more esphome pmb 6 button switch updates
This commit is contained in:
root
@@ -22,7 +22,7 @@
|
||||
# then hold down I00 button. I think GPIO12 connection is preventing the flash process.
|
||||
# 2. OTA flash to an Existing Tasmota device is likely a bit hard with and ESP32 as they
|
||||
# expect a signed Tasmota binary... and partition layout needs to be fixed anyway
|
||||
# 3. EspHome warns on compiling: "legacy adc driver is deprecated, please migrate to use
|
||||
# 3. ESPHome warns on compiling: "legacy adc driver is deprecated, please migrate to use
|
||||
# esp_adc/adc_oneshot.h and esp_adc/adc_continuous.h for oneshot mode and continuous mode
|
||||
# drivers respectively" [-Wcpp]" (I'm not bothered with this)
|
||||
# 4. Normally I'd include SNTP for timing functions, and uptime diagnostics etc.
|
||||
@@ -65,6 +65,10 @@ substitutions:
|
||||
mqtt_password: !secret ha_mqtt_password
|
||||
mqtt_topic: "esphome" # main topic for the mqtt server, call it what you like
|
||||
|
||||
# Web Server Settings
|
||||
web_server_username: !secret web_server_username
|
||||
web_server_password: !secret web_server_password
|
||||
|
||||
# Switch Naming
|
||||
switch_1_name: "Red"
|
||||
switch_2_name: "White"
|
||||
@@ -81,8 +85,8 @@ substitutions:
|
||||
# Device Settings
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
pwm_freq: "1000Hz" # espHome default is 1000Hz, but will go much higher... (not much point for a switch LED)
|
||||
ledc_bits: "12" # espHome default resolution is 12 bits
|
||||
pwm_freq: "1000Hz" # ESPHome default is 1000Hz, but will go much higher... (not much point for a switch LED)
|
||||
ledc_bits: "12" # ESPHome default resolution is 12 bits
|
||||
|
||||
# Network reconnect every x hours to ensure best access point
|
||||
# This is my own script. No need to use if only one AP or it is always fixed.
|
||||
@@ -105,7 +109,8 @@ substitutions:
|
||||
ipv6_enable: "false"
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# PACKAGES
|
||||
# Included Common Packages from other files.
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
# NOTE: ALL COMMENTED AS FOR THIS TEST EVERYTHING IS IN ONE YAML FILE (except no SNTP)
|
||||
@@ -136,7 +141,7 @@ substitutions:
|
||||
# local_update_interval: "${update_interval}"
|
||||
|
||||
##########################################################################################
|
||||
# Common Wifi Settings
|
||||
# WIFI COMPONENT
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
@@ -168,8 +173,8 @@ wifi:
|
||||
#captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails
|
||||
|
||||
##########################################################################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
# ESPHome OTA UPDATES
|
||||
# https://esphome.io/components/ota/esphome.html
|
||||
##########################################################################################
|
||||
ota:
|
||||
- platform: esphome
|
||||
@@ -177,14 +182,14 @@ ota:
|
||||
version: 2
|
||||
|
||||
##########################################################################################
|
||||
# Safe Mode
|
||||
# SAFE MODE
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
##########################################################################################
|
||||
safe_mode:
|
||||
|
||||
##########################################################################################
|
||||
# Network
|
||||
# NETWORK COMPONENT
|
||||
# global configuration for all types of networks
|
||||
# https://esphome.io/components/network.html
|
||||
##########################################################################################
|
||||
@@ -225,7 +230,7 @@ script:
|
||||
- script.execute: random_reconnect
|
||||
|
||||
##########################################################################################
|
||||
# MQTT Monitoring
|
||||
# MQTT CLIENT COMPONENT
|
||||
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
||||
# MUST also have api enabled if you enable MQTT!
|
||||
##########################################################################################
|
||||
@@ -240,6 +245,19 @@ mqtt:
|
||||
reboot_timeout: 0s # same for MQTT
|
||||
|
||||
##########################################################################################
|
||||
# WEB SERVER COMPONENT
|
||||
# https://esphome.io/components/web_server.html
|
||||
# Web Portal for display and monitoring
|
||||
# Turning this off is maybe a good idea to save resources, especially on an esp8266.
|
||||
##########################################################################################
|
||||
web_server:
|
||||
port: 80
|
||||
auth:
|
||||
username: ${web_server_username} # probably a good idea to secure it
|
||||
password: ${web_server_password}
|
||||
|
||||
##########################################################################################
|
||||
# NATIVE API COMPONENT
|
||||
# Enable the Home Assistant API
|
||||
# https://esphome.io/components/api.html
|
||||
##########################################################################################
|
||||
@@ -249,17 +267,17 @@ api:
|
||||
reboot_timeout: 0s # disables watchdog reboot on API failure
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# ESPHome CORE CONFIGURATION
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: ${device_name}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} # Appears on the esphome page in HA
|
||||
comment: ${description_comment} # Appears on the ESPHome page in HA
|
||||
area: ${device_area}
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# ESP PLATFORM AND FRAMEWORK
|
||||
# https://esphome.io/components/esp32.html
|
||||
##########################################################################################
|
||||
# Suggest using ESP-IDF Framework. Changes might need need to be cable flashed here to
|
||||
@@ -312,8 +330,9 @@ globals:
|
||||
initial_value: 'false'
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# LOGGER COMPONENT
|
||||
# https://esphome.io/components/logger.html
|
||||
# Logs all log messages through the serial port and through MQTT topics.
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: ${log_level} #INFO Level suggested, or DEBUG for testing
|
||||
@@ -336,7 +355,7 @@ status_led:
|
||||
##########################################################################################
|
||||
# These are the input buttons on GPIO.
|
||||
# No "mode: INPUT_PULLUP" needed as they have external pullups
|
||||
# Switches pull to GND so "inverted:true" for espHome to report ON when pressed.
|
||||
# Switches pull to GND so "inverted:true" for ESPHome to report ON when pressed.
|
||||
# They will toggle the virtual relays when pressed (the vrelays will toggle the LEDs)
|
||||
##########################################################################################
|
||||
binary_sensor:
|
||||
@@ -708,7 +727,7 @@ sensor:
|
||||
device_class: ""
|
||||
|
||||
##########################################################################################
|
||||
# Text Sensors
|
||||
# TEXT SENSOR COMPONENT
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
##########################################################################################
|
||||
text_sensor:
|
||||
@@ -739,14 +758,14 @@ text_sensor:
|
||||
# BUTTON COMPONENT
|
||||
# https://esphome.io/components/button/
|
||||
##########################################################################################
|
||||
# Diagnostic buttons ued here and non-active, activated if needed in HA
|
||||
# Diagnostic buttons ued here and non-active by default, activated if needed in HA
|
||||
##########################################################################################
|
||||
button:
|
||||
## DIAGNOSTIC ONLY BUTTONS BELOW ##
|
||||
- platform: safe_mode
|
||||
name: "Safe Mode Restart:"
|
||||
entity_category: "diagnostic"
|
||||
disabled_by_default: true
|
||||
disabled_by_default: true # Need to activate them in HA
|
||||
- platform: restart
|
||||
name: "Restart:"
|
||||
entity_category: "diagnostic"
|
||||
|
||||
Reference in New Issue
Block a user