section
|
||||
static_ip_subnet: !secret ha_wifi_subnet
|
||||
static_ip_gateway: !secret ha_wifi_gateway
|
||||
|
||||
mqtt_server: !secret ha_mqtt_server
|
||||
mqtt_username: !secret ha_mqtt_username
|
||||
mqtt_password: !secret ha_mqtt_password
|
||||
mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
|
||||
|
||||
# Add these if we are using the internal web server (this is pretty processor intensive)
|
||||
#web_server_username: !secret web_server_username
|
||||
#web_server_password: !secret web_server_password
|
||||
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #Appears on the esphome page in HA
|
||||
area: "${room}"
|
||||
name_add_mac_suffix: "${add_mac_suffix}"
|
||||
min_version: 2024.6.0
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
platformio_options:
|
||||
board_build.mcu: esp32c3
|
||||
board_build.variant: esp32c3
|
||||
board_build.flash_mode: dio
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
#esp8266:
|
||||
# board: esp01_1m # The original sonoff basic
|
||||
esp32:
|
||||
board: esp32-c3-devkitm-1
|
||||
flash_size: 4MB
|
||||
variant: ESP32C3
|
||||
framework:
|
||||
type: arduino
|
||||
version: recommended
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: ${log_level} #INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# Enable the Home Assistant API
|
||||
# https://esphome.io/components/api.html
|
||||
#############################################
|
||||
api:
|
||||
encryption:
|
||||
key: ${api_key}
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
#############################################
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: ${ota_pass}
|
||||
|
||||
#############################################
|
||||
# Safe Mode
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
#############################################
|
||||
safe_mode:
|
||||
|
||||
#############################################
|
||||
# Wifi Settings
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
# NONE (least power saving, Default for ESP8266)
|
||||
# LIGHT (Default for ESP32)
|
||||
# HIGH (most power saving)
|
||||
#############################################
|
||||
wifi:
|
||||
ssid: ${wifi_ssid}
|
||||
password: ${wifi_password}
|
||||
#power_save_mode: LIGHT # https://esphome.io/components/wifi.html#wifi-power-save-mode
|
||||
manual_ip: # optional static IP address
|
||||
static_ip: ${static_ip_address}
|
||||
gateway: ${static_ip_gateway}
|
||||
subnet: ${static_ip_subnet}
|
||||
ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
ssid: ${devicename} AP
|
||||
password: ${fallback_ap_password}
|
||||
ap_timeout: 30min # Time until it brings up fallback AP. default is 1min
|
||||
# Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
|
||||
fast_connect: "${wifi_fast_connect}"
|
||||
# Define dns domain / suffix to add to hostname
|
||||
domain: "${dns_domain}"
|
||||
|
||||
captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails
|
||||
|
||||
#############################################
|
||||
# Real time clock time source for ESPHome
|
||||
# If it's invalid, we fall back to an internal clock
|
||||
# https://esphome.io/components/time/index.html
|
||||
# https://esphome.io/components/time/sntp
|
||||
#############################################
|
||||
time:
|
||||
- platform: sntp
|
||||
id: sntp_time
|
||||
# Define the timezone of the device
|
||||
timezone: "${timezone}"
|
||||
# Change sync interval from default 5min to 6 hours (or as set in substitutions)
|
||||
update_interval: ${sntp_update_interval}
|
||||
# Set specific sntp servers to use
|
||||
servers:
|
||||
- "${sntp_server_1}"
|
||||
- "${sntp_server_2}"
|
||||
- "${sntp_server_3}"
|
||||
# Publish the time the device was last restarted
|
||||
on_time_sync:
|
||||
then:
|
||||
# Update last restart time, but only once.
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(device_last_restart).state == "";'
|
||||
then:
|
||||
- text_sensor.template.publish:
|
||||
id: device_last_restart
|
||||
state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
|
||||
|
||||
#############################################
|
||||
# MQTT Monitoring
|
||||
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
||||
# MUST also have api enabled if you enable MQTT
|
||||
#############################################
|
||||
mqtt:
|
||||
broker: ${mqtt_server}
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
discovery: False # enable entity discovery (true is default, we don't want two HA Instances)
|
||||
|
||||
#############################################
|
||||
# Web Portal for display and monitoring
|
||||
# Turning this off is maybe a good idea to save resources,
|
||||
# especially on an esp8266.
|
||||
# https://esphome.io/components/web_server.html
|
||||
#############################################
|
||||
#web_server:
|
||||
# port: 80
|
||||
# auth:
|
||||
# username: ${web_server_username} # probably a good idea to secure it
|
||||
# password: ${web_server_password}
|
||||
|
||||
|
||||
|
||||
|
||||
network:
|
||||
enable_ipv6: ${ipv6_enable}
|
||||
|
||||
esp32_improv:
|
||||
authorizer: none
|
||||
|
||||
dashboard_import:
|
||||
package_import_url: github://athom-tech/esp32-configs/athom-smart-plug.yaml
|
||||
|
||||
uart:
|
||||
rx_pin: GPIO20
|
||||
baud_rate: 4800
|
||||
data_bits: 8
|
||||
stop_bits: 1
|
||||
parity: EVEN
|
||||
|
||||
globals:
|
||||
- id: total_energy
|
||||
type: float
|
||||
restore_value: yes
|
||||
initial_value: '0.0'
|
||||
|
||||
# - id: restore_mode
|
||||
# type: int
|
||||
# restore_value: yes
|
||||
# initial_value: "2" # 0 = Always_Off. 1 = Restore_Power_Off. 2 = Always_On.
|
||||
|
||||
binary_sensor:
|
||||
- platform: status
|
||||
name: "Status"
|
||||
icon: mdi:check-network-outline
|
||||
entity_category: diagnostic
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO3
|
||||
mode: INPUT_PULLUP
|
||||
inverted: true
|
||||
name: "Power Button"
|
||||
id: power_button
|
||||
disabled_by_default: true
|
||||
on_multi_click:
|
||||
- timing:
|
||||
- ON for at most 10s
|
||||
- OFF for at least 2s
|
||||
then:
|
||||
- switch.toggle: relay
|
||||
# - timing:
|
||||
# - ON for at least 4s
|
||||
# then:
|
||||
# - button.press: Reset
|
||||
|
||||
- platform: template
|
||||
name: "Relay Status"
|
||||
lambda: |-
|
||||
return id(relay).state;
|
||||
|
||||
sensor:
|
||||
- platform: uptime
|
||||
name: "Uptime Sensor"
|
||||
id: uptime_sensor
|
||||
entity_category: diagnostic
|
||||
internal: true
|
||||
|
||||
- platform: wifi_signal
|
||||
name: "WiFi Signal dB"
|
||||
id: wifi_signal_db
|
||||
update_interval: 60s
|
||||
entity_category: "diagnostic"
|
||||
|
||||
- platform: copy
|
||||
source_id: wifi_signal_db
|
||||
name: "WiFi Signal Percent"
|
||||
filters:
|
||||
- lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
|
||||
unit_of_measurement: "Signal %"
|
||||
entity_category: "diagnostic"
|
||||
device_class: ""
|
||||
|
||||
- platform: cse7766
|
||||
id: athom_cse7766
|
||||
current:
|
||||
name: "Current"
|
||||
icon: mdi:current-ac
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
- lambda: if (x < 0.060) return 0.0; else return x; #For the chip will report less than 3w power when no load is connected
|
||||
on_value_range:
|
||||
- above: ${current_limit}
|
||||
then:
|
||||
- switch.turn_off: relay
|
||||
|
||||
voltage:
|
||||
name: "Voltage"
|
||||
icon: mdi:sine-wave
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
|
||||
power:
|
||||
name: "Power"
|
||||
id: power_sensor
|
||||
icon: mdi:power
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
- lambda: if (x < 3.0) return 0.0; else return x; #For the chip will report less than 3w power when no load is connected
|
||||
|
||||
energy:
|
||||
name: "Energy"
|
||||
id: energy
|
||||
icon: mdi:lightning-bolt
|
||||
unit_of_measurement: kWh
|
||||
filters:
|
||||
- throttle: ${update_interval}
|
||||
# Multiplication factor from W to kW is 0.001
|
||||
- multiply: 0.001
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
static float previous_energy_value = 0.0;
|
||||
float current_energy_value = id(energy).state;
|
||||
id(total_energy) += current_energy_value - previous_energy_value;
|
||||
previous_energy_value = current_energy_value;
|
||||
id(total_energy_sensor).update();
|
||||
|
||||
apparent_power:
|
||||
name: "Apparent Power"
|
||||
icon: mdi:power
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
|
||||
reactive_power:
|
||||
name: "Reactive Power"
|
||||
icon: mdi:flash
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
|
||||
power_factor:
|
||||
name: "Power Factor"
|
||||
icon: mdi:percent-outline
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
|
||||
- platform: template
|
||||
name: "Total Energy"
|
||||
id: total_energy_sensor
|
||||
unit_of_measurement: kWh
|
||||
device_class: "energy"
|
||||
state_class: "total_increasing"
|
||||
icon: mdi:lightning-bolt
|
||||
accuracy_decimals: 3
|
||||
lambda: |-
|
||||
return id(total_energy);
|
||||
update_interval: ${update_interval}
|
||||
|
||||
- platform: total_daily_energy
|
||||
name: "Total Daily Energy"
|
||||
restore: true
|
||||
power_id: power_sensor
|
||||
unit_of_measurement: kWh
|
||||
icon: mdi:hours-24
|
||||
accuracy_decimals: 3
|
||||
filters:
|
||||
- multiply: 0.001
|
||||
|
||||
button:
|
||||
# - platform: restart
|
||||
# name: "Restart"
|
||||
# entity_category: config
|
||||
|
||||
# - platform: factory_reset
|
||||
# name: "Factory Reset"
|
||||
# id: Reset
|
||||
# entity_category: config
|
||||
|
||||
# - platform: safe_mode
|
||||
# name: "Safe Mode"
|
||||
# internal: false
|
||||
# entity_category: config
|
||||
|
||||
- platform: template
|
||||
name: "Turn Off Relay Temporarily"
|
||||
on_press:
|
||||
then:
|
||||
- switch.turn_off: relay
|
||||
- delay: 5s
|
||||
- switch.turn_on: relay
|
||||
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Switch"
|
||||
pin: GPIO5
|
||||
id: relay
|
||||
restore_mode: ALWAYS_ON # Ensures the relay is on at boot
|
||||
internal: true # Hides the switch from Home Assistant
|
||||
#icon: mdi:${power_plug_type} # Don't need an icon if we can't see it...
