zorruno-homeassistant/esphome/esp-rgblampbulb2.yaml

##########################################################################################
##########################################################################################
# LB01 Athom 15W RGBCCT Bulb (ESP8266) - ESPHome
#
# V1.0 2025-09-09 Initial Version (Tasmota pinout import)
#
# Based on Tasmota template in screenshot:
#   GPIO4  -> PWM 1
#   GPIO5  -> PWM 4
#   GPIO12 -> PWM 2
#   GPIO13 -> PWM_i 5 (inverted)
#   GPIO14 -> PWM 3
#
# Assumed channel roles (adjust if colors are swapped on test):
#   PWM1 = Red, PWM2 = Green, PWM3 = Blue,
#   PWM4 = Cold White, PWM5 = Warm White (inverted)
##########################################################################################
##########################################################################################


##########################################################################################
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
##########################################################################################
substitutions:
  # Device Naming
  device_name: esp-rgblampbulb2
  friendly_name: "Athom LB01 15W RGBCCT Bulb"
  description_comment: "Athom RGBCCT bulb using Tasmota pin mapping"
  device_area: "Bedroom 3" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.  

  # Passwords   If NOT using a secrets file, just replace these with the passwords etc (in quotes)
  api_key: !secret esp-api_key
  ota_pass: !secret esp-ota_pass
  static_ip_address: !secret esp-rgblampbulb2_ip

  # Preferred warm color temperature (use K or mireds, e.g. "2700K" or "370 mireds")
  white_temp: "3000K"

  # Device Settings
  log_level: "INFO"      # NONE, ERROR, WARN, INFO, DEBUG, VERBOSE, VERY_VERBOSE
  update_interval: "60s" # general sensors update

  # Effect timing defaults
  on_time_ms: "500ms"
  off_time_ms: "500ms"

  # >>> PWM frequency for all channels (easy to adjust in one place) <<<
  pwm_freq: "2000 Hz"

  # >>> ESPHome equivalent of Tasmota DimmerRange 24,100 <<<
  # 0.24 = 24% minimum PWM when the light is ON. OFF still goes to 0.
  dimmer_min_power: "0.24"


##########################################################################################
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
##########################################################################################
# Comment some of these out where not needed, eg MQTT, Web portal, SNTP, General Sensors
##########################################################################################
packages:
  common_wifi: !include
    file: common/network_common.yaml
    vars:
      local_device_name: "${device_name}"
      local_static_ip_address: "${static_ip_address}"
      local_ota_pass: "${ota_pass}"
  common_api: !include
    file: common/api_common.yaml
    vars:
      local_api_key: "${api_key}"
  #common_webportal: !include
  #  file: common/webportal_common.yaml
  common_mqtt: !include
    file: common/mqtt_common.yaml
    vars:
      local_device_name: "${device_name}"
  common_sntp: !include
    file: common/sntp_common.yaml
  common_general_sensors: !include
    file: common/sensors_common.yaml
    vars:
      local_friendly_name: "${friendly_name}"
      local_update_interval: "${update_interval}"


#########################################################################################
# ESPHome
# https://esphome.io/components/esphome.html
#########################################################################################
esphome:
  name: ${device_name}
  friendly_name: ${friendly_name}
  comment: ${description_comment} # appears on the esphome page in HA
  on_boot:
    # Run late so it wins over everything (Wi-Fi, light init, restore, etc.)
    priority: -10
    then:
      - delay: 100ms
      - lambda: |-
          // Force WHITE mode @ 60% and 3000K (333 mireds) with no fade
          auto call = id(my_light).turn_on();
          call.set_color_mode(ColorMode::WHITE);
          call.set_brightness(0.60f);
          call.set_color_temperature(333.0f);  // 3000 K
          call.set_transition_length(0);
          call.perform();
# Optional project metadata and 2MB flash map (uncomment if you confirm ESP8285 2MB)
  project:
    name: "China Athom Technology.Athom RGBCCT Bulb"
    version: "v1.1.4"
  platformio_options:
    board_upload.flash_size: 2MB
    board_upload.maximum_size: 2097152
    board_build.ldscript: eagle.flash.2m.ld

#########################################################################################
# ESP Platform and Framework
# https://esphome.io/components/esp8266.html
#########################################################################################
esp8266:
  board: esp8285
  early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
  board_flash_mode: dout # Default is dout
  #restore_from_flash: true # restore some values on reboot

mdns:
  disabled: false # Disabling will make the build file smaller (and it is still available via static IP)

#preferences:
  #flash_write_interval: 2s



#########################################################################################    
# ESPHome Logging Enable
# https://esphome.io/components/logger.html
#########################################################################################  
logger:
  level: ${log_level}
  #baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
  #esp8266_store_log_strings_in_flash: false
  #tx_buffer_size: 64


##########################################################################################
# OUTPUT COMPONENT
##########################################################################################
output:
  - platform: esp8266_pwm
    id: output_red           # PWM1 -> GPIO4
    pin: GPIO4
    frequency: ${pwm_freq}
    min_power: 0.000499
    max_power: 1
    zero_means_zero: true

