esphome downstairs bath lightswitch

esphome/esp-downstbathswitch.yaml

@@ -0,0 +1,265 @@
+#############################################
+#############################################
+# MASTER BATHROOM HEATED TOWEL RAIL
+# Controlled by a Sonoff Basic
+#
+# V1.0 2025-02-14 Initial Version
+# 
+# INSTRUCTIONS
+# - It allows a heated towel rail device to work in a standalone operation
+# - On startup, it will turn on for 2 hours then go into timer mode (this allows you to just turn it on to get some heat immediately)
+# - The timer has a morning and evening time (but no weekday/weekend setting)
+# - Default values are 5am-7am and 9pm-Midnight (as this suits our use case)
+# - It uses SNTP for time setting (but obviously only if wifi & networking are working)
+# - It will default to an internal timer if no wifi. To reset internal timer, reboot the device at 12pm (noon)
+# - If on a network and there is a MQTT server, you can set the 4 on/off times via MQTT (See below commands)
+# - You can set 4 modes ON/OFF/TIMER/STARTUP via MQTT
+# - Any new timer times set via MQTT will be remembered though a reboot
+# - On a reboot, the device will always turn on for the Startup Duration (STARTUP mode, default 2 hours)
+# - TIMER mode will always be switched on after startup mode is complete
+# - If you need it ON continuously with no MQTT, toggle power ON/OFF 4 times within 20 seconds (with ~2 secs in between to allow it to boot)
+#
+# MQTT Commands 
+#     Values will be set in place on the update_interval time, not immediately
+#     Use 00:00 in 24hr format for time setting.  Note there is no weekday/weekend setting
+# mqtt_timer_topic/morning-on/06:00   : Time towel rail will go on
+# mqtt_timer_topic/morning-off/08:00  : Time towel rail will go off
+# mqtt_timer_topic/evening-on/09:00   : Time towel rail will go on
+# mqtt_timer_topic/evening-off/00:00  : Time towel rail will go off
+# mqtt_timer_topic/operation/ON       : Towel rail permanently on
+# mqtt_timer_topic/operation/OFF      : Towel rail permanently off
+# mqtt_timer_topic/operation/TIMER    : Towel rail will obey timer settings
+# mqtt_timer_topic/operation/STARTUP  : Turn on for 2 hours then TIMER (also on startup)
+#
+#############################################
+#############################################
+
+#############################################
+# VARIABLE SUBSTITUTIONS
+# Give the device a useful name & description here
+# and change values accordingly.
+#############################################
+substitutions:
+  
+  #mqtt_timer_topic: "viewroad-commands/masterbath-towelrail" # Topics you will use to change stuff
+  #startup_duration: "120" # Minutes to stay ON in STARTUP mode before reverting to TIMER
+  #timezone: "Pacific/Auckland" # For setting clock with snmp
+
+  devicename: "esp-downstbathswitch"
+  friendly_name: "Downstairs Bath Lightswitch"
+  description_comment: "esp-downstbathswitch"
+
+  # If NOT using a secrets file, just replace these with the passwords etc (in quotes)
+  api_key: !secret esp-downstbathswitch_api_key # unfortunately you can't use substitutions inside secrets names
+  ota_pass: !secret esp-downstbathswitch_ota_pass # unfortunately you can't use substitutions inside secrets names
+  wifi_ssid: !secret ha_wifi_ssid
+  wifi_password: !secret ha_wifi_password
+  fallback_ap_password: !secret fallback_ap_password
+  
+  # Add these if we are giving it a static ip, or remove them in the Wifi section
+  static_ip_address: !secret esp-downstbathswitch_ip
+  static_ip_gateway: !secret ha_gateway
+  static_ip_subnet: !secret ha_subnet
+
+  mqtt_server: !secret ha_mqtt_server
+  mqtt_username: !secret ha_mqtt_username
+  mqtt_password: !secret ha_mqtt_password
+  mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
+
+  # Add these if we are using the internal web server (this is pretty processor intensive)
+  #web_server_username: !secret web_server_username
+  #web_server_password: !secret web_server_password
+
+  update_interval: 60s # update time for for general sensors etc