|
||||
|
||||
light:
|
||||
- platform: status_led
|
||||
name: "Status LED"
|
||||
id: blue_led
|
||||
icon: mdi:lightbulb-outline
|
||||
disabled_by_default: false
|
||||
pin:
|
||||
inverted: true
|
||||
number: GPIO6
|
||||
|
||||
text_sensor:
|
||||
- platform: wifi_info
|
||||
ip_address:
|
||||
name: "IP Address"
|
||||
icon: mdi:ip-network
|
||||
entity_category: diagnostic
|
||||
ssid:
|
||||
name: "Connected SSID"
|
||||
icon: mdi:wifi-strength-2
|
||||
entity_category: diagnostic
|
||||
mac_address:
|
||||
name: "Mac Address"
|
||||
icon: mdi:network-pos
|
||||
entity_category: diagnostic
|
||||
|
||||
# Creates a sensor showing when the device was last restarted
|
||||
- platform: template
|
||||
name: 'Last Restart'
|
||||
id: device_last_restart
|
||||
icon: mdi:clock
|
||||
entity_category: diagnostic
|
||||
# device_class: timestamp
|
||||
|
||||
# Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
|
||||
- platform: template
|
||||
name: "Uptime"
|
||||
entity_category: diagnostic
|
||||
lambda: |-
|
||||
int seconds = (id(uptime_sensor).state);
|
||||
int days = seconds / (24 * 3600);
|
||||
seconds = seconds % (24 * 3600);
|
||||
int hours = seconds / 3600;
|
||||
seconds = seconds % 3600;
|
||||
int minutes = seconds / 60;
|
||||
seconds = seconds % 60;
|
||||
if ( days > 3650 ) {
|
||||
return { "Starting up" };
|
||||
} else if ( days ) {
|
||||
return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
|
||||
} else if ( hours ) {
|
||||
return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
|
||||
} else if ( minutes ) {
|
||||
return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
|
||||
} else {
|
||||
return { (String(seconds) +"s").c_str() };
|
||||
}
|
||||
icon: mdi:clock-start
|
||||
@@ -10,27 +10,14 @@
|
||||
# INSTRUCTIONS
|
||||
# -
|
||||
#
|
||||
# MQTT Commands
|
||||
# Values will be set in place on the update_interval time, not immediately
|
||||
# Use 00:00 in 24hr format for time setting. Note there is no weekday/weekend setting
|
||||
# mqtt_timer_topic/morning-on/06:00 : Time towel rail will go on
|
||||
# mqtt_timer_topic/morning-off/08:00 : Time towel rail will go off
|
||||
# mqtt_timer_topic/evening-on/09:00 : Time towel rail will go on
|
||||
# mqtt_timer_topic/evening-off/00:00 : Time towel rail will go off
|
||||
# mqtt_timer_topic/operation/ON : Towel rail permanently on
|
||||
# mqtt_timer_topic/operation/OFF : Towel rail permanently off
|
||||
# mqtt_timer_topic/operation/TIMER : Towel rail will obey timer settings
|
||||
# mqtt_timer_topic/operation/STARTUP : Turn on for 2 hours then TIMER (also on startup)
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
substitutions:
|
||||
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
devicename: "esp-downstbathswitch"
|
||||
friendly_name: "Downstairs Bath Lightswitch"
|
||||
description_comment: "Downstairs Bathroom Main Lightswitch using a Zemismart KS-811 Triple Push Button. Main Light (1), Cabinet Light (2), Extract Fan (3)"
|
||||
@@ -39,35 +26,45 @@ substitutions:
|
||||
ota_pass: !secret esp-downstbathswitch_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-downstbathswitch_ip
|
||||
|
||||
#mqtt_timer_topic: "viewroad-commands/masterbath-towelrail" # Topics you will use to change stuff
|
||||
#startup_duration: "120" # Minutes to stay ON in STARTUP mode before reverting to TIMER
|
||||
#timezone: "Pacific/Auckland" # For setting clock with snmp
|
||||
|
||||
|
||||
#############################################
|
||||
# MY SYSTEM VARIABLE SUBSTITUTIONS
|
||||
#############################################
|
||||
wifi_ssid: !secret ha_wifi_ssid
|
||||
wifi_password: !secret ha_wifi_password
|
||||
fallback_ap_password: !secret fallback_ap_password
|
||||
|
||||
# Add these if we are giving it a static ip, or remove them in the Wifi section
|
||||
static_ip_subnet: !secret ha_wifi_subnet
|
||||
static_ip_gateway: !secret ha_wifi_gateway
|
||||
|
||||
mqtt_server: !secret ha_mqtt_server
|
||||
mqtt_username: !secret ha_mqtt_username
|
||||
mqtt_password: !secret ha_mqtt_password
|
||||
mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
|
||||
|
||||
# Add these if we are using the internal web server (this is pretty processor intensive)
|
||||
#web_server_username: !secret web_server_username
|
||||
#web_server_password: !secret web_server_password
|
||||
|
||||
update_interval: 60s # update time for for general sensors etc
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_api_key: ${api_key}
|
||||
local_ota_pass: ${ota_pass}
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
|
||||
|
||||
# common_multiclick_pushbutton_Switch_2: !include
|
||||
# file: common/multiclick_pushbutton_common.yaml
|
||||
# vars:
|
||||
# local_name: "Button: Light Switch 2 (Cabinet)"
|
||||
# local_gpio: GPIO05 # Switch 2 for KS-811 Triple is GPIO5
|
||||
# local_relay_id: Relay_2 # ID of relay to turn on
|
||||
# local_singleclick_duration: 7200000 # 2 hrs in ms
|
||||
# common_multiclick_pushbutton_Switch_3: !include
|
||||
# file: common/multiclick_pushbutton_common.yaml
|
||||
# vars:
|
||||
# local_name: "Button: Extract Fan"
|
||||
# local_gpio: GPIO04 # Switch 3 for KS-811 Triple is GPIO4
|
||||
# local_relay_id: Relay_3 # ID of relay to turn on
|
||||
# local_singleclick_duration: 300000 # 5 minutes in ms
|
||||
# local_doubleclick_duration: 1800000 # 30 minutes in ms
|
||||
# local_tripleclick_duration: 7200000 # 2 hours in ms
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
@@ -76,14 +73,13 @@ esphome:
|
||||
name: ${devicename}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #Appears on the esphome page in HA
|
||||
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp8266:
|
||||
board: esp01_1m # The original sonoff basic
|
||||
board: esp01_1m
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
@@ -95,52 +91,6 @@ logger:
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# Enable the Home Assistant API
|
||||
# https://esphome.io/components/api.html
|
||||
#############################################
|
||||
api:
|
||||
encryption:
|
||||
key: ${api_key}
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
#############################################
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: ${ota_pass}
|
||||
|
||||
#############################################
|
||||
# Safe Mode
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
#############################################
|
||||
safe_mode:
|
||||
|
||||
#############################################
|
||||
# Wifi Settings
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
# NONE (least power saving, Default for ESP8266)
|
||||
# LIGHT (Default for ESP32)
|
||||
# HIGH (most power saving)
|
||||
#############################################
|
||||
wifi:
|
||||
ssid: ${wifi_ssid}
|
||||
password: ${wifi_password}
|
||||
#power_save_mode: LIGHT # https://esphome.io/components/wifi.html#wifi-power-save-mode
|
||||
manual_ip: # optional static IP address
|
||||
static_ip: ${static_ip_address}
|
||||
gateway: ${static_ip_gateway}
|
||||
subnet: ${static_ip_subnet}
|
||||
ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
ssid: ${devicename} AP
|
||||
password: ${fallback_ap_password}
|
||||
ap_timeout: 30min # Time until it brings up fallback AP. default is 1min
|
||||
|
||||
captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails
|
||||
|
||||
#############################################
|
||||
# Real time clock time source for ESPHome
|
||||
@@ -152,35 +102,6 @@ time:
|
||||
- platform: sntp
|
||||
id: sntp_time
|
||||
|
||||
#############################################
|
||||
# MQTT Monitoring
|
||||
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
||||
# MUST also have api enabled if you enable MQTT
|
||||
#############################################
|
||||
mqtt:
|
||||
broker: ${mqtt_server}
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
#discovery: True # enable entity discovery (true is default)
|
||||
#discover_ip: True # enable device discovery (true is default)
|
||||
|
||||
#############################################
|
||||
# Global Variables for use in automations etc
|
||||
# https://esphome.io/guides/automations.html?highlight=globals#global-variables
|
||||
#############################################
|
||||
#globals:
|
||||
|
||||
#############################################
|
||||
# TEXT SENSORS
|
||||
# https://esphome.io/components/text_sensor/
|
||||
#############################################
|
||||
text_sensor:
|
||||
- platform: version
|
||||
name: ${friendly_name} Version
|
||||
- platform: wifi_info
|
||||
ip_address:
|
||||
name: ${friendly_name} IP Address
|
||||
|
||||
#############################################
|
||||
# STATUS LED
|
||||
@@ -191,6 +112,7 @@ status_led:
|
||||
number: GPIO2
|
||||
inverted: yes
|
||||
|
||||
|
||||
#############################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
@@ -201,25 +123,107 @@ binary_sensor:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Light Switch 1 (Main)"
|
||||
name: "Button: Light Switch 1 (Main)"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Light Switch 2 (Cabinet)"
|
||||
name: "Button: Light Switch 2 (Cabinet)"
|
||||
on_press:
|
||||
- switch.toggle: Relay_2
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO04
|
||||
number: GPIO4
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Extract Fan"
|
||||
on_press:
|
||||
- switch.toggle: Relay_3
|
||||
name: "Button: Light Switch 3 (Fan)"
|
||||
on_multi_click:
|
||||
# Single click: 1 press → relay on for 5 minutes
|
