245 lines
7.9 KiB
YAML
245 lines
7.9 KiB
YAML
############################################
|
|
#############################################
|
|
# ATHOM 15W RGBWW Bulb Flasher
|
|
#
|
|
# # V1.0 2025-02-15 Initial Version
|
|
#
|
|
# Device https://www.athom.tech/blank-1/15w-color-bulb
|
|
#
|
|
# DESCRIPTION
|
|
# Starts up and flashes a RGBWW lightbulb a white colour
|
|
# On and off time (duty cycle) is configurable
|
|
# Colour Temp (in K) is configurable
|
|
# There is no fading between transitions
|
|
#
|
|
#############################################
|
|
#############################################
|
|
|
|
|
|
#############################################
|
|
# USER VARIABLE SUBSTITUTIONS
|
|
# Give the device a useful name & description here
|
|
# and change values accordingly.
|
|
#############################################
|
|
substitutions:
|
|
devicename: esp-athombulbflasher
|
|
friendly_name: "Flasher for Athom 15W Bulb"
|
|
description_comment: "Athom RGBWW light bulb that will flash on boot and allow colour temp & duty cycle adjustment"
|
|
|
|
# Adjust the color temperature here (200 mired is approx 5000k
|
|
white_temp: "3000K"
|
|
|
|
# Adjust the ON/OFF times for flashing.
|
|
# 600ms on, 400ms off => 60% ON, 40% OFF duty cycle
|
|
on_time_ms: "500ms"
|
|
off_time_ms: "500ms"
|
|
|
|
|
|
#############################################
|
|
# OTHER VARIABLE SUBSTITUTIONS
|
|
# Give the device a useful name & description here
|
|
# and change values accordingly.
|
|
#############################################
|
|
|
|
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
|
api_key: !secret esp-athombulbflasher_api_key # unfortunately you can't use substitutions inside secrets names
|
|
ota_pass: !secret esp-athombulbflasher_ota_pass # unfortunately you can't use substitutions inside secrets names
|
|
wifi_ssid: !secret wifi_ssid
|
|
wifi_password: !secret wifi_password
|
|
fallback_ap_password: !secret fallback_ap_password
|
|
|
|
# Add these if we are giving it a static ip, or remove them in the Wifi section
|
|
#static_ip_address: !secret esp-athombulbflasher_static_ip
|
|
#static_ip_gateway: !secret esp-athombulbflasher_gateway
|
|
#static_ip_subnet: !secret esp-athombulbflasher_subnet
|
|
|
|
#mqtt_server: !secret mqtt_server
|
|
#mqtt_username: !secret mqtt_username
|
|
#mqtt_password: !secret mqtt_password
|
|
#mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
|
|
|
|
# Add these if we are using the internal web server (this is pretty processor intensive)
|
|
#web_server_username: !secret web_server_username
|
|
#web_server_password: !secret web_server_password
|
|
|
|
#update_interval: 60s # update time for for general sensors etc
|
|
|
|
|
|
#############################################
|
|
# ESP Platform and Framework
|
|
# https://esphome.io/components/esp32.html
|
|
#############################################
|
|
esphome:
|
|
name: ${devicename}
|
|
friendly_name: ${friendly_name}
|
|
comment: ${description_comment} # appears on the esphome page in HA
|
|
on_boot:
|
|
priority: 800
|
|
then:
|
|
- light.turn_on:
|
|
id: my_light
|
|
effect: "Flashing White"
|
|
|
|
#############################################
|
|
# ESP Platform and Framework
|
|
# https://esphome.io/components/esp32.html
|
|
#############################################
|
|
esp8266:
|
|
board: esp01_1m
|
|
|
|
#############################################
|
|
# ESPHome Logging Enable
|
|
# https://esphome.io/components/logger.html
|
|
#############################################
|
|
logger:
|
|
level: INFO # INFO Level suggested, or DEBUG for testing
|
|
#baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
|
#esp8266_store_log_strings_in_flash: false
|
|
#tx_buffer_size: 64
|
|
|
|
#############################################
|
|
# Enable the Home Assistant API
|
|
# https://esphome.io/components/api.html
|
|
#############################################
|
|
api:
|
|
encryption:
|
|
key: ${api_key}
|
|
|
|
#############################################
|
|
# Enable Over the Air Update Capability
|
|
# https://esphome.io/components/ota.html?highlight=ota
|
