zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
c11728dba64eead6068bad9f199f7f268f28c8e8
zorruno-homeassistant/esphome/esp-loungepelmetleds2.yaml
T
root f7bfa78835 more esphome devices and fixes
2026-04-03 21:34:23 +13:00

1231 lines
42 KiB
YAML
Raw Blame History

#:########################################################################################:#
# TITLE: LOUNGE - PELMET LEDS (H801, 2x Monochrome PWM)
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-loungepelmetleds2.yaml
#:########################################################################################:#
# VERSIONS:
# V2.8 2026-03-11 Updated yaml to zorruno layout V1.1
# V2.7 2025-09-30 A bunch of fixes for final version
# V2.0 2025-09-30 Based on single MOSFET version; adapted to H801 dual-monochrome (A/B)
# V1.x History from single-channel base maintained in prior comments
#:########################################################################################:#
# HARDWARE:
# - H801 (ESP8266, 5 MOSFET outputs)
# - Used here as 2 independent monochrome PWM channels (A and B)
# - Reference hardware:
# https://devices.esphome.io/devices/Sinilink-XY-WFMS
# - Device GPIO as used here:
# - GPIO02 Blue status LED, active-low (ESPHome status)
# - GPIO15 MOSFET output A (PWM)
# - GPIO13 MOSFET output B (PWM)
# - GPIO05 Red LED (used to display status for Channel A)
# - GPIO01 Green LED (used to display status for Channel B) [UART TX, logger baud=0]
#:########################################################################################:#
# OPERATION NOTES:
# - General-purpose LED controller using an H801 board.
# - Designed for 2 independent monochrome outputs:
# - Channel A
# - Channel B
# - Minimum and maximum output limits are defined in SUBSTITUTIONS per channel.
# - Minimum output allows the light to switch fully OFF at or below the threshold to avoid low-PWM flicker.
# - PWM frequency is set in SUBSTITUTIONS.
# - Restart behaviours:
# - Fade up to full
# - Restore Brightness
# - Remain Off
# - Fade timing scales with the configured values.
# - Exposed in Home Assistant for both A and B:
# - Restart action
# - Fade Up-Down switch
# - Fade up/down times
# - Output percentage
# - Output Set slider
# - Shared maximum ON time
# - Fade Up-Down switch auto-syncs to brightness thresholds and does not itself trigger a ramp during sync.
# - This yaml currently uses Home Assistant API and diagnostics packages.
# - MQTT and SNTP packages are currently disabled in this file.
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant offline (network online):
# - Device continues to run its local light logic and stored restart behaviour.
# - Existing light states, watchdog timers, and fades continue locally.
# - No Home Assistant control is available until API connectivity returns.
#
# b) MQTT offline (or HA/MQTT offline):
# - MQTT is not enabled in this yaml, so MQTT offline has no direct effect on device logic.
# - If Home Assistant/API is also offline, control from HA is unavailable.
#
# c) Entire WiFi/Network offline:
# - Device continues to run its local light logic and stored restart behaviour.
# - No HA or MQTT control is available.
# - Accurate time is not needed; SNTP is not required for operation.
#:########################################################################################:#
#:########################################################################################:#
# SUBSTITUTIONS:
# Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
# Device Naming
device_name: "esp-loungepelmetleds2" # yaml file should be device_name.yaml
friendly_name: "Lounge Pelmet LEDs"
description_comment: "Lounge Pelmet LEDs :: H801 dual-channel monochrome (Layout V1.1)"
device_area: "Lounge" # Allows the ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "H801.5xMOSFET" # Manufacturer before the dot, device after the dot.
