openhasp mods and file shuffling

Edit esp-astroclockstepper1.yaml
2026-06-22 21:38:18 +12:00 · 2026-06-22 15:29:47 +12:00 · 2026-06-22 15:17:14 +12:00 · 2026-06-22 14:57:04 +12:00 · 2026-06-22 14:57:04 +12:00 · 2026-06-22 14:53:38 +12:00
12 changed files with 2469 additions and 93 deletions
@@ -111,7 +111,8 @@
    "mac_address": "8C:AA:B5:DF:B7:DE"
  },
  "esp-loungepelmetleds2.yaml": {
-    "board_id": "generic-esp8266"
+    "board_id": "generic-esp8266",
+    "mac_address": "48:E7:29:48:A4:F1"
  },
  "esp-entmulti.yaml": {
    "board_id": "generic-esp32",
@@ -161,7 +162,8 @@
    "mac_address": "5C:CF:7F:92:35:96"
  },
  "esp-loungecabinetleds.yaml": {
-    "board_id": "generic-esp8266"
+    "board_id": "generic-esp8266",
+    "mac_address": "E8:DB:84:5C:4D:34"
  },
  "esp-6buttontest-pmb.yaml": {
    "board_id": "generic-esp32"
@@ -174,7 +176,8 @@
    "mac_address": "5C:CF:7F:B4:A7:A5"
  },
  "esp-breakfastbarleds.yaml": {
-    "board_id": "generic-esp8266"
+    "board_id": "generic-esp8266",
+    "mac_address": "24:62:AB:6E:D3:94"
  },
  "esp-laundryenv.yaml": {
    "board_id": "generic-esp8266",
@@ -257,7 +260,8 @@
    "mac_address": "2C:F4:32:4B:BC:70"
  },
  "esp-loungebookshelfleds.yaml": {
-    "board_id": "generic-esp8266"
+    "board_id": "generic-esp8266",
+    "mac_address": "24:62:AB:6E:D5:3C"
  },
  "esp-officeduallights.yaml": {
    "board_id": "generic-esp8266"
@@ -282,7 +286,8 @@
    "board_id": "d1-mini"
  },
  "esp-downstairskitchleds.yaml": {
-    "board_id": "generic-esp8266"
+    "board_id": "generic-esp8266",
+    "mac_address": "E8:DB:84:49:4E:99"
  },
  "esp-entrancelightswitch.yaml": {
    "board_id": "generic-esp8266",
@@ -303,6 +308,56 @@
    "mac_address": "88:13:BF:68:39:2C"
  },
  "_firmware_jobs": [
+    {
+      "job_id": "1a468db814e3",
+      "configuration": "esp-astroclockstepper1.yaml",
+      "job_type": "upload",
+      "status": "completed",
+      "created_at": "2026-06-22T03:29:56.540327+00:00",
+      "started_at": "2026-06-22T03:30:10.489873+00:00",
+      "completed_at": "2026-06-22T03:30:21.965677+00:00",
+      "exit_code": 0,
+      "error": null,
+      "port": "OTA",
+      "new_name": "",
+      "depends_on": "46b32677aa36",
+      "dependency_released": true,
+      "progress": 100,
+      "remote_peer": "",
+      "remote_job_id": "",
+      "remote_peer_label": "",
+      "device_name": "",
+      "device_friendly_name": "",
+      "source": "local",
+      "source_pin_sha256": "",
+      "source_label": "",
+      "source_esphome_version": ""
+    },
+    {
+      "job_id": "46b32677aa36",
+      "configuration": "esp-astroclockstepper1.yaml",
+      "job_type": "compile",
+      "status": "completed",
+      "created_at": "2026-06-22T03:29:56.540282+00:00",
+      "started_at": "2026-06-22T03:29:56.541217+00:00",
+      "completed_at": "2026-06-22T03:30:10.487553+00:00",
+      "exit_code": 0,
+      "error": null,
+      "port": "",
+      "new_name": "",
+      "depends_on": "",
+      "dependency_released": false,
+      "progress": null,
+      "remote_peer": "",
+      "remote_job_id": "",
+      "remote_peer_label": "",
+      "device_name": "",
+      "device_friendly_name": "",
+      "source": "local",
+      "source_pin_sha256": "",
+      "source_label": "",
+      "source_esphome_version": ""
+    },
    {
      "job_id": "dfabed27adf5",
      "configuration": "esp-masterbdrmwest.yaml",
@@ -2982,5 +3037,8 @@
  "_board_id_user_set_migrated": true,
  "_dashboard_identity": {
    "dashboard_id": "vhamVDnWEnx-FvAa24uVv49Wsddurh84"
+  },
+  "esp-astroclockstepper1.yaml": {
+    "mac_address": "24:D7:EB:D0:16:68"
  }
 }
@@ -0,0 +1,865 @@
+#:########################################################################################:#
+# TITLE: ASTRONOMICAL CLOCK STEPPER
+# zorruno.com layout v1.1 2026
+#:########################################################################################:#
+# REPO:
+# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-astroclockstepper.yaml
+#:########################################################################################:#
+# VERSIONS:
+# V1.1 2026-06-22 Added onboard D1 Mini LED flash on each motor step
+# V1.0 2026-06-22 Initial Version
+#:########################################################################################:#
+# HARDWARE:
+# ESP8266 D1 Mini Clone
+# 5V 28BYJ-48 Stepper Motor
+# Keyestudio / ULN2003 style 5V stepper driver board
+#
+# Stepper Driver:
+# - IN1: GPIO14 / D5
+# - IN2: GPIO12 / D6
+# - IN3: GPIO13 / D7
+# - IN4: GPIO15 / D8
+# - VCC: 5V motor supply
+# - GND: Common GND with ESP8266
+#
+# Physical Buttons:
+# - Fast Forward: GPIO5  / D1
+# - Slow Forward: GPIO4  / D2
+# - Fast Reverse: GPIO0  / D3
+# - Slow Reverse: GPIO16 / D0
+#
+# Button board:
+# - Uses built-in 103 pull-up resistors, 10k ohm
+# - Buttons should pull the GPIO pin to GND when pressed
+# - Pull-ups must go to 3.3V, not 5V
+#
+# Onboard Step LED:
+# - GPIO2 / D4
+# - Active-low on most D1 Mini boards
+#:########################################################################################:#
+# OPERATION NOTES:
+# - Normal rotation starts automatically after boot.
+# - Default rotation is one full revolution every 365.2422 days.
+# - Default step count is 4096 steps per full revolution.
+# - Normal movement is extremely slow, about one step every 2.14 hours.
+# - Motor coils are powered only while stepping, then released.
+# - No holding torque is used.
+# - Web template switches mimic held physical buttons.
+# - Manual movement only applies while a physical button or web switch is held/on.
+# - Position counter wraps back to zero after one full rotation.
+# - Onboard D1 Mini LED flashes briefly every time a motor step is issued.
+#:########################################################################################:#
+# OFFLINE NOTES:
+# a) Home Assistant OFFLINE, but Network and MQTT ONLINE
+#    - Device remains controllable via local web portal and MQTT commands
+#    - HA entities unavailable until HA returns
+# b) MQTT OFFLINE, but WiFi/Network and HA API ONLINE
+#    - Device remains controllable from Home Assistant via API
+#    - Local web portal remains available
+# c) Entire WiFi/Network OFFLINE
+#    - No HA API, MQTT, or web control available
+#    - Physical buttons continue to work
+#    - Normal motor timing continues from device uptime
+# d) Device power loss / reboot
+#    - V1 does not restore exact astronomical position after reboot
+#    - Re-align manually using the web or physical button controls
+#:########################################################################################:#
+
+
+#:########################################################################################:#
+# SUBSTITUTIONS: Specific device variable substitutions
+# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
+#:########################################################################################:#
+substitutions:
+  # Device Naming
+  device_name: "esp-astroclockstepper1"
+  friendly_name: "Astronomical Clock Stepper"
+  description_comment: "Astronomical Clock Stepper :: ESP8266 D1 Mini with 28BYJ-48 Stepper Motor (Layout V1.1)"
+  device_area: "Standalone"
+
+  # Project Naming
+  project_name: "zorruno.Astronomical Clock Stepper"
+  project_version: "v1.1"
+
+  # Passwords & Secrets (Unfortunately, you cannot use substitutions inside secret names)
+  api_key: !secret esp-api_key
+  ota_pass: !secret esp-ota_pass
+  static_ip_address: !secret esp-astroclockstepper1_ip
+
+  # If we are changing IP addresses, you must update the current IP address here, otherwise it remains
+  # Don't forget to switch it back when changed.
+  current_ip_address: ${static_ip_address}
+
+  # MQTT Topics
+  mqtt_command_main_topic: !secret mqtt_command_main_topic
+  mqtt_status_main_topic: !secret mqtt_status_main_topic
+  mqtt_device_name: "astro-clock-stepper1"
+  mqtt_command_topic: "${mqtt_command_main_topic}/${mqtt_device_name}"
+  mqtt_status_topic: "${mqtt_status_main_topic}/${mqtt_device_name}"
+
+  # Device Settings
+  log_level: "INFO"
+  sensor_update_interval: "1s"
+  calculated_sensor_update_interval: "60s"
+
+  # Astronomical Clock Settings
+  rotation_days: "365.2422"
+  steps_per_rotation: "4096"
+  normal_direction_name: "Clockwise"
+
+  # Use 1 for normal direction.
+  # Use -1 if the motor rotates the wrong way.
+  normal_direction_multiplier: "1"
+
+  # Manual Movement Speeds
+  manual_fast_rotation_seconds: "30"
+  manual_slow_rotation_seconds: "300"
+
+  # Coil Release
+  coil_release_ms: "500"
+
+  # Step LED
+  onboard_step_led_pin: GPIO2
+  step_led_flash_ms: "25"
+
+  # Stepper Output Pins
+  stepper_in1_pin: GPIO14
+  stepper_in2_pin: GPIO12
+  stepper_in3_pin: GPIO13
+  stepper_in4_pin: GPIO15
+
+  # Physical Button Input Pins
+  button_fast_forward_pin: GPIO5
+  button_slow_forward_pin: GPIO4
+  button_fast_reverse_pin: GPIO0
+  button_slow_reverse_pin: GPIO16
+
+  # Entity Naming
+  web_fast_forward_name: "Web Fast Forward"
+  web_slow_forward_name: "Web Slow Forward"
+  web_fast_reverse_name: "Web Fast Reverse"
+  web_slow_reverse_name: "Web Slow Reverse"
+
+  physical_fast_forward_name: "Physical Fast Forward"
+  physical_slow_forward_name: "Physical Slow Forward"
+  physical_fast_reverse_name: "Physical Fast Reverse"
+  physical_slow_reverse_name: "Physical Slow Reverse"
+
+  zero_position_name: "Zero Position Counter"
+
+
+#:########################################################################################:#
+# PACKAGES: Included Common Packages
+# https://esphome.io/components/packages.html
+#:########################################################################################:#
+packages:
+  #### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
+  common_wifi: !include
+    file: common/network_common.yaml
+    vars:
+      local_device_name: "${device_name}"
+      local_static_ip_address: "${static_ip_address}"
+      local_ota_pass: "${ota_pass}"
+      local_current_ip_address: "${current_ip_address}"
+
+  #### HOME ASSISTANT API (choose encryption or no encryption options) ####
+  common_api: !include
+    file: common/api_common.yaml
+    #file: common/api_common_noencryption.yaml
+    vars:
+      local_api_key: "${api_key}"
+
+  #### MQTT ####
+  common_mqtt: !include
+    file: common/mqtt_common.yaml
+    vars:
+      local_device_name: "${device_name}"
+
+  #### WEB PORTAL ####
+  common_webportal: !include common/webportal_common.yaml
+
+  #### SNTP (Only use if you want/need accurate timeclocks) ####
+  #common_sntp: !include common/sntp_common.yaml
+
+  #### DIAGNOSTICS Sensors ####
+  diag_basic: !include common/include_basic_diag_sensors.yaml
+  diag_more: !include common/include_more_diag_sensors.yaml
+  #diag_debug: !include common/include_debug_diag_sensors.yaml
+  #diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
+
+
+#:########################################################################################:#
+# ESPHOME:
+# https://esphome.io/components/esphome.html
+#:########################################################################################:#
+esphome:
+  name: "${device_name}"
+  friendly_name: "${friendly_name}"
+  comment: "${description_comment}"
+  area: "${device_area}"
+  project:
+    name: "${project_name}"
+    version: "${project_version}"
+
+  on_boot:
+    priority: -100
+    then:
+      - output.turn_off: onboard_step_led
+      - logger.log:
+          level: INFO
+          format: "Astronomical Clock Stepper started. Normal rotation is %s days per full revolution."
+          args:
+            - '"${rotation_days}"'
+
+
+#:########################################################################################:#
+# ESP PLATFORM AND FRAMEWORK:
+# https://esphome.io/components/esp8266.html
+#:########################################################################################:#
+esp8266:
+  board: d1_mini
+  restore_from_flash: true
+
+preferences:
+  flash_write_interval: 5min
+
+mdns:
+  disabled: false
+
+
+#:########################################################################################:#
+# LOGGING:
+# https://esphome.io/components/logger.html
+#:########################################################################################:#
+logger:
+  level: "${log_level}"
+  baud_rate: 0
+
+
+#:########################################################################################:#
+# GLOBALS:
+# Internal position, timing, mode, and held-button state
+# https://esphome.io/components/globals.html
+#:########################################################################################:#
+globals:
+  - id: current_position_step
+    type: int
+    restore_value: no
+    initial_value: "0"
+
+  - id: current_phase_index
+    type: int
+    restore_value: no
+    initial_value: "0"
+
+  - id: last_loop_ms
+    type: uint32_t
+    restore_value: no
+    initial_value: "0"
+
+  - id: last_step_ms
+    type: uint32_t
+    restore_value: no
+    initial_value: "0"
+
+  - id: step_accumulator_ms
+    type: double
+    restore_value: no
+    initial_value: "0.0"
+
+  - id: coils_are_on
+    type: bool
+    restore_value: no
+    initial_value: "false"
+
+  - id: step_led_is_on
+    type: bool
+    restore_value: no
+    initial_value: "false"
+
+  - id: step_led_started_ms
+    type: uint32_t
+    restore_value: no
+    initial_value: "0"
+
+  # 0 = Normal
+  # 1 = Fast Forward
+  # 2 = Slow Forward
+  # 3 = Fast Reverse
+  # 4 = Slow Reverse
+  - id: current_motion_mode
+    type: int
+    restore_value: no
+    initial_value: "0"
+
+  # Physical Button States
+  - id: physical_fast_forward_active
+    type: bool
+    restore_value: no
+    initial_value: "false"
+
+  - id: physical_slow_forward_active
