minor changes on led controller V1.2
This commit is contained in:
root
@@ -1,381 +0,0 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# CEILING FAN - BEDROOM 2
|
||||
# - 3 speed fan using Sonoff IFan02
|
||||
# - Also, single Light Output
|
||||
#
|
||||
# Controlled by a Sonoff IFan 02
|
||||
#
|
||||
# V1.0 - 2025-07-21 First Setup (and replacement of Tasmota)
|
||||
#
|
||||
# NOTES:
|
||||
# Command the fan with MQTT
|
||||
# ${mqtt_local_command_full_topic}/speed/set 1,2,3,0,+,-
|
||||
# ${mqtt_local_command_full_topic}/light/set ON,OFF
|
||||
# Status of the fan is in MQTT
|
||||
# ${mqtt_local_command_full_topic}/speed/state 1,2,3,0
|
||||
# ${mqtt_local_command_full_topic}/light/state ON,OFF
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-bedrm2ceilingfan"
|
||||
friendly_name: "Bedroom 2 Ceiling Fan"
|
||||
description_comment: "3 Speed Overhead Ceiling Fan Bedroom 2 :: Sonoff ifan02"
|
||||
device_area: "Bedroom 2" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Sonoff Technologies.Sonoff ifan02" # Project Details
|
||||
project_version: "v1.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords & Secrets
|
||||
api_key: !secret esp-api_key
|
||||
ota_pass: !secret esp-ota_pass
|
||||
static_ip_address: !secret esp-bedrm2ceilingfan_ip # unfortunately you can't use substitutions inside secrets names
|
||||
mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
|
||||
mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
|
||||
|
||||
# Device Settings
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
# MQTT LOCAL Controls
|
||||
mqtt_device_name: "bedroom2-ceilingfan"
|
||||
mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
|
||||
mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
|
||||
|
||||
# MQTT REMOTE Controls
|
||||
|
||||
# Button Naming & Icons
|
||||
|
||||
# Switch/Relay Naming & Icons
|
||||
#relay_icon: "mdi:lightbulb-group"
|
||||
light_1_name: "Fan Light"
|
||||
switch_2_name: "Fan 2 Relay"
|
||||
switch_3_name: "Fan 3 Relay"
|
||||
switch_4_name: "Fan 4 Relay"
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" # Appears on the esphome page in HA
|
||||
area: "${device_area}"
|
||||
on_boot: # This weird toggle thing makes sure the states get restored on reboot
|
||||
priority : -100
|
||||
then:
|
||||
- delay: 200ms
|
||||
#- fan.toggle: ifan02_fan
|
||||
#- fan.toggle: ifan02_fan
|
||||
#- delay: 200ms
|
||||
#- light.toggle: ifan02_light
|
||||
#- delay: 1ms
|
||||
#- light.toggle: ifan02_light
|
||||
#- delay: 1s
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_local_status_topic}/speed/state"
|
||||
payload: !lambda 'return to_string(id(speed_value));'
|
||||
# platformio_options:
|
||||
# build_flags:
|
||||
# - "-Os" # optimize for size
|
||||
# - "-Wl,--gc-sections" # drop unused code/data
|
||||
# - "-fno-exceptions" # strip C++ exceptaions
|
||||
# - "-fno-rtti" # strip C++ RTTI
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp01_1m # The original sonoff basic
|
||||
restore_from_flash: True # restore some values on reboot
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
|
||||
mdns:
|
||||
disabled: True # Disabling will make the build file smaller (and it is still available via static IP)
|
||||
|
||||
##########################################################################################
|
||||
# GLOBAL VARIABLES
|
||||
##########################################################################################
|
||||
globals:
|
||||
- id: speed_value
|
||||
type: int
|
||||
restore_value: yes
|
||||
initial_value: '0'
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}" # INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM, Serial control)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
##########################################################################################