project_version: "v2.8" # Project version denotes release of the YAML file
# Passwords & Secrets (Unfortunately, you can't use substitutions inside secret names)
api_key: !secret esp-api_key
ota_pass: !secret esp-ota_pass
static_ip_address: !secret esp-loungepelmetleds2_ip
current_ip_address: ${static_ip_address}
# Device Specific Settings (shared defaults applied per channel below)
log_level: "NONE" # Use INFO while testing; flip back to NONE later
update_interval: "60s"
led_gamma: "1.6"
pwm_frequency: "1000Hz"
max_on_default_hours: "24"
# Per-channel output caps (%), internal-only (no HA sliders)
minimum_led_output_A: "1"
maximum_led_output_A: "90"
minimum_led_output_B: "1"
maximum_led_output_B: "90"
# Device Specific GPIO
#device_status_led: GPIO5
device_mosfet_out_A: GPIO15
device_mosfet_out_B: GPIO13
device_fading_led_A: GPIO5
device_fading_led_B: GPIO1
#:########################################################################################:#
# PACKAGES:
# Included Common Packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_current_ip_address: "${current_ip_address}"
local_ota_pass: "${ota_pass}"
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
common_api: !include
#file: common/api_common.yaml
file: common/api_common_noencryption.yaml
vars:
local_api_key: "${api_key}"
#### MQTT ####
#common_mqtt: !include
# file: common/mqtt_common.yaml
# vars:
# local_device_name: "${device_name}"
#### WEB PORTAL ####
#common_webportal: !include common/webportal_common.yaml
#### SNTP (Only use if you want/need accurate timeclocks) ####
#common_sntp: !include common/sntp_common.yaml
#### DIAGNOSTICS Sensors ####
diag_basic: !include common/include_basic_diag_sensors.yaml
#diag_more: !include common/include_more_diag_sensors.yaml
#diag_debug: !include common/include_debug_diag_sensors.yaml
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
#:########################################################################################:#
# ESPHOME CORE CONFIGURATION:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}"
area: "${device_area}"
project:
name: "${project_name}"
version: "${project_version}"
on_boot:
priority: 200
then:
- lambda: |-
switch (id(restart_mode)) {
case 0: id(restart_action).publish_state("Fade up to full"); break;
case 1: id(restart_action).publish_state("Restore Brightness"); break;
case 2: default: id(restart_action).publish_state("Remain Off"); break;
}
- if:
condition:
lambda: 'return id(restart_mode) == 0;'
then:
- lambda: 'id(ramp_switch_target_on_A) = true;'
- lambda: 'id(ramp_switch_target_on_B) = true;'
- script.execute: ramp_on_script_A
- script.execute: ramp_on_script_B
- if:
condition:
lambda: 'return id(restart_mode) == 1;'
then:
- script.execute: deferred_restore_brightness_A
- script.execute: deferred_restore_brightness_B
- if:
condition:
lambda: 'return id(restart_mode) == 2;'
then:
- script.stop: ramp_on_script_A
- script.stop: ramp_off_script_A
- lambda: 'id(ramp_switch_target_on_A) = false;'
- light.turn_off:
id: mosfet_leds_A
transition_length: 0s
- script.stop: ramp_on_script_B
- script.stop: ramp_off_script_B
- lambda: 'id(ramp_switch_target_on_B) = false;'
- light.turn_off:
id: mosfet_leds_B
transition_length: 0s
- lambda: 'id(booting) = false;'
# Only if you want to play with build flags...
# platformio_options:
# build_unflags:
# - -flto
# build_flags:
# - -fno-lto
# - -Wl,--gc-sections
# - -ffunction-sections
# - -fdata-sections
# - -DNDEBUG
#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK:
# https://esphome.io/components/esp8266.html
# https://esphome.io/components/esp32.html
#:########################################################################################:#
esp8266:
board: esp01_1m
restore_from_flash: true
mdns:
disabled: true
preferences:
flash_write_interval: 5min
#:########################################################################################:#
# GLOBAL VARIABLES:
# https://esphome.io/components/globals.html
#:########################################################################################:#
globals:
# Per-channel brightness caps (internal; set via YAML substitutions)
- id: min_brightness_pct_A
type: int
restore_value: true
initial_value: "${minimum_led_output_A}"
- id: max_brightness_pct_A
type: int
restore_value: false
initial_value: "${maximum_led_output_A}"