+    type: bool
+    restore_value: no
+    initial_value: "false"
+
+  - id: physical_fast_reverse_active
+    type: bool
+    restore_value: no
+    initial_value: "false"
+
+  - id: physical_slow_reverse_active
+    type: bool
+    restore_value: no
+    initial_value: "false"
+
+  # Web Button States
+  - id: web_fast_forward_active
+    type: bool
+    restore_value: no
+    initial_value: "false"
+
+  - id: web_slow_forward_active
+    type: bool
+    restore_value: no
+    initial_value: "false"
+
+  - id: web_fast_reverse_active
+    type: bool
+    restore_value: no
+    initial_value: "false"
+
+  - id: web_slow_reverse_active
+    type: bool
+    restore_value: no
+    initial_value: "false"
+
+
+#:########################################################################################:#
+# OUTPUT:
+# Stepper driver GPIO outputs and onboard step LED
+# https://esphome.io/components/output/gpio.html
+#:########################################################################################:#
+output:
+  - platform: gpio
+    id: stepper_in1
+    pin: ${stepper_in1_pin}
+
+  - platform: gpio
+    id: stepper_in2
+    pin: ${stepper_in2_pin}
+
+  - platform: gpio
+    id: stepper_in3
+    pin: ${stepper_in3_pin}
+
+  - platform: gpio
+    id: stepper_in4
+    pin: ${stepper_in4_pin}
+
+  # D1 Mini onboard LED is usually GPIO2 / D4 and active-low
+  - platform: gpio
+    id: onboard_step_led
+    pin:
+      number: ${onboard_step_led_pin}
+      inverted: true
+
+
+#:########################################################################################:#
+# SWITCH:
+# Web held-button controls
+# https://esphome.io/components/switch/template.html
+#:########################################################################################:#
+switch:
+  - platform: template
+    name: "${web_fast_forward_name}"
+    id: web_fast_forward_switch
+    icon: mdi:fast-forward
+    optimistic: true
+    restore_mode: ALWAYS_OFF
+    turn_on_action:
+      - switch.turn_off: web_slow_forward_switch
+      - switch.turn_off: web_fast_reverse_switch
+      - switch.turn_off: web_slow_reverse_switch
+      - globals.set:
+          id: web_fast_forward_active
+          value: "true"
+    turn_off_action:
+      - globals.set:
+          id: web_fast_forward_active
+          value: "false"
+
+  - platform: template
+    name: "${web_slow_forward_name}"
+    id: web_slow_forward_switch
+    icon: mdi:play-speed
+    optimistic: true
+    restore_mode: ALWAYS_OFF
+    turn_on_action:
+      - switch.turn_off: web_fast_forward_switch
+      - switch.turn_off: web_fast_reverse_switch
+      - switch.turn_off: web_slow_reverse_switch
+      - globals.set:
+          id: web_slow_forward_active
+          value: "true"
+    turn_off_action:
+      - globals.set:
+          id: web_slow_forward_active
+          value: "false"
+
+  - platform: template
+    name: "${web_fast_reverse_name}"
+    id: web_fast_reverse_switch
+    icon: mdi:rewind
+    optimistic: true
+    restore_mode: ALWAYS_OFF
+    turn_on_action:
+      - switch.turn_off: web_fast_forward_switch
+      - switch.turn_off: web_slow_forward_switch
+      - switch.turn_off: web_slow_reverse_switch
+      - globals.set:
+          id: web_fast_reverse_active
+          value: "true"
+    turn_off_action:
+      - globals.set:
+          id: web_fast_reverse_active
+          value: "false"
+
+  - platform: template
+    name: "${web_slow_reverse_name}"
+    id: web_slow_reverse_switch
+    icon: mdi:rewind-outline
+    optimistic: true
+    restore_mode: ALWAYS_OFF
+    turn_on_action:
+      - switch.turn_off: web_fast_forward_switch
+      - switch.turn_off: web_slow_forward_switch
+      - switch.turn_off: web_fast_reverse_switch
+      - globals.set:
+          id: web_slow_reverse_active
+          value: "true"
+    turn_off_action:
+      - globals.set:
+          id: web_slow_reverse_active
+          value: "false"
+
+
+#:########################################################################################:#
+# BINARY SENSORS:
+# Physical button inputs using external 103 / 10k pull-ups
+# https://esphome.io/components/binary_sensor/gpio.html
+#:########################################################################################:#
+binary_sensor:
+  - platform: gpio
+    name: "${physical_fast_forward_name}"
+    id: physical_fast_forward_button
+    pin:
+      number: ${button_fast_forward_pin}
+      mode: INPUT
+      inverted: true
+    filters:
+      - delayed_on: 20ms
+      - delayed_off: 20ms
+    on_press:
+      - globals.set:
+          id: physical_fast_forward_active
+          value: "true"
+    on_release:
+      - globals.set:
+          id: physical_fast_forward_active
+          value: "false"
+
+  - platform: gpio
+    name: "${physical_slow_forward_name}"
+    id: physical_slow_forward_button
+    pin:
+      number: ${button_slow_forward_pin}
+      mode: INPUT
+      inverted: true
+    filters:
+      - delayed_on: 20ms
+      - delayed_off: 20ms
+    on_press:
+      - globals.set:
+          id: physical_slow_forward_active
+          value: "true"
+    on_release:
+      - globals.set:
+          id: physical_slow_forward_active
+          value: "false"
+
+  - platform: gpio
+    name: "${physical_fast_reverse_name}"
+    id: physical_fast_reverse_button
+    pin:
+      number: ${button_fast_reverse_pin}
+      mode: INPUT
+      inverted: true
+    filters:
+      - delayed_on: 20ms
+      - delayed_off: 20ms
+    on_press:
+      - globals.set:
+          id: physical_fast_reverse_active
+          value: "true"
+    on_release:
+      - globals.set:
+          id: physical_fast_reverse_active
+          value: "false"
+
+  - platform: gpio
+    name: "${physical_slow_reverse_name}"
+    id: physical_slow_reverse_button
+    pin:
+      number: ${button_slow_reverse_pin}
+      mode: INPUT
+      inverted: true
+    filters:
+      - delayed_on: 20ms
+      - delayed_off: 20ms
+    on_press:
+      - globals.set:
+          id: physical_slow_reverse_active
+          value: "true"
+    on_release:
+      - globals.set:
+          id: physical_slow_reverse_active
+          value: "false"
+
+
+#:########################################################################################:#
+# BUTTON:
+# Utility buttons
+# https://esphome.io/components/button/template.html
+#:########################################################################################:#
+button:
+  - platform: template
+    name: "${zero_position_name}"
+    id: zero_position_counter_button
+    icon: mdi:counter
+    on_press:
+      - globals.set:
+          id: current_position_step
+          value: "0"
+      - globals.set:
+          id: current_phase_index
+          value: "0"
+      - globals.set:
+          id: step_accumulator_ms
+          value: "0.0"
+      - logger.log:
+          level: INFO
+          format: "Position counter zeroed."
+
+
+#:########################################################################################:#
+# SENSOR:
+# Position and calculated movement sensors
+# https://esphome.io/components/sensor/template.html
+#:########################################################################################:#
+sensor:
+  - platform: template
+    name: "Position Days"
+    id: position_days_sensor
+    icon: mdi:calendar-clock
+    unit_of_measurement: "days"
+    accuracy_decimals: 4
+    update_interval: "${sensor_update_interval}"
+    lambda: |-
+      return ((double) id(current_position_step) * ${rotation_days}) / ${steps_per_rotation};
+
+  - platform: template
+    name: "Position Step"
+    id: position_step_sensor
+    icon: mdi:counter
+    accuracy_decimals: 0
+    update_interval: "${sensor_update_interval}"
+    lambda: |-
+      return id(current_position_step);
+
+  - platform: template
+    name: "Days Per Step"
+    id: days_per_step_sensor
+    icon: mdi:calendar-arrow-right
+    unit_of_measurement: "days/step"
+    accuracy_decimals: 8
+    update_interval: "${calculated_sensor_update_interval}"
+    lambda: |-
+      return ${rotation_days} / ${steps_per_rotation};
+
+  - platform: template
+    name: "Hours Per Step"
+    id: hours_per_step_sensor
+    icon: mdi:timer-outline
+    unit_of_measurement: "h/step"
+    accuracy_decimals: 8
+    update_interval: "${calculated_sensor_update_interval}"
+    lambda: |-
+      return (${rotation_days} * 24.0) / ${steps_per_rotation};
+
+  - platform: template
+    name: "Normal Step Interval"
+    id: normal_step_interval_sensor
+    icon: mdi:timer-cog-outline
+    unit_of_measurement: "s/step"
+    accuracy_decimals: 4
+    update_interval: "${calculated_sensor_update_interval}"
+    lambda: |-
+      return (${rotation_days} * 24.0 * 60.0 * 60.0) / ${steps_per_rotation};
+
+
+#:########################################################################################:#
+# TEXT SENSOR:
+# Human-readable status sensors
+# https://esphome.io/components/text_sensor/template.html
+#:########################################################################################:#
+text_sensor:
+  - platform: template
+    name: "Motion Mode"
+    id: motion_mode_text_sensor
+    icon: mdi:rotate-3d-variant
+    update_interval: "${sensor_update_interval}"
+    lambda: |-
+      switch (id(current_motion_mode)) {
+        case 1:
+          return {"Fast Forward"};
+        case 2:
+          return {"Slow Forward"};
+        case 3:
+          return {"Fast Reverse"};
+        case 4:
+          return {"Slow Reverse"};
+        case 0:
+        default:
+          return {"Normal"};
+      }
+
+  - platform: template
+    name: "Normal Direction"
+    id: normal_direction_text_sensor
+    icon: mdi:rotate-right
+    update_interval: "${calculated_sensor_update_interval}"
+    lambda: |-
+      return {"${normal_direction_name}"};
+
+
+#:########################################################################################:#
+# INTERVAL:
+# Stepper scheduler
+# https://esphome.io/components/interval.html
+#:########################################################################################:#
+interval:
+  - interval: 5ms
+    then:
+      - lambda: |-
+          const int STEPS_PER_ROTATION = ${steps_per_rotation};
+          const int NORMAL_DIRECTION_MULTIPLIER = ${normal_direction_multiplier};
+
+          const double NORMAL_STEP_INTERVAL_MS =
+            (${rotation_days} * 24.0 * 60.0 * 60.0 * 1000.0) / ${steps_per_rotation};
+
+          const double FAST_STEP_INTERVAL_MS =
+            (${manual_fast_rotation_seconds} * 1000.0) / ${steps_per_rotation};
+
+          const double SLOW_STEP_INTERVAL_MS =
+            (${manual_slow_rotation_seconds} * 1000.0) / ${steps_per_rotation};
+
+          const uint32_t COIL_RELEASE_MS = ${coil_release_ms};
+          const uint32_t STEP_LED_FLASH_MS = ${step_led_flash_ms};
+
+          auto all_coils_off = [&]() {
+            id(stepper_in1).turn_off();
+            id(stepper_in2).turn_off();
+            id(stepper_in3).turn_off();
+            id(stepper_in4).turn_off();
+            id(coils_are_on) = false;
+          };
+
+          auto flash_step_led = [&](uint32_t now_ms) {
+            id(onboard_step_led).turn_on();
+            id(step_led_started_ms) = now_ms;
+            id(step_led_is_on) = true;
+          };
+
+          auto set_coils_for_phase = [&](int phase) {
+            const bool sequence[8][4] = {
+              {true,  false, false, false},
+              {true,  true,  false, false},
+              {false, true,  false, false},
+              {false, true,  true,  false},
+              {false, false, true,  false},
+              {false, false, true,  true },
+              {false, false, false, true },
+              {true,  false, false, true }
+            };
+
+            phase = ((phase % 8) + 8) % 8;
+
+            if (sequence[phase][0]) {
+              id(stepper_in1).turn_on();
+            } else {
+              id(stepper_in1).turn_off();
+            }
+
+            if (sequence[phase][1]) {
+              id(stepper_in2).turn_on();
+            } else {
+              id(stepper_in2).turn_off();
+            }
+
+            if (sequence[phase][2]) {
+              id(stepper_in3).turn_on();
+            } else {
+              id(stepper_in3).turn_off();
+            }
+
+            if (sequence[phase][3]) {
+              id(stepper_in4).turn_on();
+            } else {
+              id(stepper_in4).turn_off();
+            }
+
+            id(coils_are_on) = true;
+          };
+
+          auto do_one_step = [&](int direction, uint32_t now_ms) {
+            if (direction >= 0) {
+              id(current_phase_index) = (id(current_phase_index) + 1) % 8;
+              id(current_position_step) = (id(current_position_step) + 1) % STEPS_PER_ROTATION;
+            } else {
+              id(current_phase_index) = (id(current_phase_index) + 7) % 8;
+              id(current_position_step) = (id(current_position_step) + STEPS_PER_ROTATION - 1) % STEPS_PER_ROTATION;
+            }
+
+            set_coils_for_phase(id(current_phase_index));
+            id(last_step_ms) = now_ms;
+            flash_step_led(now_ms);
+          };
+
+          const bool fast_forward_active =
+            id(physical_fast_forward_active) || id(web_fast_forward_active);
+
+          const bool slow_forward_active =
+            id(physical_slow_forward_active) || id(web_slow_forward_active);
+
+          const bool fast_reverse_active =
+            id(physical_fast_reverse_active) || id(web_fast_reverse_active);
+
+          const bool slow_reverse_active =
+            id(physical_slow_reverse_active) || id(web_slow_reverse_active);
+
+          int selected_mode = 0;
