finally got sonoff dual r1 code esphome working as I need
This commit is contained in:
root
298
esphome/esp-officeduallights.yaml
Normal file
298
esphome/esp-officeduallights.yaml
Normal file
@@ -0,0 +1,298 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# OFFICE DUAL LIGHT CONTROL
|
||||
# - Overhead cool white lights
|
||||
# - Right hand warm bunker light
|
||||
#
|
||||
# Controlled by a Sonoff Dual R1
|
||||
# A sonoff dual uses serial data to turn the relays on/off
|
||||
#
|
||||
# V2.3 - 2025-06-18 Added MQTT direct relay control
|
||||
#
|
||||
# NOTES:
|
||||
# Command the lights on with MQTT
|
||||
# ${mqtt_command_topic}/relay2/set ON or OFF
|
||||
# ${mqtt_command_topic}/relay2/set ON or OFF
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-officeduallights"
|
||||
friendly_name: "Office Dual Lights"
|
||||
description_comment: "Dual Office Lights (Overhead and right hand Bunker) :: Sonoff Dual R1"
|
||||
device_area: "Office" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
mqtt_device_name: "office-dual-lights"
|
||||
|
||||
# Project Naming
|
||||
project_name: "Sonoff Technologies.Sonoff Dual R1" # Project Details
|
||||
project_version: "v2.3" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-officeduallights_ip
|
||||
mqtt_main_command_topic: !secret mqtt_main_command_topic
|
||||
|
||||
# Device Settings
|
||||
relay_icon: "mdi:lightbulb-group"
|
||||
log_level: "NONE" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
# MQTT Controls
|
||||
mqtt_topic: "${mqtt_main_command_topic}/${mqtt_device_name}" # Topic we will use to command stuff from external withougt HA
|
||||
#mqtt_status_topic: "${mqtt_main_status_topic}/esphome/${device_name}" # Topic we will use to read stuff from external withougt HA
|
||||
#mqtt_main_status_topic: !secret mqtt_main_status_topic
|
||||
#mqtt_remote_device1_command_topic: "${mqtt_main_command_topic}/masterbath-towelrail/operation"
|
||||
#mqtt_remote_device1_command1: "BOOST"
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" # Appears on the esphome page in HA
|
||||
area: "${device_area}"
|
||||
platformio_options:
|
||||
build_flags:
|
||||
- "-Os" # optimize for size
|
||||
- "-Wl,--gc-sections" # drop unused code/data
|
||||
- "-fno-exceptions" # strip C++ exceptaions
|
||||
- "-fno-rtti" # strip C++ RTTI
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp01_1m # The original sonoff basic
|
||||
restore_from_flash: False # restore some values on reboot
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
|
||||
mdns:
|
||||
disabled: True
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
# NOTE: Sonoff Dual CANNOT send serial data to log
|
||||
###############################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM, Serial control)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
##########################################################################################
|
||||
# UART Bus
|
||||
# https://esphome.io/components/uart.html
|
||||
##########################################################################################
|
||||
uart:
|
||||
tx_pin: GPIO01
|
||||
rx_pin: GPIO03
|
||||
baud_rate: 19200
|
||||
#data_bits: 8
|
||||
#stop_bits: 1
|
||||
#parity: EVEN
|
||||
|
||||
##########################################################################################