- id: min_brightness_pct_B
type: int
restore_value: true
initial_value: "${minimum_led_output_B}"
- id: max_brightness_pct_B
type: int
restore_value: false
initial_value: "${maximum_led_output_B}"
# Max on hours (shared)
- id: max_on_hours
type: int
restore_value: true
initial_value: "${max_on_default_hours}"
# Per-channel Fade Up/Down times (seconds -> ms)
- id: ramp_up_ms_A
type: int
restore_value: true
initial_value: "5000"
- id: ramp_down_ms_A
type: int
restore_value: true
initial_value: "10000"
- id: ramp_up_ms_B
type: int
restore_value: true
initial_value: "5000"
- id: ramp_down_ms_B
type: int
restore_value: true
initial_value: "10000"
# Restart Action. (0=Fade full, 1=Restore brightness, 2=Remain off)
- id: restart_mode
type: int
restore_value: true
initial_value: "1" # align with select initial_option "Restore Brightness"
# Per-channel runtime state (A)
- id: ramp_switch_target_on_A
type: bool
restore_value: true
initial_value: "false"
- id: suppress_slider_sync_A
type: bool
restore_value: false
initial_value: "false"
- id: suppress_quick_on_A
type: bool
restore_value: false
initial_value: "false"
- id: last_brightness_pct_A
type: float
restore_value: true
initial_value: "0.0"
- id: last_set_pos_A
type: int
restore_value: false
initial_value: "-1"
- id: last_ramp_ms_A
type: uint32_t
restore_value: false
initial_value: "0"
- id: last_nonzero_brightness_pct_A
type: float
restore_value: true
initial_value: "0.0"
- id: restore_target_pct_A
type: float
restore_value: false
initial_value: "0.0"
- id: is_ramping_A
type: bool
restore_value: false
initial_value: "false"
- id: last_nonzero_tmp_A
type: float
restore_value: false
initial_value: "0.0"
- id: ramping_for_off_A
type: bool
restore_value: false
initial_value: "false"
# Per-channel runtime state (B)
- id: ramp_switch_target_on_B
type: bool
restore_value: true
initial_value: "false"
- id: suppress_slider_sync_B
type: bool
restore_value: false
initial_value: "false"
- id: suppress_quick_on_B
type: bool
restore_value: false
initial_value: "false"
- id: last_brightness_pct_B
type: float
restore_value: true
initial_value: "0.0"
- id: last_set_pos_B
type: int
restore_value: false
initial_value: "-1"
- id: last_ramp_ms_B
type: uint32_t
restore_value: false
initial_value: "0"
- id: last_nonzero_brightness_pct_B
type: float
restore_value: true
initial_value: "0.0"
- id: restore_target_pct_B
type: float
restore_value: false
initial_value: "0.0"
- id: is_ramping_B
type: bool
restore_value: false
initial_value: "false"
- id: last_nonzero_tmp_B
type: float
restore_value: false
initial_value: "0.0"
- id: ramping_for_off_B
type: bool
restore_value: false
initial_value: "false"
# Guard for startup behaviour
- id: booting
type: bool
restore_value: false
initial_value: "true"
# Compile time Gamma (cached; currently unused since PWM% sensors were removed)
- id: led_gamma_f
type: float
restore_value: false
initial_value: ${led_gamma}
#:########################################################################################:#
# LOGGER:
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
level: "${log_level}"
baud_rate: 0
#:########################################################################################:#
# STATUS LED:
# https://esphome.io/components/status_led.html
#:########################################################################################:#
#status_led:
# pin:
# number: ${device_status_led}
# inverted: true
#:########################################################################################:#
# MQTT COMMANDS:
#:########################################################################################:#
#mqtt:
# on_message handlers commented for efficiency. Uncomment if you need local MQTT control again.
# on_message:
# - topic: "${mqtt_local_command_topic_A}/lightA/set"
# payload: "${mqtt_local_device_command_ON}"
# then:
# - switch.turn_on: mosfet_ramp_switch_a
# - topic: "${mqtt_local_command_topic_A}/lightA/set"
# payload: "${mqtt_local_device_command_OFF}"
# then:
# - switch.turn_off: mosfet_ramp_switch_a
#
# - topic: "${mqtt_local_command_topic_B}/lightB/set"
# payload: "${mqtt_local_device_command_ON}"
# then:
# - switch.turn_on: mosfet_ramp_switch_b
# - topic: "${mqtt_local_command_topic_B}/lightB/set"
# payload: "${mqtt_local_device_command_OFF}"
# then:
# - switch.turn_off: mosfet_ramp_switch_b
#:########################################################################################:#