+          int selected_direction = NORMAL_DIRECTION_MULTIPLIER;
+          double selected_step_interval_ms = NORMAL_STEP_INTERVAL_MS;
+
+          if (fast_forward_active) {
+            selected_mode = 1;
+            selected_direction = NORMAL_DIRECTION_MULTIPLIER;
+            selected_step_interval_ms = FAST_STEP_INTERVAL_MS;
+          } else if (slow_forward_active) {
+            selected_mode = 2;
+            selected_direction = NORMAL_DIRECTION_MULTIPLIER;
+            selected_step_interval_ms = SLOW_STEP_INTERVAL_MS;
+          } else if (fast_reverse_active) {
+            selected_mode = 3;
+            selected_direction = -NORMAL_DIRECTION_MULTIPLIER;
+            selected_step_interval_ms = FAST_STEP_INTERVAL_MS;
+          } else if (slow_reverse_active) {
+            selected_mode = 4;
+            selected_direction = -NORMAL_DIRECTION_MULTIPLIER;
+            selected_step_interval_ms = SLOW_STEP_INTERVAL_MS;
+          }
+
+          const uint32_t now_ms = millis();
+
+          if (id(last_loop_ms) == 0) {
+            id(last_loop_ms) = now_ms;
+            id(current_motion_mode) = selected_mode;
+            id(step_accumulator_ms) = 0.0;
+            return;
+          }
+
+          const uint32_t elapsed_ms = now_ms - id(last_loop_ms);
+          id(last_loop_ms) = now_ms;
+
+          if (selected_mode != id(current_motion_mode)) {
+            id(current_motion_mode) = selected_mode;
+            id(step_accumulator_ms) = 0.0;
+          }
+
+          id(step_accumulator_ms) += (double) elapsed_ms;
+
+          if (id(step_accumulator_ms) >= selected_step_interval_ms) {
+            do_one_step(selected_direction, now_ms);
+            id(step_accumulator_ms) -= selected_step_interval_ms;
+
+            // If the loop was badly delayed, avoid trying to catch up with a burst
+            // of very fast steps that the motor may not physically follow.
+            if (id(step_accumulator_ms) > selected_step_interval_ms) {
+              id(step_accumulator_ms) = 0.0;
+            }
+          }
+
+          if (
+            id(coils_are_on) &&
+            selected_mode == 0 &&
+            ((uint32_t) (now_ms - id(last_step_ms)) >= COIL_RELEASE_MS)
+          ) {
+            all_coils_off();
+          }
+
+          if (
+            id(step_led_is_on) &&
+            ((uint32_t) (now_ms - id(step_led_started_ms)) >= STEP_LED_FLASH_MS)
+          ) {
+            id(onboard_step_led).turn_off();
+            id(step_led_is_on) = false;
+          }
+
+
+#:########################################################################################:#
+# MQTT:
+# Device-specific MQTT command triggers, in addition to common MQTT config
+# https://esphome.io/components/mqtt.html
+#:########################################################################################:#
+mqtt:
+  on_message:
+    - topic: "${mqtt_command_topic}/fast_forward/set"
+      payload: "ON"
+      then:
+        - switch.turn_on: web_fast_forward_switch
+
+    - topic: "${mqtt_command_topic}/fast_forward/set"
+      payload: "OFF"
+      then:
+        - switch.turn_off: web_fast_forward_switch
+
+    - topic: "${mqtt_command_topic}/slow_forward/set"
+      payload: "ON"
+      then:
+        - switch.turn_on: web_slow_forward_switch
+
+    - topic: "${mqtt_command_topic}/slow_forward/set"
+      payload: "OFF"
+      then:
+        - switch.turn_off: web_slow_forward_switch
+
+    - topic: "${mqtt_command_topic}/fast_reverse/set"
+      payload: "ON"
+      then:
+        - switch.turn_on: web_fast_reverse_switch
+
+    - topic: "${mqtt_command_topic}/fast_reverse/set"
+      payload: "OFF"
+      then:
+        - switch.turn_off: web_fast_reverse_switch
+
+    - topic: "${mqtt_command_topic}/slow_reverse/set"
+      payload: "ON"
+      then:
+        - switch.turn_on: web_slow_reverse_switch
+
+    - topic: "${mqtt_command_topic}/slow_reverse/set"
+      payload: "OFF"
+      then:
+        - switch.turn_off: web_slow_reverse_switch
@@ -0,0 +1,809 @@
+#:########################################################################################:#
+# Jobs Tracker Job List Package                                                           #
+#:########################################################################################:#
+#
+# TITLE:
+#   Jobs Tracker Job List
+#
+# FILE:
+#   jobs_tracker_jobs.yaml
+#
+# VERSION:
+#   V1.4 2026-06-20
+#
+# PURPOSE:
+#   Defines the job list, MQTT entities, completion triggers and summary output
+#   for the Jobs Tracker system.
+#
+# DEPENDS ON:
+#   jobs_tracker_processor.yaml V1.3.1 or newer
+#
+# MQTT TOPICS:
+#   viewroad-status/jobs_tracker/summary
+#   viewroad-status/jobs_tracker/dog_feeding_morning
+#   viewroad-status/jobs_tracker/dog_feeding_evening
+#   viewroad-status/jobs_tracker/dog_depooping
+#   viewroad-status/jobs_tracker/dishwasher_unpacked
+#   viewroad-status/jobs_tracker/rubbish_removed
+#
+# JOB STATES:
+#   Not Due
+#   Due
+#   Overdue
+#   Complete
+#
+# VERSION HISTORY:
+#   V1.4 2026-06-20
+#     - Updated shared dog-fed button behaviour.
+#     - If either dog-feeding job is Due or Overdue, the shared physical button
+#       completes every dog-feeding job that is currently Due or Overdue.
+#     - If neither dog-feeding job is Due or Overdue, the shared physical button
+#       falls back to time-based early completion.
+#
+#   V1.3 2026-06-20
+#     - Added Not Due support for daily jobs before configured due time.
+#     - Added grouped MQTT Jobs Tracker device.
+#
+# NOTES:
+#   - due_weekday uses Python numbering:
+#       Monday=0, Tuesday=1, Wednesday=2, Thursday=3,
+#       Friday=4, Saturday=5, Sunday=6
+#
+#   - event.dog_fed_button_xbt14_action is shared by:
+#       Dog Feeding Morning
+#       Dog Feeding Evening
+#
+#   - sensor.jobs_done marks both:
+#       Dishwasher Unpacked
+#       Rubbish Removed
+#
+#:########################################################################################:#
+
+#:########################################################################################:#
+# MANUAL TEST BUTTONS                                                                      #
+#:########################################################################################:#
+
+input_button:
+  jobs_tracker_complete_dog_feeding_morning:
+    name: "Jobs Tracker Complete Dog Feeding Morning"
+    icon: mdi:dog-side
+
+  jobs_tracker_complete_dog_feeding_evening:
+    name: "Jobs Tracker Complete Dog Feeding Evening"
+    icon: mdi:dog-side
+
+  jobs_tracker_complete_dog_depooping:
+    name: "Jobs Tracker Complete Dog Depooping"
+    icon: mdi:emoticon-poop
+
+  jobs_tracker_complete_dishwasher_unpacked:
+    name: "Jobs Tracker Complete Dishwasher Unpacked"
+    icon: mdi:dishwasher
+
+  jobs_tracker_complete_rubbish_removed:
+    name: "Jobs Tracker Complete Rubbish Removed"
+    icon: mdi:trash-can
+
+#:########################################################################################:#
+# MQTT SENSORS                                                                             #
+#:########################################################################################:#
+
+mqtt:
+  sensor:
+    #:####################################################################################:#
+    # Summary sensor                                                                       #
+    #:####################################################################################:#
+
+    - name: "Jobs Tracker - Summary"
+      unique_id: jobs_tracker_summary
+      state_topic: "viewroad-status/jobs_tracker/summary"
+      value_template: "{{ value_json.state | default('unknown') }}"
+      json_attributes_topic: "viewroad-status/jobs_tracker/summary"
+      icon: mdi:clipboard-list
+      device:
+        identifiers:
+          - viewroad_jobs_tracker
+        name: "Jobs Tracker"
+        manufacturer: "View Road Home Assistant"
+        model: "Shared household jobs tracker"
+        sw_version: "1.4"
+
+    #:####################################################################################:#
+    # Individual job sensors                                                               #
+    #:####################################################################################:#
+
+    - name: "Jobs Tracker - Dog Feeding Morning"
+      unique_id: jobs_tracker_dog_feeding_morning
+      state_topic: "viewroad-status/jobs_tracker/dog_feeding_morning"
+      value_template: "{{ value_json.state | default('unknown') }}"
+      json_attributes_topic: "viewroad-status/jobs_tracker/dog_feeding_morning"
+      icon: mdi:dog-side
+      device:
+        identifiers:
+          - viewroad_jobs_tracker
+        name: "Jobs Tracker"
+        manufacturer: "View Road Home Assistant"
+        model: "Shared household jobs tracker"
+        sw_version: "1.4"
+
+    - name: "Jobs Tracker - Dog Feeding Evening"
+      unique_id: jobs_tracker_dog_feeding_evening
+      state_topic: "viewroad-status/jobs_tracker/dog_feeding_evening"
+      value_template: "{{ value_json.state | default('unknown') }}"
+      json_attributes_topic: "viewroad-status/jobs_tracker/dog_feeding_evening"
+      icon: mdi:dog-side
+      device:
+        identifiers:
+          - viewroad_jobs_tracker
+        name: "Jobs Tracker"
+        manufacturer: "View Road Home Assistant"
+        model: "Shared household jobs tracker"
+        sw_version: "1.4"
+
+    - name: "Jobs Tracker - Dog Depooping"
+      unique_id: jobs_tracker_dog_depooping
+      state_topic: "viewroad-status/jobs_tracker/dog_depooping"
+      value_template: "{{ value_json.state | default('unknown') }}"
+      json_attributes_topic: "viewroad-status/jobs_tracker/dog_depooping"
+      icon: mdi:emoticon-poop
+      device:
+        identifiers:
+          - viewroad_jobs_tracker
+        name: "Jobs Tracker"
+        manufacturer: "View Road Home Assistant"
+        model: "Shared household jobs tracker"
+        sw_version: "1.4"
+
+    - name: "Jobs Tracker - Dishwasher Unpacked"
+      unique_id: jobs_tracker_dishwasher_unpacked
+      state_topic: "viewroad-status/jobs_tracker/dishwasher_unpacked"
+      value_template: "{{ value_json.state | default('unknown') }}"
+      json_attributes_topic: "viewroad-status/jobs_tracker/dishwasher_unpacked"
+      icon: mdi:dishwasher
+      device:
+        identifiers:
+          - viewroad_jobs_tracker
+        name: "Jobs Tracker"
+        manufacturer: "View Road Home Assistant"
+        model: "Shared household jobs tracker"
+        sw_version: "1.4"
+
+    - name: "Jobs Tracker - Rubbish Removed"
+      unique_id: jobs_tracker_rubbish_removed
+      state_topic: "viewroad-status/jobs_tracker/rubbish_removed"
+      value_template: "{{ value_json.state | default('unknown') }}"
+      json_attributes_topic: "viewroad-status/jobs_tracker/rubbish_removed"
+      icon: mdi:trash-can
+      device:
+        identifiers:
+          - viewroad_jobs_tracker
+        name: "Jobs Tracker"
+        manufacturer: "View Road Home Assistant"
+        model: "Shared household jobs tracker"
+        sw_version: "1.4"
+
+#:########################################################################################:#
+# TEMPLATE SENSORS                                                                         #
+#:########################################################################################:#
+
+template:
+  - binary_sensor:
+      - name: "Job Complete - Dog Feeding Morning"
+        unique_id: job_complete_dog_feeding_morning
+        icon: mdi:dog-side
+        state: "{{ is_state('sensor.jobs_tracker_dog_feeding_morning', 'Complete') }}"
+
+      - name: "Job Complete - Dog Feeding Evening"
+        unique_id: job_complete_dog_feeding_evening
+        icon: mdi:dog-side
+        state: "{{ is_state('sensor.jobs_tracker_dog_feeding_evening', 'Complete') }}"
+
+      - name: "Job Complete - Dog Depooping"
+        unique_id: job_complete_dog_depooping
+        icon: mdi:emoticon-poop
+        state: "{{ is_state('sensor.jobs_tracker_dog_depooping', 'Complete') }}"
+
+      - name: "Job Complete - Dishwasher Unpacked"
+        unique_id: job_complete_dishwasher_unpacked
+        icon: mdi:dishwasher
+        state: "{{ is_state('sensor.jobs_tracker_dishwasher_unpacked', 'Complete') }}"
+
+      - name: "Job Complete - Rubbish Removed"
+        unique_id: job_complete_rubbish_removed
+        icon: mdi:trash-can
+        state: "{{ is_state('sensor.jobs_tracker_rubbish_removed', 'Complete') }}"
+
+  - sensor:
+      - name: "Jobs Tracker - Complete Count"
+        unique_id: jobs_tracker_complete_count
+        icon: mdi:clipboard-check
+        state: >-
+          {{
+            [
+              states('sensor.jobs_tracker_dog_feeding_morning'),
+              states('sensor.jobs_tracker_dog_feeding_evening'),
+              states('sensor.jobs_tracker_dog_depooping'),
+              states('sensor.jobs_tracker_dishwasher_unpacked'),
+              states('sensor.jobs_tracker_rubbish_removed')
+            ] | select('eq', 'Complete') | list | count
+          }}
+
+      - name: "Jobs Tracker - Not Due Count"
+        unique_id: jobs_tracker_not_due_count
+        icon: mdi:clipboard-clock-outline
+        state: >-
+          {{
+            [
+              states('sensor.jobs_tracker_dog_feeding_morning'),
+              states('sensor.jobs_tracker_dog_feeding_evening'),
+              states('sensor.jobs_tracker_dog_depooping'),
+              states('sensor.jobs_tracker_dishwasher_unpacked'),
+              states('sensor.jobs_tracker_rubbish_removed')
+            ] | select('eq', 'Not Due') | list | count
+          }}
+
+      - name: "Jobs Tracker - Due Count"