+
+
+#############################################
+# ESPHome
+# https://esphome.io/components/esphome.html
+#############################################
+esphome:
+  name: ${devicename}
+  friendly_name: ${friendly_name}
+  comment: ${description_comment} #a ppears on the esphome page in HA
+ 
+
+#############################################
+# ESP Platform and Framework
+# https://esphome.io/components/esp32.html
+#############################################
+esp8266:
+  board: esp01_1m  # The original sonoff basic
+
+#############################################    
+# ESPHome Logging Enable
+# https://esphome.io/components/logger.html
+############################################# 
+logger:
+  level: INFO  #INFO Level suggested, or DEBUG for testing
+  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+#############################################    
+# Enable the Home Assistant API
+# https://esphome.io/components/api.html
+#############################################
+api:
+  encryption:
+    key: ${api_key}
+
+#############################################    
+# Enable Over the Air Update Capability
+# https://esphome.io/components/ota.html?highlight=ota
+#############################################  
+ota:
+  - platform: esphome
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
+
+#############################################    
+# Wifi Settings 
+# https://esphome.io/components/wifi.html
+#
+# Power Save mode (can reduce wifi reliability)
+# NONE (least power saving, Default for ESP8266)
+# LIGHT (Default for ESP32)
+# HIGH (most power saving)
+#############################################  
+wifi:
+  ssid: ${wifi_ssid}
+  password: ${wifi_password}
+  #power_save_mode: LIGHT   # https://esphome.io/components/wifi.html#wifi-power-save-mode
+  manual_ip:               # optional static IP address
+    static_ip: ${static_ip_address}
+    gateway: ${static_ip_gateway}
+    subnet: ${static_ip_subnet}
+  ap:   # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+    ssid: ${devicename} AP
+    password: ${fallback_ap_password}
+    ap_timeout: 30min # Time until it brings up fallback AP. default is 1min
+
+captive_portal:  # extra fallback mechanism for when connecting if the configured WiFi fails
+
+#############################################
+# Real time clock time source for ESPHome
+# If it's invalid, we fall back to an internal clock
+# https://esphome.io/components/time/index.html
+# https://esphome.io/components/time/sntp
+#############################################
+time:
+  - platform: sntp
+    id: sntp_time
+
+#############################################
+# MQTT Monitoring
+# https://esphome.io/components/mqtt.html?highlight=mqtt
+# MUST also have api enabled if you enable MQTT
+#############################################
+mqtt:
+  broker: ${mqtt_server}
+  topic_prefix: ${mqtt_topic}/${devicename}
+  username: ${mqtt_username}
+  password: ${mqtt_password}
+  #discovery: True # enable entity discovery (true is default)
+  #discover_ip: True # enable device discovery (true is default)
+
+#############################################
+# Global Variables for use in automations etc
+# https://esphome.io/guides/automations.html?highlight=globals#global-variables
+#############################################
+#globals:
+
+#############################################
+# Text Sensors
+# https://esphome.io/components/text_sensor/index.html
+#############################################
+text_sensor:
+
+  ######################################################
+  # ESPHome Info
+  ######################################################
+  - platform: version
+    name: ${friendly_name} Version
+  - platform: wifi_info
+    ip_address:
+      name: ${friendly_name} IP Address
+
+#############################################
+# General Sensors 
+# https://esphome.io/components/sensor/index.html
+#############################################
+sensor:
+  - platform: uptime      # Uptime for this device