|
||||
# MQTT COMMANDS
|
||||
# This adds device-specific MQTT command triggers to the common MQTT configuration.
|
||||
##########################################################################################
|
||||
mqtt:
|
||||
on_message:
|
||||
# Light control
|
||||
- topic: "${mqtt_local_command_topic}/light/set"
|
||||
payload: "ON"
|
||||
then:
|
||||
- light.turn_on: ifan02_light
|
||||
- topic: "${mqtt_local_command_topic}/light/set"
|
||||
payload: "OFF"
|
||||
then:
|
||||
- light.turn_off: ifan02_light
|
||||
|
||||
# Fan speed control (0–3) + ramp up/down (+ / -)
|
||||
- topic: "${mqtt_local_command_topic}/speed/set"
|
||||
then:
|
||||
# 1) Compute new speed_value based on payload
|
||||
- lambda: |-
|
||||
std::string s = x;
|
||||
int val = id(speed_value);
|
||||
if (s == "+") {
|
||||
val++;
|
||||
} else if (s == "-") {
|
||||
val--;
|
||||
} else if (s.size() && isdigit(s[0])) {
|
||||
val = atoi(s.c_str());
|
||||
} else {
|
||||
ESP_LOGE("ifan02", "Invalid speed payload: '%s'", x.c_str());
|
||||
return;
|
||||
}
|
||||
// Clamp between 0 and 3
|
||||
if (val < 0) val = 0;
|
||||
if (val > 3) val = 3;
|
||||
id(speed_value) = val;
|
||||
|
||||
# 2) Drive the fan based on the new value
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(speed_value) == 0;'
|
||||
then:
|
||||
- fan.turn_off: ifan02_fan
|
||||
else:
|
||||
- fan.turn_on:
|
||||
id: ifan02_fan
|
||||
speed: !lambda 'return id(speed_value);'
|
||||
|
||||
##########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
##########################################################################################
|
||||
# Sonoff ifan02 has relays, but they don't need to be shown in HA because
|
||||
# the speed of the fan is the important part (and combinations of the relays give that)
|
||||
##########################################################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "${switch_3_name}"
|
||||
pin: GPIO4
|
||||
id: fan3sw
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
internal: true
|
||||
- platform: gpio
|
||||
name: "${switch_2_name}"
|
||||
pin: GPIO5
|
||||
id: fan2sw
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
internal: true
|
||||
- platform: gpio
|
||||
name: "${switch_4_name}"
|
||||
pin: GPIO15
|
||||
id: fan4sw
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
internal: true
|
||||
|
||||
##########################################################################################
|
||||
# SELECT COMPONENT
|
||||
# https://esphome.io/components/select/index.html
|
||||
##########################################################################################
|
||||
select:
|
||||
- platform: template
|
||||
name: "Bedroom 2 Fan Speed"
|
||||
id: bedroom2_fan_speed_select
|
||||
options:
|
||||
- "Off"
|
||||
- "Low"
|
||||
- "Medium"
|
||||
- "High"
|
||||
update_interval: 1s
|
||||
lambda: |-
|
||||
switch (id(speed_value)) {
|
||||
case 1: return esphome::optional<std::string>("Low");
|
||||
case 2: return esphome::optional<std::string>("Medium");
|
||||
case 3: return esphome::optional<std::string>("High");
|
||||
default: return esphome::optional<std::string>("Off");
|
||||
}
|
||||
set_action:
|
||||
# OFF
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return x == "Off";'
|
||||
then:
|
||||
- lambda: |-
|
||||
id(speed_value) = 0;
|
||||
- fan.turn_off: ifan02_fan
|
||||
# LOW (1)
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return x == "Low";'
|
||||
then:
|
||||
- lambda: |-
|
||||
id(speed_value) = 1;
|
||||
- fan.turn_on:
|
||||
id: ifan02_fan
|
||||
speed: 1
|
||||
# MEDIUM (2)
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return x == "Medium";'
|
||||
then:
|
||||
- lambda: |-
|
||||
id(speed_value) = 2;
|
||||
- fan.turn_on:
|
||||
id: ifan02_fan
|
||||
speed: 2
|
||||
# HIGH (3)
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return x == "High";'
|
||||
then:
|
||||
- lambda: |-
|
||||
id(speed_value) = 3;
|
||||
- fan.turn_on:
|
||||
id: ifan02_fan
|
||||
speed: 3
|
||||
|
||||
