zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
02f3e44248c3de5c7bb305b3b6cdd7a2c87818c0
zorruno-homeassistant/esphome/esp-bedrm3lights.yaml
T

291 lines
12 KiB
YAML
Raw Blame History

#:########################################################################################:#
# TITLE: BEDROOM 3 LIGHTSWITCH
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-bedrm3lights.yaml
#:########################################################################################:#
# VERSIONS:
# V3.6 2026-03-05 Updated yaml to zorruno layout V1.1
# V3.5 2025-07-24 YAML tidyups
#:########################################################################################:#
# HARDWARE:
# - Zemismart KS-811 Double push button (KS-811-2)
# pinout/schematic: https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
#:########################################################################################:#
# OPERATION NOTES:
# - Virtual 2-button wall switch used to control Bedroom 3 ceiling fan light and to force "all off"
# - Button 1 toggles the iFan02 light (sends MQTT ON/OFF), using Relay 1 as the local state mirror
# - Button 2 forces "All Lights Off" (turns iFan02 light OFF and sets fan speed to 0), and turns Relay 2 OFF
# - Relay 1 and Relay 2 are used as local state indicators (no load connected)
# - A short cooldown is used on Button 1 to prevent repeated MQTT publishes
#:########################################################################################:#
# MQTT COMMANDS:
# Remote fan light command:
# ${mqtt_remote_device_command_topic1} -> ON,OFF
# Remote fan speed command (used by All Off):
# ${mqtt_remote_device_command_topic2} -> 0
#
# Remote fan light status (subscribed to keep Relay 1 in sync):
# ${mqtt_remote_status_topic1} -> ON,OFF
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant OFFLINE, but Network and MQTT ONLINE
# - Buttons still publish MQTT commands directly to the remote iFan02 (light and all-off actions)
# - Relay 1 state mirror still updates from subscribed remote light status topic
# b) MQTT OFFLINE (but WiFi/Network and HA API ONLINE)
# - Buttons cannot control the remote iFan02 (control path is MQTT)
# - Relay 1 will not mirror the remote light status while MQTT is down
# c) Entire WiFi/Network OFFLINE
# - No MQTT publish/subscribe and no HA API connectivity
# - Buttons will not control the remote iFan02
# - Local indicator relays remain in their last state until connectivity returns (or reboot)
# - Accurate time is NOT needed (SNTP not required) for core operation
#:########################################################################################:#
#:########################################################################################:#
# SUBSTITUTIONS: Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
# Device Naming
device_name: "esp-bedrm3lights"
friendly_name: "Bedroom 3 Lightswitch (2)"
description_comment: "Bedroom 3 Main Lightswitch using a Zemismart KS-811 Double Push Button. Main Lights (1-Virtual), All Lights Off (2-Virtual) (Layout V1.1)"
device_area: "Bedroom 3" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "Zemismart Technologies.KS-811 Double" # Project Details
project_version: "v3.6" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
# Passwords and Secrets
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
static_ip_address: !secret esp-bedrm3lights_ip
mqtt_local_command_main_topic: !secret mqtt_command_main_topic
mqtt_local_status_main_topic: !secret mqtt_status_main_topic
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
# Don't forget to switch it back when changed.
current_ip_address: ${static_ip_address}
# Device Settings
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for general sensors etc
# MQTT LOCAL Controls
mqtt_device_name: "bedroom3-lightswitch"
# MQTT REMOTE Controls (Bedroom 3 iFan02)
mqtt_remote_device_name: "bedroom3-ceilingfan"
# Remote Light
mqtt_remote_device_command_topic1: "${mqtt_local_command_main_topic}/${mqtt_remote_device_name}/light/set"
mqtt_remote_status_topic1: "${mqtt_local_status_main_topic}/${mqtt_remote_device_name}/light/state"
mqtt_remote_device_command_ON: "ON"
mqtt_remote_device_command_OFF: "OFF"
# Remote Fan Speed (used for All Off)
mqtt_remote_device_command_topic2: "${mqtt_local_command_main_topic}/${mqtt_remote_device_name}/speed/set"
mqtt_remote_device_command_0: "0"
# Switch Naming
switch_1_name: "Main Lights" # Nothing physically connected to this output (ifan02 light is the real load)
switch_2_name: "All Lights Off" # Nothing physically connected to this output
#:########################################################################################:#
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
local_current_ip_address: "${current_ip_address}"
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
common_api: !include
file: common/api_common.yaml
#file: common/api_common_noencryption.yaml
vars:
local_api_key: "${api_key}"
#### MQTT ####
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
#### WEB PORTAL ####
#common_webportal: !include common/webportal_common.yaml
#### SNTP (Only use if you want/need accurate timeclocks) ####
common_sntp: !include common/sntp_common.yaml
#### DIAGNOSTICS Sensors ####
diag_basic: !include common/include_basic_diag_sensors.yaml
diag_more: !include common/include_more_diag_sensors.yaml
diag_debug: !include common/include_debug_diag_sensors.yaml
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
#:########################################################################################:#
# ESPHOME:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}" # Appears on the ESPHome page in HA
area: "${device_area}"
project:
name: "${project_name}"
version: "${project_version}"
#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK:
# https://esphome.io/components/esp8266/
#:########################################################################################:#
esp8266:
board: esp01_1m
early_pin_init: false # Recommended false where switches are involved. Defaults to true.
