zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

max on time for LED in V1.3

Browse Source
This commit is contained in:
root
2025-08-22 00:30:47 +12:00
parent 77f2af3d74
commit e3d0224364
1 changed files with 3 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
esphome/esp-downstairskitchleds.yaml
View File

@@ -5,7 +5,7 @@
# https://devices.esphome.io/devices/Sinilink-XY-VFMS
# Repo: https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-downstairskitchleds.yaml
#
# v1.3 - 2025-08-22 Added a “max on time” setting (1–48 h, 0 = no limit)
# v1.3 - 2025-08-22 Added a "max on time” setting (1-48 h, 0 = no limit)
# v1.2 - 2025-08-21 Added defaults to “Device Specific Settings” in substitutions & a PWM % view
# v1.1 - 2025-08-18 Full tidy-up as general-purpose LED strip controller
# v1.0 - 2025-08-17 First setup (and replacement of Tasmota)
@@ -21,8 +21,8 @@
# ------------------------------------------
# OPERATION (as of v1.3)
# ------------------------------------------
# 1. General-purpose LED controller.
# 2. Designed for the Sinilink XY-WFMS board with a MOSFET output (claimed ~5 A, 5–36 V DC).
# 1. General-purpose LED controller.
# 2. Designed for the Sinilink XY-WFMS board with a MOSFET output (claimed 5A, 5-36 V DC).
# 3. Global setting for MAX % output to extend LED life.
# 4. Minimum output setting; switches fully OFF at/below the minimum to avoid low-PWM flicker.
# 5. PWM frequency is set to 500 Hz by default. You can increase it, but higher values caused