various incl esphome devices
This commit is contained in:
root
244
esphome/esp-athombulbflasher.yaml
Normal file
244
esphome/esp-athombulbflasher.yaml
Normal file
@@ -0,0 +1,244 @@
|
||||
############################################
|
||||
#############################################
|
||||
# ATHOM 15W RGBWW Bulb Flasher
|
||||
#
|
||||
# # V1.0 2025-02-15 Initial Version
|
||||
#
|
||||
# Device https://www.athom.tech/blank-1/15w-color-bulb
|
||||
#
|
||||
# DESCRIPTION
|
||||
# Starts up and flashes a RGBWW lightbulb a white colour
|
||||
# On and off time (duty cycle) is configurable
|
||||
# Colour Temp (in K) is configurable
|
||||
# There is no fading between transitions
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
|
||||
#############################################
|
||||
# USER VARIABLE SUBSTITUTIONS
|
||||
# Give the device a useful name & description here
|
||||
# and change values accordingly.
|
||||
#############################################
|
||||
substitutions:
|
||||
devicename: esp-athombulbflasher
|
||||
friendly_name: "Flasher for Athom 15W Bulb"
|
||||
description_comment: "Athom RGBWW light bulb that will flash on boot and allow colour temp & duty cycle adjustment"
|
||||
|
||||
# Adjust the color temperature here (200 mired is approx 5000k
|
||||
white_temp: "3000K"
|
||||
|
||||
# Adjust the ON/OFF times for flashing.
|
||||
# 600ms on, 400ms off => 60% ON, 40% OFF duty cycle
|
||||
on_time_ms: "500ms"
|
||||
off_time_ms: "500ms"
|
||||
|
||||
|
||||
#############################################
|
||||
# OTHER VARIABLE SUBSTITUTIONS
|
||||
# Give the device a useful name & description here
|
||||
# and change values accordingly.
|
||||
#############################################
|
||||
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
api_key: !secret esp-athombulbflasher_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-athombulbflasher_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
wifi_ssid: !secret wifi_ssid
|
||||
wifi_password: !secret wifi_password
|
||||
fallback_ap_password: !secret fallback_ap_password
|
||||
|
||||
# Add these if we are giving it a static ip, or remove them in the Wifi section
|
||||
#static_ip_address: !secret esp-athombulbflasher_static_ip
|
||||
#static_ip_gateway: !secret esp-athombulbflasher_gateway
|
||||
#static_ip_subnet: !secret esp-athombulbflasher_subnet
|
||||
|
||||
#mqtt_server: !secret mqtt_server
|
||||
#mqtt_username: !secret mqtt_username
|
||||
#mqtt_password: !secret mqtt_password
|
||||
#mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
|
||||
|
||||
# Add these if we are using the internal web server (this is pretty processor intensive)
|
||||
#web_server_username: !secret web_server_username
|
||||
#web_server_password: !secret web_server_password
|
||||
|
||||
#update_interval: 60s # update time for for general sensors etc
|
||||
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} # appears on the esphome page in HA
|
||||
on_boot:
|
||||
priority: 800
|
||||
then:
|
||||
- light.turn_on:
|
||||
id: my_light
|
||||
effect: "Flashing White"
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: INFO # INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# Enable the Home Assistant API
|
||||
# https://esphome.io/components/api.html
|
||||
#############################################
|
||||
api:
|
||||
encryption:
|
||||
key: ${api_key}
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
#############################################
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: ${ota_pass}
|
||||
|
||||
#############################################
|
||||
# Safe Mode
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
#############################################
|
||||
safe_mode:
|
||||
|
||||
#############################################
|
||||
# Wifi Settings
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
# NONE (least power saving, Default for ESP8266)
|
||||
# LIGHT (Default for ESP32)
|
||||
# HIGH (most power saving)
|
||||
#############################################
|
||||
wifi:
|
||||
ssid: ${wifi_ssid}
|
||||
password: ${wifi_password}
|
||||
#power_save_mode: LIGHT # https://esphome.io/components/wifi.html#wifi-power-save-mode
|
||||
#manual_ip: # optional static IP address
|
||||
#static_ip: ${static_ip_address}
|
||||
#gateway: ${static_ip_gateway}
|
||||
#subnet: ${static_ip_subnet}
|
||||
ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
ssid: ${devicename} AP
|
||||
password: ${fallback_ap_password}
|
||||
ap_timeout: 30min # Time until it brings up fallback AP. default is 1min
|
||||
|
||||
captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails
|
||||
|
||||
|
||||
#############################################
|
||||
# MQTT Monitoring
|
||||
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
||||
# MUST also have api enabled if you enable MQTT
|
||||
#############################################
|
||||
#mqtt:
|
||||
#broker: ${mqtt_server}
|
||||
#topic_prefix: ${mqtt_topic}/${devicename}
|
||||
#username: ${mqtt_username}
|
||||
#password: ${mqtt_password}
|
||||
##discovery: True # enable entity discovery (true is default)
|
||||
##discover_ip: True # enable device discovery (true is default)