|
||||
# MQTT COMMANDS
|
||||
# This adds device-specific MQTT command triggers to the common MQTT configuration.
|
||||
##########################################################################################
|
||||
mqtt:
|
||||
# Direct MQTT control for relays via serial commands
|
||||
on_message:
|
||||
# Relay 1 control
|
||||
- topic: "${mqtt_topic}/relay1/set"
|
||||
payload: "ON"
|
||||
then:
|
||||
- switch.turn_on: relay_1
|
||||
- light.turn_on: light_1
|
||||
- topic: "${mqtt_topic}/relay1/set"
|
||||
payload: "OFF"
|
||||
then:
|
||||
- switch.turn_off: relay_1
|
||||
- light.turn_off: light_1
|
||||
|
||||
# Relay 2 control
|
||||
- topic: "${mqtt_topic}/relay2/set"
|
||||
payload: "ON"
|
||||
then:
|
||||
- switch.turn_on: relay_2
|
||||
- light.turn_on: light_2
|
||||
- topic: "${mqtt_topic}/relay2/set"
|
||||
payload: "OFF"
|
||||
then:
|
||||
- switch.turn_off: relay_2
|
||||
- light.turn_off: light_2
|
||||
|
||||
##########################################################################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
##########################################################################################
|
||||
# Sonoff Dual LED is GPIO13
|
||||
#############################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO13
|
||||
inverted: yes
|
||||
|
||||
##########################################################################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
##########################################################################################
|
||||
# Sonoff Dual R1 buttons are GPIO04, GPIO14
|
||||
#############################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO4
|
||||
mode: INPUT_PULLUP
|
||||
inverted: true
|
||||
id: button_1
|
||||
on_press:
|
||||
- switch.toggle: relay_1
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO14
|
||||
mode: INPUT_PULLUP
|
||||
inverted: true
|
||||
id: button_2
|
||||
on_press:
|
||||
- switch.toggle: relay_2
|
||||
|
||||
##########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
##########################################################################################
|
||||
# Sonoff Dual R1 requires serial data to switch
|
||||
#############################################
|
||||
switch:
|
||||
- platform: template
|
||||
name: "Dual L1 Relay"
|
||||
id: relay_1
|
||||
optimistic: true
|
||||
icon: "${relay_icon}"
|
||||
internal: true
|
||||
turn_on_action:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_topic}/relay1/state"
|
||||
payload: "ON"
|
||||
- if:
|
||||
condition:
|
||||
switch.is_off: relay_2
|
||||
then:
|
||||
- uart.write: [0xA0, 0x04, 0x01, 0xA1]
|
||||
else:
|
||||
- uart.write: [0xA0, 0x04, 0x03, 0xA1]
|
||||
turn_off_action:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_topic}/relay1/state"
|
||||
payload: "OFF"
|
||||
- if:
|
||||
condition:
|
||||
switch.is_off: relay_2
|
||||
then:
|
||||
- uart.write: [0xA0, 0x04, 0x00, 0xA1]
|
||||
else:
|
||||
- uart.write: [0xA0, 0x04, 0x02, 0xA1]
|
||||
- platform: template
|
||||
name: "Dual L2 Relay"
|
||||
id: relay_2
|
||||
optimistic: true
|
||||
icon: "${relay_icon}"
|
||||
internal: true
|
||||
turn_on_action:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_topic}/relay2/state"
|
||||
payload: "ON"
|
||||
- if:
|
||||
condition:
|
||||
switch.is_off: relay_1
|
||||
then:
|
||||
- uart.write: [0xA0, 0x04, 0x02, 0xA1]
|
||||
else:
|
||||
- uart.write: [0xA0, 0x04, 0x03, 0xA1]
|
||||
turn_off_action:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_topic}/relay2/state"
|
||||
payload: "OFF"
|
||||
- if:
|
||||
condition:
|
||||
switch.is_off: relay_1
|
||||
then:
|
||||
- uart.write: [0xA0, 0x04, 0x00, 0xA1]
|
||||
else:
|
||||
- uart.write: [0xA0, 0x04, 0x01, 0xA1]
|
||||
|
||||
################################################################################
|
||||
# TEMPLATE OUTPUTS: drive the real relays when the light state changes
|
||||
################################################################################
|
||||
output:
|
||||
- platform: template
|
||||
id: light_output_1
|
||||
type: binary
|
||||
write_action:
|
||||
- lambda: |-
|
||||
if (state) id(relay_1).turn_on();
|
||||
else id(relay_1).turn_off();
|
||||
|
||||
- platform: template
|
||||
id: light_output_2
|
||||
type: binary
|
||||
write_action:
|
||||
- lambda: |-
|
||||
if (state) id(relay_2).turn_on();
|
||||
else id(relay_2).turn_off();
|
||||
|
||||
##########################################################################################
|
||||
# LIGHT COMPONENT
|
||||
# https://esphome.io/components/light/
|
||||
##########################################################################################
|
||||
light:
|
||||
- platform: binary
|
||||
name: "Light 1 (Right Hand Bunker Light)"
|
||||
id: light_1
|
||||
output: light_output_1
|
||||
|
||||
- platform: binary
|
||||
name: "Light 2 (Cool White Overhead Lights)"
|
||||
id: light_2
|
||||
output: light_output_2
|
||||
Reference in New Issue
Block a user