|
#############################################
|
|
ota:
|
|
- platform: esphome
|
|
password: ${ota_pass}
|
|
|
|
#############################################
|
|
# Safe Mode
|
|
# Safe mode will detect boot loops
|
|
# https://esphome.io/components/safe_mode
|
|
#############################################
|
|
safe_mode:
|
|
|
|
#############################################
|
|
# Wifi Settings
|
|
# https://esphome.io/components/wifi.html
|
|
#
|
|
# Power Save mode (can reduce wifi reliability)
|
|
# NONE (least power saving, Default for ESP8266)
|
|
# LIGHT (Default for ESP32)
|
|
# HIGH (most power saving)
|
|
#############################################
|
|
wifi:
|
|
ssid: ${wifi_ssid}
|
|
password: ${wifi_password}
|
|
#power_save_mode: LIGHT # https://esphome.io/components/wifi.html#wifi-power-save-mode
|
|
#manual_ip: # optional static IP address
|
|
#static_ip: ${static_ip_address}
|
|
#gateway: ${static_ip_gateway}
|
|
#subnet: ${static_ip_subnet}
|
|
ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
|
ssid: ${devicename} AP
|
|
password: ${fallback_ap_password}
|
|
ap_timeout: 30min # Time until it brings up fallback AP. default is 1min
|
|
|
|
captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails
|
|
|
|
|
|
#############################################
|
|
# MQTT Monitoring
|
|
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
|
# MUST also have api enabled if you enable MQTT
|
|
#############################################
|
|
#mqtt:
|
|
#broker: ${mqtt_server}
|
|
#topic_prefix: ${mqtt_topic}/${devicename}
|
|
#username: ${mqtt_username}
|
|
#password: ${mqtt_password}
|
|
##discovery: True # enable entity discovery (true is default)
|
|
##discover_ip: True # enable device discovery (true is default)
|
|
|
|
|
|
#############################################
|
|
# Web Portal for display and monitoring
|
|
# Turning this off is probably a good idea to save resources.
|
|
# https://esphome.io/components/web_server.html
|
|
#############################################
|
|
#web_server:
|
|
# port: 80
|
|
# auth:
|
|
# username: ${web_server_username} # probably a good idea to secure it
|
|
# password: ${web_server_password}
|
|
|
|
|
|
|
|
# ---------------------------------------------------------
|
|
# OUTPUTS: 5 x PWM channels for the Athom 15W RGBWW bulb
|
|
# ---------------------------------------------------------
|
|
output:
|
|
- platform: esp8266_pwm
|
|
id: output_red
|
|
pin: GPIO4
|
|
frequency: 1000 Hz
|
|
|
|
- platform: esp8266_pwm
|
|
id: output_green
|
|
pin: GPIO5
|
|
frequency: 1000 Hz
|
|
|
|
- platform: esp8266_pwm
|
|
id: output_blue
|
|
pin: GPIO12
|
|
frequency: 1000 Hz
|
|
|
|
# Typically one channel is cold white...
|
|
- platform: esp8266_pwm
|
|
id: output_cold_white
|
|
pin: GPIO14
|
|
frequency: 1000 Hz
|
|
|
|
# ...and one channel is warm white (inverted on GPIO13).
|
|
- platform: esp8266_pwm
|
|
id: output_warm_white
|
|
pin: GPIO13
|
|
frequency: 1000 Hz
|
|
inverted: true
|
|
|
|
# ---------------------------------------------------------
|
|
# LIGHT COMPONENT: RGBWW + a strobe effect for flashing
|
|
# ---------------------------------------------------------
|
|
light:
|
|
- platform: rgbww
|
|
name: ${friendly_name}
|
|
id: my_light
|
|
red: output_red
|
|
green: output_green
|
|
blue: output_blue
|
|
cold_white: output_cold_white
|
|
warm_white: output_warm_white
|
|
|
|
# Typical white temperature mapping for RGBWW
|
|
cold_white_color_temperature: 6500 K
|
|
warm_white_color_temperature: 2700 K
|
|
|
|
# Ensure it always powers on (and with our desired effect).
|
|
restore_mode: ALWAYS_ON
|
|
|
|
# You can omit this or set it to zero for no fade on effect changes.
|
|
default_transition_length: 0s
|
|
|
|
# The custom strobe effect for flashing white
|
|
effects:
|
|
- strobe:
|
|
name: "Flashing White"
|
|
colors:
|
|
# Note the Kelvin value is replaced at compile time:
|
|
- state: True
|
|
brightness: 100%
|
|
color_temperature: "${white_temp}"
|
|
duration: ${on_time_ms}
|
|
- state: False
|
|
brightness: 0%
|
|
color_temperature: "${white_temp}"
|
|
duration: ${off_time_ms}
|
|
|