||||
- timing:
|
||||
- ON for at most 0.5s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(Relay_3).state;'
|
||||
then:
|
||||
- switch.turn_off: Relay_3
|
||||
else:
|
||||
- switch.turn_on: Relay_3
|
||||
- delay: 5min
|
||||
- switch.turn_off: Relay_3
|
||||
|
||||
# Double click: 2 presses → relay on for 30 minutes
|
||||
- timing:
|
||||
- ON for at most 0.5s
|
||||
- OFF for at most 0.5s
|
||||
- ON for at most 0.5s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(Relay_3).state;'
|
||||
then:
|
||||
- switch.turn_off: Relay_3
|
||||
else:
|
||||
- switch.turn_on: Relay_3
|
||||
- delay: 30min
|
||||
- switch.turn_off: Relay_3
|
||||
|
||||
# Triple click: 3 presses → relay on for 4 hours
|
||||
- timing:
|
||||
- ON for at most 0.5s
|
||||
- OFF for at most 0.5s
|
||||
- ON for at most 0.5s
|
||||
- OFF for at most 0.5s
|
||||
- ON for at most 0.5s
|
||||
- OFF for at least 0.2s
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(Relay_3).state;'
|
||||
then:
|
||||
- switch.turn_off: Relay_3
|
||||
else:
|
||||
- switch.turn_on: Relay_3
|
||||
- delay: 4h
|
||||
- switch.turn_off: Relay_3
|
||||
|
||||
# Hold: pressed for 1 second or more → relay toggles permanently
|
||||
- timing:
|
||||
- ON for at least 2s
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(Relay_3).state;'
|
||||
then:
|
||||
- switch.turn_off: Relay_3
|
||||
else:
|
||||
- switch.turn_on: Relay_3
|
||||
|
||||
# - platform: gpio
|
||||
# pin:
|
||||
# number: GPIO04
|
||||
# mode: INPUT
|
||||
# inverted: True
|
||||
# name: "Button: Light Switch 3 (Fan)"
|
||||
# on_press:
|
||||
# - switch.toggle: Relay_3
|
||||
|
||||
# - platform: gpio
|
||||
# pin:
|
||||
# number: GPIO05
|
||||
# mode: INPUT
|
||||
# inverted: True
|
||||
# name: "Button: Light Switch 2 (Cabinet)"
|
||||
# on_press:
|
||||
# - switch.toggle: Relay_2
|
||||
|
||||
|
||||
#############################################
|
||||
# SWITCH COMPONENT
|
||||
@@ -227,38 +231,16 @@ binary_sensor:
|
||||
#############################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Main Light"
|
||||
name: "Relay: Main Light"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
- platform: gpio
|
||||
name: "Cabinet Light"
|
||||
name: "Relay: Cabinet Light"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
- platform: gpio
|
||||
name: "Extract Fan"
|
||||
name: "Relay: Extract Fan"
|
||||
pin: GPIO14
|
||||
id: Relay_3
|
||||
|
||||
#############################################
|
||||
# GENERAL SENSORS
|
||||
# https://esphome.io/components/sensor/
|
||||
#############################################
|
||||
sensor:
|
||||
- platform: uptime # Uptime for this device
|
||||
name: ${friendly_name} Uptime
|
||||
update_interval: ${update_interval}
|
||||
entity_category: "diagnostic"
|
||||
- platform: wifi_signal # Wifi Strength
|
||||
name: ${friendly_name} Wifi Signal dB
|
||||
id: wifi_signal_db
|
||||
update_interval: ${update_interval}
|
||||
entity_category: "diagnostic"
|
||||
- platform: copy # Reports the WiFi signal strength in %
|
||||
source_id: wifi_signal_db
|
||||
name: ${friendly_name} WiFi Signal Percent
|
||||
filters:
|
||||
- lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
|
||||
unit_of_measurement: "Signal %"
|
||||
entity_category: "diagnostic"
|
||||
device_class: ""
|
||||
|
||||
|
||||
215
esphome/esp-downstbathswitch.yaml.changes
Normal file
215
esphome/esp-downstbathswitch.yaml.changes
Normal file
@@ -0,0 +1,215 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# DOWNSTAIRS BATHROOM MAIN LIGHTSWITCH
|
||||
# Zemismart KS-811 Triple push button
|
||||
#
|
||||
# V1.0 2025-02-14 Initial Version
|
||||
#
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# INSTRUCTIONS
|
||||
# -
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
substitutions:
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
devicename: "esp-downstbathswitch"
|
||||
friendly_name: "Downstairs Bath Lightswitch"
|
||||
description_comment: "Downstairs Bathroom Main Lightswitch using a Zemismart KS-811 Triple Push Button. Main Light (1), Cabinet Light (2), Extract Fan (3)"
|
||||
|
||||
api_key: !secret esp-downstbathswitch_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-downstbathswitch_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-downstbathswitch_ip
|
||||
|
||||
update_interval: 60s # update time for for general sensors etc
|
||||
hold_threshold: "4000ms" # Hold threshold as a compile-time constant
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_api_key: ${api_key}
|
||||
local_ota_pass: ${ota_pass}
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #Appears on the esphome page in HA
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: INFO #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
|
||||
#############################################
|
||||
# Real time clock time source for ESPHome
|
||||
# If it's invalid, we fall back to an internal clock
|
||||
# https://esphome.io/components/time/
|
||||
# https://esphome.io/components/time/sntp
|
||||
#############################################
|
||||
time:
|
||||
- platform: sntp
|
||||
id: sntp_time
|
||||
|
||||
|
||||
#############################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#############################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: yes
|
||||
|
||||
globals:
|
||||
- id: single_click_delay
|
||||
type: long
|
||||
restore_value: no
|
||||
initial_value: '300000' # 5 minutes in ms
|
||||
- id: double_click_delay
|
||||
type: long
|
||||
restore_value: no
|
||||
initial_value: '1800000' # 30 minutes in ms
|
||||
- id: triple_click_delay
|
||||
type: long
|
||||
restore_value: no
|
||||
initial_value: '7200000' # 2 hours in ms
|
||||
- id: hold_threshold_val
|
||||
type: long
|
||||
restore_value: no
|
||||
initial_value: '4000' # 4 seconds in ms
|
||||
|
||||
|
||||
#############################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#############################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button: Light Switch 1 (Main)"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button: Light Switch 2 (Cabinet)"
|
||||
on_press:
|
||||
- switch.toggle: Relay_2
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO04
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button: Extract Fan"
|
||||
on_multi_click:
|
||||
# Single Click: one press (short press/release)
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
if (id(Relay_3).state) {
|
||||
ESP_LOGD("button3", "Single click: Relay_3 is on, turning it off.");
|
||||
id(Relay_3).turn_off();
|
||||
} else {
|
||||
ESP_LOGD("button3", "Single click: Relay_3 is off, turning it on for %d ms.", id(single_click_delay));
|
||||
id(Relay_3).turn_on();
|
||||
delay(id(single_click_delay));
|
||||
id(Relay_3).turn_off();
|
||||
}
|
||||
# Double Click: two quick press/release cycles
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD("button3", "Double click detected: turning Relay_3 on for %d ms.", id(double_click_delay));
|
||||
id(Relay_3).turn_on();
|
||||
delay(id(double_click_delay));
|
||||
id(Relay_3).turn_off();
|
||||
# Triple Click: three quick press/release cycles
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD("button3", "Triple click detected: turning Relay_3 on for %d ms.", id(triple_click_delay));
|
||||
id(Relay_3).turn_on();
|
||||
delay(id(triple_click_delay));
|
||||
id(Relay_3).turn_off();
|
||||
# Hold: button held for at least 4 seconds
|
||||
- timing:
|
||||
- ON for at least 4s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD("button3", "Hold detected (threshold %d ms): turning Relay_3 on indefinitely.", id(hold_threshold_val));
|
||||
id(Relay_3).turn_on();
|
||||
|
||||
|
||||
#############################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
#############################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay: Main Light"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
- platform: gpio
|
||||
name: "Relay: Cabinet Light"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
- platform: gpio
|
||||
name: "Relay: Extract Fan"
|
||||
pin: GPIO14
|
||||
id: Relay_3
|
||||
|
||||
|
||||
@@ -136,6 +136,8 @@ mqtt:
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
discovery: false # enable entity discovery (true is default)
|
||||
#discover_ip: True # enable device discovery (true is default)
|
||||
|
||||
|
||||
#############################################
|
||||
|
||||
@@ -151,8 +151,8 @@ mqtt:
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
discovery: True # enable entity discovery (true is default)
|
||||
discover_ip: True # enable device discovery (true is default)
|
||||
discovery: False # enable entity discovery (true is default)
|
||||
#discover_ip: True # enable device discovery (true is default)
|
||||
|
||||
#############################################
|
||||
# i2c bus
|
||||
|
||||
@@ -143,6 +143,7 @@ mqtt:
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
discovery: False # enable entity discovery (true is default, we don't want two HA Instances)
|
||||
|
||||
# Availability Topic
|
||||
birth_message:
|
||||
|
||||
639
esphome/esp-masterbathtowelrail copy.yaml.old
Normal file
639
esphome/esp-masterbathtowelrail copy.yaml.old
Normal file
@@ -0,0 +1,639 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# MASTER BATHROOM HEATED TOWEL RAIL
|
||||
# Controlled by a Sonoff Basic
|
||||
#
|
||||
# V1.1 2025-04-12 Fixes to timers and offline modes
|
||||
# V1.0 2025-02-14 Initial Version
|
||||
#
|
||||
# INSTRUCTIONS
|
||||
