zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
79054490d028b485042d11ba67673a58e2d4bc1b
zorruno-homeassistant/esphome/esp-rocktumbler.yaml
T
root a8d2927274 yaml layout updates to v1.x
2026-02-25 21:05:21 +13:00

213 lines
8.5 KiB
YAML
Raw Blame History

#:########################################################################################:#
# TITLE: ROCK TUMBLER POWER MONITOR
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-rocktumbler.yaml
#:########################################################################################:#
# VERSIONS:
# V1.4 2026-02-25 Updated yaml to zorruno layout V1.1
# V1.3 2025-08-27 Changed to Athom V2
# V1.2 2025-06-15 Changed to Athom V1
# V1.1 2025-06-12 Tidyups and packages added
#:########################################################################################:#
# HARDWARE:
# - Athom Smart Plug V2 (ESP8285) with power monitoring + relay
# - Reference config: github://athom-tech/athom-configs/athom-smart-plug.yaml
#:########################################################################################:#
# OPERATION NOTES:
# - This device provides power monitoring (via common Athom V2 package) and a controllable relay.
# - "Power On State" select controls what the relay does after reboot:
# - Always Off
# - Always On
# - Restore Previous State
# - Power monitoring sensor update interval is set via substitutions.
#:########################################################################################:#
# MQTT COMMANDS:
# - None device-specific in this YAML (uses common_mqtt package for standard device MQTT support).
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant OFFLINE, but Network and MQTT ONLINE
# - Device continues operating and can be controlled via MQTT (if your common_mqtt exposes it).
# - Power monitoring continues locally and publishes via MQTT if configured.
# b) MQTT OFFLINE (but WiFi/Network and HA API ONLINE)
# - Device remains controllable via Home Assistant API.
# - MQTT publishing/commands will fail while MQTT is down.
# c) Entire WiFi/Network OFFLINE
# - Device continues operating locally (relay + power monitoring).
# - SNTP is not needed (no timeclocks used in this YAML).
#:########################################################################################:#
#:########################################################################################:#
# SUBSTITUTIONS: Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
# Device Naming
device_name: "esp-rocktumbler"
friendly_name: "Rock Tumbler Power"
description_comment: "Rock Tumbler Power :: Athom Smart Plug Power V2 (Layout V1.1)"
device_area: "Laundry" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "Athom Technology.Smart Plug V2"
project_version: "v1.4" # Updated yaml to zorruno layout V1.1
# Passwords (unfortunately you cannot use substitutions inside secrets names)
api_key: !secret esp-api_key
ota_pass: !secret esp-ota_pass
static_ip_address: !secret esp-rocktumbler_ip
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
# Don't forget to switch it back when changed.
current_ip_address: ${static_ip_address}
# Device General Settings
log_level: "NONE" # NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for for general sensors etc
# Device Specific Settings (Athom Power Monitor Plug V2)
relay_icon: "mdi:power-socket-au"
current_limit: "10" # Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
sensor_update_interval: "10s"
relay_restore_mode: RESTORE_DEFAULT_ON
hide_energy_sensor: "true"
#:########################################################################################:#
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
local_current_ip_address: "${current_ip_address}"
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
common_api: !include
file: common/api_common.yaml
#file: common/api_common_noencryption.yaml
vars:
local_api_key: "${api_key}"
#### MQTT ####
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
#### WEB PORTAL ####
#common_webportal: !include common/webportal_common.yaml
#### SNTP (Only use if you want/need accurate timeclocks) ####
common_sntp: !include common/sntp_common.yaml
#### DIAGNOSTICS Sensors ####
diag_basic: !include common/include_basic_diag_sensors.yaml
diag_more: !include common/include_more_diag_sensors.yaml
#diag_debug: !include common/include_debug_diag_sensors.yaml
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
#### Device Specific included packages: Athom Power Monitor Plug V2 ####
common_athompowermonV2: !include
file: common/athompowermonv2_common.yaml
vars:
local_friendly_name: "${friendly_name}"
local_current_limit: "${current_limit}"
sensor_update_interval: "${sensor_update_interval}"
relay_restore_mode: "${relay_restore_mode}"
power_plug_type: "${relay_icon}"
hide_energy_sensor: "${hide_energy_sensor}"
#:########################################################################################:#
# ESPHOME:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}" # Appears on the esphome page in HA
area: "${device_area}"
name_add_mac_suffix: false
min_version: 2024.6.0
project:
name: "${project_name}"
version: "${project_version}"
on_boot:
priority: 600
then:
- select.set_index:
id: power_mode
index: !lambda |-
return id(restore_mode) - 1;
- lambda: |-
switch (id(restore_mode)) {
case 1: {
id(relay).turn_off();
break;
}
case 2: {
id(relay).turn_on();
break;
}
default: {
break;
}
}
#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK:
# https://esphome.io/components/esp8266/
#:########################################################################################:#
esp8266:
board: esp8285
restore_from_flash: true # mainly for calculating cumulative energy, but not that important here
early_pin_init: true
preferences:
flash_write_interval: 5min
mdns:
disabled: false
#:########################################################################################:#
# LOGGING: ESPHome Logging Enable
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
level: "${log_level}"
baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
#:########################################################################################:#
# GLOBAL VARIABLES:
# https://esphome.io/guides/automations.html#global-variables
#:########################################################################################:#
globals:
# 0 = Always_Off, 1 = Restore_Power_Off, 2 = Always_On
- id: restore_mode
type: int
restore_value: yes
initial_value: "2"
#:########################################################################################:#
# SELECT COMPONENT:
# https://esphome.io/components/select/index.html
#:########################################################################################:#
select:
- platform: template
name: "Power On State"
id: power_mode
optimistic: true
icon: mdi:electric-switch
options:
- "Always Off"
- "Always On"
- "Restore Previous State"
on_value:
then:
- lambda: |-
id(restore_mode) = i + 1;
Reference in New Issue View Git Blame Copy Permalink