################################################################################
|
||||
# TEMPLATE OUTPUTS: drive the real relays when the states change
|
||||
################################################################################
|
||||
output:
|
||||
- platform: gpio
|
||||
pin: GPIO12
|
||||
id: lightrelay
|
||||
- platform: template
|
||||
type: float
|
||||
id: fan_decode
|
||||
write_action:
|
||||
- lambda: |-
|
||||
if (state < 0.25) {
|
||||
id(fan2sw).turn_off();
|
||||
id(fan3sw).turn_off();
|
||||
id(fan4sw).turn_off();
|
||||
}
|
||||
else if (state < 0.5) {
|
||||
id(fan2sw).turn_on();
|
||||
id(fan3sw).turn_off();
|
||||
id(fan4sw).turn_off();
|
||||
}
|
||||
else if (state < 0.75) {
|
||||
id(fan2sw).turn_on();
|
||||
id(fan3sw).turn_on();
|
||||
id(fan4sw).turn_off();
|
||||
}
|
||||
else {
|
||||
id(fan2sw).turn_on();
|
||||
id(fan3sw).turn_off();
|
||||
id(fan4sw).turn_on();
|
||||
}
|
||||
|
||||
##########################################################################################
|
||||
# LIGHT COMPONENT
|
||||
# https://esphome.io/components/light/
|
||||
##########################################################################################
|
||||
light:
|
||||
- platform: binary
|
||||
name: "${light_1_name}"
|
||||
output: lightrelay
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
id: ifan02_light
|
||||
# publish status updates when the light turns on/off:
|
||||
on_turn_on:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_local_status_topic}/light/state"
|
||||
payload: "ON"
|
||||
on_turn_off:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_local_status_topic}/light/state"
|
||||
payload: "OFF"
|
||||
|
||||
##########################################################################################
|
||||
# FAN COMPONENT
|
||||
# https://esphome.io/components/fan/index.html
|
||||
##########################################################################################
|
||||
fan:
|
||||
- platform: speed
|
||||
output: fan_decode
|
||||
name: "Fan"
|
||||
id: ifan02_fan
|
||||
speed_count: 3
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
# whenever you explicitly set a speed (1–3):
|
||||
on_speed_set:
|
||||
- lambda: |-
|
||||
id(speed_value) = x;
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_local_status_topic}/speed/state"
|
||||
payload: !lambda 'return to_string(id(speed_value));'
|
||||
# whenever the fan goes fully off:
|
||||
on_turn_off:
|
||||
- lambda: |-
|
||||
id(speed_value) = 0;
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_local_status_topic}/speed/state"
|
||||
payload: "0"
|
||||
# whenever the fan goes off→on (e.g. via HA’s Fan switch):
|
||||
on_turn_on:
|
||||
- lambda: |-
|
||||
// bump 0→1 if we were off
|
||||
if (id(speed_value) == 0) id(speed_value) = 1;
|
||||
- fan.turn_on:
|
||||
id: ifan02_fan
|
||||
speed: !lambda 'return id(speed_value);'
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_local_status_topic}/speed/state"
|
||||
payload: !lambda 'return to_string(id(speed_value));'
|
||||
@@ -1,265 +0,0 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# BEDROOM 3 FAN SWITCH
|
||||
#
|
||||
# Controlled by a Zemismart KS-811 Triple push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# V1.0 - 2025-07-23 First Setup (and replacement of Tasmota)
|
||||
#
|
||||
# NOTES
|
||||
# - Switch for Ceiling Fan
|
||||
# - 3 Switches, Up, Down and Off
|
||||
# - Remote commands to the fan ${mqtt_remote_command_full_topic}/speed/set 1,2,3,0,+,-
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-bedrm3fanswitch"
|
||||
friendly_name: "Bedroom 3 Fan Wall Switch (3)"
|
||||
description_comment: "Switch for Bedroom 3 Ceiling Fan using Zemismart KS-811 Triple Push Button. Speed Up (1), Speed Down (2), Fan Off (3)"
|
||||
device_area: "Bedroom 3" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811-3 (Triple)" # Project Details
|
||||
project_version: "v1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
#entity_prefix: "Main Bathroom" # Simple device name where we want to prefix a sensor or switch, eg "Load" Current.