+        unique_id: jobs_tracker_due_count
+        icon: mdi:clipboard-alert
+        state: >-
+          {{
+            [
+              states('sensor.jobs_tracker_dog_feeding_morning'),
+              states('sensor.jobs_tracker_dog_feeding_evening'),
+              states('sensor.jobs_tracker_dog_depooping'),
+              states('sensor.jobs_tracker_dishwasher_unpacked'),
+              states('sensor.jobs_tracker_rubbish_removed')
+            ] | select('eq', 'Due') | list | count
+          }}
+
+      - name: "Jobs Tracker - Overdue Count"
+        unique_id: jobs_tracker_overdue_count
+        icon: mdi:clipboard-alert-outline
+        state: >-
+          {{
+            [
+              states('sensor.jobs_tracker_dog_feeding_morning'),
+              states('sensor.jobs_tracker_dog_feeding_evening'),
+              states('sensor.jobs_tracker_dog_depooping'),
+              states('sensor.jobs_tracker_dishwasher_unpacked'),
+              states('sensor.jobs_tracker_rubbish_removed')
+            ] | select('eq', 'Overdue') | list | count
+          }}
+
+#:########################################################################################:#
+# SCRIPTS                                                                                  #
+#:########################################################################################:#
+
+script:
+  jobs_tracker_dispatch:
+    alias: "Jobs Tracker - Dispatch"
+    description: "Runs the generic processor against either all jobs or one completed job."
+    mode: queued
+    max: 20
+
+    fields:
+      update_all:
+        description: "True to refresh all jobs."
+        example: true
+
+      job_id:
+        description: "Job ID to mark complete."
+        example: "dog_feeding_morning"
+
+    sequence:
+      - variables:
+          jobs_tracker_jobs:
+            - job_id: dog_feeding_morning
+              job_name: "Dog Feeding Morning"
+              repeat_type: daily
+              due_time: "06:00"
+              due_weekday: 0
+              due_day: 1
+              mqtt_topic: "viewroad-status/jobs_tracker/dog_feeding_morning"
+              state_entity: "sensor.jobs_tracker_dog_feeding_morning"
+
+            - job_id: dog_feeding_evening
+              job_name: "Dog Feeding Evening"
+              repeat_type: daily
+              due_time: "17:00"
+              due_weekday: 0
+              due_day: 1
+              mqtt_topic: "viewroad-status/jobs_tracker/dog_feeding_evening"
+              state_entity: "sensor.jobs_tracker_dog_feeding_evening"
+
+            - job_id: dog_depooping
+              job_name: "Dog De-pooping"
+              repeat_type: weekly
+              due_time: "08:00"
+              due_weekday: 4
+              due_day: 1
+              mqtt_topic: "viewroad-status/jobs_tracker/dog_depooping"
+              state_entity: "sensor.jobs_tracker_dog_depooping"
+
+            - job_id: dishwasher_unpacked
+              job_name: "Dishwasher Unpacked"
+              repeat_type: daily
+              due_time: "15:30"
+              due_weekday: 0
+              due_day: 1
+              mqtt_topic: "viewroad-status/jobs_tracker/dishwasher_unpacked"
+              state_entity: "sensor.jobs_tracker_dishwasher_unpacked"
+
+            - job_id: rubbish_removed
+              job_name: "Rubbish Removed"
+              repeat_type: daily
+              due_time: "15:30"
+              due_weekday: 0
+              due_day: 1
+              mqtt_topic: "viewroad-status/jobs_tracker/rubbish_removed"
+              state_entity: "sensor.jobs_tracker_rubbish_removed"
+
+      - choose:
+          #:################################################################################:#
+          # Refresh all jobs                                                                 #
+          #:################################################################################:#
+
+          - conditions:
+              - condition: template
+                value_template: "{{ update_all | default(false) | bool }}"
+            sequence:
+              - repeat:
+                  for_each: "{{ jobs_tracker_jobs }}"
+                  sequence:
+                    - action: script.jobs_tracker_update_job
+                      data:
+                        job_id: "{{ repeat.item.job_id }}"
+                        job_name: "{{ repeat.item.job_name }}"
+                        repeat_type: "{{ repeat.item.repeat_type }}"
+                        due_time: "{{ repeat.item.due_time }}"
+                        due_weekday: "{{ repeat.item.due_weekday }}"
+                        due_day: "{{ repeat.item.due_day }}"
+                        mqtt_topic: "{{ repeat.item.mqtt_topic }}"
+                        state_entity: "{{ repeat.item.state_entity }}"
+                        mark_complete: false
+
+        #:##################################################################################:#
+        # Mark one job complete                                                              #
+        #:##################################################################################:#
+
+        default:
+          - repeat:
+              for_each: "{{ jobs_tracker_jobs }}"
+              sequence:
+                - if:
+                    - condition: template
+                      value_template: "{{ repeat.item.job_id == job_id }}"
+                  then:
+                    - action: script.jobs_tracker_update_job
+                      data:
+                        job_id: "{{ repeat.item.job_id }}"
+                        job_name: "{{ repeat.item.job_name }}"
+                        repeat_type: "{{ repeat.item.repeat_type }}"
+                        due_time: "{{ repeat.item.due_time }}"
+                        due_weekday: "{{ repeat.item.due_weekday }}"
+                        due_day: "{{ repeat.item.due_day }}"
+                        mqtt_topic: "{{ repeat.item.mqtt_topic }}"
+                        state_entity: "{{ repeat.item.state_entity }}"
+                        mark_complete: true
+
+      # Give the MQTT sensors a moment to update from the retained job payloads
+      # before building the summary payload.
+      - delay: "00:00:01"
+
+      - action: script.jobs_tracker_publish_summary
+
+  jobs_tracker_publish_summary:
+    alias: "Jobs Tracker - Publish Summary"
+    description: "Publishes retained MQTT JSON summary for all tracked jobs."
+    mode: queued
+    max: 5
+
+    sequence:
+      - variables:
+          complete_count: >-
+            {{
+              [
+                states('sensor.jobs_tracker_dog_feeding_morning'),
+                states('sensor.jobs_tracker_dog_feeding_evening'),
+                states('sensor.jobs_tracker_dog_depooping'),
+                states('sensor.jobs_tracker_dishwasher_unpacked'),
+                states('sensor.jobs_tracker_rubbish_removed')
+              ] | select('eq', 'Complete') | list | count
+            }}
+
+          not_due_count: >-
+            {{
+              [
+                states('sensor.jobs_tracker_dog_feeding_morning'),
+                states('sensor.jobs_tracker_dog_feeding_evening'),
+                states('sensor.jobs_tracker_dog_depooping'),
+                states('sensor.jobs_tracker_dishwasher_unpacked'),
+                states('sensor.jobs_tracker_rubbish_removed')
+              ] | select('eq', 'Not Due') | list | count
+            }}
+
+          due_count: >-
+            {{
+              [
+                states('sensor.jobs_tracker_dog_feeding_morning'),
+                states('sensor.jobs_tracker_dog_feeding_evening'),
+                states('sensor.jobs_tracker_dog_depooping'),
+                states('sensor.jobs_tracker_dishwasher_unpacked'),
+                states('sensor.jobs_tracker_rubbish_removed')
+              ] | select('eq', 'Due') | list | count
+            }}
+
+          overdue_count: >-
+            {{
+              [
+                states('sensor.jobs_tracker_dog_feeding_morning'),
+                states('sensor.jobs_tracker_dog_feeding_evening'),
+                states('sensor.jobs_tracker_dog_depooping'),
+                states('sensor.jobs_tracker_dishwasher_unpacked'),
+                states('sensor.jobs_tracker_rubbish_removed')
+              ] | select('eq', 'Overdue') | list | count
+            }}
+
+          unknown_count: >-
+            {{
+              [
+                states('sensor.jobs_tracker_dog_feeding_morning'),
+                states('sensor.jobs_tracker_dog_feeding_evening'),
+                states('sensor.jobs_tracker_dog_depooping'),
+                states('sensor.jobs_tracker_dishwasher_unpacked'),
+                states('sensor.jobs_tracker_rubbish_removed')
+              ]
+              | reject('in', ['Complete', 'Not Due', 'Due', 'Overdue'])
+              | list
+              | count
+            }}
+
+          summary_state: >-
+            {% if overdue_count | int(0) > 0 and due_count | int(0) > 0 %}
+              {{ overdue_count }} Overdue, {{ due_count }} Due
+            {% elif overdue_count | int(0) > 0 %}
+              {{ overdue_count }} Overdue
+            {% elif due_count | int(0) > 0 %}
+              {{ due_count }} Due
+            {% elif not_due_count | int(0) > 0 and complete_count | int(0) > 0 %}
+              {{ complete_count }} Complete, {{ not_due_count }} Not Due
+            {% elif not_due_count | int(0) > 0 %}
+              {{ not_due_count }} Not Due
+            {% elif complete_count | int(0) == 5 %}
+              All Complete
+            {% elif unknown_count | int(0) > 0 %}
+              {{ unknown_count }} Unknown
+            {% else %}
+              Unknown
+            {% endif %}
+
+      - action: mqtt.publish
+        data:
+          topic: "viewroad-status/jobs_tracker/summary"
+          retain: true
+          qos: 1
+          payload: >-
+            {{
+              {
+                "state": summary_state | trim,
+                "complete_count": complete_count | int(0),
+                "not_due_count": not_due_count | int(0),
+                "due_count": due_count | int(0),
+                "overdue_count": overdue_count | int(0),
+                "unknown_count": unknown_count | int(0),
+                "total_count": 5,
+                "jobs": [
+                  {
+                    "job_id": "dog_feeding_morning",
+                    "job_name": "Dog Feeding Morning",
+                    "state": states('sensor.jobs_tracker_dog_feeding_morning'),
+                    "next_due_human": state_attr('sensor.jobs_tracker_dog_feeding_morning', 'next_due_human'),
+                    "last_completed_human": state_attr('sensor.jobs_tracker_dog_feeding_morning', 'last_completed_human'),
+                    "minutes_since_required": state_attr('sensor.jobs_tracker_dog_feeding_morning', 'minutes_since_required'),
+                    "hours_since_required": state_attr('sensor.jobs_tracker_dog_feeding_morning', 'hours_since_required'),
+                    "hours_since_completed": state_attr('sensor.jobs_tracker_dog_feeding_morning', 'hours_since_completed')
+                  },
+                  {
+                    "job_id": "dog_feeding_evening",
+                    "job_name": "Dog Feeding Evening",
+                    "state": states('sensor.jobs_tracker_dog_feeding_evening'),
+                    "next_due_human": state_attr('sensor.jobs_tracker_dog_feeding_evening', 'next_due_human'),
+                    "last_completed_human": state_attr('sensor.jobs_tracker_dog_feeding_evening', 'last_completed_human'),
+                    "minutes_since_required": state_attr('sensor.jobs_tracker_dog_feeding_evening', 'minutes_since_required'),
+                    "hours_since_required": state_attr('sensor.jobs_tracker_dog_feeding_evening', 'hours_since_required'),
+                    "hours_since_completed": state_attr('sensor.jobs_tracker_dog_feeding_evening', 'hours_since_completed')
+                  },
+                  {
+                    "job_id": "dog_depooping",
+                    "job_name": "Dog De-pooping",
+                    "state": states('sensor.jobs_tracker_dog_depooping'),
+                    "next_due_human": state_attr('sensor.jobs_tracker_dog_depooping', 'next_due_human'),
+                    "last_completed_human": state_attr('sensor.jobs_tracker_dog_depooping', 'last_completed_human'),
+                    "minutes_since_required": state_attr('sensor.jobs_tracker_dog_depooping', 'minutes_since_required'),
+                    "hours_since_required": state_attr('sensor.jobs_tracker_dog_depooping', 'hours_since_required'),
+                    "hours_since_completed": state_attr('sensor.jobs_tracker_dog_depooping', 'hours_since_completed')
+                  },
+                  {
+                    "job_id": "dishwasher_unpacked",
+                    "job_name": "Dishwasher Unpacked",
+                    "state": states('sensor.jobs_tracker_dishwasher_unpacked'),
+                    "next_due_human": state_attr('sensor.jobs_tracker_dishwasher_unpacked', 'next_due_human'),
+                    "last_completed_human": state_attr('sensor.jobs_tracker_dishwasher_unpacked', 'last_completed_human'),
+                    "minutes_since_required": state_attr('sensor.jobs_tracker_dishwasher_unpacked', 'minutes_since_required'),
+                    "hours_since_required": state_attr('sensor.jobs_tracker_dishwasher_unpacked', 'hours_since_required'),
+                    "hours_since_completed": state_attr('sensor.jobs_tracker_dishwasher_unpacked', 'hours_since_completed')
+                  },
+                  {
+                    "job_id": "rubbish_removed",