# SWITCH COMPONENT:
# https://esphome.io/components/switch/
#:########################################################################################:#
switch:
- platform: template
id: mosfet_ramp_switch_a
name: "${friendly_name} A Fade Up-Down"
icon: mdi:led-strip-variant
lambda: |-
return id(ramp_switch_target_on_A);
turn_on_action:
- lambda: |-
id(ramp_switch_target_on_A) = true;
- script.stop: ramp_off_script_A
- script.execute: ramp_on_script_A
turn_off_action:
- lambda: |-
id(ramp_switch_target_on_A) = false;
- script.stop: ramp_on_script_A
- script.execute: ramp_off_script_A
- platform: template
id: mosfet_ramp_switch_b
name: "${friendly_name} B Fade Up-Down"
icon: mdi:led-strip-variant
lambda: |-
return id(ramp_switch_target_on_B);
turn_on_action:
- lambda: |-
id(ramp_switch_target_on_B) = true;
- script.stop: ramp_off_script_B
- script.execute: ramp_on_script_B
turn_off_action:
- lambda: |-
id(ramp_switch_target_on_B) = false;
- script.stop: ramp_on_script_B
- script.execute: ramp_off_script_B
#:########################################################################################:#
# BUTTON COMPONENT:
# No standalone template button entities in this yaml
#:########################################################################################:#
#:########################################################################################:#
# SELECT COMPONENT:
# https://esphome.io/components/select/index.html
#:########################################################################################:#
select:
- platform: template
id: restart_action
name: "${friendly_name} Restart Action"
icon: mdi:restart
optimistic: true
options:
- "Fade up to full"
- "Restore Brightness"
- "Remain Off"
initial_option: "Restore Brightness"
set_action:
- lambda: |-
if (x == "Fade up to full") {
id(restart_mode) = 0;
} else if (x == "Restore Brightness") {
id(restart_mode) = 1;
} else {
id(restart_mode) = 2;
}
#:########################################################################################:#
# SENSOR COMPONENT:
# https://esphome.io/components/sensor/
#:########################################################################################:#
sensor:
# Channel A: Output % (pre-gamma)
- platform: template
id: mosfet_output_pct_A
name: "${friendly_name} A Output (%)"
unit_of_measurement: "%"
icon: mdi:percent
accuracy_decimals: 0
update_interval: 200ms
disabled_by_default: true
lambda: |-
const auto &cv = id(mosfet_leds_A).current_values;
return cv.is_on() ? (cv.get_brightness() * 100.0f) : 0.0f;
on_value:
then:
- lambda: |-
const auto &cv_now = id(mosfet_leds_A).current_values;
if (cv_now.is_on()) {
id(last_brightness_pct_A) = x;
if (x > 0.5f) {
if (!id(is_ramping_A)) id(last_nonzero_brightness_pct_A) = x;
id(last_nonzero_tmp_A) = x;
}
} else {
if (x > 0.5f) id(last_nonzero_tmp_A) = x;
}
if (!id(suppress_slider_sync_A)) {
float actual = x;
float minp = (float) id(min_brightness_pct_A);
float maxp = (float) id(max_brightness_pct_A);
if (maxp <= minp) maxp = minp + 1.0f;
float pos = (actual <= 0.0f) ? 0.0f : ((actual - minp) * 100.0f / (maxp - minp));
if (pos < 0.0f) pos = 0.0f;
if (pos > 100.0f) pos = 100.0f;
int pos_i = (int) floorf(pos + 0.5f);
if (pos_i != id(last_set_pos_A)) {
id(last_set_pos_A) = pos_i;
id(led_output_set_pct_A).publish_state(pos_i);
}
}
if (!id(booting) && !id(is_ramping_A)) {
float cap = (float) id(max_brightness_pct_A);
float low_th = cap * 0.33f;
float high_th = cap * 0.66f;
if (cv_now.is_on()) {
float b = x;
if (b < low_th - 0.25f) {
if (id(ramp_switch_target_on_A)) {
id(ramp_switch_target_on_A) = false;
id(mosfet_ramp_switch_a).publish_state(false);
}
} else if (b > high_th + 0.25f) {
if (!id(ramp_switch_target_on_A)) {
id(ramp_switch_target_on_A) = true;
id(mosfet_ramp_switch_a).publish_state(true);
}
}
}
}
# Channel B: Output % (pre-gamma)
- platform: template
id: mosfet_output_pct_B
name: "${friendly_name} B Output (%)"
unit_of_measurement: "%"
icon: mdi:percent
accuracy_decimals: 0
update_interval: 200ms
disabled_by_default: true
lambda: |-
const auto &cv = id(mosfet_leds_B).current_values;
return cv.is_on() ? (cv.get_brightness() * 100.0f) : 0.0f;
on_value:
then:
- lambda: |-