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-bedrm3fanswitch_ip
|
||||
mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
|
||||
mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
|
||||
|
||||
# Device Settings
|
||||
#relay_icon: "mdi:heating-coil"
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
# MQTT LOCAL Controls
|
||||
#mqtt_device_name: "bedroom2-ceilingfan-switch"
|
||||
#mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
|
||||
#mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
|
||||
|
||||
# MQTT REMOTE Controls
|
||||
mqtt_remote_device_name: "bedroom3-ceilingfan"
|
||||
mqtt_remote_device_command_topic: "${mqtt_local_command_main_topic}/${mqtt_remote_device_name}/speed/set"
|
||||
mqtt_remote_device_command1: "+"
|
||||
mqtt_remote_device_command2: "-"
|
||||
mqtt_remote_device_command3: "0"
|
||||
mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_remote_device_name}/speed/state" # Topic we will use to view status locally without HA
|
||||
|
||||
# Button Naming & Icons
|
||||
|
||||
# Switch/Relay Naming & Icons
|
||||
#relay_icon: "mdi:heating-coil"
|
||||
switch_1_name: "Fan Speed Up" # This is virtual only, no power connected to 1st relay
|
||||
switch_2_name: "Fan Speed Down" # This is virtual only, no power connected to 2nd relay
|
||||
switch_3_name: "Fan Off" # This is virtual only, no power connected to 3rd relay
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: ${device_name}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #Appears on the esphome page in HA
|
||||
area: ${device_area}
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
platformio_options:
|
||||
build_flags:
|
||||
- "-Os" # optimize for size
|
||||
- "-Wl,--gc-sections" # drop unused code/data
|
||||
- "-fno-exceptions" # strip C++ exceptions
|
||||
- "-fno-rtti" # strip C++ RTTI
|
||||
# on_boot:
|
||||
# priority: 200
|
||||
# then:
|
||||
# - switch.turn_on: Relay_3
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
##########################################################################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
##########################################################################################
|
||||
# Status LED for KS-811 is GPIO02
|
||||
##########################################################################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO02
|
||||
inverted: yes
|
||||
|
||||
##########################################################################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
##########################################################################################
|
||||
# Buttons for KS-811-3 are GPIO16, GPIO05, GPIO04
|
||||
##########################################################################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 1: ${switch_1_name}"
|
||||
on_press:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_remote_device_command_topic}"
|
||||
payload: "${mqtt_remote_device_command1}"
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 2: ${switch_2_name}"
|
||||
on_press:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_remote_device_command_topic}"
|
||||
payload: "${mqtt_remote_device_command2}"
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO4
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 3: ${switch_3_name}"
|
||||
on_press:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_remote_device_command_topic}"
|
||||
payload: "${mqtt_remote_device_command3}"
|
||||
|
||||
##########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
##########################################################################################
|
||||
# Relays for KS-811-3 are GPIO13, GPIO12, GPIO14
|
||||
##########################################################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
- platform: gpio
|
||||
name: "Relay 2: ${switch_2_name}"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
- platform: gpio
|
||||