+                    "job_name": "Rubbish Removed",
+                    "state": states('sensor.jobs_tracker_rubbish_removed'),
+                    "next_due_human": state_attr('sensor.jobs_tracker_rubbish_removed', 'next_due_human'),
+                    "last_completed_human": state_attr('sensor.jobs_tracker_rubbish_removed', 'last_completed_human'),
+                    "minutes_since_required": state_attr('sensor.jobs_tracker_rubbish_removed', 'minutes_since_required'),
+                    "hours_since_required": state_attr('sensor.jobs_tracker_rubbish_removed', 'hours_since_required'),
+                    "hours_since_completed": state_attr('sensor.jobs_tracker_rubbish_removed', 'hours_since_completed')
+                  }
+                ],
+                "dog_feeding_morning": states('sensor.jobs_tracker_dog_feeding_morning'),
+                "dog_feeding_evening": states('sensor.jobs_tracker_dog_feeding_evening'),
+                "dog_depooping": states('sensor.jobs_tracker_dog_depooping'),
+                "dishwasher_unpacked": states('sensor.jobs_tracker_dishwasher_unpacked'),
+                "rubbish_removed": states('sensor.jobs_tracker_rubbish_removed'),
+                "last_updated_local": now().strftime('%Y-%m-%d %H:%M:%S')
+              } | tojson
+            }}
+
+#:########################################################################################:#
+# AUTOMATIONS                                                                              #
+#:########################################################################################:#
+
+automation:
+  - id: jobs_tracker_refresh_all_jobs
+    alias: "Jobs Tracker - Refresh All Jobs"
+    description: "Refreshes derived due/overdue values for every job."
+    mode: single
+
+    triggers:
+      - trigger: homeassistant
+        event: start
+        id: ha_start
+
+      - trigger: time_pattern
+        minutes: "/1"
+        id: tick
+
+    actions:
+      # Let retained MQTT job messages restore before the first refresh.
+      - if:
+          - condition: template
+            value_template: "{{ trigger.id == 'ha_start' }}"
+        then:
+          - delay: "00:01:00"
+
+      - action: script.jobs_tracker_dispatch
+        data:
+          update_all: true
+
+  - id: jobs_tracker_completion_actions
+    alias: "Jobs Tracker - Completion Actions"
+    description: "Marks jobs complete when physical/action/manual buttons are pressed."
+    mode: queued
+    max: 20
+
+    triggers:
+      #:####################################################################################:#
+      # Physical / action entities                                                          #
+      #:####################################################################################:#
+
+      - trigger: state
+        entity_id: event.dog_fed_button_xbt14_action
+        id: dog_fed_button
+
+      - trigger: state
+        entity_id: event.dog_depooped_button_xbt15_action
+        id: dog_depooped_button
+
+      - trigger: state
+        entity_id: sensor.jobs_done
+        id: jobs_done_sensor
+
+      #:####################################################################################:#
+      # Manual test buttons                                                                 #
+      #:####################################################################################:#
+
+      - trigger: state
+        entity_id: input_button.jobs_tracker_complete_dog_feeding_morning
+        id: manual_dog_feeding_morning
+
+      - trigger: state
+        entity_id: input_button.jobs_tracker_complete_dog_feeding_evening
+        id: manual_dog_feeding_evening
+
+      - trigger: state
+        entity_id: input_button.jobs_tracker_complete_dog_depooping
+        id: manual_dog_depooping
+
+      - trigger: state
+        entity_id: input_button.jobs_tracker_complete_dishwasher_unpacked
+        id: manual_dishwasher_unpacked
+
+      - trigger: state
+        entity_id: input_button.jobs_tracker_complete_rubbish_removed
+        id: manual_rubbish_removed
+
+    conditions:
+      - condition: template
+        value_template: >-
+          {{
+            trigger.to_state is not none
+            and trigger.to_state.state not in ['unknown', 'unavailable']
+          }}
+
+    actions:
+      - choose:
+          #:################################################################################:#
+          # Dog fed physical button                                                         #
+          #:################################################################################:#
+          #
+          # Shared button behaviour:
+          #
+          #   If any dog feeding jobs are already Due or Overdue:
+          #     - Complete every linked dog-feeding job that is currently Due or Overdue.
+          #
+          #   If no dog feeding jobs are currently Due or Overdue:
+          #     - Fall back to time-based behaviour so early completion still works.
+          #
+          # Examples:
+          #
+          #   07:00, morning Due, evening Not Due:
+          #     - Completes morning only.
+          #
+          #   23:30, morning Overdue, evening Overdue:
+          #     - Completes morning and evening.
+          #
+          #   16:30, morning Complete, evening Not Due:
+          #     - Completes evening early.
+          #
+          #:################################################################################:#
+
+          - conditions:
+              - condition: template
+                value_template: "{{ trigger.id == 'dog_fed_button' }}"
+            sequence:
+              - variables:
+                  dog_feeding_morning_state: "{{ states('sensor.jobs_tracker_dog_feeding_morning') }}"
+                  dog_feeding_evening_state: "{{ states('sensor.jobs_tracker_dog_feeding_evening') }}"
+
+                  dog_feeding_any_due_or_overdue: >-
+                    {{
+                      dog_feeding_morning_state in ['Due', 'Overdue']
+                      or dog_feeding_evening_state in ['Due', 'Overdue']
+                    }}
+
+              #:############################################################################:#
+              # Complete all linked dog feeding jobs that are already Due or Overdue         #
+              #:############################################################################:#
+
+              - if:
+                  - condition: template
+                    value_template: "{{ dog_feeding_morning_state in ['Due', 'Overdue'] }}"
+                then:
+                  - action: script.jobs_tracker_dispatch
+                    data:
+                      job_id: dog_feeding_morning
+
+              - if:
+                  - condition: template
+                    value_template: "{{ dog_feeding_evening_state in ['Due', 'Overdue'] }}"
+                then:
+                  - action: script.jobs_tracker_dispatch
+                    data:
+                      job_id: dog_feeding_evening
+
+              #:############################################################################:#
+              # Fallback for early completion                                                #
+              #:############################################################################:#
+              #
+              # Only used when neither dog feeding job is currently Due or Overdue.
+              # This keeps useful behaviour such as feeding early before the due time.
+              # It will not overwrite an already Complete job.
+
+              - if:
+                  - condition: template
+                    value_template: >-
+                      {{
+                        not (dog_feeding_any_due_or_overdue | bool)
+                        and now().hour < 12
+                        and dog_feeding_morning_state != 'Complete'
+                      }}
+                then:
+                  - action: script.jobs_tracker_dispatch
+                    data:
+                      job_id: dog_feeding_morning
+
+              - if:
+                  - condition: template
+                    value_template: >-
+                      {{
+                        not (dog_feeding_any_due_or_overdue | bool)
+                        and now().hour >= 12
+                        and dog_feeding_evening_state != 'Complete'
+                      }}
+                then:
+                  - action: script.jobs_tracker_dispatch
+                    data:
+                      job_id: dog_feeding_evening
+
+          #:################################################################################:#
+          # Dog de-pooped physical button                                                    #
+          #:################################################################################:#
+
+          - conditions:
+              - condition: template
+                value_template: "{{ trigger.id == 'dog_depooped_button' }}"
+            sequence:
+              - action: script.jobs_tracker_dispatch
+                data:
+                  job_id: dog_depooping
+
+          #:################################################################################:#
+          # Shared jobs_done sensor                                                          #
+          #:################################################################################:#
+          #
+          # One state change marks both jobs complete.
+
+          - conditions:
+              - condition: template
+                value_template: "{{ trigger.id == 'jobs_done_sensor' }}"
+            sequence:
+              - action: script.jobs_tracker_dispatch
+                data:
+                  job_id: dishwasher_unpacked
+
+              - action: script.jobs_tracker_dispatch
+                data:
+                  job_id: rubbish_removed
+
+          #:################################################################################:#
+          # Manual test buttons                                                              #
+          #:################################################################################:#
+
+          - conditions:
+              - condition: template
+                value_template: "{{ trigger.id == 'manual_dog_feeding_morning' }}"
+            sequence:
+              - action: script.jobs_tracker_dispatch
+                data:
+                  job_id: dog_feeding_morning
+
+          - conditions:
+              - condition: template
+                value_template: "{{ trigger.id == 'manual_dog_feeding_evening' }}"
+            sequence:
+              - action: script.jobs_tracker_dispatch
+                data:
+                  job_id: dog_feeding_evening
+
+          - conditions:
+              - condition: template
+                value_template: "{{ trigger.id == 'manual_dog_depooping' }}"
+            sequence:
+              - action: script.jobs_tracker_dispatch
+                data:
+                  job_id: dog_depooping
+
+          - conditions:
+              - condition: template
+                value_template: "{{ trigger.id == 'manual_dishwasher_unpacked' }}"
+            sequence:
+              - action: script.jobs_tracker_dispatch
+                data:
+                  job_id: dishwasher_unpacked
+
+          - conditions:
+              - condition: template
+                value_template: "{{ trigger.id == 'manual_rubbish_removed' }}"
+            sequence:
+              - action: script.jobs_tracker_dispatch
+                data:
+                  job_id: rubbish_removed
@@ -0,0 +1,316 @@
+################################################################################
+# Jobs Tracker Processor Package
+################################################################################
+#
+# TITLE:
+#   Jobs Tracker Processor
+#
+# FILE:
+#   jobs_tracker_processor.yaml
+#
+# VERSION:
+#   V1.3.1 2026-06-20
+#
+# CHANGELOG:
+#   V1.3.1:
+#     - Corrected script field definitions so Home Assistant reliably creates
+#       script.jobs_tracker_update_job.
+#
+#   V1.3:
+#     - Daily jobs reset at 00:00 but do not become Due until their configured
+#       due time.
+#     - Added "Not Due" state.
+#     - Completion is recalculated from retained last_completed_ts after restart.
+#
+################################################################################
+
+script:
+  jobs_tracker_update_job:
+    alias: "Jobs Tracker - Update Job"
+    description: "Updates one job's retained MQTT JSON state."
+    mode: queued
+    max: 20
+
+    fields:
+      job_id:
+        description: "Machine-safe job ID."
+        example: "dog_feeding_morning"
+      job_name:
+        description: "Human-readable job name."
+        example: "Dog Feeding Morning"
+      repeat_type:
+        description: "daily, weekly or monthly."
+        example: "daily"
+      due_time:
+        description: "Time the job is due, HH:MM."
+        example: "06:00"
+      due_weekday:
+        description: "For weekly jobs only. Monday=0, Friday=4, Sunday=6."
+        example: 4
+      due_day:
+        description: "For monthly jobs only. Use 1-28."
+        example: 1
+      mqtt_topic:
+        description: "MQTT topic used for retained job state."
+        example: "viewroad-status/jobs_tracker/dog_feeding_morning"
+      state_entity:
+        description: "MQTT sensor entity that reads this job's retained JSON."
+        example: "sensor.jobs_tracker_dog_feeding_morning"
+      mark_complete:
+        description: "Set true when a human has completed the job."
+        example: true
+
+    sequence:
+      - variables:
+          mark_complete_bool: "{{ mark_complete | default(false) | bool }}"
+          repeat_type_safe: "{{ repeat_type | default('daily') | lower }}"
+          due_time_safe: "{{ due_time | default('00:00') }}"
+          due_hour: "{{ due_time_safe.split(':')[0] | int(0) }}"
+          due_minute: "{{ due_time_safe.split(':')[1] | int(0) }}"
+          due_seconds: "{{ ((due_hour | int) * 3600) + ((due_minute | int) * 60) }}"
+          due_weekday_safe: "{{ due_weekday | default(0) | int(0) }}"
+          due_day_safe: "{{ due_day | default(1) | int(1) }}"
+          now_ts: "{{ as_timestamp(now()) }}"
+          today_midnight_ts: "{{ as_timestamp(today_at('00:00')) }}"
+          topic_safe: "{{ mqtt_topic | default('viewroad-status/jobs_tracker/' ~ job_id) }}"
+
+      - variables:
+          current_period_start_ts: >-
+            {% if repeat_type_safe == 'daily' %}
+              {{ today_midnight_ts | float(0) }}
+            {% elif repeat_type_safe == 'weekly' %}
+              {{ (today_midnight_ts | float(0)) - ((now().weekday() | int) * 86400) }}
+            {% elif repeat_type_safe == 'monthly' %}
+              {{ as_timestamp(now().replace(day=1, hour=0, minute=0, second=0, microsecond=0)) }}
+            {% else %}
+              {{ today_midnight_ts | float(0) }}
+            {% endif %}
+
+          next_period_start_ts: >-
+            {% if repeat_type_safe == 'daily' %}
+              {{ (today_midnight_ts | float(0)) + 86400 }}
+            {% elif repeat_type_safe == 'weekly' %}
+              {{ ((today_midnight_ts | float(0)) - ((now().weekday() | int) * 86400)) + 604800 }}
+            {% elif repeat_type_safe == 'monthly' %}
+              {% set next_month = (now().replace(day=28) + timedelta(days=4)).replace(day=1, hour=0, minute=0, second=0, microsecond=0) %}
+              {{ as_timestamp(next_month) }}
+            {% else %}
+              {{ (today_midnight_ts | float(0)) + 86400 }}
+            {% endif %}
+
+      - variables:
+          current_due_ts: >-
+            {% if repeat_type_safe == 'daily' %}
+              {{ (current_period_start_ts | float(0)) + (due_seconds | int) }}
+            {% elif repeat_type_safe == 'weekly' %}
+              {{ (current_period_start_ts | float(0)) + ((due_weekday_safe | int) * 86400) + (due_seconds | int) }}
+            {% elif repeat_type_safe == 'monthly' %}
+              {{ as_timestamp(now().replace(day=(due_day_safe | int), hour=(due_hour | int), minute=(due_minute | int), second=0, microsecond=0)) }}
+            {% else %}
+              {{ (current_period_start_ts | float(0)) + (due_seconds | int) }}
+            {% endif %}
+
+          next_due_ts: >-
+            {% if repeat_type_safe == 'daily' %}
+              {{ (next_period_start_ts | float(0)) + (due_seconds | int) }}
+            {% elif repeat_type_safe == 'weekly' %}
+              {{ (next_period_start_ts | float(0)) + ((due_weekday_safe | int) * 86400) + (due_seconds | int) }}
+            {% elif repeat_type_safe == 'monthly' %}
+              {% set next_month = (now().replace(day=28) + timedelta(days=4)).replace(day=1, hour=0, minute=0, second=0, microsecond=0) %}
+              {{ as_timestamp(next_month.replace(day=(due_day_safe | int), hour=(due_hour | int), minute=(due_minute | int), second=0, microsecond=0)) }}
+            {% else %}
+              {{ (next_period_start_ts | float(0)) + (due_seconds | int) }}
+            {% endif %}
+
+          overdue_after_minutes: >-
+            {% if repeat_type_safe == 'daily' %}
+              120
+            {% elif repeat_type_safe == 'weekly' %}
+              2880
+            {% elif repeat_type_safe == 'monthly' %}
+              20160
+            {% else %}
+              120
+            {% endif %}
+
+      - variables:
+          stored_last_completed_ts: >-
+            {% set v = state_attr(state_entity, 'last_completed_ts') %}
+            {{ 0 if v in [none, '', 'unknown', 'unavailable'] else v | float(0) }}
+
+          last_completed_ts: >-
+            {{ now_ts if mark_complete_bool else stored_last_completed_ts }}
+
+      - variables:
+          complete_bool: >-
+            {{ (last_completed_ts | float(0)) >= (current_period_start_ts | float(0)) }}
+
+          due_started_bool: >-
+            {% if repeat_type_safe == 'daily' %}
+              {{ (now_ts | float(0)) >= (current_due_ts | float(0)) }}
+            {% else %}
+              true
+            {% endif %}
+
+          overdue_started_bool: >-
+            {{ (now_ts | float(0)) >= ((current_due_ts | float(0)) + ((overdue_after_minutes | int(0)) * 60)) }}
+
+          minutes_since_required: >-
+            {% if (now_ts | float(0)) <= (current_due_ts | float(0)) %}
+              0
+            {% else %}
+              {{ (((now_ts | float(0)) - (current_due_ts | float(0))) / 60) | round(0) | int }}
+            {% endif %}
+
+          hours_since_required: >-
+            {% if (now_ts | float(0)) <= (current_due_ts | float(0)) %}
+              0
+            {% else %}
+              {{ (((now_ts | float(0)) - (current_due_ts | float(0))) / 3600) | round(0) | int }}
+            {% endif %}
+
+      - variables:
+          job_status: >-
+            {% if complete_bool | bool %}
+              Complete
+            {% elif not (due_started_bool | bool) %}
+              Not Due
+            {% elif overdue_started_bool | bool %}
+              Overdue
+            {% else %}
+              Due
+            {% endif %}
+
+          display_due_ts: >-
+            {% if complete_bool | bool %}
+              {{ next_due_ts | float(0) }}
+            {% else %}
+              {{ current_due_ts | float(0) }}
+            {% endif %}
+
+          overdue_minutes: >-
+            {% if job_status | trim == 'Overdue' %}
+              {{ minutes_since_required | int(0) }}
+            {% else %}
+              0
+            {% endif %}
+
+          overdue_hours: >-
+            {% if job_status | trim == 'Overdue' %}
+              {{ hours_since_required | int(0) }}
+            {% else %}
+              0
+            {% endif %}
+
+          hours_since_completed: >-
+            {% if (last_completed_ts | float(0)) > 0 %}
+              {{ (((now_ts | float(0)) - (last_completed_ts | float(0))) / 3600) | round(0) | int }}
+            {% else %}
+              unknown
+            {% endif %}
+
+          last_completed_time: >-
+            {% if (last_completed_ts | float(0)) > 0 %}
+              {{ (last_completed_ts | float(0)) | timestamp_custom('%H:%M', true) }}
+            {% else %}
+              Never
+            {% endif %}
+
+          last_completed_human: >-
+            {% set ts = last_completed_ts | float(0) %}
+            {% if ts <= 0 %}
+              Never
+            {% else %}
+              {% set d = ts | timestamp_custom('%Y-%m-%d', true) %}
+              {% set t = ts | timestamp_custom('%H:%M', true) %}
+              {% set today = now().strftime('%Y-%m-%d') %}
+              {% set yesterday = (as_timestamp(today_at('00:00')) - 86400) | timestamp_custom('%Y-%m-%d', true) %}
+              {% set completed_midnight = as_timestamp(strptime(d ~ ' 00:00:00', '%Y-%m-%d %H:%M:%S')) %}
+              {% set days_ago = ((as_timestamp(today_at('00:00')) - completed_midnight) / 86400) | round(0) | int %}
+              {% if d == today %}
+                Today @ {{ t }}
+              {% elif d == yesterday %}
+                Yesterday @ {{ t }}
+              {% elif days_ago < 7 %}
+                Last {{ ts | timestamp_custom('%A', true) }} @ {{ t }}
+              {% else %}
+                {{ days_ago }} days ago @ {{ t }}
+              {% endif %}
+            {% endif %}
+
+          next_due_human: >-
+            {% set ts = display_due_ts | float(0) %}
+            {% set d = ts | timestamp_custom('%Y-%m-%d', true) %}
+            {% set t = ts | timestamp_custom('%H:%M', true) %}
+            {% set today = now().strftime('%Y-%m-%d') %}
+            {% set tomorrow = (as_timestamp(today_at('00:00')) + 86400) | timestamp_custom('%Y-%m-%d', true) %}
+            {% set yesterday = (as_timestamp(today_at('00:00')) - 86400) | timestamp_custom('%Y-%m-%d', true) %}
+            {% set due_midnight = as_timestamp(strptime(d ~ ' 00:00:00', '%Y-%m-%d %H:%M:%S')) %}
+            {% set days_diff = ((due_midnight - as_timestamp(today_at('00:00'))) / 86400) | round(0) | int %}
+            {% if d == today %}
+              Today @ {{ t }}
+            {% elif d == tomorrow %}
+              Tomorrow @ {{ t }}
+            {% elif d == yesterday %}
+              Yesterday @ {{ t }}
+            {% elif days_diff > 1 and days_diff <= 7 %}
+              Next {{ ts | timestamp_custom('%A', true) }} @ {{ t }}
+            {% elif days_diff < 0 and days_diff > -7 %}
+              Last {{ ts | timestamp_custom('%A', true) }} @ {{ t }}
+            {% elif days_diff > 7 %}
+              In {{ days_diff }} days @ {{ t }}
+            {% elif days_diff < -7 %}
+              {{ 0 - days_diff }} days ago @ {{ t }}
+            {% else %}
+              {{ ts | timestamp_custom('%Y-%m-%d @ %H:%M', true) }}
+            {% endif %}
+
+      - action: mqtt.publish
+        data:
+          topic: "{{ topic_safe }}"
+          retain: true
+          qos: 1
+          payload: >-
+            {{
+              {
+                "job_id": job_id,
+                "job_name": job_name,
+                "repeat": repeat_type_safe,
+                "due_time": due_time_safe,
+                "due_weekday": due_weekday_safe | int,
+                "due_day": due_day_safe | int,
+
+                "state": job_status | trim,
+                "complete": complete_bool | bool,
+
+                "last_completed_ts": last_completed_ts | float(0),
+                "last_completed_time": last_completed_time,
+                "last_completed_human": last_completed_human,
+
+                "completed_for_period_ts": current_period_start_ts | float(0) if complete_bool | bool else 0,
+                "completed_for_due_ts": current_period_start_ts | float(0) if complete_bool | bool else 0,
+
+                "current_period_start_ts": current_period_start_ts | float(0),
+                "next_period_start_ts": next_period_start_ts | float(0),
+
+                "current_due_ts": current_due_ts | float(0),
+                "next_due_ts": next_due_ts | float(0),
+                "display_due_ts": display_due_ts | float(0),
+                "next_due_human": next_due_human,
+
+                "due_started": due_started_bool | bool,
+                "overdue_started": overdue_started_bool | bool,
+
+                "minutes_since_required": minutes_since_required | int(0),
+                "hours_since_required": hours_since_required | int(0),
+
+                "overdue_after_minutes": overdue_after_minutes | int(0),
+                "overdue_minutes": overdue_minutes | int(0),
+                "overdue_hours": overdue_hours | int(0),
+
+                "hours_since_completed": hours_since_completed,
+
+                "last_updated_local": (now_ts | float(0)) | timestamp_custom('%Y-%m-%d %H:%M:%S', true),
+                "mqtt_topic": topic_safe
+              } | tojson
+            }}
@@ -1,41 +1,51 @@
-###############################################################################
+#:########################################################################################:#
 # PACKAGE: OpenHASP Thermostat / Gas Heater Control
-# VERSION: v1.3 (2026-06-20)
+# VERSION: v1.5 (2026-06-22)
 # NODE/TOPIC ROOT: hasp/openhasp_1/
 #
 # PAGE 1: Gas heater / lounge environment
-# - p1b1 = main temperature display
-# - p1b2 = gas heater setpoint display
+# - p1b1 = gas heater setpoint large display
+# - p1b2 = actual lounge room temperature display
 # - p1b3 = gas heater setpoint down
 # - p1b4 = gas heater setpoint up
 # - p1b5 = gas heater status text
 # - p1b6 = gas heater operation / flame button
 # - p1b7 = humidity display
 #
-# PAGE 2: Lounge climate control
-# - p2b1 = main temperature display
-# - p2b2 = climate.lounge setpoint display
+# PAGE 2: Lounge climate heating control
+# - p2b1 = climate.lounge setpoint large display
+# - p2b2 = actual lounge room temperature display
 # - p2b3 = climate.lounge setpoint down 0.5°C
 # - p2b4 = climate.lounge setpoint up 0.5°C
 # - p2b5 = climate.lounge status text
 # - p2b6 = climate.lounge heat mode / sun button
 # - p2b7 = humidity display
 #
-# PAGE 3: Blank placeholder
+# PAGE 3: Lounge climate cooling control
+# - p3b1 = climate.lounge setpoint large display
+# - p3b2 = actual lounge room temperature display
+# - p3b3 = climate.lounge setpoint down 0.5°C
+# - p3b4 = climate.lounge setpoint up 0.5°C
+# - p3b5 = climate.lounge status text
+# - p3b6 = climate.lounge cool mode / snowflake button
+# - p3b7 = humidity display
 #
 # NOTES:
-# - p1b2/p1b7 and p2b2/p2b7 include their icons in the MQTT text payload so
-#   HA updates do not overwrite icons loaded from pages.jsonl.
+# - The large top display is the setpoint for that device/page.
+# - The middle-left temperature display is always the actual lounge room temp.
 # - p1b3/p1b4 are yellow.
 # - p1b6 is grey when OFF/BYPASS, yellow in AUTO, and red flame when firing.
 # - p2b3/p2b4 are pink.
 # - p2b6 turns climate.lounge ON and sets HVAC mode to heat.
 # - p2b6 is pink only when climate.lounge is in heat mode.
-###############################################################################
+# - p3b3/p3b4 are light blue.
+# - p3b6 toggles climate.lounge OFF if already cooling; otherwise sets COOL.
+# - p3b6 is light blue only when climate.lounge is in cool mode.
+#:########################################################################################:#