const auto &cv_now = id(mosfet_leds_B).current_values;
if (cv_now.is_on()) {
id(last_brightness_pct_B) = x;
if (x > 0.5f) {
if (!id(is_ramping_B)) id(last_nonzero_brightness_pct_B) = x;
id(last_nonzero_tmp_B) = x;
}
} else {
if (x > 0.5f) id(last_nonzero_tmp_B) = x;
}
if (!id(suppress_slider_sync_B)) {
float actual = x;
float minp = (float) id(min_brightness_pct_B);
float maxp = (float) id(max_brightness_pct_B);
if (maxp <= minp) maxp = minp + 1.0f;
float pos = (actual <= 0.0f) ? 0.0f : ((actual - minp) * 100.0f / (maxp - minp));
if (pos < 0.0f) pos = 0.0f;
if (pos > 100.0f) pos = 100.0f;
int pos_i = (int) floorf(pos + 0.5f);
if (pos_i != id(last_set_pos_B)) {
id(last_set_pos_B) = pos_i;
id(led_output_set_pct_B).publish_state(pos_i);
}
}
if (!id(booting) && !id(is_ramping_B)) {
float cap = (float) id(max_brightness_pct_B);
float low_th = cap * 0.33f;
float high_th = cap * 0.66f;
if (cv_now.is_on()) {
float b = x;
if (b < low_th - 0.25f) {
if (id(ramp_switch_target_on_B)) {
id(ramp_switch_target_on_B) = false;
id(mosfet_ramp_switch_b).publish_state(false);
}
} else if (b > high_th + 0.25f) {
if (!id(ramp_switch_target_on_B)) {
id(ramp_switch_target_on_B) = true;
id(mosfet_ramp_switch_b).publish_state(true);
}
}
}
}
#:########################################################################################:#
# OUTPUT COMPONENT:
# https://esphome.io/components/output/
#:########################################################################################:#
output:
- platform: esp8266_pwm
id: mosfet_pwm_A
pin: ${device_mosfet_out_A}
frequency: ${pwm_frequency}
- platform: esp8266_pwm
id: mosfet_pwm_B
pin: ${device_mosfet_out_B}
frequency: ${pwm_frequency}
- platform: gpio
id: fading_led_out_A
pin:
number: ${device_fading_led_A}
inverted: false
- platform: gpio
id: fading_led_out_B
pin:
number: ${device_fading_led_B}
inverted: false
#:########################################################################################:#
# LIGHT COMPONENT:
# https://esphome.io/components/light/
#:########################################################################################:#
light:
- platform: monochromatic
id: mosfet_leds_A
name: "${friendly_name} A"
output: mosfet_pwm_A
restore_mode: RESTORE_DEFAULT_OFF
default_transition_length: 250ms
icon: mdi:led-strip-variant
gamma_correct: "${led_gamma}"
on_turn_on:
- if:
condition:
lambda: 'return id(max_on_hours) > 0;'
then:
- script.stop: max_on_watchdog_A
- script.execute: max_on_watchdog_A
on_turn_off:
- if:
condition:
lambda: 'return !id(booting);'
then:
- script.stop: max_on_watchdog_A
- lambda: |-
id(last_brightness_pct_A) = 0.0f;
id(last_set_pos_A) = 0;
id(led_output_set_pct_A).publish_state(0);
on_state:
- lambda: |-
const auto &cv_s = id(mosfet_leds_A).current_values;
const bool is_on = cv_s.is_on() && (cv_s.get_brightness() > 0.0005f);
if (is_on) id(fading_led_out_A).turn_on();
else id(fading_led_out_A).turn_off();
- lambda: |-
const float cap = id(max_brightness_pct_A) / 100.0f;
const auto &cv = id(mosfet_leds_A).current_values;
if (!cv.is_on()) return;
const float b = cv.get_brightness();
if (b <= cap + 0.002f) return;
auto call = id(mosfet_leds_A).make_call();
call.set_state(true);
call.set_brightness(cap);
call.set_transition_length(0);
call.perform();
- platform: monochromatic
id: mosfet_leds_B
name: "${friendly_name} B"
output: mosfet_pwm_B
restore_mode: RESTORE_DEFAULT_OFF
default_transition_length: 250ms
icon: mdi:led-strip-variant
gamma_correct: "${led_gamma}"
on_turn_on:
- if:
condition:
lambda: 'return id(max_on_hours) > 0;'
then:
- script.stop: max_on_watchdog_B
- script.execute: max_on_watchdog_B
on_turn_off:
- if:
condition:
lambda: 'return !id(booting);'
then:
- script.stop: max_on_watchdog_B
- lambda: |-
id(last_brightness_pct_B) = 0.0f;
id(last_set_pos_B) = 0;
id(led_output_set_pct_B).publish_state(0);
on_state:
- lambda: |-
const auto &cv_s = id(mosfet_leds_B).current_values;
const bool is_on = cv_s.is_on() && (cv_s.get_brightness() > 0.0005f);
if (is_on) id(fading_led_out_B).turn_on();
else id(fading_led_out_B).turn_off();
- lambda: |-
const float cap = id(max_brightness_pct_B) / 100.0f;
const auto &cv = id(mosfet_leds_B).current_values;
if (!cv.is_on()) return;
const float b = cv.get_brightness();
if (b <= cap + 0.002f) return;
auto call = id(mosfet_leds_B).make_call();
call.set_state(true);