# - It allows a heated towel rail device to work in a standalone operation
|
||||
# - On startup, it will turn on for (startup_duration) hours then go into timer mode (this allows you to just turn it on to get some heat immediately)
|
||||
# - The timer has a morning and evening time (but no weekday/weekend setting)
|
||||
# - Default values are 5am-7am and 9pm-Midnight (as this suits our use case)
|
||||
# - It uses SNTP for time setting (but obviously only if wifi & networking are working)
|
||||
# - It will default to an internal timer if no wifi. To reset internal timer, reboot the device at 12pm (noon)
|
||||
# - If on a network and there is a MQTT server, you can set the 4 on/off times via MQTT (See below commands)
|
||||
# - You can set 4 modes ON/OFF/TIMER/STARTUP via MQTT. That way, you can set to STARTUP for a short boost
|
||||
# - Any new timer times set via MQTT will be remembered though a reboot
|
||||
# - On a reboot, the device will always turn on for the Startup Duration (STARTUP mode, default 2 hours)
|
||||
# - TIMER mode will always be switched on after startup mode is complete
|
||||
# - If you need it ON continuously with no MQTT, toggle power ON/OFF 4 times within 30 seconds (with ~2 secs in between to allow it to boot)
|
||||
#
|
||||
# MQTT Commands
|
||||
# Values will be set in place on the update_interval time, not immediately
|
||||
# Use 00:00 in 24hr format for time setting. Note there is no weekday/weekend setting
|
||||
# mqtt_timer_topic/morning-on/06:00 : Time towel rail will go on
|
||||
# mqtt_timer_topic/morning-off/08:00 : Time towel rail will go off
|
||||
# mqtt_timer_topic/evening-on/09:00 : Time towel rail will go on
|
||||
# mqtt_timer_topic/evening-off/00:00 : Time towel rail will go off
|
||||
# mqtt_timer_topic/operation/ON : Towel rail permanently on
|
||||
# mqtt_timer_topic/operation/OFF : Towel rail permanently off
|
||||
# mqtt_timer_topic/operation/TIMER : Towel rail will obey timer settings
|
||||
# mqtt_timer_topic/operation/STARTUP : Turn on for (startup_duration) hours then TIMER (also on startup)
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
|
||||
substitutions:
|
||||
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
|
||||
mqtt_timer_topic: "viewroad-commands/masterbath-towelrail" # Topics you will use to change stuff
|
||||
startup_duration: "10" # Minutes to stay ON in STARTUP mode before reverting to TIMER
|
||||
|
||||
devicename: "esp-masterbathtowelrail"
|
||||
friendly_name: "Master Bathroom Towelrail"
|
||||
description_comment: "Sonoff Basic controlling ON/OFF/Timer for the Heated Towel Rail in the Master Bathroom"
|
||||
|
||||
api_key: !secret esp-masterbathtowelrail_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-masterbathtowelrail_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-masterbathtowelrail_ip
|
||||
|
||||
update_interval: "300s" # Update time for for general sensors etc.
|
||||
|
||||
#############################################
|
||||
# SYSTEM SPECIFIC VARIABLE SUBSTITUTIONS
|
||||
#############################################
|
||||
|
||||
timezone: "Pacific/Auckland"
|
||||
sntp_update_interval: 6h # Set the duration between the sntp service polling
|
||||
# Network time servers https://www.ntppool.org/zone/@
|
||||
# Make sure you have some DNS, or use IP addresses only here.
|
||||
sntp_server_1: !secret ntp_server_1
|
||||
sntp_server_2: !secret ntp_server_2
|
||||
sntp_server_3: !secret ntp_server_3
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_api_key: ${api_key}
|
||||
local_ota_pass: ${ota_pass}
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} # Appears on the esphome page in HA
|
||||
on_boot:
|
||||
priority: 900 # High priority to run after globals are initialized
|
||||
then:
|
||||
- lambda: |-
|
||||
// 1) Figure out the current time in "seconds from midnight"
|
||||
// using SNTP if available, otherwise fallback_time * 60.
|
||||
bool have_sntp = id(sntp_time).now().is_valid();
|
||||
int current_time_s = 0;
|
||||
|
||||
if (have_sntp) {
|
||||
auto now = id(sntp_time).now();
|
||||
current_time_s = now.hour * 3600 + now.minute * 60 + now.second;
|
||||
} else {
|
||||
// fallback_time is in minutes; convert to seconds
|
||||
current_time_s = id(fallback_time) * 60;
|
||||
}
|
||||
|
||||
// 2) Compare with the last boot time
|
||||
int diff = current_time_s - id(last_boot_time_s);
|
||||
|
||||
// If within 30 seconds, increment boot_count; otherwise reset to 1
|
||||
if (diff >= 0 && diff <= 30) {
|
||||
id(boot_count)++;
|
||||
} else {
|
||||
id(boot_count) = 1;
|
||||
}
|
||||
|
||||
// Update stored last boot time
|
||||
id(last_boot_time_s) = current_time_s;
|
||||
|
||||
// 3) If we've booted 4+ times in 20s => force ON mode
|
||||
if (id(boot_count) >= 4) {
|
||||
id(operation_mode) = 1; // ON
|
||||
ESP_LOGI("power_cycle", "Detected 4 power cycles in 20s => Forcing ON mode");
|
||||
} else {
|
||||
// Otherwise do your normal startup logic:
|
||||
id(operation_mode) = 3; // on_boot -> sets operation_mode = 3 (STARTUP)
|
||||
id(startup_timer) = 0; // and reset startup_timer = 0 (for time sync if no sntp)
|
||||
ESP_LOGI("power_cycle", "Boot count=%d => STARTUP mode", id(boot_count));
|
||||
}
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp8266:
|
||||
board: esp01_1m # The original sonoff basic
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: DEBUG #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# Real time clock time source for ESPHome
|
||||
# If it's invalid, we fall back to an internal clock
|
||||
# https://esphome.io/components/time/index.html
|
||||
# https://esphome.io/components/time/sntp
|
||||
#############################################
|
||||
time:
|
||||
- platform: sntp
|
||||
id: sntp_time
|
||||
# Define the timezone of the device
|
||||
timezone: "${timezone}"
|
||||
# Change sync interval from default 5min to 6 hours (or as set in substitutions)
|
||||
update_interval: "${sntp_update_interval}"
|
||||
# Set specific sntp servers to use
|
||||
servers:
|
||||
- "${sntp_server_1}"
|
||||
- "${sntp_server_2}"
|
||||
- "${sntp_server_3}"
|
||||
# Publish the time the device was last restarted
|
||||
on_time_sync:
|
||||
then:
|
||||
- logger.log: "Synchronised sntp clock"
|
||||
- text_sensor.template.publish:
|
||||
id: time_sync
|
||||
state: "SNTP clock Syncd"
|
||||
# Update last restart time, but only once.
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(device_last_restart).state == "";'
|
||||
then:
|
||||
- text_sensor.template.publish:
|
||||
id: device_last_restart
|
||||
state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
|
||||
|
||||
#############################################
|
||||
# Global Variables for use in automations etc
|
||||
# https://esphome.io/guides/automations.html?highlight=globals#global-variables
|
||||
#############################################
|
||||
globals:
|
||||
|
||||
# Tracks the time (in seconds from midnight) at the previous boot
|
||||
- id: last_boot_time_s
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
|
||||
# Counts how many consecutive boots have occurred (within X seconds)
|
||||
- id: boot_count
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
|
||||
# Morning On time (minutes from midnight),
|
||||
# default 05:00 => 300
|
||||
- id: morning_on
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "300"
|
||||
|
||||
# Morning Off time (minutes from midnight),
|
||||
# default 07:00 => 420
|
||||
- id: morning_off
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "420"
|
||||
|
||||
# Evening On time (minutes from midnight),
|
||||
# default 21:00 => 1260
|
||||
- id: evening_on
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "1260"
|
||||
|
||||
# Evening Off time (minutes from midnight),
|
||||
# default 00:00 => 0 => treat as midnight
|
||||
- id: evening_off
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
|
||||
####################################################
|
||||
# operation_mode:
|
||||
# 0 = OFF
|
||||
# 1 = ON
|
||||
# 2 = TIMER
|
||||
# 3 = STARTUP
|
||||
####################################################
|
||||
- id: operation_mode
|
||||
type: int
|
||||
restore_value: false
|
||||
initial_value: "3"
|
||||
|
||||
####################################################
|
||||
# fallback_time is used if SNTP is invalid.
|
||||
# We assume user powers on the device at 12:00 noon
|
||||
# => 12 * 60 = 720 minutes from midnight.
|
||||
# Not restored, so it resets each boot.
|
||||
####################################################
|
||||
- id: fallback_time
|
||||
type: int
|
||||
restore_value: false
|
||||
initial_value: "720"
|
||||
|
||||
- id: current_mins
|
||||
type: int
|
||||
restore_value: false
|
||||
initial_value: '0'
|
||||
|
||||
####################################################
|
||||
# startup_timer: counts minutes in STARTUP mode
|
||||
# After 'startup_duration' minutes, revert to TIMER.
|
||||
# Not restored, so each boot starts fresh at 0.
|
||||
####################################################
|
||||
- id: startup_timer
|
||||
type: int
|
||||
restore_value: false
|
||||
initial_value: "0"
|
||||
|
||||
|
||||
# Time period string for converting to seconds
|
||||
#- id: update_interval_string
|
||||
# type: std::string
|
||||
# restore_value: false
|
||||
# max_restore_data_length: 12
|
||||
# initial_value: ${update_interval}
|
||||
|
||||
#############################################
|
||||
# Text Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
#############################################
|
||||
text_sensor:
|
||||
|
||||
############################
|
||||
# MQTT Subscriptions
|
||||
############################
|
||||
####################################################
|
||||
# Subscribe to the Morning On time, format "HH:MM"
|
||||
# We check x.size() == 5 and x[2] == ':',
|
||||
# then parse x.substr(0,2) and x.substr(3,2)
|
||||
# std::string uses 'substr', not 'substring'.
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Morning On Time Setting"
|
||||
id: morning_on_topic
|
||||
topic: "${mqtt_timer_topic}/morning-on" # Stored in the format HH:MM
|
||||
internal: True
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
// Expect "HH:MM" => total length = 5, with ':'
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str()); // "HH"
|
||||
int minute = atoi(x.substr(3, 2).c_str()); // "MM"
|
||||
id(morning_on) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Morning On: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Morning On format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Morning Off time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Morning Off Time Setting"
|
||||
id: morning_off_topic
|
||||
topic: "${mqtt_timer_topic}/morning-off" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str());
|
||||
int minute = atoi(x.substr(3, 2).c_str());
|
||||
id(morning_off) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Morning Off: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Morning Off format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Evening On time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Evening On Time Setting"
|
||||
id: evening_on_topic
|
||||
topic: "${mqtt_timer_topic}/evening-on" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str());
|
||||
int minute = atoi(x.substr(3, 2).c_str());
|
||||
id(evening_on) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Evening On: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Evening On format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Evening Off time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Evening Off Time Setting"
|
||||
id: evening_off_topic
|
||||
topic: "${mqtt_timer_topic}/evening-off" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str());
|
||||
int minute = atoi(x.substr(3, 2).c_str());
|
||||
id(evening_off) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Evening Off: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Evening Off format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Subscribe to operation mode:
|
||||
# OFF, ON, TIMER, STARTUP
|
||||
# We do case-insensitive compare using strcasecmp
|
||||
# (Requires <strings.h> typically included in ESPHome)
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Operation Mode Setting"
|
||||
id: timer_operation_mode_topic
|
||||
topic: "${mqtt_timer_topic}/operation" # STARTUP,ON,OFF,TIMER
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
/*
|
||||
* In standard C++ (ESPHome), no 'equalsIgnoreCase()'.
|
||||
* We use 'strcasecmp' for case-insensitive compare.
|
||||
* Returns 0 if they match ignoring case.
|
||||
*/
|
||||
if (strcasecmp(x.c_str(), "TIMER") == 0) {
|
||||
id(operation_mode) = 2;
|
||||
ESP_LOGI("timer","Operation mode set to TIMER");
|
||||
} else if (strcasecmp(x.c_str(), "ON") == 0) {
|
||||
id(operation_mode) = 1;
|
||||
ESP_LOGI("timer","Operation mode set to ON");
|
||||
} else if (strcasecmp(x.c_str(), "OFF") == 0) {
|
||||
id(operation_mode) = 0;
|
||||
ESP_LOGI("timer","Operation mode set to OFF");
|
||||
} else if (strcasecmp(x.c_str(), "STARTUP") == 0) {
|
||||
id(operation_mode) = 3;
|
||||
id(startup_timer) = 0; // Reset the startup timer to zero
|
||||
ESP_LOGI("timer","Operation mode set to STARTUP");
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid operation mode: %s", x.c_str());
|
||||
}
|
||||
|
||||
|
||||
######################################################
|
||||
# Expose the current operation mode (OFF, ON, TIMER, STARTUP)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Operation Mode State"
|
||||
lambda: |-
|
||||
// 0=OFF, 1=ON, 2=TIMER, 3=STARTUP
|
||||
switch (id(operation_mode)) {
|
||||
case 0: return {"OFF"};
|
||||
case 1: return {"ON"};
|
||||
case 2: return {"TIMER"};
|
||||
case 3: return {"STARTUP"};
|
||||
default: return {"UNKNOWN"};
|
||||
}
|
||||
update_interval: ${update_interval}
|
||||
|
||||
|
||||
|
||||
######################################################
|
||||
# Expose the "Morning On" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Morning On Time"
|
||||
lambda: |-
|
||||
int hour = id(morning_on) / 60;
|
||||
int minute = id(morning_on) % 60;
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: ${update_interval}
|
||||
|
||||
######################################################
|
||||
# Expose the "Morning Off" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Morning Off Time"
|
||||
lambda: |-
|
||||
int hour = id(morning_off) / 60;
|
||||
int minute = id(morning_off) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: ${update_interval}
|
||||
|
||||
######################################################
|
||||
# Expose the "Evening On" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Evening On Time"
|
||||
lambda: |-
|
||||
int hour = id(evening_on) / 60;
|
||||
int minute = id(evening_on) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: ${update_interval}
|
||||
|
||||
######################################################
|
||||
# Expose the "Evening Off" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Evening Off Time"
|
||||
lambda: |-
|
||||
int hour = id(evening_off) / 60;
|
||||
int minute = id(evening_off) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: ${update_interval}
|
||||
|
||||
######################################################
|
||||
# Creates a sensor showing when the device was last restarted
|
||||
# Uptime template sensor, and SNTP are needed
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Last Restart: ${friendly_name}"
|
||||
id: device_last_restart
|
||||
update_interval: ${update_interval}
|
||||
icon: mdi:clock
|
||||
entity_category: diagnostic
|
||||
#device_class: timestamp
|
||||
|
||||
- platform: template
|
||||
name: "Time Sync Status"
|
||||
id: time_sync
|
||||
update_interval: ${update_interval}
|
||||
entity_category: diagnostic
|
||||
|
||||
- platform: template
|
||||
name: "Internal Time"
|
||||
id: time_text
|
||||
update_interval: ${update_interval}
|
||||
entity_category: diagnostic
|
||||
lambda: |-
|
||||
auto time_text = id(sntp_time).now().strftime("%H:%M:%S - %d-%m-%Y");
|
||||
return { time_text };
|
||||
|
||||
sensor:
|
||||
- platform: template
|
||||
name: "Mins from Midnight"
|
||||
#unit_of_measurement: "s"
|
||||
#accuracy_decimals: 0
|
||||
update_interval: 1s
|
||||
lambda: |-
|
||||
return id(current_mins);
|
||||
|
||||
|
||||
####################################################
|
||||
# Relay Switch (Sonoff Basic Relay on GPIO12)
|
||||
####################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Towel Rail Power"
|
||||
pin: GPIO12
|
||||
id: relay
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
|
||||
####################################################
|
||||
# Check every minute to decide relay state
|
||||
####################################################
|
||||
interval:
|
||||
- interval: "1min"
|
||||
then:
|
||||
- lambda: |-
|
||||
// operation_mode:
|
||||
// 0 = OFF
|
||||
// 1 = ON
|
||||
// 2 = TIMER
|
||||
// 3 = STARTUP
|
||||
int mode = id(operation_mode);
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// STARTUP MODE: Relay ON for 'startup_duration'
|
||||
// minutes, then automatically revert to TIMER.