-###############################################################################
+#:########################################################################################:#
 # MQTT ENTITIES
-###############################################################################
+#:########################################################################################:#

 mqtt:
  sensor:
@@ -70,16 +80,16 @@ mqtt:
          {{ raw }}
        {% endif %}

-###############################################################################
+#:########################################################################################:#
 # AUTOMATIONS
-###############################################################################
+#:########################################################################################:#

 automation:
  # -------------------------------------------------------------------------
-  # Lounge temperature display on page 1 and page 2
+  # Actual lounge room temperature display on page 1, page 2, and page 3
  # -------------------------------------------------------------------------
  - id: hasp_lounge_temp_to_page_text
-    alias: "HASP: update lounge temperature displays"
+    alias: "HASP: update lounge actual temperature displays"
    mode: queued
    trigger:
      - platform: state
@@ -104,10 +114,10 @@ automation:
      - service: script.hasp_publish_heater_status_text

  # -------------------------------------------------------------------------
-  # Gas heater setpoint display on page 1
+  # Gas heater setpoint large display on page 1
  # -------------------------------------------------------------------------
  - id: hasp_setpoint_to_btn_text
-    alias: "HASP: update gas heater setpoint (p1b2.text)"
+    alias: "HASP: update gas heater setpoint (p1b1.text)"
    mode: queued
    trigger:
      - platform: state
@@ -116,7 +126,7 @@ automation:
      - service: script.hasp_publish_heater_setpoint

  # -------------------------------------------------------------------------
-  # Humidity display on page 1 and page 2
+  # Humidity display on page 1, page 2, and page 3
  # -------------------------------------------------------------------------
  - id: hasp_humidity_to_btn_text
    alias: "HASP: update humidity displays"
@@ -191,10 +201,10 @@ automation:
      - service: script.hasp_apply_heat_button_state

  # -------------------------------------------------------------------------
-  # Page 2 climate.lounge text and button state updates
+  # Page 2 and page 3 climate.lounge text and button state updates
  # -------------------------------------------------------------------------
  - id: hasp_lounge_climate_to_page2
-    alias: "HASP: update lounge climate page 2"
+    alias: "HASP: update lounge climate pages 2 and 3"
    mode: queued
    trigger:
      - platform: state
@@ -202,6 +212,8 @@ automation:
    action:
      - service: script.hasp_push_page2_climate_texts
      - service: script.hasp_apply_climate_heat_button_state
+      - service: script.hasp_push_page3_climate_texts
+      - service: script.hasp_apply_climate_cool_button_state

  # -------------------------------------------------------------------------
  # Page 2 climate.lounge setpoint down
@@ -225,6 +237,7 @@ automation:
            {{ (current - 0.5) | round(1) }}
      - delay: "00:00:01"
      - service: script.hasp_push_page2_climate_texts
+      - service: script.hasp_push_page3_climate_texts

  # -------------------------------------------------------------------------
  # Page 2 climate.lounge setpoint up
@@ -248,6 +261,7 @@ automation:
            {{ (current + 0.5) | round(1) }}
      - delay: "00:00:01"
      - service: script.hasp_push_page2_climate_texts
+      - service: script.hasp_push_page3_climate_texts

  # -------------------------------------------------------------------------
  # Page 2 climate.lounge heat mode button
@@ -273,6 +287,97 @@ automation:
      - delay: "00:00:01"
      - service: script.hasp_push_page2_climate_texts
      - service: script.hasp_apply_climate_heat_button_state
+      - service: script.hasp_push_page3_climate_texts
+      - service: script.hasp_apply_climate_cool_button_state
+
+  # -------------------------------------------------------------------------
+  # Page 3 climate.lounge setpoint down
+  # -------------------------------------------------------------------------
+  - id: hasp_page3_climate_down_press
+    alias: "HASP: p3b3 up -> lounge climate setpoint DOWN 0.5"
+    mode: queued
+    trigger:
+      - platform: mqtt
+        topic: "hasp/openhasp_1/state/p3b3"
+    condition:
+      - condition: template
+        value_template: "{{ trigger.payload_json.event | default('') == 'up' }}"
+    action:
+      - service: climate.set_temperature
+        target:
+          entity_id: climate.lounge
+        data:
+          temperature: >
+            {% set current = state_attr('climate.lounge', 'temperature') | float(20) %}
+            {{ (current - 0.5) | round(1) }}
+      - delay: "00:00:01"
+      - service: script.hasp_push_page2_climate_texts
+      - service: script.hasp_push_page3_climate_texts
+
+  # -------------------------------------------------------------------------
+  # Page 3 climate.lounge setpoint up
+  # -------------------------------------------------------------------------
+  - id: hasp_page3_climate_up_press
+    alias: "HASP: p3b4 up -> lounge climate setpoint UP 0.5"
+    mode: queued
+    trigger:
+      - platform: mqtt
+        topic: "hasp/openhasp_1/state/p3b4"
+    condition:
+      - condition: template
+        value_template: "{{ trigger.payload_json.event | default('') == 'up' }}"
+    action:
+      - service: climate.set_temperature
+        target:
+          entity_id: climate.lounge
+        data:
+          temperature: >
+            {% set current = state_attr('climate.lounge', 'temperature') | float(20) %}
+            {{ (current + 0.5) | round(1) }}
+      - delay: "00:00:01"
+      - service: script.hasp_push_page2_climate_texts
+      - service: script.hasp_push_page3_climate_texts
+
+  # -------------------------------------------------------------------------
+  # Page 3 climate.lounge cool mode button
+  # - If already cooling, turn OFF
+  # - Otherwise turn ON and set COOL
+  # -------------------------------------------------------------------------
+  - id: hasp_page3_climate_cool_press
+    alias: "HASP: p3b6 up -> lounge climate cool toggle"
+    mode: queued
+    trigger:
+      - platform: mqtt
+        topic: "hasp/openhasp_1/state/p3b6"
+    condition:
+      - condition: template
+        value_template: "{{ trigger.payload_json.event | default('') == 'up' }}"
+    action:
+      - choose:
+          - conditions:
+              - condition: state
+                entity_id: climate.lounge
+                state: "cool"
+            sequence:
+              - service: climate.turn_off
+                target:
+                  entity_id: climate.lounge
+
+        default:
+          - service: climate.turn_on
+            target:
+              entity_id: climate.lounge
+          - service: climate.set_hvac_mode
+            target:
+              entity_id: climate.lounge
+            data:
+              hvac_mode: cool
+
+      - delay: "00:00:01"
+      - service: script.hasp_push_page2_climate_texts
+      - service: script.hasp_apply_climate_heat_button_state
+      - service: script.hasp_push_page3_climate_texts
+      - service: script.hasp_apply_climate_cool_button_state

  # -------------------------------------------------------------------------
  # Push all screen state when Home Assistant starts
@@ -300,9 +405,9 @@ automation:
      - delay: "00:00:05"
      - service: script.hasp_push_static_texts

-###############################################################################
+#:########################################################################################:#
 # SCRIPTS
-###############################################################################
+#:########################################################################################:#

 script:
  # -------------------------------------------------------------------------
@@ -315,6 +420,7 @@ script:
      - service: script.hasp_style_center_info_buttons
      - service: script.hasp_style_page1_control_buttons
      - service: script.hasp_style_page2_control_buttons
+      - service: script.hasp_style_page3_control_buttons
      - service: script.hasp_publish_lounge_temp_displays
      - service: script.hasp_publish_heater_status_text
      - service: script.hasp_publish_heater_setpoint
@@ -322,61 +428,62 @@ script:
      - service: script.hasp_apply_heat_button_state
      - service: script.hasp_push_page2_climate_texts
      - service: script.hasp_apply_climate_heat_button_state
+      - service: script.hasp_push_page3_climate_texts
+      - service: script.hasp_apply_climate_cool_button_state

  # -------------------------------------------------------------------------
-  # Publish lounge temperature to page 1 and page 2
+  # Publish actual lounge room temperature to all middle-left displays
+  # p1b2 = actual room temperature
+  # p2b2 = actual room temperature
+  # p3b2 = actual room temperature
  # -------------------------------------------------------------------------
  hasp_publish_lounge_temp_displays:
-    alias: "HASP: publish lounge temperature displays"
-    mode: queued
-    sequence:
-      - service: mqtt.publish
-        data:
-          topic: "hasp/openhasp_1/command/p1b1.text"
-          payload: >-
-            {% set raw = states('sensor.lounge_environment_lounge_environment_temperature') %}
-            {% set cleaned = raw
-              | replace('°C', '')
-              | replace('° C', '')
-              | replace('C', '')
-              | trim %}
-            {% if cleaned not in ['unknown', 'unavailable', '', 'none', 'None'] %}
-              {{ cleaned | float(0) | round(1) }}°C
-            {% else %}
-              --°C
-            {% endif %}
-
-      - service: mqtt.publish
-        data:
-          topic: "hasp/openhasp_1/command/p2b1.text"
-          payload: >-
-            {% set raw = states('sensor.lounge_environment_lounge_environment_temperature') %}
-            {% set cleaned = raw
-              | replace('°C', '')
-              | replace('° C', '')
-              | replace('C', '')
-              | trim %}
-            {% if cleaned not in ['unknown', 'unavailable', '', 'none', 'None'] %}
-              {{ cleaned | float(0) | round(1) }}°C
-            {% else %}
-              --°C
-            {% endif %}
-
-  # -------------------------------------------------------------------------
-  # Publish gas heater setpoint to page 1
-  # -------------------------------------------------------------------------
-  hasp_publish_heater_setpoint:
-    alias: "HASP: publish gas heater setpoint"
+    alias: "HASP: publish lounge actual temperature displays"
    mode: queued
    sequence:
      - service: mqtt.publish
        data:
          topic: "hasp/openhasp_1/command/p1b2.text"
          payload: >-
-            {% set raw = states('sensor.rinnai_neo_gas_heater_setpoint_text') %}
+            {% set raw = states('sensor.lounge_environment_lounge_environment_temperature') %}
            {% set cleaned = raw
              | replace('°C', '')
              | replace('° C', '')
+              | replace('℃', '')
+              | replace('C', '')
+              | trim %}
+            {% if cleaned not in ['unknown', 'unavailable', '', 'none', 'None'] %}
+              {{ '\uE50F' }} {{ cleaned | float(0) | round(1) }}°C
+            {% else %}
+              {{ '\uE50F' }} --°C
+            {% endif %}
+
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p2b2.text"
+          payload: >-
+            {% set raw = states('sensor.lounge_environment_lounge_environment_temperature') %}
+            {% set cleaned = raw
+              | replace('°C', '')
+              | replace('° C', '')
+              | replace('℃', '')
+              | replace('C', '')
+              | trim %}
+            {% if cleaned not in ['unknown', 'unavailable', '', 'none', 'None'] %}
+              {{ '\uE50F' }} {{ cleaned | float(0) | round(1) }}°C
+            {% else %}
+              {{ '\uE50F' }} --°C
+            {% endif %}
+
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b2.text"
+          payload: >-
+            {% set raw = states('sensor.lounge_environment_lounge_environment_temperature') %}
+            {% set cleaned = raw
+              | replace('°C', '')
+              | replace('° C', '')
+              | replace('℃', '')
              | replace('C', '')
              | trim %}
            {% if cleaned not in ['unknown', 'unavailable', '', 'none', 'None'] %}
@@ -386,7 +493,32 @@ script:
            {% endif %}