name: "Relay 3: ${switch_3_name}"
|
||||
pin: GPIO14
|
||||
id: Relay_3
|
||||
|
||||
mqtt:
|
||||
on_message:
|
||||
- topic: "${mqtt_local_status_topic}"
|
||||
then:
|
||||
- lambda: |-
|
||||
int val = atoi(x.c_str());
|
||||
ESP_LOGI("fan_switch", "Received requested speed: %d", val);
|
||||
|
||||
// Desired states
|
||||
bool r1 = false;
|
||||
bool r2 = false;
|
||||
bool r3 = false;
|
||||
|
||||
switch (val) {
|
||||
case 1:
|
||||
r3 = true;
|
||||
break;
|
||||
case 2:
|
||||
r2 = true;
|
||||
r3 = true;
|
||||
break;
|
||||
case 3:
|
||||
r1 = true;
|
||||
r2 = true;
|
||||
r3 = true;
|
||||
break;
|
||||
case 0:
|
||||
default:
|
||||
// all remain false
|
||||
break;
|
||||
}
|
||||
|
||||
// Only change relays if necessary
|
||||
if (id(Relay_1).state != r1) {
|
||||
if (r1) {
|
||||
id(Relay_1).turn_on();
|
||||
} else {
|
||||
id(Relay_1).turn_off();
|
||||
}
|
||||
}
|
||||
|
||||
if (id(Relay_2).state != r2) {
|
||||
if (r2) {
|
||||
id(Relay_2).turn_on();
|
||||
} else {
|
||||
id(Relay_2).turn_off();
|
||||
}
|
||||
}
|
||||
|
||||
if (id(Relay_3).state != r3) {
|
||||
if (r3) {
|
||||
id(Relay_3).turn_on();
|
||||
} else {
|
||||
id(Relay_3).turn_off();
|
||||
}
|
||||
}
|
||||
@@ -1,265 +0,0 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# BEDROOM 3 FAN SWITCH
|
||||
#
|
||||
# Controlled by a Zemismart KS-811 Triple push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# V1.0 - 2025-07-23 First Setup (and replacement of Tasmota)
|
||||
#
|
||||
# NOTES
|
||||
# - Switch for Ceiling Fan
|
||||
# - 3 Switches, Up, Down and Off
|
||||
# - Remote commands to the fan ${mqtt_remote_command_full_topic}/speed/set 1,2,3,0,+,-
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-bedrm3fanswitch"
|
||||
friendly_name: "Bedroom 3 Fan Wall Switch (3)"
|
||||
description_comment: "Switch for Bedroom 3 Ceiling Fan using Zemismart KS-811 Triple Push Button. Speed Up (1), Speed Down (2), Fan Off (3)"
|
||||
device_area: "Bedroom 3" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811-3 (Triple)" # Project Details
|
||||
project_version: "v1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
#entity_prefix: "Main Bathroom" # Simple device name where we want to prefix a sensor or switch, eg "Load" Current.
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-bedrm3fanswitch_ip
|
||||
mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
|
||||
mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
|
||||
|
||||
# Device Settings
|
||||
#relay_icon: "mdi:heating-coil"
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
# MQTT LOCAL Controls
|
||||
#mqtt_device_name: "bedroom2-ceilingfan-switch"
|
||||
#mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
|
||||
#mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
|
||||
|
||||
# MQTT REMOTE Controls
|
||||
mqtt_remote_device_name: "bedroom3-ceilingfan"
|
||||
mqtt_remote_device_command_topic: "${mqtt_local_command_main_topic}/${mqtt_remote_device_name}/speed/set"
|
||||
mqtt_remote_device_command1: "+"
|
||||
mqtt_remote_device_command2: "-"
|
||||
mqtt_remote_device_command3: "0"
|
||||
mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_remote_device_name}/speed/state" # Topic we will use to view status locally without HA
|
||||
|
||||
# Button Naming & Icons
|
||||
|
||||
# Switch/Relay Naming & Icons
|
||||
#relay_icon: "mdi:heating-coil"
|
||||
switch_1_name: "Fan Speed Up" # This is virtual only, no power connected to 1st relay
|
||||
switch_2_name: "Fan Speed Down" # This is virtual only, no power connected to 2nd relay
|
||||
switch_3_name: "Fan Off" # This is virtual only, no power connected to 3rd relay
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: ${device_name}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #Appears on the esphome page in HA
|
||||
area: ${device_area}
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
platformio_options:
|
||||
build_flags:
|
||||
- "-Os" # optimize for size
|
||||
- "-Wl,--gc-sections" # drop unused code/data