+    name: ${friendly_name} Uptime
+    update_interval: ${update_interval}  
+  - platform: wifi_signal # Wifi Strength
+    name: ${friendly_name} Wifi Signal
+    update_interval: ${update_interval}  
+
+
+  # for pinout/schematic 
+# https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO16
+      mode: INPUT
+      inverted: True
+    name: "Light Switch 1 (Main)"
+    on_press:
+      - switch.toggle: load1
+  - platform: gpio
+    pin:
+      number: GPIO05
+      mode: INPUT
+      inverted: True
+    name: "Light Switch 2 (Cabinet)"
+    on_press:
+      - switch.toggle: load2
+  - platform: gpio
+    pin:
+      number: GPIO04
+      mode: INPUT
+      inverted: True
+    name: "Extract Fan"
+    on_press:
+      - switch.toggle: load2
+
+switch:
+  - platform: gpio
+    name: "DS Bathroom Top"
+    pin: GPIO13
+    id: load1
+  - platform: gpio
+    name: "DS Bathroom Bottom"
+    pin: GPIO12
+    id: load2
+  - platform: gpio
+    name: "DS Bathroom Bottom"
+    pin: GPIO14
+    id: load2
+
+status_led:
+  pin:
+    number: GPIO2
+    inverted: yes
+
+sensor:
+  - platform: wifi_signal
+    name: "DS Bathroom WiFi signal"
+    update_interval: 60s
+
+  - platform: uptime
+    name: "DS Bathroom uptime"
+
+text_sensor:
+  - platform: version
+    name: "DS Bathroom ESPHome version"

packages/climate_master_bedroom_night_cycle.yaml

@@ -0,0 +1,75 @@
+input_select:
+  heat_pump_temperature_threshold:
+    name: Master Bedroom Night Cycle Temperature Min
+    options:
+      - "18"
+      - "19"
+      - "20"
+      - "21"
+      - "22"
+      - "23"
+    initial: "20"
+    icon: mdi:thermometer
+
+input_boolean:
+  heat_pump_automation:
+    name: Enable Heat Master Bedroom Night Cycling
+    initial: off
+
+automation:
+  - alias: "Master Bedroom Night Cycling"
+    description: "Turns the climate.master_bedroom to 'cool' for 15 minutes every hour if temperature is below the selected threshold."
+    trigger:
+      - platform: time_pattern # Use time_pattern to run the automation on a recurring schedule.
+        minutes: "/30" # The "0" means on the hour or "/15" means every 15 minutes.
+    condition:
+      # Ensure the automation is enabled
+      - condition: state
+        entity_id: input_boolean.heat_pump_automation
+        state: "on"
+      # Check that the current temperature is above the selected threshold
+      - condition: template
+        value_template: >
+          {{ states('sensor.master_bedroom_environment_zth01_temperature_2') | float > states('input_select.heat_pump_temperature_threshold') | float }}
+
+    # Actions: Define the steps of the automation.
+    action:
+      # Action 1: Turn on the heat pump by setting HVAC mode to "cool".
+      - service: climate.set_hvac_mode
+        target:
+          entity_id: climate.master_bedroom
+        data:
+          hvac_mode: cool
+      # Action 2: Keep the heat pump on for x minutes.
+      - delay: "00:10:00"
+      # Action 3: Turn off the heat pump.
+      # Some integrations do not support hvac_mode: off via climate.set_hvac_mode,
+      # so we use the dedicated climate.turn_off service.
+      - service: climate.turn_off
+        target:
+          entity_id: climate.master_bedroom
+
+    mode: single # Ensures only one instance of this automation runs at a time.
+
+  # always switch off the automation at 5am
+  - alias: "Disable Heat Pump Automation at 5AM"
+    description: "Automatically turns off the heat pump automation (input_boolean.heat_pump_automation) at 5 AM."
+    trigger:
+      - platform: time
+        at: "04:59:00"
+    action:
+      - service: input_boolean.turn_off
+        target:
+          entity_id: input_boolean.heat_pump_automation
+    mode: single
+
+  # ensure the heat pump is off at 5am if not already
+  - alias: "Ensure Heat Pump Off at 5 AM"
+    trigger:
+      - platform: time
+        at: "05:00:00"
+    action:
+      - service: climate.turn_off
+        target:
+          entity_id: climate.master_bedroom
+    mode: single