board_flash_mode: dout # Default is dout
#:########################################################################################:#
# LOGGING: ESPHome Logging Enable
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
level: "${log_level}" # INFO suggested, or DEBUG for testing
#baud_rate: 0 # set to 0 for no logging via UART, needed if using UART for other serial devices
#esp8266_store_log_strings_in_flash: false
#tx_buffer_size: 64
#:########################################################################################:#
# GLOBAL VARIABLES:
# https://esphome.io/guides/automations.html#global-variables
#:########################################################################################:#
globals:
- id: btn1_last_ms
type: uint32_t
restore_value: false
initial_value: "0"
#:########################################################################################:#
# STATUS LED:
# https://esphome.io/components/status_led.html
#:########################################################################################:#
status_led:
pin:
number: GPIO2
inverted: true
#:########################################################################################:#
# BINARY SENSORS:
# https://esphome.io/components/binary_sensor/
# Buttons for KS-811-2 are GPIO16, GPIO5
#:########################################################################################:#
binary_sensor:
- platform: gpio
id: button_1
pin:
number: GPIO16
mode:
input: true
pullup: false # set to true if you need an internal pull-up
inverted: true
use_interrupt: false # GPIO16 does not support interrupts so use polling (suppresses warning).
name: "Button 1: ${switch_1_name}"
filters:
- delayed_on: 30ms
- delayed_off: 30ms
on_press:
# Cooldown: 250ms between publishes
- if:
condition:
lambda: |-
return (millis() - id(btn1_last_ms)) > 250;
then:
- lambda: |-
id(btn1_last_ms) = millis();
- if:
condition:
switch.is_on: Relay_1
then:
- mqtt.publish:
topic: "${mqtt_remote_device_command_topic1}"
payload: "${mqtt_remote_device_command_OFF}"
qos: 0
retain: false
else:
- mqtt.publish:
topic: "${mqtt_remote_device_command_topic1}"
payload: "${mqtt_remote_device_command_ON}"
qos: 0
retain: false
- platform: gpio
id: button_2
pin:
number: GPIO05
mode: INPUT
inverted: true
name: "Button 2: ${switch_2_name}"
on_press:
- switch.turn_off: Relay_2
- mqtt.publish:
topic: "${mqtt_remote_device_command_topic1}"
payload: "${mqtt_remote_device_command_OFF}"
qos: 0
retain: false
- mqtt.publish:
topic: "${mqtt_remote_device_command_topic2}"
payload: "${mqtt_remote_device_command_0}"
qos: 0
retain: false
#:########################################################################################:#
# SWITCH COMPONENT:
# https://esphome.io/components/switch/
# Relays for KS-811-2 are GPIO13, GPIO12 (no load connected; used as indicators)
#:########################################################################################:#
switch:
- platform: gpio
name: "Relay 1: ${switch_1_name}"
pin: GPIO13
id: Relay_1
- platform: gpio
name: "Relay 2: ${switch_2_name}"
pin: GPIO12
id: Relay_2
#:########################################################################################:#
# MQTT:
# This adds device-specific MQTT command triggers to the common MQTT configuration.
#:########################################################################################:#
mqtt:
on_message:
# Mirror remote light state onto Relay 1 indicator
- topic: "${mqtt_remote_status_topic1}"
payload: "${mqtt_remote_device_command_ON}"
then:
- switch.turn_on: Relay_1
- topic: "${mqtt_remote_status_topic1}"
payload: "${mqtt_remote_device_command_OFF}"
then:
- switch.turn_off: Relay_1
Reference in New Issue View Git Blame Copy Permalink