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 3) {
|
||||
id(startup_timer) = id(startup_timer) ++ ; // works as long as update_interval in seconds
|
||||
// Compare with the substitution startup_duration
|
||||
if (id(startup_timer) < (int) ${startup_duration}) {
|
||||
// Still within the STARTUP period => turn relay on
|
||||
id(relay).turn_on();
|
||||
} else {
|
||||
// After 'startup_duration' minutes => switch to TIMER
|
||||
id(operation_mode) = 2;
|
||||
id(mqtt_client).publish("${mqtt_timer_topic}/operation", "TIMER");
|
||||
}
|
||||
// Skip the rest of the logic
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// OFF MODE => always off
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 0) {
|
||||
id(relay).turn_off();
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// ON MODE => always on
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 1) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// TIMER MODE => follow morning/evening schedule
|
||||
// using SNTP if valid, else fallback_time
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 2) {
|
||||
//auto now = id(sntp_time).now();
|
||||
//bool have_sntp = now.is_valid();
|
||||
|
||||
//int current_mins;
|
||||
//if (!have_sntp) {
|
||||
//if (!id(time_sync).has_state()) {
|
||||
//if 1 == 1 {
|
||||
// SNTP not available => fallback clock
|
||||
current_mins = id(fallback_time);
|
||||
// increment the fallback clock by 1 minute
|
||||
id(fallback_time) += 1;
|
||||
// wrap around at 1440 => next day
|
||||
if (id(fallback_time) >= 1440) {
|
||||
id(fallback_time) = 0;
|
||||
//}
|
||||
//} else {
|
||||
// Use real time from SNTP
|
||||
// current_mins = now.hour * 60 + now.minute;
|
||||
}
|
||||
|
||||
bool should_on = false;
|
||||
|
||||
// If evening_off == 0 => treat as midnight => 1440
|
||||
int evening_off_local = id(evening_off);
|
||||
if (evening_off_local == 0) {
|
||||
evening_off_local = 1440;
|
||||
}
|
||||
|
||||
// Check morning window
|
||||
// Example: morning_on=360 => 06:00, morning_off=480 => 08:00
|
||||
// If current_mins in [360..480), should_on = true
|
||||
if (id(morning_on) < id(morning_off)) {
|
||||
if (current_mins >= id(morning_on) && current_mins < id(morning_off)) {
|
||||
should_on = true;
|
||||
}
|
||||
}
|
||||
|
||||
// Check evening window
|
||||
// Example: evening_on=540 => 09:00, evening_off=1440 => midnight
|
||||
if (id(evening_on) < evening_off_local) {
|
||||
if (current_mins >= id(evening_on) && current_mins < evening_off_local) {
|
||||
should_on = true;
|
||||
}
|
||||
}
|
||||
|
||||
// Final relay state based on schedule
|
||||
if (should_on) {
|
||||
id(relay).turn_on();
|
||||
} else {
|
||||
id(relay).turn_off();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@@ -3,21 +3,22 @@
|
||||
# MASTER BATHROOM HEATED TOWEL RAIL
|
||||
# Controlled by a Sonoff Basic
|
||||
#
|
||||
# V1.1 2025-04-12 Fixes to timers and offline modes
|
||||
# V1.0 2025-02-14 Initial Version
|
||||
#
|
||||
# INSTRUCTIONS
|
||||
# - It allows a heated towel rail device to work in a standalone operation
|
||||
# - On startup, it will turn on for 2 hours then go into timer mode (this allows you to just turn it on to get some heat immediately)
|
||||
# - On startup, it will turn on for (startup_duration) hours then go into timer mode (this allows you to just turn it on to get some heat immediately)
|
||||
# - The timer has a morning and evening time (but no weekday/weekend setting)
|
||||
# - Default values are 5am-7am and 9pm-Midnight (as this suits our use case)
|
||||
# - It uses SNTP for time setting (but obviously only if wifi & networking are working)
|
||||
# - It will default to an internal timer if no wifi. To reset internal timer, reboot the device at 12pm (noon)
|
||||
# - If on a network and there is a MQTT server, you can set the 4 on/off times via MQTT (See below commands)
|
||||
# - You can set 4 modes ON/OFF/TIMER/STARTUP via MQTT
|
||||
# - You can set 4 modes ON/OFF/TIMER/STARTUP via MQTT. That way, you can set to STARTUP for a short boost
|
||||
# - Any new timer times set via MQTT will be remembered though a reboot
|
||||
# - On a reboot, the device will always turn on for the Startup Duration (STARTUP mode, default 2 hours)
|
||||
# - TIMER mode will always be switched on after startup mode is complete
|
||||
# - If you need it ON continuously with no MQTT, toggle power ON/OFF 4 times within 20 seconds (with ~2 secs in between to allow it to boot)
|
||||
# - If you need it ON continuously with no MQTT, toggle power ON/OFF 4 times within 30 seconds (with ~2 secs in between to allow it to boot)
|
||||
#
|
||||
# MQTT Commands
|
||||
# Values will be set in place on the update_interval time, not immediately
|
||||
@@ -29,49 +30,61 @@
|
||||
# mqtt_timer_topic/operation/ON : Towel rail permanently on
|
||||
# mqtt_timer_topic/operation/OFF : Towel rail permanently off
|
||||
# mqtt_timer_topic/operation/TIMER : Towel rail will obey timer settings
|
||||
# mqtt_timer_topic/operation/STARTUP : Turn on for 2 hours then TIMER (also on startup)
|
||||
# mqtt_timer_topic/operation/STARTUP : Turn on for (startup_duration) hours then TIMER (also on startup)
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
#############################################
|
||||
# VARIABLE SUBSTITUTIONS
|
||||
# Give the device a useful name & description here
|
||||
# and change values accordingly.
|
||||
#############################################
|
||||
substitutions:
|
||||
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
|
||||
mqtt_timer_topic: "viewroad-commands/masterbath-towelrail" # Topics you will use to change stuff
|
||||
startup_duration: "120" # Minutes to stay ON in STARTUP mode before reverting to TIMER
|
||||
timezone: "Pacific/Auckland" # For setting clock with snmp
|
||||
|
||||
devicename: "esp-masterbathtowelrail"
|
||||
friendly_name: "Master Bathroom Towelrail"
|
||||
description_comment: "Sonoff Basic controlling ON/OFF/Timer for the Heated Towel Rail in the Master Bathroom"
|
||||
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
|
||||
api_key: !secret esp-masterbathtowelrail_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-masterbathtowelrail_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
wifi_ssid: !secret wifi_ssid
|
||||
wifi_password: !secret wifi_password
|
||||
fallback_ap_password: !secret fallback_ap_password
|
||||
|
||||
# Add these if we are giving it a static ip, or remove them in the Wifi section
|
||||
#static_ip_address: !secret esp-occupancyoffice_static_ip
|
||||
#static_ip_gateway: !secret esp-occupancyoffice_gateway
|
||||
#static_ip_subnet: !secret esp-occupancyoffice_subnet
|
||||
static_ip_address: !secret esp-masterbathtowelrail_ip
|
||||
|
||||
mqtt_server: !secret mqtt_server
|
||||
mqtt_username: !secret mqtt_username
|
||||
mqtt_password: !secret mqtt_password
|
||||
mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
|
||||
update_interval: "60s" # Update time for for general sensors etc.
|
||||
|
||||
# Add these if we are using the internal web server (this is pretty processor intensive)
|
||||
#web_server_username: !secret web_server_username
|
||||
#web_server_password: !secret web_server_password
|
||||
#############################################
|
||||
# SYSTEM SPECIFIC VARIABLE SUBSTITUTIONS
|
||||
#############################################
|
||||
|
||||
update_interval: 60s # update time for for general sensors etc
|
||||
timezone: "Pacific/Auckland"
|
||||
sntp_update_interval: 6h # Set the duration between the sntp service polling
|
||||
# Network time servers https://www.ntppool.org/zone/@
|
||||
# Make sure you have some DNS, or use IP addresses only here.
|
||||
sntp_server_1: !secret ntp_server_1
|
||||
sntp_server_2: !secret ntp_server_2
|
||||
sntp_server_3: !secret ntp_server_3
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_api_key: ${api_key}
|
||||
local_ota_pass: ${ota_pass}
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
@@ -80,13 +93,13 @@ substitutions:
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #a ppears on the esphome page in HA
|
||||
comment: ${description_comment} # Appears on the esphome page in HA
|
||||
on_boot:
|
||||
priority: 900 # high priority to run after globals are initialized
|
||||
priority: 900 # High priority to run after globals are initialized
|
||||
then:
|
||||
- lambda: |-
|
||||
// 1) Figure out the current time in "seconds from midnight"
|
||||
// using SNTP if available, otherwise fallback_time * 60.
|
||||
// using SNTP if available, otherwise current_mins * 60.
|
||||
bool have_sntp = id(sntp_time).now().is_valid();
|
||||
int current_time_s = 0;
|
||||
|
||||
@@ -94,15 +107,15 @@ esphome:
|
||||
auto now = id(sntp_time).now();
|
||||
current_time_s = now.hour * 3600 + now.minute * 60 + now.second;
|
||||
} else {
|
||||
// fallback_time is in minutes; convert to seconds
|
||||
current_time_s = id(fallback_time) * 60;
|
||||
// current_mins is in minutes; convert to seconds
|
||||
current_time_s = id(current_mins) * 60;
|
||||
}
|
||||
|
||||
// 2) Compare with the last boot time
|
||||
int diff = current_time_s - id(last_boot_time_s);
|
||||
|
||||
// If within 20 seconds, increment boot_count; otherwise reset to 1
|
||||
if (diff >= 0 && diff <= 20) {
|
||||
// If within 30 seconds, increment boot_count; otherwise reset to 1
|
||||
if (diff >= 0 && diff <= 30) {
|
||||
id(boot_count)++;
|
||||
} else {
|
||||
id(boot_count) = 1;
|
||||
@@ -134,58 +147,11 @@ esp8266:
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: INFO #INFO Level suggested, or DEBUG for testing
|
||||
level: DEBUG #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# Enable the Home Assistant API
|
||||
# https://esphome.io/components/api.html
|
||||
#############################################
|
||||
api:
|
||||
encryption:
|
||||
key: ${api_key}
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
#############################################
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: ${ota_pass}
|
||||
|
||||
#############################################
|
||||
# Safe Mode
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
#############################################
|
||||
safe_mode:
|
||||
|
||||
#############################################
|
||||
# Wifi Settings
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
# NONE (least power saving, Default for ESP8266)
|
||||
# LIGHT (Default for ESP32)
|
||||
# HIGH (most power saving)
|
||||
#############################################
|
||||
wifi:
|
||||
ssid: ${wifi_ssid}
|
||||
password: ${wifi_password}
|
||||
#power_save_mode: LIGHT # https://esphome.io/components/wifi.html#wifi-power-save-mode
|
||||
#manual_ip: # optional static IP address
|
||||
#static_ip: ${static_ip_address}
|
||||
#gateway: ${static_ip_gateway}
|
||||
#subnet: ${static_ip_subnet}
|
||||
ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
ssid: ${devicename} AP
|
||||
password: ${fallback_ap_password}
|
||||
ap_timeout: 30min # Time until it brings up fallback AP. default is 1min
|
||||
|
||||
captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails
|
||||
|
||||
#############################################
|
||||
# Real time clock time source for ESPHome
|
||||
# If it's invalid, we fall back to an internal clock
|
||||
@@ -195,19 +161,30 @@ captive_portal: # extra fallback mechanism for when connecting if the configure
|
||||
time:
|
||||
- platform: sntp
|
||||
id: sntp_time
|
||||
|
||||
#############################################
|
||||
# MQTT Monitoring
|
||||
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
||||
# MUST also have api enabled if you enable MQTT
|
||||
#############################################
|
||||
mqtt:
|
||||
broker: ${mqtt_server}
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
#discovery: True # enable entity discovery (true is default)
|
||||
#discover_ip: True # enable device discovery (true is default)
|
||||
# Define the timezone of the device
|
||||
timezone: "${timezone}"
|
||||
# Change sync interval from default 5min to 6 hours (or as set in substitutions)
|
||||
update_interval: "${sntp_update_interval}"
|
||||
# Set specific sntp servers to use
|
||||
servers:
|
||||
- "${sntp_server_1}"
|
||||
- "${sntp_server_2}"
|
||||
- "${sntp_server_3}"
|
||||
# Publish the time the device was last restarted
|
||||
on_time_sync:
|
||||
then:
|
||||
- logger.log: "Synchronised sntp clock"
|
||||
- text_sensor.template.publish:
|
||||
id: time_sync
|
||||
state: "SNTP clock Syncd"
