zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
cafc856a3c4a6844c93f1498287cad770b7ef5cc
zorruno-homeassistant/esphome/esp-officelights.yaml
T

326 lines
11 KiB
YAML
Raw Blame History

#:########################################################################################:#
# TITLE: OFFICE MAIN LIGHTSWITCH
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-officelights.yaml
#:########################################################################################:#
# VERSIONS:
# v2.1 2026-02-25 Updated yaml to zorruno layout V1.1
# v2.0 2025-06-05 YAML Tidyups
# v1.0 2025-05-31 Initial Version
#:########################################################################################:#
# HARDWARE:
# - Zemismart KS-811 Triple push button (ESP8266)
# - Pinout/Schematic: https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
#:########################################################################################:#
# OPERATION NOTES:
# - Office 3-gang KS-811 (Triple) wall switch.
# - Button 1 toggles Relay 1 (Nighttime Lights) - only relay actually wired to a load.
# - Button 2 toggles Relay 2 (Daytime Lights) - virtual only (no physical load connected).
# - Button 3 toggles Relay 3 (Spare) - virtual only (no physical load connected).
# - GPIO16 does not support interrupts; polling is used for Button 1.
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant OFFLINE, WiFi OK
# - Physical buttons still control relays locally.
# - MQTT is optional; device operates as a normal switch without HA.
#
# b) MQTT OFFLINE (or broker unreachable)
# - Physical buttons still control relays locally.
# - HA/API control (if available) still works, but no MQTT command/status.
#
# c) Entire WiFi/Network OFFLINE
# - Physical buttons still control relays locally.
# - Accurate time is NOT needed (SNTP not needed).
#:########################################################################################:#
#:########################################################################################:#
# SUBSTITUTIONS: Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
# Device Naming
device_name: "esp-officelights"
friendly_name: "Office Main Lightswitch (3)"
description_comment: "Office Main Lightswitch using a Zemismart KS-811 Triple Push Button. Bunker Light A (1), Spare A (2), Spare B (3) (Layout V1.1)"
device_area: "Office"
# Project Naming
project_name: "Zemismart Technologies.KS-811 Triple"
project_version: "v2.1"
# Passwords & Secrets
api_key: !secret esp-api_key
ota_pass: !secret esp-ota_pass
static_ip_address: !secret esp-officelights_ip
mqtt_command_main_topic: !secret mqtt_command_main_topic
mqtt_status_main_topic: !secret mqtt_status_main_topic
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
# Don't forget to switch it back when changed.
current_ip_address: ${static_ip_address}
# Device Settings
log_level: "INFO"
update_interval: "60s"
# MQTT LOCAL Controls
# Topic that remote things will use to command this locally without HA
mqtt_local_device1_name: "office-main-lights-left"
mqtt_local_command1_topic: "${mqtt_command_main_topic}/${mqtt_local_device1_name}"
mqtt_local_status1_topic: "${mqtt_status_main_topic}/${mqtt_local_device1_name}"
mqtt_local_device2_name: "office-main-lights-right"
mqtt_local_command2_topic: "${mqtt_command_main_topic}/${mqtt_local_device2_name}"
mqtt_local_status2_topic: "${mqtt_status_main_topic}/${mqtt_local_device2_name}"
# Switch Naming
switch_1_name: "Nighttime Lights" # Only one light (Bunker Light) actually connected to this relay
switch_2_name: "Daytime Lights" # Virtual only, no power connected to 2nd relay
switch_3_name: "Spare" # Virtual only, no power connected to 3rd relay
#:########################################################################################:#
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
local_current_ip_address: "${current_ip_address}"
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
common_api: !include
file: common/api_common.yaml
#file: common/api_common_noencryption.yaml
vars:
local_api_key: "${api_key}"
#### MQTT ####
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
#### DIAGNOSTICS Sensors ####
diag_basic: !include common/include_basic_diag_sensors.yaml
diag_more: !include common/include_more_diag_sensors.yaml
#diag_debug: !include common/include_debug_diag_sensors.yaml
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
#:########################################################################################:#
# ESPHOME
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}"