call.set_brightness(cap);
call.set_transition_length(0);
call.perform();
#:########################################################################################:#
# NUMBER COMPONENT:
# https://esphome.io/components/number/
#:########################################################################################:#
number:
- platform: template
id: cfg_ramp_up_s_A
name: "${friendly_name} A Fade Up Time (s)"
entity_category: config
unit_of_measurement: s
icon: mdi:timer-sand
mode: slider
min_value: 0
max_value: 60
step: 1
lambda: |-
return (float) id(ramp_up_ms_A) / 1000.0f;
set_action:
- lambda: |-
int secs = (int) floorf(x + 0.5f);
if (secs < 0) secs = 0;
if (secs > 60) secs = 60;
id(ramp_up_ms_A) = secs * 1000;
id(cfg_ramp_up_s_A).publish_state((float) secs);
- platform: template
id: cfg_ramp_down_s_A
name: "${friendly_name} A Fade Down Time (s)"
entity_category: config
unit_of_measurement: s
icon: mdi:timer-sand-complete
mode: slider
min_value: 0
max_value: 60
step: 1
lambda: |-
return (float) id(ramp_down_ms_A) / 1000.0f;
set_action:
- lambda: |-
int secs = (int) floorf(x + 0.5f);
if (secs < 0) secs = 0;
if (secs > 60) secs = 60;
id(ramp_down_ms_A) = secs * 1000;
id(cfg_ramp_down_s_A).publish_state((float) secs);
- platform: template
id: cfg_ramp_up_s_B
name: "${friendly_name} B Fade Up Time (s)"
entity_category: config
unit_of_measurement: s
icon: mdi:timer-sand
mode: slider
min_value: 0
max_value: 60
step: 1
lambda: |-
return (float) id(ramp_up_ms_B) / 1000.0f;
set_action:
- lambda: |-
int secs = (int) floorf(x + 0.5f);
if (secs < 0) secs = 0;
if (secs > 60) secs = 60;
id(ramp_up_ms_B) = secs * 1000;
id(cfg_ramp_up_s_B).publish_state((float) secs);
- platform: template
id: cfg_ramp_down_s_B
name: "${friendly_name} B Fade Down Time (s)"
entity_category: config
unit_of_measurement: s
icon: mdi:timer-sand-complete
mode: slider
min_value: 0
max_value: 60
step: 1
lambda: |-
return (float) id(ramp_down_ms_B) / 1000.0f;
set_action:
- lambda: |-
int secs = (int) floorf(x + 0.5f);
if (secs < 0) secs = 0;
if (secs > 60) secs = 60;
id(ramp_down_ms_B) = secs * 1000;
id(cfg_ramp_down_s_B).publish_state((float) secs);
- platform: template
id: led_output_set_pct_A
name: "${friendly_name} A Output Set (0-100)"
icon: mdi:tune
mode: slider
min_value: 0
max_value: 100
step: 1
lambda: |-
const auto &cv = id(mosfet_leds_A).current_values;
float actual = cv.is_on() ? (cv.get_brightness() * 100.0f) : 0.0f;
float minp = (float) id(min_brightness_pct_A);
float maxp = (float) id(max_brightness_pct_A);
if (maxp <= minp) maxp = minp + 1.0f;
if (actual <= 0.0f) return 0.0f;
float pos = (actual - minp) * 100.0f / (maxp - minp);
if (pos < 0.0f) pos = 0.0f;
if (pos > 100.0f) pos = 100.0f;
return floorf(pos + 0.5f);
set_action:
- if:
condition:
lambda: 'return x <= 0.0f;'
then:
- lambda: 'id(suppress_slider_sync_A) = true;'
- script.stop: ramp_on_script_A
- script.stop: ramp_off_script_A
- light.turn_off:
id: mosfet_leds_A
transition_length: 200ms
- lambda: |-
id(led_output_set_pct_A).publish_state(0);
id(last_brightness_pct_A) = 0.0f;
id(last_set_pos_A) = 0;
- delay: 400ms
- lambda: 'id(suppress_slider_sync_A) = false;'
else:
- lambda: |-
id(suppress_slider_sync_A) = true;
float pos = x;
if (pos < 1.0f) pos = 1.0f;
if (pos > 100.0f) pos = 100.0f;
id(led_output_set_pct_A).publish_state((int) floorf(pos + 0.5f));
float minp = (float) id(min_brightness_pct_A);
float maxp = (float) id(max_brightness_pct_A);
if (maxp <= minp) maxp = minp + 1.0f;
float out_pct = minp + (pos * (maxp - minp) / 100.0f);
if (out_pct > maxp) out_pct = maxp;
id(restore_target_pct_A) = out_pct;
const auto &cv = id(mosfet_leds_A).current_values;
float curr = cv.is_on() ? (cv.get_brightness() * 100.0f) : 0.0f;
id(last_ramp_ms_A) = (out_pct > curr) ? id(ramp_up_ms_A) : id(ramp_down_ms_A);
- script.stop: ramp_off_script_A
- script.stop: ramp_on_script_A
- script.execute: ramp_to_target_script_A
- delay: !lambda 'return (uint32_t) id(last_ramp_ms_A);'
- lambda: 'id(suppress_slider_sync_A) = false;'
- platform: template
id: led_output_set_pct_B
name: "${friendly_name} B Output Set (0-100)"
icon: mdi:tune
mode: slider
min_value: 0
max_value: 100
step: 1
lambda: |-
const auto &cv = id(mosfet_leds_B).current_values;
float actual = cv.is_on() ? (cv.get_brightness() * 100.0f) : 0.0f;
float minp = (float) id(min_brightness_pct_B);