|
||||
# Update last restart time, but only once.
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(device_last_restart).state == "";'
|
||||
then:
|
||||
- text_sensor.template.publish:
|
||||
id: device_last_restart
|
||||
state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
|
||||
|
||||
#############################################
|
||||
# Global Variables for use in automations etc
|
||||
@@ -221,7 +198,7 @@ globals:
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
|
||||
# Counts how many consecutive boots have occurred within 10 seconds
|
||||
# Counts how many consecutive boots have occurred (within X seconds)
|
||||
- id: boot_count
|
||||
type: int
|
||||
restore_value: true
|
||||
@@ -249,11 +226,11 @@ globals:
|
||||
initial_value: "1260"
|
||||
|
||||
# Evening Off time (minutes from midnight),
|
||||
# default 00:00 => 0 => treat as midnight
|
||||
# default 24:00 => 1440 => treat as midnight
|
||||
- id: evening_off
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
initial_value: "1440"
|
||||
|
||||
####################################################
|
||||
# operation_mode:
|
||||
@@ -268,15 +245,15 @@ globals:
|
||||
initial_value: "3"
|
||||
|
||||
####################################################
|
||||
# fallback_time is used if SNTP is invalid.
|
||||
# current_mins is set if SNTP is invalid.
|
||||
# We assume user powers on the device at 12:00 noon
|
||||
# => 12 * 60 = 720 minutes from midnight.
|
||||
# Not restored, so it resets each boot.
|
||||
####################################################
|
||||
- id: fallback_time
|
||||
- id: current_mins
|
||||
type: int
|
||||
restore_value: false
|
||||
initial_value: "720"
|
||||
initial_value: "720" # 720 is 12:00 Noon
|
||||
|
||||
####################################################
|
||||
# startup_timer: counts minutes in STARTUP mode
|
||||
@@ -288,6 +265,7 @@ globals:
|
||||
restore_value: false
|
||||
initial_value: "0"
|
||||
|
||||
|
||||
#############################################
|
||||
# Text Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
@@ -297,7 +275,6 @@ text_sensor:
|
||||
############################
|
||||
# MQTT Subscriptions
|
||||
############################
|
||||
|
||||
####################################################
|
||||
# Subscribe to the Morning On time, format "HH:MM"
|
||||
# We check x.size() == 5 and x[2] == ':',
|
||||
@@ -305,9 +282,9 @@ text_sensor:
|
||||
# std::string uses 'substr', not 'substring'.
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Morning On Time"
|
||||
name: "Morning On Time Setting"
|
||||
id: morning_on_topic
|
||||
topic: "${mqtt_timer_topic}/morning-on"
|
||||
topic: "${mqtt_timer_topic}/morning-on" # Stored in the format HH:MM
|
||||
internal: True
|
||||
on_value:
|
||||
then:
|
||||
@@ -321,14 +298,13 @@ text_sensor:
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Morning On format: %s", x.c_str());
|
||||
}
|
||||
|
||||
####################################################
|
||||
# Morning Off time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Morning Off Time"
|
||||
name: "Morning Off Time Setting"
|
||||
id: morning_off_topic
|
||||
topic: "${mqtt_timer_topic}/morning-off"
|
||||
topic: "${mqtt_timer_topic}/morning-off" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
@@ -341,14 +317,13 @@ text_sensor:
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Morning Off format: %s", x.c_str());
|
||||
}
|
||||
|
||||
####################################################
|
||||
# Evening On time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Evening On Time"
|
||||
name: "Evening On Time Setting"
|
||||
id: evening_on_topic
|
||||
topic: "${mqtt_timer_topic}/evening-on"
|
||||
topic: "${mqtt_timer_topic}/evening-on" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
@@ -361,14 +336,13 @@ text_sensor:
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Evening On format: %s", x.c_str());
|
||||
}
|
||||
|
||||
####################################################
|
||||
# Evening Off time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Evening Off Time"
|
||||
name: "Evening Off Time Setting"
|
||||
id: evening_off_topic
|
||||
topic: "${mqtt_timer_topic}/evening-off"
|
||||
topic: "${mqtt_timer_topic}/evening-off" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
@@ -381,7 +355,6 @@ text_sensor:
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Evening Off format: %s", x.c_str());
|
||||
}
|
||||
|
||||
####################################################
|
||||
# Subscribe to operation mode:
|
||||
# OFF, ON, TIMER, STARTUP
|
||||
@@ -389,9 +362,9 @@ text_sensor:
|
||||
# (Requires <strings.h> typically included in ESPHome)
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Timer Operation Mode"
|
||||
name: "Operation Mode Setting"
|
||||
id: timer_operation_mode_topic
|
||||
topic: "${mqtt_timer_topic}/operation"
|
||||
topic: "${mqtt_timer_topic}/operation" # STARTUP,ON,OFF,TIMER
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
@@ -412,7 +385,7 @@ text_sensor:
|
||||
ESP_LOGI("timer","Operation mode set to OFF");
|
||||
} else if (strcasecmp(x.c_str(), "STARTUP") == 0) {
|
||||
id(operation_mode) = 3;
|
||||
id(startup_timer) = 0;
|
||||
id(startup_timer) = 0; // Reset the startup timer to zero
|
||||
ESP_LOGI("timer","Operation mode set to STARTUP");
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid operation mode: %s", x.c_str());
|
||||
@@ -438,7 +411,7 @@ text_sensor:
|
||||
# Expose the "Morning On" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Morning On Time State"
|
||||
name: "Timeclock: Morning On Time"
|
||||
lambda: |-
|
||||
int hour = id(morning_on) / 60;
|
||||
int minute = id(morning_on) % 60;
|
||||
@@ -452,7 +425,7 @@ text_sensor:
|
||||
# Expose the "Morning Off" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Morning Off Time State"
|
||||
name: "Timeclock: Morning Off Time"
|
||||
lambda: |-
|
||||
int hour = id(morning_off) / 60;
|
||||
int minute = id(morning_off) % 60;
|
||||
@@ -467,7 +440,7 @@ text_sensor:
|
||||
# Expose the "Evening On" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Evening On Time State"
|
||||
name: "Timeclock: Evening On Time"
|
||||
lambda: |-
|
||||
int hour = id(evening_on) / 60;
|
||||
int minute = id(evening_on) % 60;
|
||||
@@ -482,7 +455,7 @@ text_sensor:
|
||||
# Expose the "Evening Off" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Evening Off Time State"
|
||||
name: "Timeclock: Evening Off Time"
|
||||
lambda: |-
|
||||
int hour = id(evening_off) / 60;
|
||||
int minute = id(evening_off) % 60;
|
||||
@@ -494,25 +467,45 @@ text_sensor:
|
||||
update_interval: ${update_interval}
|
||||
|
||||
######################################################
|
||||
# ESPHome Info
|
||||
# Creates a sensor showing when the device was last restarted
|
||||
# Uptime template sensor, and SNTP are needed
|
||||
######################################################
|
||||
- platform: version
|
||||
name: ${friendly_name} Version
|
||||
- platform: wifi_info
|
||||
ip_address:
|
||||
name: ${friendly_name} IP Address
|
||||
- platform: template
|
||||
name: "Last Restart: ${friendly_name}"
|
||||
id: device_last_restart
|
||||
update_interval: ${update_interval}
|
||||
icon: mdi:clock
|
||||
entity_category: diagnostic
|
||||
|
||||
- platform: template
|
||||
name: "Time Sync Status"
|
||||
id: time_sync
|
||||
update_interval: ${update_interval}
|
||||
entity_category: diagnostic
|
||||
|
||||
- platform: template
|
||||
name: "Internal Time"
|
||||
id: time_text
|
||||
update_interval: ${update_interval}
|
||||
entity_category: diagnostic
|
||||
lambda: |-
|
||||
auto time_text = id(sntp_time).now().strftime("%H:%M:%S - %d-%m-%Y");
|
||||
return { time_text };
|
||||
|
||||
#############################################
|
||||
# General Sensors
|
||||
# https://esphome.io/components/sensor/index.html
|
||||
# Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
#############################################
|
||||
sensor:
|
||||
- platform: uptime # Uptime for this device
|
||||
name: ${friendly_name} Uptime
|
||||
update_interval: ${update_interval}
|
||||
- platform: wifi_signal # Wifi Strength
|
||||
name: ${friendly_name} Wifi Signal
|
||||
update_interval: ${update_interval}
|
||||
- platform: template
|
||||
name: "Mins from Midnight"
|
||||
unit_of_measurement: "mins"
|
||||
accuracy_decimals: 0
|
||||
update_interval: ${update_interval}
|
||||
internal: True
|
||||
lambda: |-
|
||||
return id(current_mins);
|
||||
|
||||
|
||||
####################################################
|
||||
# Relay Switch (Sonoff Basic Relay on GPIO12)
|
||||
@@ -528,9 +521,27 @@ switch:
|
||||
# Check every minute to decide relay state
|
||||
####################################################
|
||||
interval:
|
||||
- interval: ${update_interval}
|
||||
- interval: "1min" # Must be 1min as this is used to calculate times
|
||||
then:
|
||||
- lambda: |-
|
||||
|
||||
// Do we have correct time from SNTP? If not...
|
||||
if (!id(time_sync).has_state()) {
|
||||
// Set minutes since midnight
|
||||
id(current_mins) = id(current_mins) +1 ;
|
||||
|
||||
// wrap around at 1440 => next day
|
||||
if (id(current_mins) >= 1440) {
|
||||
id(current_mins) = 0;
|
||||
}
|
||||
|
||||
// If we do have proper SNMP time...
|
||||
} else {
|
||||
// Use real time from SNTP
|
||||
auto now = id(sntp_time).now();
|
||||
id(current_mins) = now.hour * 60 + now.minute;
|
||||
}
|
||||
|
||||
// operation_mode:
|
||||
// 0 = OFF
|
||||
// 1 = ON
|
||||
@@ -543,7 +554,7 @@ interval:
|
||||
// minutes, then automatically revert to TIMER.