|
||||
- "-fno-exceptions" # strip C++ exceptions
|
||||
- "-fno-rtti" # strip C++ RTTI
|
||||
# on_boot:
|
||||
# priority: 200
|
||||
# then:
|
||||
# - switch.turn_on: Relay_3
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
##########################################################################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
##########################################################################################
|
||||
# Status LED for KS-811 is GPIO02
|
||||
##########################################################################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO02
|
||||
inverted: yes
|
||||
|
||||
##########################################################################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
##########################################################################################
|
||||
# Buttons for KS-811-3 are GPIO16, GPIO05, GPIO04
|
||||
##########################################################################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 1: ${switch_1_name}"
|
||||
on_press:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_remote_device_command_topic}"
|
||||
payload: "${mqtt_remote_device_command1}"
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 2: ${switch_2_name}"
|
||||
on_press:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_remote_device_command_topic}"
|
||||
payload: "${mqtt_remote_device_command2}"
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO4
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 3: ${switch_3_name}"
|
||||
on_press:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_remote_device_command_topic}"
|
||||
payload: "${mqtt_remote_device_command3}"
|
||||
|
||||
##########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
##########################################################################################
|
||||
# Relays for KS-811-3 are GPIO13, GPIO12, GPIO14
|
||||
##########################################################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
- platform: gpio
|
||||
name: "Relay 2: ${switch_2_name}"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
- platform: gpio
|
||||
name: "Relay 3: ${switch_3_name}"
|
||||
pin: GPIO14
|
||||
id: Relay_3
|
||||
|
||||
mqtt:
|
||||
on_message:
|
||||
- topic: "${mqtt_local_status_topic}"
|
||||
then:
|
||||
- lambda: |-
|
||||
int val = atoi(x.c_str());
|
||||
ESP_LOGI("fan_switch", "Received requested speed: %d", val);
|
||||
|
||||
// Desired states
|
||||
bool r1 = false;
|
||||
bool r2 = false;
|
||||
bool r3 = false;
|
||||
|
||||
switch (val) {
|
||||
case 1:
|
||||
r3 = true;
|
||||
break;
|
||||
case 2:
|
||||
r2 = true;
|
||||
r3 = true;
|
||||
break;
|
||||
case 3:
|
||||
r1 = true;
|
||||
r2 = true;
|
||||
r3 = true;
|
||||
break;
|
||||
case 0:
|
||||
default:
|
||||
// all remain false
|
||||
break;
|
||||
}
|
||||
|
||||
// Only change relays if necessary
|
||||
if (id(Relay_1).state != r1) {
|
||||
if (r1) {
|
||||
id(Relay_1).turn_on();
|
||||
} else {
|
||||
id(Relay_1).turn_off();
|
||||
}
|
||||
}
|
||||
|
||||
if (id(Relay_2).state != r2) {
|
||||
if (r2) {
|
||||
id(Relay_2).turn_on();
|
||||
} else {
|
||||
id(Relay_2).turn_off();
|
||||
}
|
||||
}
|
||||
|
||||
if (id(Relay_3).state != r3) {
|
||||
if (r3) {
|
||||
id(Relay_3).turn_on();
|
||||
} else {
|
||||
id(Relay_3).turn_off();
|
||||
}
|
||||
}
|
||||
@@ -19,7 +19,7 @@
|
||||
# ------------------------------------------
|
||||
# OPERATION (as at V1.1)
|
||||
# ------------------------------------------
|
||||
# 1. General Purpuse LED controller
|
||||
# 1. General Purpose LED controller
|
||||
# 2. Designed for a Sinilink XY-VFMS board that has a mosfet output and supposedly will handle
|
||||
# 5A and a DC input of 5V-36V.
|
||||
# 3. Has global setting for MAX % PWM output for the LEDs so you can give them a longer life.
|
||||
|
||||
Reference in New Issue
Block a user