float maxp = (float) id(max_brightness_pct_B);
if (maxp <= minp) maxp = minp + 1.0f;
if (actual <= 0.0f) return 0.0f;
float pos = (actual - minp) * 100.0f / (maxp - minp);
if (pos < 0.0f) pos = 0.0f;
if (pos > 100.0f) pos = 100.0f;
return floorf(pos + 0.5f);
set_action:
- if:
condition:
lambda: 'return x <= 0.0f;'
then:
- lambda: 'id(suppress_slider_sync_B) = true;'
- script.stop: ramp_on_script_B
- script.stop: ramp_off_script_B
- light.turn_off:
id: mosfet_leds_B
transition_length: 200ms
- lambda: |-
id(led_output_set_pct_B).publish_state(0);
id(last_brightness_pct_B) = 0.0f;
id(last_set_pos_B) = 0;
- delay: 400ms
- lambda: 'id(suppress_slider_sync_B) = false;'
else:
- lambda: |-
id(suppress_slider_sync_B) = true;
float pos = x;
if (pos < 1.0f) pos = 1.0f;
if (pos > 100.0f) pos = 100.0f;
id(led_output_set_pct_B).publish_state((int) floorf(pos + 0.5f));
float minp = (float) id(min_brightness_pct_B);
float maxp = (float) id(max_brightness_pct_B);
if (maxp <= minp) maxp = minp + 1.0f;
float out_pct = minp + (pos * (maxp - minp) / 100.0f);
if (out_pct > maxp) out_pct = maxp;
id(restore_target_pct_B) = out_pct;
const auto &cv = id(mosfet_leds_B).current_values;
float curr = cv.is_on() ? (cv.get_brightness() * 100.0f) : 0.0f;
id(last_ramp_ms_B) = (out_pct > curr) ? id(ramp_up_ms_B) : id(ramp_down_ms_B);
- script.stop: ramp_off_script_B
- script.stop: ramp_on_script_B
- script.execute: ramp_to_target_script_B
- delay: !lambda 'return (uint32_t) id(last_ramp_ms_B);'
- lambda: 'id(suppress_slider_sync_B) = false;'
- platform: template
id: cfg_max_on_hours
name: "${friendly_name} Max On (h)"
entity_category: config
unit_of_measurement: h
icon: mdi:timer-cog
mode: slider
min_value: 0
max_value: 48
step: 1
lambda: |-
return (float) id(max_on_hours);
set_action:
- lambda: |-
int hrs = (int) x;
if (hrs < 0) hrs = 0;
if (hrs > 48) hrs = 48;
id(max_on_hours) = hrs;
id(cfg_max_on_hours).publish_state((float) hrs);
- if:
condition:
lambda: 'return id(mosfet_leds_A).current_values.is_on();'
then:
- script.stop: max_on_watchdog_A
- if:
condition:
lambda: 'return id(max_on_hours) > 0;'
then:
- script.execute: max_on_watchdog_A
- if:
condition:
lambda: 'return id(mosfet_leds_B).current_values.is_on();'
then:
- script.stop: max_on_watchdog_B
- if:
condition:
lambda: 'return id(max_on_hours) > 0;'
then:
- script.execute: max_on_watchdog_B
#:########################################################################################:#
# SCRIPT COMPONENT:
# https://esphome.io/components/script.html
#:########################################################################################:#
script:
# Ramps: Channel A
- id: ramp_on_script_A
mode: restart
then:
- lambda: 'id(is_ramping_A) = true;'
- script.stop: ramp_off_script_A
- light.turn_on:
id: mosfet_leds_A
brightness: !lambda 'return id(max_brightness_pct_A) / 100.0f;'
transition_length: !lambda 'return (uint32_t) id(ramp_up_ms_A);'
- delay: !lambda 'return (uint32_t) id(ramp_up_ms_A);'
- lambda: |-
id(is_ramping_A) = false;
const auto &cv = id(mosfet_leds_A).current_values;
if (cv.is_on()) {
float pct = cv.get_brightness() * 100.0f;
id(last_brightness_pct_A) = pct;
if (pct > 0.5f) id(last_nonzero_brightness_pct_A) = pct;
}
- id: ramp_to_target_script_A
mode: restart
then:
- lambda: 'id(is_ramping_A) = true;'
- script.stop: ramp_off_script_A
- light.turn_on:
id: mosfet_leds_A
brightness: !lambda 'return id(restore_target_pct_A) / 100.0f;'
transition_length: !lambda 'return (uint32_t) id(last_ramp_ms_A);'
- delay: !lambda 'return (uint32_t) id(last_ramp_ms_A);'
- lambda: |-
id(is_ramping_A) = false;
const auto &cv2 = id(mosfet_leds_A).current_values;
if (cv2.is_on()) {
float pct = cv2.get_brightness() * 100.0f;
id(last_brightness_pct_A) = pct;
if (pct > 0.5f) id(last_nonzero_brightness_pct_A) = pct;
}
- id: ramp_off_script_A
mode: restart
then:
- lambda: |-
id(is_ramping_A) = true;
id(ramping_for_off_A) = true;
- script.stop: ramp_on_script_A
- light.turn_off:
id: mosfet_leds_A
transition_length: !lambda 'return (uint32_t) id(ramp_down_ms_A);'
- delay: !lambda 'return (uint32_t) id(ramp_down_ms_A);'
- lambda: |-
id(is_ramping_A) = false;
id(ramping_for_off_A) = false;
id(last_brightness_pct_A) = 0.0f;
id(last_set_pos_A) = 0;
id(led_output_set_pct_A).publish_state(0);
- id: max_on_watchdog_A