area: "${device_area}"
project:
name: "${project_name}"
version: "${project_version}"
#on_boot:
# priority: 200
# then:
# - switch.turn_on: relay_3
#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK
# https://esphome.io/components/esp8266.html
#:########################################################################################:#
esp8266:
board: esp01_1m
early_pin_init: false
board_flash_mode: dout
#:########################################################################################:#
# LOGGING
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
level: "${log_level}"
#baud_rate: 0
id: logger_id
#:########################################################################################:#
# STATUS LED
# https://esphome.io/components/status_led.html
#:########################################################################################:#
status_led:
pin:
number: GPIO2
inverted: true
#:########################################################################################:#
# BINARY SENSORS
# https://esphome.io/components/binary_sensor/
#:########################################################################################:#
binary_sensor:
# Button 1 (GPIO16) - polling (GPIO16 has no interrupts)
- platform: gpio
pin:
number: GPIO16
mode: INPUT
inverted: true
use_interrupt: false
name: "Button 1: ${switch_1_name}"
on_press:
- switch.toggle: Relay_1
# Button 2 (GPIO05)
- platform: gpio
pin:
number: GPIO05
mode: INPUT
inverted: true
name: "Button 2: ${switch_2_name}"
on_press:
- switch.toggle: Relay_2
# Button 3 (GPIO4)
- platform: gpio
pin:
number: GPIO4
mode: INPUT
inverted: true
name: "Button 3: ${switch_3_name}"
on_press:
- switch.toggle: Relay_3
#:########################################################################################:#
# MQTT COMPONENT:
# Device-specific MQTT command triggers
# https://esphome.io/components/mqtt.html
#:########################################################################################:#
mqtt:
on_message:
- topic: "${mqtt_local_command1_topic}"
payload: "On"
then:
- script.stop: relay_1_timer_script
- switch.turn_on: Relay_1
- topic: "${mqtt_local_command1_topic}"
payload: "Off"
then:
- script.stop: relay_1_timer_script
- switch.turn_off: Relay_1
- topic: "${mqtt_local_command1_topic}"
then:
- lambda: |-
if (x.empty()) {
return;
}
bool numeric_payload = true;
for (char c : x) {
if (c < '0' || c > '9') {
numeric_payload = false;
break;
}
}
if (!numeric_payload) {
return;
}
const int timer_seconds = atoi(x.c_str());
if (timer_seconds < 1 || timer_seconds > 3600) {
return;
}
id(relay_1_timer_script)->execute(timer_seconds * 1000);
- topic: "${mqtt_local_command2_topic}"
payload: "On"
then:
- script.stop: relay_2_timer_script
- switch.turn_on: Relay_2
- topic: "${mqtt_local_command2_topic}"
payload: "Off"
then:
- script.stop: relay_2_timer_script
- switch.turn_off: Relay_2
- topic: "${mqtt_local_command2_topic}"
then:
- lambda: |-
if (x.empty()) {
return;
}
bool numeric_payload = true;
for (char c : x) {
if (c < '0' || c > '9') {
numeric_payload = false;
break;
}
}
if (!numeric_payload) {
return;
}
const int timer_seconds = atoi(x.c_str());
if (timer_seconds < 1 || timer_seconds > 3600) {
return;
}
id(relay_2_timer_script)->execute(timer_seconds * 1000);
#:########################################################################################:#
# SCRIPT COMPONENT:
# Relay 1 timer script
# mode: restart means a new valid timer value restarts the timer from zero
# https://esphome.io/components/script.html
#:########################################################################################:#
script:
- id: relay_1_timer_script
mode: restart
parameters:
timer_duration_ms: int
then:
- switch.turn_on: Relay_1
- delay: !lambda "return timer_duration_ms;"
- switch.turn_off: Relay_1
- id: relay_2_timer_script
mode: restart
parameters:
timer_duration_ms: int
then:
- switch.turn_on: Relay_2
- delay: !lambda "return timer_duration_ms;"
- switch.turn_off: Relay_2
#:########################################################################################:#
# SWITCH
# https://esphome.io/components/switch/
#:########################################################################################:#
switch:
# Relay 1 (GPIO13)
- platform: gpio
name: "Relay 1: ${switch_1_name}"
pin: GPIO13
id: Relay_1
# Relay 2 (GPIO12)
- platform: gpio
name: "Relay 2: ${switch_2_name}"
pin: GPIO12
id: Relay_2
# Relay 3 (GPIO14)
- platform: gpio
name: "Relay 3: ${switch_3_name}"
pin: GPIO14
id: Relay_3
Reference in New Issue View Git Blame Copy Permalink