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 3) {
|
||||
id(startup_timer)++;
|
||||
id(startup_timer) = id(startup_timer) + 1 ; // works as long as update_interval in seconds
|
||||
// Compare with the substitution startup_duration
|
||||
if (id(startup_timer) < (int) ${startup_duration}) {
|
||||
// Still within the STARTUP period => turn relay on
|
||||
@@ -551,8 +562,10 @@ interval:
|
||||
} else {
|
||||
// After 'startup_duration' minutes => switch to TIMER
|
||||
id(operation_mode) = 2;
|
||||
id(mqtt_client).publish("${mqtt_timer_topic}/operation", "TIMER");
|
||||
}
|
||||
// Skip the rest of the logic
|
||||
ESP_LOGI("startup_timer", "startup_timer=%d", id(startup_timer));
|
||||
return;
|
||||
}
|
||||
|
||||
@@ -574,50 +587,26 @@ interval:
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// TIMER MODE => follow morning/evening schedule
|
||||
// using SNTP if valid, else fallback_time
|
||||
// using SNTP if valid, else current_mins
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 2) {
|
||||
auto now = id(sntp_time).now();
|
||||
bool have_sntp = now.is_valid();
|
||||
|
||||
int current_mins;
|
||||
if (!have_sntp) {
|
||||
// SNTP not available => fallback clock
|
||||
current_mins = id(fallback_time);
|
||||
// increment the fallback clock by 1 minute
|
||||
id(fallback_time) += 1;
|
||||
// wrap around at 1440 => next day
|
||||
if (id(fallback_time) >= 1440) {
|
||||
id(fallback_time) = 0;
|
||||
}
|
||||
} else {
|
||||
// Use real time from SNTP
|
||||
current_mins = now.hour * 60 + now.minute;
|
||||
}
|
||||
if (mode == 2)
|
||||
{
|
||||
|
||||
bool should_on = false;
|
||||
|
||||
// If evening_off == 0 => treat as midnight => 1440
|
||||
int evening_off_local = id(evening_off);
|
||||
if (evening_off_local == 0) {
|
||||
evening_off_local = 1440;
|
||||
}
|
||||
|
||||
// Check morning window
|
||||
// Example: morning_on=360 => 06:00, morning_off=480 => 08:00
|
||||
// If current_mins in [360..480), should_on = true
|
||||
if (id(morning_on) < id(morning_off)) {
|
||||
if (current_mins >= id(morning_on) && current_mins < id(morning_off)) {
|
||||
should_on = true;
|
||||
}
|
||||
if (id(current_mins) >= id(morning_on) && id(current_mins) < id(morning_off) )
|
||||
{
|
||||
should_on = true;
|
||||
}
|
||||
|
||||
// Check evening window
|
||||
// Example: evening_on=540 => 09:00, evening_off=1440 => midnight
|
||||
if (id(evening_on) < evening_off_local) {
|
||||
if (current_mins >= id(evening_on) && current_mins < evening_off_local) {
|
||||
should_on = true;
|
||||
}
|
||||
// Example: evening_on=1260 => 21:00, evening_off=1440 => midnight
|
||||
if (id(current_mins) >= id(evening_on) && id(current_mins) < id(evening_off) )
|
||||
{
|
||||
should_on = true;
|
||||
}
|
||||
|
||||
// Final relay state based on schedule
|
||||
@@ -626,4 +615,8 @@ interval:
|
||||
} else {
|
||||
id(relay).turn_off();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -165,8 +165,8 @@ mqtt:
|
||||
topic_prefix: ${mqtt_topic}/${device_name}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
discovery: True # enable entity discovery (true is default)
|
||||
discover_ip: True # enable device discovery (true is default)
|
||||
discovery: False # enable entity discovery (true is default)
|
||||
#discover_ip: True # enable device discovery (true is default)
|
||||
|
||||
|
||||
#############################################
|
||||
@@ -291,5 +291,72 @@ light:
|
||||
warm_white: output_ww
|
||||
cold_white_color_temperature: 4800 K
|
||||
warm_white_color_temperature: 2500 K # 2500k is the original value of the lamp. To correct binning for 2700k to look more like 2700k use 2650k instead
|
||||
restore_mode: ALWAYS_ON
|
||||
gamma_correct: 0
|
||||
restore_mode: ALWAYS_OFF
|
||||
gamma_correct: 0
|
||||
|
||||
|
||||
|
||||
|
||||
#globals:
|
||||
# - id: fade_brightness
|
||||
# type: float
|
||||
# initial_value: '0.0'
|
||||
# - id: fade_step
|
||||
# type: float
|
||||
# initial_value: '0.0'
|
||||
|
||||
|
||||
# This script fades the light ON to full brightness over 20 seconds.
|
||||
#script:
|
||||
# - id: fade_on
|
||||
# then:
|
||||
# # First, capture the current brightness.
|
||||
# - lambda: |-
|
||||
# // If the light is off, current brightness will be 0.0.
|
||||
# float current = id(light1).current_values.get_brightness();
|
||||
# id(fade_brightness) = current;
|
||||
# // Compute the step size so that after 100 steps (200ms each) we reach full brightness.
|
||||
# id(fade_step) = (1.0 - current) / 100.0;
|
||||
# - repeat:
|
||||
# count: 100
|
||||
# then:
|
||||
# - lambda: |-
|
||||
# id(fade_brightness) += id(fade_step);
|
||||
# if (id(fade_brightness) > 1.0) {
|
||||
# id(fade_brightness) = 1.0;
|
||||
# }
|
||||
# // Update the light’s brightness.
|
||||
# id(light1).turn_on({ brightness: id(fade_brightness) });
|
||||
# - delay: 200ms
|
||||
|
||||
# This script fades the light OFF over 20 seconds.
|
||||
# - id: fade_off
|
||||
# then:
|
||||
# - lambda: |-
|
||||
# // Capture current brightness (if the light is on).
|
||||
# float current = id(light1).current_values.get_brightness();
|
||||
# id(fade_brightness) = current;
|
||||
# // Compute step size so that after 100 steps we reach 0.
|
||||
# id(fade_step) = current / 100.0;
|
||||
# - repeat:
|
||||
# count: 100
|
||||
# then:
|
||||
# - lambda: |-
|
||||
# id(fade_brightness) -= id(fade_step);
|
||||
# if (id(fade_brightness) < 0.0) {
|
||||
# id(fade_brightness) = 0.0;
|
||||
# }
|
||||
# id(light1).turn_on({ brightness: id(fade_brightness) });
|
||||
# - delay: 200ms
|
||||
# # Finally, ensure the light is turned off.
|
||||
# - lambda: |-
|
||||
# id(light1).turn_off();
|
||||
|
||||
#switch:
|
||||
# - platform: template
|
||||
# name: "Fade on and off"
|
||||
# id: virtual_switch
|
||||
# turn_on_action:
|
||||
# - script.execute: fade_on
|
||||
# turn_off_action:
|
||||
# - script.execute: fade_off
|
||||
86
esphome/esp-nexmulti1.yaml
Normal file
86
esphome/esp-nexmulti1.yaml
Normal file
@@ -0,0 +1,86 @@
|
||||
#############################################
|
||||
#############################################
|
||||
#
|
||||
#
|
||||
#
|
||||
# V1.0 2025-02-14 Initial Version
|
||||
#
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# INSTRUCTIONS
|
||||
# -
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
substitutions:
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
devicename: "esp-nexmulti1"
|
||||
friendly_name: "esp-nexmulti1"
|
||||
description_comment: "Multisensor 1 test"
|
||||
|
||||
api_key: !secret esp-nexmulti1_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-nexmulti1_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-nexmulti1_ip
|
||||
|
||||
update_interval: 60s # update time for for general sensors etc
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_api_key: ${api_key}
|
||||
local_ota_pass: ${ota_pass}
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #Appears on the esphome page in HA
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: INFO #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
|
||||
#############################################
|
||||
# Real time clock time source for ESPHome
|
||||
# If it's invalid, we fall back to an internal clock
|
||||
# https://esphome.io/components/time/
|
||||
# https://esphome.io/components/time/sntp
|
||||
#############################################
|
||||
#time:
|
||||
# - platform: sntp
|
||||
# id: sntp_time
|
||||
|
||||
@@ -183,8 +183,8 @@ mqtt:
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
discovery: True # enable entity discovery (true is default)
|
||||
discover_ip: True # enable device discovery (true is default)
|
||||
discovery: False # enable entity discovery (true is default)
|
||||
#discover_ip: True # enable device discovery (true is default)
|
||||
|
||||
|
||||
#############################################
|
||||
|
||||
@@ -150,8 +150,8 @@ mqtt:
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
discovery: True # enable entity discovery (true is default)
|
||||
discover_ip: True # enable device discovery (true is default)
|
||||
discovery: false # enable entity discovery (true is default)
|
||||
#discover_ip: True # enable device discovery (true is default)
|
||||
|
||||
#############################################
|
||||
# Bluetooth
|
||||
|
||||
Reference in New Issue
Block a user