zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
master
zorruno-homeassistant/esphome/esp-entrancelightswitch.yaml
T
root a8d2927274 yaml layout updates to v1.x
2026-02-25 21:05:21 +13:00

212 lines
8.4 KiB
YAML
Raw Permalink Blame History

#:########################################################################################:#
# TITLE: MAIN ENTRANCE LIGHTSWITCH
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-entrancelightswitch.yaml
#:########################################################################################:#
# VERSIONS:
# V3.8 2026-02-25 Updated yaml to zorruno layout V1.1
# V3.7 2025-09-15 Upload to this lightswitch from copy
#:########################################################################################:#
# HARDWARE:
# - Zemismart KS-811 Double push button (ESP8266)
# - Status LED: GPIO2
# - Buttons: GPIO16 (Button 1), GPIO5 (Button 2)
# - Relays: GPIO13 (Relay 1), GPIO12 (Relay 2)
# - Pinout/schematic: https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
#:########################################################################################:#
# OPERATION NOTES:
# - Button 1 toggles Relay 1 (Entrance Lights).
# - Relay 2 is forced ON at boot (permanently on) to power an external light controller.
# - Button 2 is currently not assigned to any action (relay remains ON from boot).
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant OFFLINE, but Network and MQTT ONLINE
# - Physical button control continues (Relay 1 toggles locally)
# - Relay 2 remains ON (external controller stays powered)
# b) MQTT OFFLINE (but WiFi/Network and HA API ONLINE)
# - Physical button control continues
# - HA control continues via API
# c) Entire WiFi/Network OFFLINE
# - Physical button control continues (local operation)
# - Relay 2 remains ON (external controller stays powered)
# - Accurate time is NOT needed (SNTP not needed)
#:########################################################################################:#
#:########################################################################################:#
# SUBSTITUTIONS: Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
# Device Naming
device_name: "esp-entrancelightswitch"
friendly_name: "Main Entrance Lightswitch (2)"
description_comment: "Main Entrance lightswitch using a Zemismart KS-811 Double Push Button. Main Lights (1), Bench Lights (2) (Layout V1.1)"
device_area: "Kitchen" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "Zemismart Technologies.KS-811 Double" # Project Details
project_version: "v3.8" # Project version denotes release of yaml file, allowing checking of deployed vs latest version
# Passwords & Secrets (unfortunately you can't use substitutions inside secrets names)
api_key: !secret esp-api_key
ota_pass: !secret esp-ota_pass
static_ip_address: !secret esp-entrancelightswitch_ip
#mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
#mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
# Don't forget to switch it back when changed.
current_ip_address: ${static_ip_address}
# Device Settings
log_level: "INFO" # NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for general sensors etc
# MQTT LOCAL Controls
#mqtt_device_name: "bedroom2-lights"
#mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}"
#mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}"
# Switch Naming
switch_1_name: "Entrance Lights"
switch_2_name: "External Light Controller" # permanently on, and pushbutton sends MQTT (not configured here)
#switch_3_name: "Nil"
#:########################################################################################:#
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
local_current_ip_address: "${current_ip_address}"
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
common_api: !include
file: common/api_common.yaml
#file: common/api_common_noencryption.yaml
vars:
local_api_key: "${api_key}"
#### MQTT ####
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
#### WEB PORTAL ####
#common_webportal: !include common/webportal_common.yaml
#### SNTP (Only use if you want/need accurate timeclocks) ####
#common_sntp: !include common/sntp_common.yaml
#### DIAGNOSTICS Sensors ####
diag_basic: !include common/include_basic_diag_sensors.yaml
diag_more: !include common/include_more_diag_sensors.yaml
#diag_debug: !include common/include_debug_diag_sensors.yaml
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
#:########################################################################################:#
# ESPHOME:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}" # Appears on the esphome page in HA
area: "${device_area}"
project:
name: "${project_name}"
version: "${project_version}"
on_boot:
priority: 200
then:
- switch.turn_on: Relay_2 # Permanently on
#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK:
# https://esphome.io/components/esp8266.html
#:########################################################################################:#
esp8266:
board: esp01_1m
early_pin_init: false # Recommended false where switches are involved. Defaults to true.
board_flash_mode: dout # Default is dout
#:########################################################################################:#
# LOGGING:
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
level: "${log_level}"
#baud_rate: 0
#:########################################################################################:#
# STATUS LED:
# https://esphome.io/components/status_led.html
#:########################################################################################:#
status_led:
pin:
number: GPIO2
inverted: true
#:########################################################################################:#
# BINARY SENSORS:
# https://esphome.io/components/binary_sensor/
#:########################################################################################:#
binary_sensor:
- platform: gpio
pin:
number: GPIO16
mode: INPUT
inverted: true
use_interrupt: false # GPIO16 pin doesn't support interrupts so use polling. Only suppresses a warning.
name: "Button 1: ${switch_1_name}"
on_press:
- switch.toggle: Relay_1
- platform: gpio
pin:
number: GPIO05
mode: INPUT
inverted: true
name: "Button 2: ${switch_2_name}"
#on_press:
# - switch.toggle: Relay_2
# KS-811-2 is a double only
#- platform: gpio
# pin:
# number: GPIO4
# mode: INPUT
# inverted: true
# name: "Button 3: ${switch_3_name}"
# on_press:
# - switch.toggle: Relay_3
#:########################################################################################:#
# SWITCH COMPONENT:
# https://esphome.io/components/switch/
#:########################################################################################:#
switch:
- platform: gpio
name: "Relay 1: ${switch_1_name}"
pin: GPIO13
id: Relay_1
- platform: gpio
name: "Relay 2: ${switch_2_name}"
pin: GPIO12
id: Relay_2
# KS-811-2 is a double only
#- platform: gpio
# name: "Relay 3: ${switch_3_name}"
# pin: GPIO14
# id: Relay_3
Reference in New Issue View Git Blame Copy Permalink