  - platform: esp8266_pwm
    id: output_green         # PWM2 -> GPIO12
    pin: GPIO12
    frequency: ${pwm_freq}
    min_power: 0.000499
    max_power: 1
    zero_means_zero: true

  - platform: esp8266_pwm
    id: output_blue          # PWM3 -> GPIO14
    pin: GPIO14
    frequency: ${pwm_freq}
    min_power: 0.000499
    max_power: 1
    zero_means_zero: true

  - platform: esp8266_pwm
    id: output_cold_white    # PWM4 -> GPIO5
    pin: GPIO5
    frequency: ${pwm_freq}
    min_power: 0.01
    max_power: 0.9
    zero_means_zero: true

  - platform: esp8266_pwm
    id: output_warm_white    # PWM5 -> GPIO13 (inverted)
    pin: GPIO13
    frequency: ${pwm_freq}
    inverted: true
    min_power: 0.01
    max_power: 0.9
    zero_means_zero: true

##########################################################################################
# DIAGNOSTIC BUTTONS: Force individual channels (bypass light logic)
##########################################################################################
##########################################################################################
# DIAGNOSTIC BUTTONS (use light API, not raw PWMs)
##########################################################################################
button:
  - platform: template
    name: "Test WW 100%"
    on_press:
      then:
        - light.turn_on:
            id: my_light
            brightness: 100%
            color_temperature: 3000 K
            transition_length: 0s

  - platform: template
    name: "Test CW 100%"
    on_press:
      then:
        - light.turn_on:
            id: my_light
            brightness: 100%
            color_temperature: 6000 K
            transition_length: 0s

  - platform: template
    name: "All OFF (light)"
    on_press:
      then:
        - light.turn_off:
            id: my_light
            transition_length: 0s



##########################################################################################
# LIGHT COMPONENT
# https://esphome.io/components/light/
##########################################################################################
light:
  - platform: rgbct
    id: my_light
    name: ${friendly_name}
    restore_mode: RESTORE_DEFAULT_OFF 
    red: output_red
    green: output_green
    blue: output_blue
    white_brightness: output_cold_white   # GPIO5
    color_temperature: output_warm_white  # GPIO13 (inverted)

    # Keep total output reasonable on 15W bulbs and avoid mixing RGB with WW simultaneously.
    color_interlock: true

    # Typical white temperature mapping for RGBWW
    cold_white_color_temperature: 6000 K
    warm_white_color_temperature: 3000 K

    # Do NOT restore last color at boot; on_boot shapes warm 60% only after power loss
#    restore_mode: RESTORE_DEFAULT_OFF

    # Optional: small gamma tweak for nicer dimming curves
#    gamma_correct: 2.4

    # Default fade for normal changes; boot uses its own 3s transition above.
    default_transition_length: 1s

    ######################################################################################
    # CALM EFFECTS
    # - Night Light: steady warm, ~3% brightness
    # - Breathe (Soft): slow, gentle brightness wave on current color
    # - Amber Glow: very gentle warm amber wave
    # - Blue Calm: subtle cool blue drift
    # - Warm Dim: static warm preset around 15%
    ######################################################################################
    effects:
      # Night Light (steady warm ~3%)
      - lambda:
          name: "Night Light"
          update_interval: 2s
          lambda: |-
            auto call = id(my_light).turn_on();
            call.set_color_mode(ColorMode::WHITE);
            call.set_brightness(0.03f);
            call.set_color_temperature(333.0f); // ~3000K
            call.set_transition_length(1000);
            call.perform();

      # Breathe (Soft) — gentle pulse on the current color
      - pulse:
          name: "Breathe (Soft)"
          transition_length: 3s
          update_interval: 3s
          min_brightness: 5%
          max_brightness: 35%

      # Amber Glow — very gentle warm wave (8–20%)
      - lambda:
          name: "Amber Glow"
          update_interval: 500ms
          lambda: |-
            static float t = 0.0f;
            t += 0.5f;  // seconds step (approx)
            float phase = (sinf(t * 2.0f * (3.14159f/16.0f)) + 1.0f) / 2.0f; // ~16s cycle
            float b = 0.08f + phase * 0.12f; // 8%..20%
            auto call = id(my_light).turn_on();
            call.set_color_mode(ColorMode::WHITE);
            call.set_brightness(b);
            call.set_color_temperature(333.0f);  // 3000K
            call.set_transition_length(800);
            call.perform();

      # Pastel Cycle — very slow, soft rainbow (~12–20% brightness)
      - lambda:
          name: "Pastel Cycle"
          update_interval: 1000ms
          lambda: |-
            static float t = 0.0f;
            t += 1.0f;                      // seconds
            const float period = 120.0f;    // 120s full cycle
            float w = 2.0f * 3.14159f / period;
            // Three sine waves 120° apart for a pastel rainbow
            float r = 0.35f + 0.25f * sinf(w * t + 0.0f);
            float g = 0.35f + 0.25f * sinf(w * t + 2.094f);
            float b = 0.35f + 0.25f * sinf(w * t + 4.188f);
            auto call = id(my_light).turn_on();
            call.set_color_mode(ColorMode::RGB);
            call.set_brightness(0.18f);
            call.set_rgb(r, g, b);
            call.set_transition_length(1200);
            call.perform();