mode: restart
then:
- if:
condition:
lambda: 'return id(max_on_hours) > 0;'
then:
- delay: !lambda 'return (uint32_t) (id(max_on_hours) * 3600000UL);'
- if:
condition:
lambda: 'return id(mosfet_leds_A).current_values.is_on();'
then:
- lambda: |-
id(ramp_switch_target_on_A) = false;
id(mosfet_ramp_switch_a).publish_state(false);
- script.stop: ramp_on_script_A
- script.execute: ramp_off_script_A
- id: deferred_restore_brightness_A
mode: restart
then:
- delay: 5s
- lambda: |-
float target = id(last_nonzero_brightness_pct_A);
float minp = (float) id(min_brightness_pct_A);
float maxp = (float) id(max_brightness_pct_A);
if (target > 0.0f && target < minp) target = minp;
if (target > maxp) target = maxp;
id(restore_target_pct_A) = target;
id(last_ramp_ms_A) = id(ramp_up_ms_A);
- if:
condition:
lambda: 'return id(restore_target_pct_A) > 0.5f;'
then:
- lambda: |-
id(ramp_switch_target_on_A) = true;
id(suppress_slider_sync_A) = true;
id(suppress_quick_on_A) = true;
- script.stop: ramp_off_script_A
- script.execute: ramp_to_target_script_A
- delay: !lambda 'return (uint32_t) id(last_ramp_ms_A);'
- lambda: |-
id(suppress_slider_sync_A) = false;
id(suppress_quick_on_A) = false;
else:
- lambda: 'id(ramp_switch_target_on_A) = false;'
- light.turn_off:
id: mosfet_leds_A
transition_length: 0s
# Ramps: Channel B
- id: ramp_on_script_B
mode: restart
then:
- lambda: 'id(is_ramping_B) = true;'
- script.stop: ramp_off_script_B
- light.turn_on:
id: mosfet_leds_B
brightness: !lambda 'return id(max_brightness_pct_B) / 100.0f;'
transition_length: !lambda 'return (uint32_t) id(ramp_up_ms_B);'
- delay: !lambda 'return (uint32_t) id(ramp_up_ms_B);'
- lambda: |-
id(is_ramping_B) = false;
const auto &cv = id(mosfet_leds_B).current_values;
if (cv.is_on()) {
float pct = cv.get_brightness() * 100.0f;
id(last_brightness_pct_B) = pct;
if (pct > 0.5f) id(last_nonzero_brightness_pct_B) = pct;
}
- id: ramp_to_target_script_B
mode: restart
then:
- lambda: 'id(is_ramping_B) = true;'
- script.stop: ramp_off_script_B
- light.turn_on:
id: mosfet_leds_B
brightness: !lambda 'return id(restore_target_pct_B) / 100.0f;'
transition_length: !lambda 'return (uint32_t) id(last_ramp_ms_B);'
- delay: !lambda 'return (uint32_t) id(last_ramp_ms_B);'
- lambda: |-
id(is_ramping_B) = false;
const auto &cv2 = id(mosfet_leds_B).current_values;
if (cv2.is_on()) {
float pct = cv2.get_brightness() * 100.0f;
id(last_brightness_pct_B) = pct;
if (pct > 0.5f) id(last_nonzero_brightness_pct_B) = pct;
}
- id: ramp_off_script_B
mode: restart
then:
- lambda: |-
id(is_ramping_B) = true;
id(ramping_for_off_B) = true;
- script.stop: ramp_on_script_B
- light.turn_off:
id: mosfet_leds_B
transition_length: !lambda 'return (uint32_t) id(ramp_down_ms_B);'
- delay: !lambda 'return (uint32_t) id(ramp_down_ms_B);'
- lambda: |-
id(is_ramping_B) = false;
id(ramping_for_off_B) = false;
id(last_brightness_pct_B) = 0.0f;
id(last_set_pos_B) = 0;
id(led_output_set_pct_B).publish_state(0);
- id: max_on_watchdog_B
mode: restart
then:
- if:
condition:
lambda: 'return id(max_on_hours) > 0;'
then:
- delay: !lambda 'return (uint32_t) (id(max_on_hours) * 3600000UL);'
- if:
condition:
lambda: 'return id(mosfet_leds_B).current_values.is_on();'
then:
- lambda: |-
id(ramp_switch_target_on_B) = false;
id(mosfet_ramp_switch_b).publish_state(false);
- script.stop: ramp_on_script_B
- script.execute: ramp_off_script_B
- id: deferred_restore_brightness_B
mode: restart
then:
- delay: 5s
- lambda: |-
float target = id(last_nonzero_brightness_pct_B);
float minp = (float) id(min_brightness_pct_B);
float maxp = (float) id(max_brightness_pct_B);
if (target > 0.0f && target < minp) target = minp;
if (target > maxp) target = maxp;
id(restore_target_pct_B) = target;
id(last_ramp_ms_B) = id(ramp_up_ms_B);
- if:
condition:
lambda: 'return id(restore_target_pct_B) > 0.5f;'
then:
- lambda: |-
id(ramp_switch_target_on_B) = true;
id(suppress_slider_sync_B) = true;
id(suppress_quick_on_B) = true;
- script.stop: ramp_off_script_B
- script.execute: ramp_to_target_script_B
- delay: !lambda 'return (uint32_t) id(last_ramp_ms_B);'
- lambda: |-
id(suppress_slider_sync_B) = false;
id(suppress_quick_on_B) = false;
else:
- lambda: 'id(ramp_switch_target_on_B) = false;'
- light.turn_off:
id: mosfet_leds_B
transition_length: 0s
Reference in New Issue View Git Blame Copy Permalink