|
||||
|
||||
|
||||
#############################################
|
||||
# Web Portal for display and monitoring
|
||||
# Turning this off is probably a good idea to save resources.
|
||||
# https://esphome.io/components/web_server.html
|
||||
#############################################
|
||||
#web_server:
|
||||
# port: 80
|
||||
# auth:
|
||||
# username: ${web_server_username} # probably a good idea to secure it
|
||||
# password: ${web_server_password}
|
||||
|
||||
|
||||
|
||||
# ---------------------------------------------------------
|
||||
# OUTPUTS: 5 x PWM channels for the Athom 15W RGBWW bulb
|
||||
# ---------------------------------------------------------
|
||||
output:
|
||||
- platform: esp8266_pwm
|
||||
id: output_red
|
||||
pin: GPIO4
|
||||
frequency: 1000 Hz
|
||||
|
||||
- platform: esp8266_pwm
|
||||
id: output_green
|
||||
pin: GPIO5
|
||||
frequency: 1000 Hz
|
||||
|
||||
- platform: esp8266_pwm
|
||||
id: output_blue
|
||||
pin: GPIO12
|
||||
frequency: 1000 Hz
|
||||
|
||||
# Typically one channel is cold white...
|
||||
- platform: esp8266_pwm
|
||||
id: output_cold_white
|
||||
pin: GPIO14
|
||||
frequency: 1000 Hz
|
||||
|
||||
# ...and one channel is warm white (inverted on GPIO13).
|
||||
- platform: esp8266_pwm
|
||||
id: output_warm_white
|
||||
pin: GPIO13
|
||||
frequency: 1000 Hz
|
||||
inverted: true
|
||||
|
||||
# ---------------------------------------------------------
|
||||
# LIGHT COMPONENT: RGBWW + a strobe effect for flashing
|
||||
# ---------------------------------------------------------
|
||||
light:
|
||||
- platform: rgbww
|
||||
name: ${friendly_name}
|
||||
id: my_light
|
||||
red: output_red
|
||||
green: output_green
|
||||
blue: output_blue
|
||||
cold_white: output_cold_white
|
||||
warm_white: output_warm_white
|
||||
|
||||
# Typical white temperature mapping for RGBWW
|
||||
cold_white_color_temperature: 6500 K
|
||||
warm_white_color_temperature: 2700 K
|
||||
|
||||
# Ensure it always powers on (and with our desired effect).
|
||||
restore_mode: ALWAYS_ON
|
||||
|
||||
# You can omit this or set it to zero for no fade on effect changes.
|
||||
default_transition_length: 0s
|
||||
|
||||
# The custom strobe effect for flashing white
|
||||
effects:
|
||||
- strobe:
|
||||
name: "Flashing White"
|
||||
colors:
|
||||
# Note the Kelvin value is replaced at compile time:
|
||||
- state: True
|
||||
brightness: 100%
|
||||
color_temperature: "${white_temp}"
|
||||
duration: ${on_time_ms}
|
||||
- state: False
|
||||
brightness: 0%
|
||||
color_temperature: "${white_temp}"
|
||||
duration: ${off_time_ms}
|
||||
|
||||
Reference in New Issue
Block a user