      # Ocean Fade — teal↔blue drift (~10–18% brightness)
      - lambda:
          name: "Ocean Fade"
          update_interval: 1200ms
          lambda: |-
            static float t = 0.0f;
            t += 1.2f;
            float phase = (sinf(t * 2.0f * (3.14159f/36.0f)) + 1.0f) / 2.0f; // ~36s cycle
            // Lerp between teal (0.0,0.6,0.6) and blue (0.25,0.45,1.0)
            float r = (1.0f - phase) * 0.00f + phase * 0.25f;
            float g = (1.0f - phase) * 0.60f + phase * 0.45f;
            float b = (1.0f - phase) * 0.60f + phase * 1.00f;
            auto call = id(my_light).turn_on();
            call.set_color_mode(ColorMode::RGB);
            call.set_brightness(0.16f);
            call.set_rgb(r, g, b);
            call.set_transition_length(1400);
            call.perform();

      # Sunset Drift — peach↔soft amber (~12–22% brightness)
      - lambda:
          name: "Sunset Drift"
          update_interval: 1000ms
          lambda: |-
            static float t = 0.0f;
            t += 1.0f;
            float phase = (sinf(t * 2.0f * (3.14159f/40.0f)) + 1.0f) / 2.0f; // ~40s
            // Peach (1.0,0.65,0.50) to Amber (1.0,0.75,0.30)
            float r = 1.00f;
            float g = (1.0f - phase) * 0.65f + phase * 0.75f;
            float b = (1.0f - phase) * 0.50f + phase * 0.30f;
            auto call = id(my_light).turn_on();
            call.set_color_mode(ColorMode::RGB);
            call.set_brightness(0.20f);
            call.set_rgb(r, g, b);
            call.set_transition_length(1200);
            call.perform();

      # Lavender Breeze — lavender↔rose (~10–18% brightness)
      - lambda:
          name: "Lavender Breeze"
          update_interval: 1200ms
          lambda: |-
            static float t = 0.0f;
            t += 1.2f;
            float phase = (sinf(t * 2.0f * (3.14159f/48.0f)) + 1.0f) / 2.0f; // ~48s
            // Lavender (0.70,0.55,1.00) to Rose (1.00,0.60,0.85)
            float r = (1.0f - phase) * 0.70f + phase * 1.00f;
            float g = (1.0f - phase) * 0.55f + phase * 0.60f;
            float b = (1.0f - phase) * 1.00f + phase * 0.85f;
            auto call = id(my_light).turn_on();
            call.set_color_mode(ColorMode::RGB);
            call.set_brightness(0.15f);
            call.set_rgb(r, g, b);
            call.set_transition_length(1400);
            call.perform();

      # Forest Calm — moss↔mint (~8–16% brightness)
      - lambda:
          name: "Forest Calm"
          update_interval: 1000ms
          lambda: |-
            static float t = 0.0f;
            t += 1.0f;
            float phase = (sinf(t * 2.0f * (3.14159f/44.0f)) + 1.0f) / 2.0f; // ~44s
            // Moss (0.25,0.55,0.25) to Mint (0.50,0.95,0.65)
            float r = (1.0f - phase) * 0.25f + phase * 0.50f;
            float g = (1.0f - phase) * 0.55f + phase * 0.95f;
            float b = (1.0f - phase) * 0.25f + phase * 0.65f;
            auto call = id(my_light).turn_on();
            call.set_color_mode(ColorMode::RGB);
            call.set_brightness(0.14f);
            call.set_rgb(r, g, b);
            call.set_transition_length(1200);
            call.perform();

      # Blue Calm — soft cool tint, tiny drift (6–14%)
      - lambda:
          name: "Blue Calm"
          update_interval: 1000ms
          lambda: |-
            static float t = 0.0f;
            t += 1.0f;
            float phase = (sinf(t * 2.0f * (3.14159f/20.0f)) + 1.0f) / 2.0f; // ~20s cycle
            float b = 0.06f + phase * 0.08f; // 6%..14%
            auto call = id(my_light).turn_on();
            call.set_color_mode(ColorMode::RGB);
            call.set_brightness(b);
            call.set_rgb(0.45f, 0.55f, 1.00f); // gentle cool bluish tint
            call.set_transition_length(1200);
            call.perform();

      # Warm Dim — static warm preset (~15%)
      - lambda:
          name: "Warm Dim"
          update_interval: 5s
          lambda: |-
            auto call = id(my_light).turn_on();
            call.set_color_mode(ColorMode::WHITE);
            call.set_brightness(0.15f);
            call.set_color_temperature(333.0f); // ~3000K
            call.set_transition_length(800);
            call.perform();