  # -------------------------------------------------------------------------
-  # Publish humidity to page 1 and page 2
+  # Publish gas heater setpoint to page 1 large top display
+  # p1b1 = gas heater setpoint
+  # -------------------------------------------------------------------------
+  hasp_publish_heater_setpoint:
+    alias: "HASP: publish gas heater setpoint"
+    mode: queued
+    sequence:
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p1b1.text"
+          payload: >-
+            {% set raw = states('sensor.rinnai_neo_gas_heater_setpoint_text') %}
+            {% set cleaned = raw
+              | replace('°C', '')
+              | replace('° C', '')
+              | replace('℃', '')
+              | replace('C', '')
+              | trim %}
+            {% if cleaned not in ['unknown', 'unavailable', '', 'none', 'None'] %}
+              {{ '\uE238' }}{{ cleaned | float(0) | round(1) }}°C
+            {% else %}
+              {{ '\uE238' }}--°C
+            {% endif %}
+
+  # -------------------------------------------------------------------------
+  # Publish humidity to page 1, page 2, and page 3
  # -------------------------------------------------------------------------
  hasp_publish_humidity_displays:
    alias: "HASP: publish humidity displays"
@@ -416,6 +548,18 @@ script:
              {{ '\uE58C' }} {{ cleaned }}%
            {% endif %}

+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b7.text"
+          payload: >-
+            {% set raw = states('sensor.lounge_environment_humidity_mqtt') %}
+            {% set cleaned = raw | replace('%', '') | trim %}
+            {% if cleaned in ['unknown', 'unavailable', '', 'none', 'None'] %}
+              {{ '\uE58C' }} --%
+            {% else %}
+              {{ '\uE58C' }} {{ cleaned }}%
+            {% endif %}
+
  # -------------------------------------------------------------------------
  # Publish gas heater status text to page 1 bottom label
  #
@@ -423,10 +567,7 @@ script:
  # - OFF                    -> Off
  # - BYPASS (Remote Only)   -> Bypass (Remote Only)
  # - Auto but flame OFF     -> Auto (Up to Temp)
-  # - Auto (Level 1)         -> Auto + 1 flame icon
-  # - Auto (Level 2)         -> Auto + 2 flame icons
-  # - Auto (Level 3)         -> Auto + 3 flame icons
-  # - Auto (Level 4)         -> Auto + 4 flame icons
+  # - Auto while firing      -> Auto (Level 1), Auto (Level 2), etc.
  # -------------------------------------------------------------------------
  hasp_publish_heater_status_text:
    alias: "HASP: publish heater status text"
@@ -440,7 +581,6 @@ script:
            {% set op = states('switch.rinnai_neo_gas_heater_heater_operation') %}
            {% set flame_on = is_state('switch.rinnai_neo_gas_heater_rinnai_neo_gas_heater_activate_flame', 'on') %}
            {% set s = states('sensor.rinnai_neo_gas_heater_rinnai_neo_gas_heater_status_text') %}
-            {% set flame = '\uE238' %}

            {% if mode == 'OFF' %}
              Off
@@ -449,17 +589,7 @@ script:
            {% elif op == 'on' and not flame_on %}
              Auto (Up to Temp)
            {% elif s not in ['unknown', 'unavailable', '', 'none', 'None'] %}
-              {% set matches = s | regex_findall('Level ([0-9]+)') %}
-              {% if matches | length > 0 %}
-                {% set level = matches[0] | int(0) %}
-              {% else %}
-                {% set level = 0 %}
-              {% endif %}
-              {% if level > 0 %}
-                Auto {{ flame * level }}
-              {% else %}
              {{ s }}
-              {% endif %}
            {% elif mode not in ['unknown', 'unavailable', '', 'none', 'None'] %}
              {{ mode }}
            {% else %}
@@ -604,13 +734,13 @@ script:
    sequence:
      - service: mqtt.publish
        data:
-          topic: "hasp/openhasp_1/command/p2b2.text"
+          topic: "hasp/openhasp_1/command/p2b1.text"
          payload: >-
            {% set target = state_attr('climate.lounge', 'temperature') %}
            {% if target is not none %}
-              {{ '\uE50F' }} {{ target | float(0) | round(1) }}°C
+              {{ '\uE5A8' }}{{ target | float(0) | round(1) }}°C
            {% else %}
-              {{ '\uE50F' }} --°C
+              {{ '\uE5A8' }}--°C
            {% endif %}

      - service: mqtt.publish
@@ -663,6 +793,74 @@ script:
              {{ mode_text }}
            {% endif %}

+  # -------------------------------------------------------------------------
+  # Push page 3 climate.lounge setpoint and status text
+  # -------------------------------------------------------------------------
+  hasp_push_page3_climate_texts:
+    alias: "HASP: push page 3 climate texts"
+    mode: queued
+    sequence:
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b1.text"
+          payload: >-
+            {% set target = state_attr('climate.lounge', 'temperature') %}
+            {% if target is not none %}
+              {{ '\uE717' }}{{ target | float(0) | round(1) }}°C
+            {% else %}
+              {{ '\uE717' }}--°C
+            {% endif %}
+
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b5.text"
+          payload: >-
+            {% set mode = states('climate.lounge') %}
+            {% set mode_map = {
+              'off': 'Off',
+              'heat': 'Heating',
+              'cool': 'Cooling',
+              'heat_cool': 'Auto',
+              'auto': 'Auto',
+              'dry': 'Dry',
+              'fan_only': 'Fan'
+            } %}
+            {% set mode_text = mode_map.get(mode, mode | replace('_', ' ') | title) %}
+
+            {% set preset = state_attr('climate.lounge', 'preset_mode') | default('', true) | string | lower %}
+            {% set fan = state_attr('climate.lounge', 'fan_mode') | default('', true) | string | lower %}
+            {% set swing = state_attr('climate.lounge', 'swing_mode') | default('', true) | string | lower %}
+
+            {% set eco_attr = state_attr('climate.lounge', 'eco') | default('', true) | string | lower %}
+            {% set powerful_attr = state_attr('climate.lounge', 'powerful') | default('', true) | string | lower %}
+            {% set quiet_attr = state_attr('climate.lounge', 'quiet') | default('', true) | string | lower %}
+            {% set nanoe_attr = state_attr('climate.lounge', 'nanoe') | default('', true) | string | lower %}
+            {% set nanoe_x_attr = state_attr('climate.lounge', 'nanoe_x') | default('', true) | string | lower %}
+
+            {% set ns = namespace(extras=[]) %}
+
+            {% if 'eco' in preset or eco_attr in ['on', 'true', '1', 'yes'] %}
+              {% set ns.extras = ns.extras + ['Eco'] %}
+            {% endif %}
+
+            {% if 'powerful' in preset or 'boost' in preset or powerful_attr in ['on', 'true', '1', 'yes'] %}
+              {% set ns.extras = ns.extras + ['Powerful'] %}
+            {% endif %}
+
+            {% if 'quiet' in preset or 'quiet' in fan or quiet_attr in ['on', 'true', '1', 'yes'] %}
+              {% set ns.extras = ns.extras + ['Quiet'] %}
+            {% endif %}
+
+            {% if 'nanoe' in preset or 'nanoe' in swing or nanoe_attr in ['on', 'true', '1', 'yes'] or nanoe_x_attr in ['on', 'true', '1', 'yes'] %}
+              {% set ns.extras = ns.extras + ['nanoe-x'] %}
+            {% endif %}
+
+            {% if ns.extras | length > 0 %}
+              {{ mode_text }} ({{ ns.extras | join(', ') }})
+            {% else %}
+              {{ mode_text }}
+            {% endif %}
+
  # -------------------------------------------------------------------------
  # Apply page 2 climate.lounge heat button state
  # -------------------------------------------------------------------------
@@ -673,7 +871,7 @@ script:
      - service: mqtt.publish
        data:
          topic: "hasp/openhasp_1/command/p2b6.text"
-          payload: "\uE599"
+          payload: "\uE5A8"

      - choose:
          # climate.lounge is ON and in HEAT mode -> pink sun
@@ -718,7 +916,61 @@ script:
              payload: "#2F3240"

  # -------------------------------------------------------------------------
-  # Style page 1 and page 2 setpoint/humidity display buttons as black panels
+  # Apply page 3 climate.lounge cool button state
+  # -------------------------------------------------------------------------
+  hasp_apply_climate_cool_button_state:
+    alias: "HASP: apply lounge climate cool button state"
+    mode: queued
+    sequence:
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b6.text"
+          payload: "\uE717"
+
+      - choose:
+          # climate.lounge is ON and in COOL mode -> light blue snowflake
+          - conditions:
+              - condition: state
+                entity_id: climate.lounge
+                state: "cool"
+            sequence:
+              - service: mqtt.publish
+                data:
+                  topic: "hasp/openhasp_1/command/p3b6.text_color"
+                  payload: "#FFFFFF"
+              - service: mqtt.publish
+                data:
+                  topic: "hasp/openhasp_1/command/p3b6.bg_color"
+                  payload: "#0288D1"
+              - service: mqtt.publish
+                data:
+                  topic: "hasp/openhasp_1/command/p3b6.bg_grad_color"
+                  payload: "#4FC3F7"
+              - service: mqtt.publish
+                data:
+                  topic: "hasp/openhasp_1/command/p3b6.border_color"
+                  payload: "#0288D1"
+
+        default:
+          - service: mqtt.publish
+            data:
+              topic: "hasp/openhasp_1/command/p3b6.text_color"
+              payload: "#C0C0C0"
+          - service: mqtt.publish
+            data:
+              topic: "hasp/openhasp_1/command/p3b6.bg_color"
+              payload: "#2F3240"
+          - service: mqtt.publish
+            data:
+              topic: "hasp/openhasp_1/command/p3b6.bg_grad_color"
+              payload: "#2F3240"
+          - service: mqtt.publish
+            data:
+              topic: "hasp/openhasp_1/command/p3b6.border_color"
+              payload: "#2F3240"
+
+  # -------------------------------------------------------------------------
+  # Style page 1, page 2, and page 3 actual temp/humidity displays
  # -------------------------------------------------------------------------
  hasp_style_center_info_buttons:
    alias: "HASP: style centre info buttons"
@@ -792,6 +1044,40 @@ script:
          topic: "hasp/openhasp_1/command/p2b7.border_color"
          payload: "#000000"

+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b2.text_color"
+          payload: "#FFFFFF"
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b2.bg_color"
+          payload: "#000000"
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b2.bg_grad_color"
+          payload: "#000000"
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b2.border_color"
+          payload: "#000000"
+
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b7.text_color"
+          payload: "#FFFFFF"
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b7.bg_color"
+          payload: "#000000"
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b7.bg_grad_color"
+          payload: "#000000"
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b7.border_color"
+          payload: "#000000"
+
  # -------------------------------------------------------------------------
  # Style page 1 gas heater up/down buttons yellow
  # p1b6 is state-driven by hasp_apply_heat_button_state.
@@ -875,3 +1161,45 @@ script:
        data:
          topic: "hasp/openhasp_1/command/p2b4.border_color"
          payload: "#C2185B"
+
+  # -------------------------------------------------------------------------
+  # Style page 3 climate up/down buttons light blue
+  # p3b6 is state-driven by hasp_apply_climate_cool_button_state.
+  # -------------------------------------------------------------------------
+  hasp_style_page3_control_buttons:
+    alias: "HASP: style page 3 control buttons"
+    mode: queued
+    sequence:
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b3.text_color"
+          payload: "#FFFFFF"
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b3.bg_color"
+          payload: "#0288D1"
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b3.bg_grad_color"
+          payload: "#4FC3F7"
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b3.border_color"
+          payload: "#0288D1"
+
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b4.text_color"
+          payload: "#FFFFFF"
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b4.bg_color"
+          payload: "#0288D1"
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b4.bg_grad_color"
+          payload: "#4FC3F7"
+      - service: mqtt.publish
+        data:
+          topic: "hasp/openhasp_1/command/p3b4.border_color"
+          payload: "#0288D1"
Author	SHA1	Message	Date
zorruno	0db246aefa	openhasp mods and file shuffling	2026-06-22 21:38:18 +12:00
ESPHome Device Builder	e7b0677810	Edit esp-astroclockstepper1.yaml	2026-06-22 15:29:47 +12:00
ESPHome Device Builder	593366b65a	Edit esp-astroclockstepper1.yaml	2026-06-22 15:17:14 +12:00
ESPHome Device Builder	9a28eb8c0f	Delete esp-astro_clock_stepper1.yaml	2026-06-22 14:57:04 +12:00
ESPHome Device Builder	c9ac6e80b9	Add esp-astroclockstepper1.yaml	2026-06-22 14:57:04 +12:00
ESPHome Device Builder	0c6260e67a	Add esp-astro_clock_stepper1.yaml	2026-06-22 14:53:38 +12:00